Related
Dear
Is there any custom rom kitkat based for karbonn titanium s1 plus?
How we remove the apps from custom rom and how we rebuild it.
thanks in ad
ClockWorkMod Recovery 6.0.4.9 - Download
Terminal Emulator - Download
Place it in /sdcard and rename the file recovery.img
Run the terminal emulator and
type: su (press enter)
Then type: dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18 (press enter)
CyanogenMod 11 [Kitkat 4.4.4] - Download
Password: fxpj
Download This package
Extract it to sd card
Boot into Recovery by Powering on while holding power and vol+ Button.you'll see a green screen...Keep holding untill the screen turns red.
Goto Mounts and storage and format /Cache and /Data. Format /SYSTEM if installing new rom.
Goto Advanced and format Dalvik Cache
Select Apply Zip from SD Card
Select Cyanogenmod 11 zip file of rom to install and wait.
Dear
thanks for reply
I have not rooted the phone. Can i flash CyanogenMod 11 [Kitkat 4.4.4] and ClockWorkMod Recovery 6.0.4.9,
Terminal Emulator without rooting the phone?
If i rooted the phone and flash CWM and ROM Manager then Terminal Emulator is necessary to install.
please explain.
thanks
Rooting?
desiboyz said:
Dear
thanks for reply
I have not rooted the phone. Can i flash CyanogenMod 11 [Kitkat 4.4.4] and ClockWorkMod Recovery 6.0.4.9,
Terminal Emulator without rooting the phone?
If i rooted the phone and flash CWM and ROM Manager then Terminal Emulator is necessary to install.
please explain.
thanks
Click to expand...
Click to collapse
Did you managed to root the phone? how?
Hey im just rooted my device successfully. Can i upgrade my rom using built in system updater? There is option to upgrade from sd card.
Sent from my Titanium S1 Plus using XDA Free mobile app
nanachitang420 said:
Did you managed to root the phone? how?
Click to expand...
Click to collapse
hii just download the android kingo rom google any root any phone :laugh::laugh::laugh::laugh:
Sippay said:
ClockWorkMod Recovery 6.0.4.9 - Download
Terminal Emulator - Download
Place it in /sdcard and rename the file recovery.img
Run the terminal emulator and
type: su (press enter)
Then type: dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18 (press enter)
CyanogenMod 11 [Kitkat 4.4.4] - Download
Password: fxpj
Download This package
Extract it to sd card
Boot into Recovery by Powering on while holding power and vol+ Button.you'll see a green screen...Keep holding untill the screen turns red.
Goto Mounts and storage and format /Cache and /Data. Format /SYSTEM if installing new rom.
Goto Advanced and format Dalvik Cache
Select Apply Zip from SD Card
Select Cyanogenmod 11 zip file of rom to install and wait.
Click to expand...
Click to collapse
error no space left on device
Same problem
spice mi 270 said:
error no space left on device
Click to expand...
Click to collapse
I'm also having this problem on my device pls give me a working cwm for titanium s1 plus
THANKS IN ADVANCE
spice mi 270 said:
error no space left on device
Click to expand...
Click to collapse
Are you rooted? Can you extract stock recovery for S1 plus and upload here?
Thanks in advance.
yes i am rooted
nanachitang420 said:
Are you rooted? Can you extract stock recovery for S1 plus and upload here?
Thanks in advance.
Click to expand...
Click to collapse
Yes I have rooted mobile and after flashing cwm from terminal emulator I lost my original recovery and even not got the cwm not working..... please help me...
thanks in advance
Try to extract boot.img..
mkmandar123 said:
Yes I have rooted mobile and after flashing cwm from terminal emulator I lost my original recovery and even not got the cwm not working..... please help me...
thanks in advance
Click to expand...
Click to collapse
Me not rooted but flashed CWM S1 with Fastboot and worst tried to insert files to system.img and even overwrite that partition, in turn the phone is just booting only upto boot logo, If you are in position to extract boot.img then please try and upload here. That can be used to build CWM working for our device. If any body gets flash files for S1 plus from service centre then best. We can easily build CWM.
nanachitang420 said:
Me not rooted but flashed CWM S1 with Fastboot and worst tried to insert files to system.img and even overwrite that partition, in turn the phone is just booting only upto boot logo, If you are in position to extract boot.img then please try and upload here. That can be used to build CWM working for our device. If any body gets flash files for S1 plus from service centre then best. We can easily build CWM.
Click to expand...
Click to collapse
How to go in fastboot mode??
mkmandar123 said:
How to go in fastboot mode??
Click to expand...
Click to collapse
Please check you message box. Have given you the details.
Two ways:
1. ADB way. Start adb after connecting phone to PC and type adb devices. If device is shown Titanium then type in cmd "adb reboot bootloader" phone will reboot in fastboot mode.
2. Key combinations: switch off the phone. Press power button and volume up button simultaneously till you see boot logo. connect to PC and see in device manager, you will see a device called Karbonn bootloader interface under title: Karbonn devices.
Try to extract boot.img as per the method given in message box .
mkmandar123 said:
Yes I have rooted mobile and after flashing cwm from terminal emulator I lost my original recovery and even not got the cwm not working..... please help me...
thanks in advance
Click to expand...
Click to collapse
how did u managed to flash cwm,can u plz explain the steps bcoz m getting error that no space left on device and yup m rooted need cwm recovery any how...plz anyone help
---------- Post added at 11:48 AM ---------- Previous post was at 11:42 AM ----------
nanachitang420 said:
Are you rooted? Can you extract stock recovery for S1 plus and upload here?
Thanks in advance.
Click to expand...
Click to collapse
Yes m rooted but dont know how to extract stock recovery,tell me steps I will surely upload it
Got recovery.img and boot.img for S1 plus
I got boot.img and recovery.img for S1 plus now need only cwm or twrp developer...hoping for best..anyone reply asap
Sent from my Titanium S1 Plus using XDA Premium 4 mobile app
titanum s1 plus
spice mi 270 said:
I got boot.img and recovery.img for S1 plus now need only cwm or twrp developer...hoping for best..anyone reply asap
Sent from my Titanium S1 Plus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
hii i need a stock recovery image.
because iam earese it from my phone when flashing another cwm which is not for titanium s1 plus
thanks
shivkiran9 said:
hii i need a stock recovery image.
because iam earese it from my phone when flashing another cwm which is not for titanium s1 plus
thanks
Click to expand...
Click to collapse
Download from here. Contains both, stock boot.img and stock recovery.img. Thanks to Spice mi for providing them!!
Bro its my old phone name spice mi 270,my name is Shivam
Sent from my Titanium S1 Plus using XDA Premium 4 mobile app
Hiii...
Is there any 1 custom rom for s1 plus???
I tried with cynogenmod 11 which provided in previous messages in this forum but it gives some errors..
Sent from my Titanium S1 Plus using XDA Free mobile app
akshykhade said:
Hiii...
Is there any 1 custom rom for s1 plus???
I tried with cynogenmod 11 which provided in previous messages in this forum but it gives some errors..
Sent from my Titanium S1 Plus using XDA Free mobile app
Click to expand...
Click to collapse
For rom we need recovery frst
Sent from my C6603 using XDA Premium 4 mobile app
---------- Post added at 06:17 PM ---------- Previous post was at 06:16 PM ----------
For rom we need recovery frst
Sent from my C6603 using XDA Premium 4 mobile app
Finally rooted the phone using Kingroot. Now advancing towards porting a custom recovery for the device. The needed files are stock boot.img and recovery.img of the device. My problem is I have tried all the following ways for their extraction -
1) RomDump script 0.72b by Sebastian404
2) cat proc/mtd
3) log_data to find in which partition the recovery belongs to
But no luck, for all.
anybody, who can help me?
Please don't suggest adb process.
aakashabhinav said:
Finally rooted the phone using Kingroot. Now advancing towards porting a custom recovery for the device. The needed files are stock boot.img and recovery.img of the device. My problem is I have tried all the following ways for their extraction -
1) RomDump script 0.72b by Sebastian404
2) cat proc/mtd
3) log_data to find in which partition the recovery belongs to
But no luck, for all.
anybody, who can help me?
Please don't suggest adb process.
Click to expand...
Click to collapse
If u have rooted your phone thn download flashify and backup boot img and recovery img from there.. Thn it will be in your sdcard flashify folder
Hope it helps
Regards
my phone was bricked how to solve this problem
my coolpad dazen 1 was bricked after flashing recovery.img after rooted..
and it got error like "download and instal the packag? this may expose the device falt and hidden troubles."
please help it's urgent... :angel:
use bootloader to flash stock recovery
Bibhudutta Das said:
my coolpad dazen 1 was bricked after flashing recovery.img after rooted..
and it got error like "download and instal the packag? this may expose the device falt and hidden troubles."
please help it's urgent... :angel:
Click to expand...
Click to collapse
i was having the same problem
i tried flashing cwm recovery which was for coolpad f1 plus (as it is same device with qualcomm processor)
and after flashing my device was unable to boot (or stuck on bootloader)
but it can be cured....
you have to download the batch program developed by cool community
and dazen 1 adb drivers
(you will need the stock recovery to put back your device to life)
replace both the given recoveries in the batch program folder with stock recovery and rename it
then enter bootloader mode (both volume buttons+power button)
open batch program on your pc and press 1 and click enter
now connect your device to pc and press vol. up button to continue
and its done.
now I am trying to flash a stable recovery
I am new to Xda so sorry in advance if i missed something
feel free to ask.....
Full guide for unbrick dazen 8297L-100
In the attachment there are stock boot and recovery images and link for downloadin the cool comunity batch programe
jaswant singh said:
In the attachment there are stock boot and recovery images and link for downloadin the cool comunity batch programe
Click to expand...
Click to collapse
where is the attachment?? plz help..
bonny1256 said:
i was having the same problem
i tried flashing cwm recovery which was for coolpad f1 plus (as it is same device with qualcomm processor)
and after flashing my device was unable to boot (or stuck on bootloader)
but it can be cured....
you have to download the batch program developed by cool community
and dazen 1 adb drivers
(you will need the stock recovery to put back your device to life)
replace both the given recoveries in the batch program folder with stock recovery and rename it
then enter bootloader mode (both volume buttons+power button)
open batch program on your pc and press 1 and click enter
now connect your device to pc and press vol. up button to continue
and its done.
now I am trying to flash a stable recovery
I am new to Xda so sorry in advance if i missed something
feel free to ask.....
Click to expand...
Click to collapse
Hello Friend,
Please post the download link for the
1 . stock rom
2. stock recovery
3. and the batch program which you have mentioned.
4. dazen 1 adb drivers
and any other resources which you used to bring your dazen out of brick.
Thanks
Finally fixed my dazen 1.....
Ho....ffff......
Finally managed to bring my dazen back to life... Thanks to bonny1256 for the information..
Found the batch script after serching all forums almost searched down all internet..
Used the recovery that i had backed up using flashify.. I will upload the stock recovery and link to the tool. Shortly... Once again thanks to @bonny1256..
---------- Post added at 12:58 AM ---------- Previous post was at 12:54 AM ----------
The recoveries in the zip is for coolpad F1 plus which need to be replaced by the stock recovery of dazen 1...
---------- Post added at 01:27 AM ---------- Previous post was at 12:58 AM ----------
stock recovery: https://drive.google.com/file/d/0By_nubQ5FzzoSnBiSl9JaGR1YW8/view?usp=sharing
Drivers: http://download.yulong.com///DOWNLOAD_INFO/20141203151613244(4).rar
Note:: this tool will temporarily install recovery.. So after reboot flash the recovery with flashify for a properly working recovery in your phone..
regards..
techy97 said:
Finally rooted the phone using Kingroot. Now advancing towards porting a custom recovery for the device. The needed files are stock boot.img and recovery.img of the device. My problem is I have tried all the following ways for their extraction -
1) RomDump script 0.72b by Sebastian404
2) cat proc/mtd
3) log_data to find in which partition the recovery belongs to
But no luck, for all.
anybody, who can help me?
Please don't suggest adb process.
Click to expand...
Click to collapse
Try..
adb shell
cat /proc/partitions
Or
adb shell
ls -al /dev/block/platform/7824900.sdhci/by-name
need to know partition details of dazen 1
bonny1256 said:
i was having the same problem
i tried flashing cwm recovery which was for coolpad f1 plus (as it is same device with qualcomm processor)
and after flashing my device was unable to boot (or stuck on bootloader)
but it can be cured....
you have to download the batch program developed by cool community
and dazen 1 adb drivers
(you will need the stock recovery to put back your device to life)
replace both the given recoveries in the batch program folder with stock recovery and rename it
then enter bootloader mode (both volume buttons+power button)
open batch program on your pc and press 1 and click enter
now connect your device to pc and press vol. up button to continue
and its done.
now I am trying to flash a stable recovery
I am new to Xda so sorry in advance if i missed something
feel free to ask.....
Click to expand...
Click to collapse
hi @bonny1256
plz help me know the system partition of coolpad dazen 1..
run this
adb shell
ls -al /dev/block/platform/7824900.sdhci/by-name
i had used it to dump system.img.. i am stuck in bootloop after ota..
plz run the command and upload screenshot...
thanks..
Please send the boot.img and recovery.img for coolpad dazen 1.
My mail id is [email protected]
Send Image
Send me the stock recovery and the boot image with instructions on how to get stock rom on my dazen1 pls send it at [email protected]
hi my dazen 1 is showing waiting for the device after using all this... can any one please help me to get correct procedure. please share complete procedure with required software and links @ [email protected]
Please help to recover my phone. It was rooted using Kingroot and while installing OTA update it got bricked.
Is any way to flash full rom or firmware in our device
hey guyss,,,
Sent from my Coolpad 8297L-I00 using XDA Premium 4 mobile app
---------- Post added at 06:20 PM ---------- Previous post was at 06:16 PM ----------
ArjunrambZ said:
hey guyss,,,
Sent from my Coolpad 8297L-I00 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
we need to start a new team for our phone ,so that development can be started
please comment below if ur interested
thanks
Sent from my Coolpad 8297L-I00 using XDA Premium 4 mobile app
Hi, I have rooted my dazen 1 , now waiting for custom recovery and ROMs to test
vishwasnp said:
Hi, I have rooted my dazen 1 , now waiting for custom recovery and ROMs to test
Click to expand...
Click to collapse
did you root using kingroot ?
Yes, used Kingroot
I am facing lots of issues with call log and sms , they suddenly don't update or become non responsive. Any way to replace them ?
Hi Guys
Finally Its time for us to celebrate. Lenovo A6000 with Lolipop is here
Download Official Stock Rom Lolipop From Here
Installation Method
1.Download the zip
2.Place it in root of your external sd card
3.Boot into stock recovery
4.Select apply update from sdcard
5.point to the zip file
6.Wait till the installation get finished.
Download And Enjoy
Thank Me if i Helped You
Is it just me or everyone has low internal space available after upgrading to lollipop. I have only 2GB usable space, nearly 11GB is used by the system.
EDIT: I factory reset and now all space is back. Lollipop runs great!
Will installation failed as before status 14
failure!!!Were you able to boot into lollipop rom?
How can I root this?
Sent from my Lenovo A6000 using XDA Free mobile app
no need to root the device to install the Lollipop update.
Only we need the CWM and install the CWM recovery image through ADB flash boot.
Just backup the system and install the new update.
IT ends with a status 14 error and shows the installation aborted .... message.
No problem just reboot the device to enjoy the new update.
Muppuri said:
no need to root the device to install the Lollipop update.
Only we need the CWM and install the CWM recovery image through ADB flash boot.
Just backup the system and install the new update.
IT ends with a status 14 error and shows the installation aborted .... message.
No problem just reboot the device to enjoy the new update.
Click to expand...
Click to collapse
Yeah, i have already installed it. I wanted to know how to root it. Kingoroot is not working.
Please help me my lenovo a6000 is not booting into system or recovery only fastest even after factory rest clear cache and dalvik installing stock rom ?
---------- Post added at 02:03 PM ---------- Previous post was at 02:00 PM ----------
rahulsnair said:
Hi Guys
Finally Its time for us to celebrate. Lenovo A6000 with Lolipop is here
Download Official Stock Rom Lolipop From Here
Installation Method
1.Download the zip
2.Place it in root of your external sd card
3.Boot into stock recovery
4.Select apply update from sdcard
5.point to the zip file
6.Wait till the installation get finished.
Download And Enjoy
Thank Me if i Helped You
Click to expand...
Click to collapse
Please help me my lenovo a6000 is not booting into system or recovery only fastest even after factory rest clear cache and dalvik installing stock rom ?
To revert into STOCK ROM
To revert back to stock do the following:
1) install the ADB tools into your p.c.,
2) copy the recovery.img (download it from mediafire) into the installed ADB folder (C:\Program Files (x86)\Minimal ADB) ,
3) copy the stock/Updated ROM into the SD card of your device,
4) install the lenovo drivers if not installed already and connect your device to the pc and run the following commands at the "C:\Program Files (x86)\Minimal ADB " folder
i) adb devices (to check the device is connected or not)
ii) adb reboot Bootloader (boots the device into Bootloader / Fastboot Mode),
iii) fastboot boot recovery.img , ( to install the CWM into the device, but it lasts for next reboot only),
iv) within the CWM run the commands,
wipe dalwick cache ,
wipe/factory reset including the 'system' ,
v) now choose the option "install zip " from the CWM and choose " install from external SD card" and select the STOCK Rom / LOLLIPOP Rom and press yes to install the ROM,
vi) after getting the "installation finished " message, now reboot the device to get the installed ROM.:
cool:
---------- Post added at 03:05 PM ---------- Previous post was at 02:57 PM ----------
To root the device , just copy the root-SuperSU.xxx.zip file into the SD card and update the zip file within the CWM environment and roboot the device.
Hi Rahul,
I've downloaded the new OTA update for Lenovo A6000. Where do I find it..? I've searched on lenovoota folder, but it is empty..!!
gladiator9120 said:
File not found on your Google Drive. Can you please re-upload it.
Click to expand...
Click to collapse
http://phonedl.ota.lenovomm.com/dls/v6/Kraft-A6000_S058_151030_KK2L_WC67.zip
Sent from my GT-I9300I using Tapatalk
Hello, i want to install this official s58 rom. Im with lenovo a6000 one sim and dont have official update for my phone. I want to install this , but pls tell me this rom have any bugs ? how much free space , any lag ?
Sparco21 said:
Hello, i want to install this official s58 rom. Im with lenovo a6000 one sim and dont have official update for my phone. I want to install this , but pls tell me this rom have any bugs ? how much free space , any lag ?
Click to expand...
Click to collapse
It is much better than any other update 1- extract in your sd card
2- install your country.Ota.zip
3-install system.zip
http://phonedl.ota.lenovomm.com/dls/v6/Kraft-A6000_S058_151030_KK2L_WC67.zip
Sent from my GT-I9300I using Tapatalk
Thank you man.
Ahmad Tawfik said:
It is much better than any other update 1- extract in your sd card
2- install your country.Ota.zip
3-install system.zip
http://phonedl.ota.lenovomm.com/dls/v6/Kraft-A6000_S058_151030_KK2L_WC67.zip
Sent from my GT-I9300I using Tapatalk
Click to expand...
Click to collapse
Can I directly flash the Zip using Stock Recovery or Do I have to flash Country OTA zip & System Zip separate?
no flash separately or installation will be aported
Sent from my GT-I9300I using Tapatalk
Ahmad Tawfik said:
no flash separately or installation will be aported
Sent from my GT-I9300I using Tapatalk
Click to expand...
Click to collapse
Sure..Thanks
Hello, when i install system.zip and mycountry.ota, Should I flash boot.img from system.zip or not ? only install system.zip and .ota and reboot ?
Sparco21 said:
Hello, when i install system.zip and mycountry.ota, Should I flash boot.img from system.zip or not ? only install system.zip and .ota and reboot ?
Click to expand...
Click to collapse
when you install system.zip the boot.img is installed too
no need
Sent from my GT-I9300I using Tapatalk
Sparco21 said:
Hello, when i install system.zip and mycountry.ota, Should I flash boot.img from system.zip or not ? only install system.zip and .ota and reboot ?
Click to expand...
Click to collapse
Install country ota zip & system zip.. No other steps needed.. Your device will reboot by itself & get upgraded to Lollipop
Sent from my Lenovo A6000 using Tapatalk
I recently got a Lenovo k30-t from my uncle because he messed up the system, after flashing twrp and Cyanogen mod everything was working fine. Twrp released an update and I wanted to update it, so I flashed that and the phone now works normally except for the fact that I can't boot in to recovery. Not thru android also not with adb. I reflashed the recovery I used originally and nothing happens. Still the same issue. And if I use 'fastboot boot recovery.img' I get an error. I found an other recovery and with 'fastboot boot recovery.img' I can boot in to it, but when flashing I get the error that the file is too large, how can I fix this.
use flashify or sp flashtool
KiwiTheOne said:
I recently got a Lenovo k30-t from my uncle because he messed up the system, after flashing twrp and Cyanogen mod everything was working fine. Twrp released an update and I wanted to update it, so I flashed that and the phone now works normally except for the fact that I can't boot in to recovery. Not thru android also not with adb. I reflashed the recovery I used originally and nothing happens. Still the same issue. And if I use 'fastboot boot recovery.img' I get an error. I found an other recovery and with 'fastboot boot recovery.img' I can boot in to it, but when flashing I get the error that the file is too large, how can I fix this.
Click to expand...
Click to collapse
flash the recovery.img file using flashify or spflashtools and make sure you use a working twrp for ur device ...
Romeotamizh said:
flash the recovery.img file using flashify or spflashtools and make sure you use a working twrp for ur device ...
Click to expand...
Click to collapse
Just tried that and it flashed fine, boot I still can't boot in to it. Whatever method I try to get in to recovery I end up on a Lenovo screen with fastboot. It's not in bootloader mode tho
KiwiTheOne said:
Just tried that and it flashed fine, boot I still can't boot in to it. Whatever method I try to get in to recovery I end up on a Lenovo screen with fastboot. It's not in bootloader mode tho
Click to expand...
Click to collapse
Yeah dude it happens when the twrp u flashed is incompatible for ur device
Romeotamizh said:
Yeah dude it happens when the twrp u flashed is incompatible for ur device
Click to expand...
Click to collapse
But it works if I use that same recovery with fastboot boot
KiwiTheOne said:
But it works if I use that same recovery with fastboot boot
Click to expand...
Click to collapse
K how much is the size of ur new recovery image
Romeotamizh said:
K how much is the size of ur new recovery image
Click to expand...
Click to collapse
The new recovery TWRP 3.0.2.0 is 25032KB
KiwiTheOne said:
The new recovery TWRP 3.0.2.0 is 25032KB
Click to expand...
Click to collapse
Yeah thats the problem the recovery partition is usually 16mb but this one is 24 mb.. So try to get a new recovery which is less than 16 mb there will be a twrp for ur mobile i guess in xda..
If not send ur stock recovery ill prepare twrp
:good:
Hope it helped
Romeotamizh said:
Yeah thats the problem the recovery partition is usually 16mb but this one is 24 mb.. So try to get a new recovery which is less than 16 mb there will be a twrp for ur mobile i guess in xda..
If not send ur stock recovery ill prepare twrp
:good:
Hope it helped
Click to expand...
Click to collapse
I only have a nandroid backup of the stock rom
KiwiTheOne said:
I only have a nandroid backup of the stock rom
Click to expand...
Click to collapse
Download ur stock firmware from here..
https://docs.google.com/uc?id=0B1708KlPohRRR3JxQkFRdFJuSms
And extract the zip and send me the recovery.img
---------- Post added at 06:28 PM ---------- Previous post was at 06:24 PM ----------
KiwiTheOne said:
I only have a nandroid backup of the stock rom
Click to expand...
Click to collapse
Im not sure of the link.. Google for ur stock firmware
Romeotamizh said:
Download ur stock firmware from here..
https://docs.google.com/uc?id=0B1708KlPohRRR3JxQkFRdFJuSms
And extract the zip and send me the recovery.img
---------- Post added at 06:28 PM ---------- Previous post was at 06:24 PM ----------
Im not sure of the link.. Google for ur stock firmware
Click to expand...
Click to collapse
https://drive.google.com/open?id=0ByIgyvlEk4BDTXpEQVU1WkdIVk0
Here's the stock recovery, thanks for doing this.
hope this works
KiwiTheOne said:
https://drive.google.com/open?id=0ByIgyvlEk4BDTXpEQVU1WkdIVk0
Here's the stock recovery, thanks for doing this.
Click to expand...
Click to collapse
did it in a hurry say me if this doesnt work.. il try tomorrow
https://drive.google.com/open?id=0Bz8BnZ7YvtbOSjhjY1ltZndrdlE
---------- Post added at 06:20 PM ---------- Previous post was at 06:19 PM ----------
Romeotamizh said:
did it in a hurry say me if this doesnt work.. il try tomorrow
https://drive.google.com/open?id=0Bz8BnZ7YvtbOSjhjY1ltZndrdlE
Click to expand...
Click to collapse
flash using flashify
Romeotamizh said:
did it in a hurry say me if this doesnt work.. il try tomorrow
https://drive.google.com/open?id=0Bz8BnZ7YvtbOSjhjY1ltZndrdlE
---------- Post added at 06:20 PM ---------- Previous post was at 06:19 PM ----------
flash using flashify
Click to expand...
Click to collapse
Too bad, Still stuck on the lenovo screen.
I still find it weird how that recovery was incompatible, yet i was still able to boot it.
Romeotamizh said:
did it in a hurry say me if this doesnt work.. il try tomorrow
https://drive.google.com/open?id=0Bz8BnZ7YvtbOSjhjY1ltZndrdlE
---------- Post added at 06:20 PM ---------- Previous post was at 06:19 PM ----------
flash using flashify
Click to expand...
Click to collapse
It's working now!
Not sure if it's using your recovery or the 28mb one, although i think it's the yours.
I changed my rom from CM 12.1 to Ressurection Remix and now i have access to the recovery.
Thanks for all the help.
KiwiTheOne said:
It's working now!
Not sure if it's using your recovery or the 28mb one, although i think it's the yours.
I changed my rom from CM 12.1 to Ressurection Remix and now i have access to the recovery.
Thanks for all the help.
Click to expand...
Click to collapse
Hii Guys..
I need the custom TWRP recovery for my LYF water F1S (LS -5201), so that i can root it and install custom ROMs. Developers i request you to do the needful please.
Regards
My phone also f1s.
Did you had any rom-package or recovery.img?
onkarrathee said:
Hii Guys..
I need the custom TWRP recovery for my LYF water F1S (LS -5201), so that i can root it and install custom ROMs. Developers i request you to do the needful please.
Regards
Click to expand...
Click to collapse
Try using this guide
https://forum.xda-developers.com/android/software/guide-how-to-compile-twrp-source-step-t3404024
Guys...i have found a page for the stock rom for LYF water F1s Ls-5201. You can download it from here
I also extracted the stock recovery image from device and here is the link https://drive.google.com/file/d/0BwMCGOjWJuaxY0NSemJ6ZzdNU1U/view?usp=sharing
Also tried the method to make TWRP for LYF water F1_ LS5201 by @suraj-b method.... but not successful yet. For the process i've used twrp recovery of Le 2 x526.
i'm not a developer but it would be my pleasure if whatever i tried, help somebody.
Don't forget to "Hit THANKS..."
onkarrathee said:
Guys...i have found a page for the stock rom for LYF water F1s Ls-5201. You can download them from there http://www.needrom.com/download/lyf-ls-5201/#
I also extracted the stock recovery image from device and here is the link https://drive.google.com/file/d/0BwMCGOjWJuaxY0NSemJ6ZzdNU1U/view?usp=sharing
Also tried the method to make TWRP for LYF water F1_ LS5201 by @suraj-b method.... but not successful yet. For the process i've used stock recovery of Le 2 x526.
i'm not a developer but i would be my pleasure if whatever i tried, help somebody.
Don't forget to "Hit THANKS..."
Click to expand...
Click to collapse
Good job !
How to flash stock firmware to LYF water F1s Ls-5201
Prepare your system-----
1) Install the Qualcomm usb drivers on your system. Download link
2) Check your PC device manager, your phone should be detected in "Qualcomm HS-USB QDloader 9008" mode. It must detect to start the process.
3) Download the stock firmware from here . The software version downloaded with this link is "LS-5201-S10A_LYF_L13EN_200_170124_09-55-13".
4) Extract the downloaded firmware zip to an folder and rename the "IMAGES_FOR_QMSCT" to "firmware".
5) Download & install the QPST tool. Google it you can find it easily.
6) power off your phone & Make sure your device is charged to at least 50%.
7) Run the installed QFIL from installed programmes. Browse in programmer path to the "prog_emmc_firehose_8976_ddr.mbn" file in the folder where firmware is extracted. It will load the firmware & buid will be selected automatically.
8) Click on load xml and select the "rawprogram_unsparse_without_qcn.xml" if you havn't the backup of NV partition of your device.
If you have the backup NV partition of your device than you can select "rawprogram_unsparse.xml" because this will erase your RF Calibration data, IMEI and WiFi/Bluetooth Address etc. and you will have to restore the NV partition after installing the ROM.
I would suggest you to select "rawprogram_unsparse_without_qcn.xml" & keep it simple.
9) Choose the "patch0.xml" after that.
10) Hold the vol+ & vol- key together and plug usb cable to phone to enter into download mode. As you plug in the QPST tool would recognise your device in QDLoader 9008 mode with com port no. and download button will get activated.
11) Click the download button and sit back, it will take some time.
12) "finish dowload" appear, when process got completed and phone will reboot automatically.
13) Disconnect the device from PC one "android screen" appears (usually it takes 5 min. to appear LYF logo screen from android boot screen)
14) If doesn't reboots, there is some problem & get ready for real hard work .
You might have bricked. In this case just press the power button so than it can power ON. If android screen appears you are lucky enough
-----If android screen remains more than 6-8 minute, you are in bootloop. (It useually takes 5 min for LYF logo to appear after android logo)
-----To switch off your device in case of bootloop, press vol+, vol- & power key together for some time. It will switch off.
-----try to flash the firmware again by above process.
I have tested this method on my device and successfully flashed the stock firmware.
Don't forget to "HIT thanks"...!!!
Credit:
@[email protected] for providing the stock firmware
Me: for testing the procedure
Le2 not support MicroSd.
I will try use recovery of oppo R9plus.
Okey.
It works and rooted by supersu system less package.
I shared recovery.img on https://drive.google.com/open?id=0BwVjewgp3fvLbmtxZ21fSUZhOW8
Or download full package with flash tools and supersu.zip [URL="https://drive.google.com/open?id=0BwVjewgp3fvLUnRHS3NGRjlIRTQ]TWRP-OneKeyFlash-supersu-lyf-water-f1s.rar[/URL]
TWRP recovery LYF_LS-5201
Guys... here is the unofficial twrp recovery for LS-5201. Download it here .
Let me know that you suceed..
This is twrp_unofficial_3.1.0.0 ported from Leeco Le2's TWRP recovery using @suraj-b method and if anythong goes wrong on your device download the stock recovery from the thread and flash it from bootloader.
Try on your own risk..!! :fingers-crossed:
Don't forget to HIT "Thnanks" down there
Please share the adb & fastboot files you used for unloacking bootloader and flashing recovery for the noobs. It would help.
keep it up. :good:
zjsss said:
Okey.
It works and rooted by supersu system less package.
I shared recovery.img on https://drive.google.com/file/d/0BwVjewgp3fvLRm9IM0FOcTF1aGc/view?usp=sharing
Click to expand...
Click to collapse
zjsss said:
Okey.
It works and rooted by supersu system less package.
I shared recovery.img on https://drive.google.com/file/d/0BwVjewgp3fvLRm9IM0FOcTF1aGc/view?usp=sharing
Click to expand...
Click to collapse
How to flash it bro...plzzz give us step by step help
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
zjsss said:
Okey.
It works and rooted by supersu system less package.
I shared recovery.img on https://drive.google.com/file/d/0BwVjewgp3fvLRm9IM0FOcTF1aGc/view?usp=sharing
Click to expand...
Click to collapse
If i flash it via fastboot...den can i root it through twrp...
prashant.palange said:
How to flash it bro...plzzz give us step by step help
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
If i flash it via fastboot...den can i root it through twrp...
Click to expand...
Click to collapse
You can download full package and use "OneKeyFlash(LYF-f1s).bat" to flash easier TWRP-OneKeyFlash-supersu-lyf-water-f1s.rar
zjsss said:
You can download full package and use "OneKeyFlash(LYF-f1s).bat" to flash easier TWRP-OneKeyFlash-supersu-lyf-water-f1s.rar
Click to expand...
Click to collapse
Bro but is it proper twrp for f1s...hv u try it
prashant.palange said:
Bro but is it proper twrp for f1s...hv u try it
Click to expand...
Click to collapse
It works well on my phone.
zjsss said:
It works well on my phone.
Click to expand...
Click to collapse
Thnk u soo much to bring us such wonderfull recovery....but bro...i found 2 issue....1 internal storage is showing empty 0mb and 2 der is no option for root like supersu.zip..plzz help me for dat...m i done wrong anything..plzzz help thank u sooo much brother...it doesn't mount internal storage..i tried mound system and data....but data doesn't mount...plzz help..hope u will understand
prashant.palange said:
Thnk u soo much to bring us such wonderfull recovery....but bro...i found 2 issue....1 internal storage is showing empty 0mb and 2 der is no option for root like supersu.zip..plzz help me for dat...m i done wrong anything..plzzz help thank u sooo much brother...it doesn't mount internal storage..i tried mound system and data....but data doesn't mount...plzz help..hope u will understand
Click to expand...
Click to collapse
It's my bad. This img had bugs.I well try to fix it.
You can copy supersu.zip to MircoSD and install it in TWRP rigtht now.
I checked by adb shell root is success.
Very sorry about that.
zjsss said:
It's my bad. This img had bugs.I well try to fix it.
You can copy supersu.zip to MircoSD and install it in TWRP rigtht now.
I checked by adb shell root is success.
Very sorry about that.
Click to expand...
Click to collapse
U r simply genius brother..root works properly.....god bless u ..love u ....:laugh::good:
Just try to make bugless twrp....thnk u in advance....
prashant.palange said:
U r simply genius brother..root works properly.....god bless u ..love u ....:laugh::good:
Just try to make bugless twrp....thnk u in advance....
Click to expand...
Click to collapse
Thx,i found this not a bug.
/data was locked by system.
Into twrp and keep /system read only,
And wipe /data will be ok .
but it will lost all your data in the phone!!!
So backup everything before you do it.
and install supersu .zip again to root.
zjsss said:
Thx,i found this not a bug.
/data was locked by system.
Into twrp and keep /system read only,
And wipe /data will be ok .
but it will lost all your data in the phone!!!
So backup everything before you do it.
and install supersu .zip again to root.
Click to expand...
Click to collapse
So what should i wipe...dalvik, cache, and data dats it..okay....not system...m i right? But data is not mounting den how can i wipe it?
prashant.palange said:
So what should i wipe...dalvik, cache, and data dats it..okay....not system...m i right? But data is not mounting den how can i wipe it?
Click to expand...
Click to collapse
It doesn't matter of wipe /date or wipe 3.
I guess because the phone kernel was rooted.TWRP had right of wipe.
But not so sure that.