Hey, I have a Visual Land Connect 7 running on Android 4.0.4. I would like to update it to 4.1.1 because on JB the inderface is much smoother and it would be less glitchy on my tablet. I tried checking for an update but it said that I need an update.zip in order to see if I am capable of an update. I looked online to see if I could get an update.zip...but it seemed to me that in order for me to get an update, I will have to have a certain device. I tried looking for a update.zip for my device and had no such luck...Now my only real option is to ask forums...to see if that helps. Information about the device will be linked below. Thank you in advance for any help you can provide.
-Brian Salazar
Visual Land Connect 7:
Model: VL-879
Android: 4.0.4
Baseband: 1.5re3
Build Number: 97F2-D1-H1-MO1-1382.20121106
I bought my daughter an android tablet for Christmas running ics, however since getting it we have trouble installing apps. On setting up the play store it allows one or two apps to be installed and then throws up an rpc error or unable to validate your account error. This happens regardless of wether I use my gmail or my daughters. The manufacturers have been less than helpful, blaming our gmail accounts (even though both work fine on other devices).
These are the device specs:
Android version 4.0.4
Model A13MID
Baseband 1.5
Kernel [email protected] #32
Build number nuclear_zync-eng 4.0.4 Imm76d 20121106 test-keys
I should point out that I'm looking to change the rom on her tablet to try and improve her tablets function.
Thanks
Jim
Hello, and thanks to all who take the time to read this and offer their support.
To everyone else... just hello.
Okay.
I have a few of those cheap Chinese 7" tablets so common on e-Bay these days. For the price, most of these are okay and seem to run fairly well "as-is" without having to spend a lot of time rooting them or installing CFW. This one however is just a little bit different.
Here's the deal... The tablet I'm going to be addressing in this thread has a ROM that was not customized for the retailer very well. The particular combination of apps and services it has causes the tablet to perform horribly. I'd really like to change this. The problem is however that because there are so many of these around these days, many of these generic units have not been "developed." Because of this, rooting these devices or replacing the ROM's is often very difficult if not downright impossible. At times, even identifying the specifics of the hardware. This tablet is one of those.
I've tried just about everything I can think of to simply modify the ROM it has in a way that would make it work better, but there are a few apps installed that are locked and impossible to modify or remove. I've come to the conclusion at this point that if possible, installing a custom ROM is going to be the only way to "fix" it. I have been able to root the device, but I have not been able to replace the recovery app , nor have I been able to identify a ROM that might be able to be installed once I do.
What I need from you folks.
If I supply every scrap of information I can come up with about this tablet, would someone please be willing to tell me which ROM just might work, and how I can use the recovery app that's installed to install it? If so, thank you.
Here's the information.
Options available in the installed recovery app.
A. Apply update from ADB
B. Apply update from external storage.
C. Apply update from cache.
Here's the tablet information.
Brand: ZTO
Model: N1 PLUS (Generic Chinese 7" tablet)
Android version: 4.1.1
Baseband version: v0.4rc3
Kernal version: 3.0.8+
Build number: N1 PLUS_wifi-7601_V4.1.1 JR003C 20131202
And again, Thank you.
Hello! I am one of many of the SCH-R530(X) users and I would like to upgrade to the best available ROM Kernel & Firmware for my device. I am unsure of what carrier it is on, the device does not have active service, and I bought it for $20 USD about a year or so ago
There currently is no SD card installed but I do have 16GB internal - it is running Android 4.3 Jelly Bean with developers options enabled -
I'm running Baseband Version R530XWWUBMK4 with build number JSS15J.530XWWUBMK4
The kernel version:
3.0.31-2116674
[email protected] #1
Fri Nov 22 19:13:23 KST 2013
SE for Android Status
Enforcing
SEPF_SCH-R530X_4.3_0100
Hardware Version
R530X.01
Now that the nitty/gritty is posted above, I would like to figure out the easiest way to get this ROOTED and have it completely up to date! If I can get Android Pay working with the NFC reader that would be stupendous! I almost installed a malware riddled version of towelroot 4.3 from one of the similar threads, seems this device has been deprecated for a few years now, however I loved the S3 and personally owned an SCH-I535 which lasted me for a good year and a half, unfortunately a friend has taken this device, and installed the guts into another phone for his dad.
I'd like to get this up to date, and try some new apps on it. Any recommendations, or information pertaining to my model would be certainly useful!
Thanks so much XDA and I hope to get some responses!
PriusVapor said:
Hello! I am one of many of the SCH-R530(X) users and I would like to upgrade to the best available ROM Kernel & Firmware for my device. I am unsure of what carrier it is on, the device does not have active service, and I bought it for $20 USD about a year or so ago
There currently is no SD card installed but I do have 16GB internal - it is running Android 4.3 Jelly Bean with developers options enabled -
I'm running Baseband Version R530XWWUBMK4 with build number JSS15J.530XWWUBMK4
The kernel version:
3.0.31-2116674
[email protected] #1
Fri Nov 22 19:13:23 KST 2013
SE for Android Status
Enforcing
SEPF_SCH-R530X_4.3_0100
Hardware Version
R530X.01
Now that the nitty/gritty is posted above, I would like to figure out the easiest way to get this ROOTED and have it completely up to date! If I can get Android Pay working with the NFC reader that would be stupendous! I almost installed a malware riddled version of towelroot 4.3 from one of the similar threads, seems this device has been deprecated for a few years now, however I loved the S3 and personally owned an SCH-I535 which lasted me for a good year and a half, unfortunately a friend has taken this device, and installed the guts into another phone for his dad.
I'd like to get this up to date, and try some new apps on it. Any recommendations, or information pertaining to my model would be certainly useful!
Thanks so much XDA and I hope to get some responses!
Click to expand...
Click to collapse
Your phone appears to be very similary to the i747.
You can probably flash ROMs from that device.
You will get better replies if you posted here https://forum.xda-developers.com/galaxy-s3-all
PriusVapor said:
Hello! I am one of many of the SCH-R530(X) users and I would like to upgrade to the best available ROM Kernel & Firmware for my device. I am unsure of what carrier it is on, the device does not have active service, and I bought it for $20 USD about a year or so ago
There currently is no SD card installed but I do have 16GB internal - it is running Android 4.3 Jelly Bean with developers options enabled -
I'm running Baseband Version R530XWWUBMK4 with build number JSS15J.530XWWUBMK4
The kernel version:
3.0.31-2116674
[email protected] #1
Fri Nov 22 19:13:23 KST 2013
SE for Android Status
Enforcing
SEPF_SCH-R530X_4.3_0100
Hardware Version
R530X.01
Now that the nitty/gritty is posted above, I would like to figure out the easiest way to get this ROOTED and have it completely up to date! If I can get Android Pay working with the NFC reader that would be stupendous! I almost installed a malware riddled version of towelroot 4.3 from one of the similar threads, seems this device has been deprecated for a few years now, however I loved the S3 and personally owned an SCH-I535 which lasted me for a good year and a half, unfortunately a friend has taken this device, and installed the guts into another phone for his dad.
I'd like to get this up to date, and try some new apps on it. Any recommendations, or information pertaining to my model would be certainly useful!
Thanks so much XDA and I hope to get some responses!
Click to expand...
Click to collapse
Download Kingoroot for pc and install it.
Enable USB debugging on your phone and connect it to your pc using a USB cable.
Connect your pc to internet.
Open Kingoroot, it will detect your phone automatically.
Click the root button and wait for the process to complete.
Augustoandro said:
Download Kingoroot for pc and install it.
Enable USB debugging on your phone and connect it to your pc using a USB cable.
Connect your pc to internet.
Open Kingoroot, it will detect your phone automatically.
Click the root button and wait for the process to complete.
Click to expand...
Click to collapse
Is there a safer alternative? I have heard that KingRoot may contain adware/spyware and that's the last thing I need. I'd also like some instructions/information as to perhaps the latest ROM, hopefully working with Android Pay (I know it's possible!)
PriusVapor said:
Is there a safer alternative? I have heard that KingRoot may contain adware/spyware and that's the last thing I need. I'd also like some instructions/information as to perhaps the latest ROM, hopefully working with Android Pay (I know it's possible!)
Click to expand...
Click to collapse
Not KingRoot but Kingoroot. Both are different.
I've found a cheap alternative solution to broadcast FM radio to bluetooth headsets. Here is the Link
=-]
Hi there,
two years ago I got an Tablet named Archos 70b copper.
From the beginning I wondered why it is so slow - even
my older Samsung Galaxy 10.1 n was faster than this tablet.
Well, I found a way to use it as a display for my surveilance
cameras and to control my smart home devices.
Now I want to take a little more use out of it, for example
I want to control more devices and so on.
During my search for information in the web I read some
posts about flashed Archos devices which were much
faster after flashing it with a foreign firmware. So I
tried to find out, what alternate firmware would run
on my 70b Copper.
But after a lot of reasearch I just found postings for
the Archos 70b ebook reader and so on but nothing
for my device.
Finally I got here, did a search and found... nothing.
So I decided to ask for help.
Can anyone tell me, what foreign firmware would
run on my device give me some support for the
flashing process?
My target is to run just programs which are absolutely
necessary for my usage. I dont need those **** like
Google Video, Google Movies, Gallery, my pictures,
Gmail, Google drive, Hangouts and all the other things
which are installed with android.
Here is the information for my tablet:
Model: AC70BCV
Device: archos 70b Copper
Android Version. 4.4.2
Baseband Version: MOLY.WR8W1315.MD.WG.MP.V72, 2015/01/03 14:56
Kernel Version: 3.4.67 [email protected] #2 Tue Sep. 29 09:14:01 CST 2015
Build- Nummer: [email protected]
Oh and last but not least, I would prefer German language assistance.
Thx.
Azrael