Related
Sup guys!
Im so down, because i hade 2 days ago CWM 7.2.0 1.0.8 on my Xperia Mini Pro and i was bored so i just got the CM 9.0.0 1.1.1 and if just seen on it that my battery goes very fast down on that rom the camera is bad and no flashlight working so i choosed the HYBROM v14 and got the .KRsH Kernel v3.0 (MiniPro) and flashed the HYBROM v14 and it didnt work. I turn on my phone it vibrates i see the boot logo after 3 minutes it show me a black screen and then it restart again and do it allways the same if tried it with CM 9.0.0 1.1.1 boot.img with nero droid boot.img and with rage kernel boot.img and it happens allways the same on some kernels i cant enter the CWM. I tried with flashtool to got the 62. kernel from XperiaMiniPro_4.0.2.A.0.62_SK17.ftf and it doesn do andything now i tried three times to flash SK17i_4.0.2.A.0.62__1251-0103_.ftf but it is allways the same it freezes at sony ericsson logo and then after some time i got a black screen and then it restart.
What should i do please help me
I need my phone so early !
1.Have krsh kernel
2.do full wipe, clear cache
3.clear dalvik
4.in mounts and storage,do format system,format data,format cache.
5.Install the rom.
perhaps it'll work..
But before i try to do this, i have to say if tried to set back my phone with WotanClient i cant use SEUS because i have unlocked the bootloader.
So if done it but it starts with Virbation and Sony Ericsson Logo after 2-3 Minute it's black with backlight on and after 30 sec. it restarts again all the time.
But thx ill gonna try it.
EDIT://
No it didnt work because i cant enter with krsh kernel not with 1.6 or 2.0 the CWM so if tried it with the x kernel and i can enter the CWM but i tried it like u said but it doesnt change anything after boot logo it freezes gets quickly phased black and restarts.
First download the custom ROM .zip file and place it on the root of your SDcard.
Then install the kernel you have chosen via Flashtool or fastboot.
Then you will need a ClockworkMod Recovery(or any other recovery, but this is the most popular). Some kernels have it already built in, check in the kernel description.
Next, enter the Recovery by pressing volume down button many times, when phone boots and screen goes brighter. Then make factory reset, wipe cache and Dalvik Cache(last one is under Advanced). Then install zip from sdcard and choose your ROM's zip.
Oh, and if you don't know, which kernel to choose, then for Hybrom ROM should Rage Kernel and X Kernel work, I have had both on my LWW, both were good.
Yeah dude but i know how to do that all but it even dont boot it doesnt matter wichs rom or kernel i choose it allways stuck and sony ericsson logo and then it gets black and restarts.
If tried 2 firmwares with WotanClient and tried to flash a firmware.
It's just the same all the time.
What to do?
****ing damn ****.
My battery is empty and i cant charge my phone :/
The green led just blinking every 10 seconds quickly and when i try to turn it on it just vibrates and thats all.
What to do?
Does just anyone can help me pleeeease !
If you install a custom kernel, then, depending on the kernel of course, mostly you don't get the Sony Ericsson Logo.
So, you might be doing something wrong there with the kernel, as it doesn't get installed and that causes the problem.
Ok it do it like this:
- I go to my fastboot folder
- I have there:
* adb.exe
* AdbWinApi.dll
* AdbWinUsbApi.dll
* boot.img (the one wich i want)
* fastboot.exe
- I hold shift and click the right mouse button and press command prompt..
- i enter in the cmd: "fastboot -i 0xfce flash boot boot.img" because "fastboot flash boot boot.img" dont work it never worked for me
- i wait till its done
- i unplug it
- i start my phone its not working
And now i cant do something because my battery is dead and i cant charge it
When you use custom kernel like krsh rage or x, they'll have offline charging.. U just plugin your charger(not usb) it'll charge i guess so...
If flashed my phone again with Wotan and now i can charge it.
But its stucking at Sony Ericsson logo when it try's to charge.
And boot is again ****ed it justs like all the time freezing allways and then black and restart.
Is there a way to check whats broken or to set it back with a another way?
EDIT://
I flashed
- Xperia_Relock_bootloader.ftf then
- SK17i_4.0.2.A.0.62__1251-0103_.ftf and at last
- XperiaMiniPro_4.0.2.A.0.62_SK17.ftf
Not i can run the SEUS it says i have the newest version but i pressed install.
I hope it will fix the problem
EDIT2://
****ing damn **** -.-
Its like all the time the same ****.
Why cant anyone help me
#Push
Help please..
did you tried to flash any other firmware (eg. Stock 4.0.A.2.368) via flashtool?
try also to flash stock krenel, then relock bootloader and restore the firmware via PCCompanion
By the way, did you unlocked your device with test point or official method?
maybe both of them?
I unlocked my phone with the offical method and relocked it with Xperia_Relock_bootloader.ftf and it worked.
But when i flash my phone with Wotan and SEUS then my phone should be like i buyed it new or not?
Sorry for my terrible english.
EDIT://
I cant find any ftf for download, the only ftf wich i found for download was "SK17i_4.0.2.A.0.62__1251-0103_.ftf" and all other if downloaded with Wotan..
JDMStar said:
I unlocked my phone with the offical method and relocked it with Xperia_Relock_bootloader.ftf and it worked.
I cant find any ftf for download, the only ftf wich i found for download was "SK17i_4.0.2.A.0.62__1251-0103_.ftf" and all other if downloaded with Wotan..
Click to expand...
Click to collapse
Got It!
you should lock BL ONLY with 0.368 stock FW
I will give you links soon.
wait about 30 minutes...
Ok
If flashed my phone with Wotan to "Stock 4.0.A.2.368" but no improvement. :/
And i cant change my boot.img anymore cause its locked ****..
Great) try to unlock BL again (official)
re-install 368 (to be shure its installed)
then apply this stuff with flashtool
kadr said:
Great) try to unlock BL again (official)
re-install 368 (to be shure its installed)
then apply this stuff with flashtool
Click to expand...
Click to collapse
Thx but i dont helps
It just freezing at Sony Ericsson Logo..
even with 368 ?
did you tried to launch it with opened/closed BL ?
Yeah with 368, it doesnt mateter if i start my phone with locked bootloader or without :/
what was the reason?
what was the last working configuration?
what changes you did?
Hello.
I have rooted the xperia U using the flashtool by following a guide available on xda. Everything worked fine. I wanted to install a custom rom for which I had unlock my bootloader and flash a custom recovery for flashing the rom. I downloaded and flashed cwm. So I unlocked the bootloader using the official method, i flashed the boot.img of the custom rom(in fastboot) and tried to go to recovery, but my phone wouldn't switch ON now.
I was able to make it reach flashboot mode(green) and tried flashing ftf.. Even that's not working.
The service update software is not even detecting my phone.
Please help.:crying:
When you say, not switching on, can you feel it vibrate when you push the power button?
Also whats the error you receive on flashtool?
Yes, i do
But the screen is blank and I can only see the red notification light
rohitbalan said:
But the screen is blank and I can only see the red notification light
Click to expand...
Click to collapse
May be you flashed wrong kernel, which is not for your phone.
Try to charge the phone for a few hours and after thats try flashmode again to flash stock rom...
same problem
Actually I am facing the same issue u had with your Sony xperia u. Please help.
Charge the battery, seems gone flat. Leave it on charge for half an hour or so. If that doesn't work maybe the software is corrupted to the point it doesn't cold boot to charge, so charge battery separately using external charger for half an hour or so. It should be able to boot at least to flash mode (Vol Down + Power).
Hello, My lww had a hard brick after I invent installing the ROM Delicious Sandwich, I was trying to resurrect it, did exit the boot screen, and was having one bootlooping. And my idea was to try to install another ROM on it, trying to fix and be able to use it normally. But he was discharged and connected to the PC, and in the middle of the installation the wireless energy unintentionally disconnected him and hung up, clearing the forced installation! When I reboot and try to access the CWM, now no longer goes out of the boot screen SONY. :crying:
My device is:
- wt19i
- Locked Bootloader
- ROM that happened was that bug: Pureness V5
WHAT TO DO!? I NEED HELP!
Sorry my english
Why not try to flash via flashtool?
It's not hardbricked. It's just a normal softbrick
Download a stock ftf for your device and flash it in flashmode using flashtool. It should work well then
Sent from my Nexus 4 running Android 4.4
You can't hard brick device with unwritable bootloader (xperias). It's simply not possible, cause you can always enter flash mode for locked devices and fastboot for unlocked ones.
Hi Guys, i had a little problem during the flash. 1ºst, sorry for my poor english... :/ I'll start a course in 2014 =D
Ok, i can't boot my phone, cause i damaged my vol- button :/ There's a way using test points to boot into flash mode? The phone are frozen at sony black screen.
I don't know any other way using other methods.
I had diassembled the phone and i used a clip to "make contact" (I don't no how to say it in english).
Please, sorry for my poor english...
hi
fliperama said:
Hi Guys, i had a little problem during the flash. 1ºst, sorry for my poor english... :/ I'll start a course in 2014 =D
Ok, i can't boot my phone, cause i damaged my vol- button :/ There's a way using test points to boot into flash mode? The phone are frozen at sony black screen.
I don't know any other way using other methods.
I had diassembled the phone and i used a clip to "make contact" (I don't no how to say it in english).
Please, sorry for my poor english...
Click to expand...
Click to collapse
i help you flashing with testpoint..... pm me
Hi, I'm not experienced with custom roms, so I bricked my phone trying to install cyanogenmod, please help me
I tried to install custom rom on my xperia p so I unlocked bootloader, rooted and got recovery. Everything seemed to be fine until i tried to flash cyanogenmod, I can't provide link because I'm new user. Using Flashtool I accidentally (not knowing exactly what I'm doing) chose "select system to Flash" and klicked on boot.img from this pack. After several minutes without respond it showed only "Please check the log before rebooting into system" so I disconnected phone. When I try to start, it only shows sony logo for a short while and then it resets, and shows it again and resets... I can only reset it by holding vol+ and power button until it vibrates 3 times, then I can put it in fastboot mode.
Please tell me, what should I do now. And sorry for my bad english.
Flash stock, flash the boot.img in fastboot mode, reboot and flash the zip.
If you did not copy the zip yet boot after flash and copy.
Thank You very much. Everything works fine now, excepting data access via mobile network. I'll try to find the answer in another thread. Thanks again!
Guys, I'm desperate.
Today my note 5 show this new update, 9.15.19, I just click to update. Something just went wrong and the phone stucked in Updating screen with the MI logo and the message to don not rebot the phone.
After that I can't do anything, if I restart the phone, it stucks back again in the same uptade screen. If I go to fastboot mode, I can't flash any ROM, I get the "Flash XBL Error" and I didn't unlock the bootloader.
Please, somebody have any idea that I can try???
ewertonveccheitti said:
Guys, I'm desperate.
Today my note 5 show this new update, 9.15.19, I just click to update. Something just went wrong and the phone stucked in Updating screen with the MI logo and the message to don not rebot the phone.
After that I can't do anything, if I restart the phone, it stucks back again in the same uptade screen. If I go to fastboot mode, I can't flash any ROM, I get the "Flash XBL Error" and I didn't unlock the bootloader.
Please, somebody have any idea that I can try???
Click to expand...
Click to collapse
You haven't mentioned that you did wipe data or not?
ewertonveccheitti said:
Guys, I'm desperate.
Today my note 5 show this new update, 9.15.19, I just click to update. Something just went wrong and the phone stucked in Updating screen with the MI logo and the message to don not rebot the phone.
After that I can't do anything, if I restart the phone, it stucks back again in the same uptade screen. If I go to fastboot mode, I can't flash any ROM, I get the "Flash XBL Error" and I didn't unlock the bootloader.
Please, somebody have any idea that I can try???
Click to expand...
Click to collapse
If u didn't unlock the bootloadee how can you fastboot flash
Damn, I've just deleted everything I wrote here...
Okay then, check you phone version on the back cover(search for MEG7 for global, MEE7, MET7 for china), download correct ROM(look for it on en.miui.com in your phone threads, or ask me later if you need link, I'll give you it from my browser history) and follow steps here
The best solution is to find right ROM version for your phone, download miflash and flash "fastboot rom".(If bootloader is locked it doesnt mean that you cant flash official miui rom for your phone).
And here's the link to flash
Via Recovery:
China_V9.6.2.0.NEGCNFD
Global_V9.5.11.0.NEGMIFA
Via Fastboot:
China_V9.6.2.0.NEGCNFD
Global_V9.5.11.0.NEGMIFA
Have a nice day.