Need Help Desperately - Fire HD 6 and 7 Q&A, Help & Troubleshooting

Hi. I have a Kindle fire HD 6 thats currently rooted on the developer preview 5.0.1.. Ive been try to remove the preview ever since i got it but I can't for three reasons.
1. No recovery mode
Whether I hold power and volume up or adb reboot recovery it just reboots normally and doesn't even try to boot recovery.
Ive had TWRP previously installed and neither that nor stock recovery appear
2. OTA not checking
When I press Check for update its says up to date
3. Cant Factory Reset
Ive tried factory reset through Amazon and the Device itself which both just reboot my device back to the home screen.
If someone could please help me at least get a recovery installed so i can fix this that would be great. I really want to remove fire os completely and have more android experience :good: :fingers-crossed:

You could possibly try the instructions in this thread: http://forum.xda-developers.com/fire-hd/general/how-to-upgrade-to-lollipop-root-gapps-t3163950
I the second post you install TWRP from an adb shell, then go back to the first post to install 5.1.2.
Use at your own risk though.

Related

[Q] Stuck in boot loop, exhausted almost all optons

LG Escape running 4.1.2
here is the progression of events:
1. rooted device
2. root seemed successful and no malfunctions
3. backed up all apps and system data with Titanium backup
4. the lg escape has no way to unlock the bootloader, so I tried various other methods. one of which was entering recovery mode via terminal commands. this is basically a hard reset, and it wiped all my data
5. I restored all my apps and data from my external sd card with titanium
My best guess is this is where something went wrong
6. upon restoration it prompted me to reboot the device
7. reboot passes manufacturer logo, but resets when AT$T logo appears
8. as stated earlier, there is no way to enter recovery mode during boot.
9. there is a hard reset during boot, but mine will not work, as it requires touching buttons which do not seem to be active in my stage of the boot sequence
so, I understand this does NOT mean my phone is bricked, but I don't know how else to get it to boot back up, or what is even causing the boot loop, as I DO NOT HAVE ANY CUSTOM ROMS flashed. any help here is very appreciated!
EDIT: so I have attempted to use adb on my pc to reboot into recovery from there, but it occurred to me that while I was in recovery the first time, I never checked "usb debugging". as a result my adb console commands cant even see my device. any way to turn on usb debugging while locked in a boot loop?
also, I can get it to enter download mode. I was hoping I could just reflash the firmware to it without needing to enable usb debugging, but have no clue how to do that while locked out of the phone.
I realize this is a very specialized set of questions, but it is necessary to ask here as the most people will see it. im open to any ideas
whitechameleon said:
LG Escape running 4.1.2
here is the progression of events:
1. rooted device
2. root seemed successful and no malfunctions
3. backed up all apps and system data with Titanium backup
4. the lg escape has no way to unlock the bootloader, so I tried various other methods. one of which was entering recovery mode via terminal commands. this is basically a hard reset, and it wiped all my data
5. I restored all my apps and data from my external sd card with titanium
My best guess is this is where something went wrong
6. upon restoration it prompted me to reboot the device
7. reboot passes manufacturer logo, but resets when AT$T logo appears
8. as stated earlier, there is no way to enter recovery mode during boot.
9. there is a hard reset during boot, but mine will not work, as it requires touching buttons which do not seem to be active in my stage of the boot sequence
so, I understand this does NOT mean my phone is bricked, but I don't know how else to get it to boot back up, or what is even causing the boot loop, as I DO NOT HAVE ANY CUSTOM ROMS flashed. any help here is very appreciated!
EDIT: so I have attempted to use adb on my pc to reboot into recovery from there, but it occurred to me that while I was in recovery the first time, I never checked "usb debugging". as a result my adb console commands cant even see my device. any way to turn on usb debugging while locked in a boot loop?
also, I can get it to enter download mode. I was hoping I could just reflash the firmware to it without needing to enable usb debugging, but have no clue how to do that while locked out of the phone.
I realize this is a very specialized set of questions, but it is necessary to ask here as the most people will see it. im open to any ideas
Click to expand...
Click to collapse
i have now tried to flash the firmware while in download mode using a less than legitimately obtained lg R&D tool. however, i need V10F_00.kdz and i am facing a bit of censorship. any kind soul willing to host this file on dropbox or similar so i can download it?
Usually devices have a button combination to press when powering on to get into different modes. Maybe try searching for the button combination of your phone on Google? Try ' lg escape button recovery ' ?
J2270A said:
Usually devices have a button combination to press when powering on to get into different modes. Maybe try searching for the button combination of your phone on Google? Try ' lg escape button recovery ' ?
Click to expand...
Click to collapse
believe me i have. the only combo i can get to is download mode. there is a combo for a hard reset, but my touch buttons arent active during boot.

[Q] Bootloop Issue.

Alright, so after having my Fire HD 6 rooted for a few months I started experiencing some random restart issues. I decided to reset to Factory Defaults as I believe that it doesn't touch root (Please verify that one.)
Whenever I clicked on Facotory Reset, however; it immediately restarted and DID NOT RESET.
Then I tried to boot into TWRP and just reflash 4.5.3 (Downgrade) but when I tried to boot into recovery nothing happened, it just booted as normal. Thinking that it was just an error on my part, liking the wrong buttons, etc, I tried running 'adb reboot recovery'
This yielded the same result, just a normal reboot.
I have since unrooted my Kindle to try to update to 5.0.1 (To downgrade again)
Upon trying to update, I restart with no change just like in Factory Reset.
This leaves me with no Root, and no Recovery.
Next I tried using Fastboot to reset it, which now leaves me in a reboot loop that's stuck on the "Fire" logo.
TL;DR:
I have no root, I cannot get into recovery, I cannot access bootloader since ADB doesn't have permission without me giving it (Again, bootloop)
Overall, I'm kind of screwed, any help appreciated.
KeybladePaladin said:
Alright, so after having my Fire HD 6 rooted for a few months I started experiencing some random restart issues. I decided to reset to Factory Defaults as I believe that it doesn't touch root (Please verify that one.)
Whenever I clicked on Facotory Reset, however; it immediately restarted and DID NOT RESET.
Then I tried to boot into TWRP and just reflash 4.5.3 (Downgrade) but when I tried to boot into recovery nothing happened, it just booted as normal. Thinking that it was just an error on my part, liking the wrong buttons, etc, I tried running 'adb reboot recovery'
This yielded the same result, just a normal reboot.
I have since unrooted my Kindle to try to update to 5.0.1 (To downgrade again)
Upon trying to update, I restart with no change just like in Factory Reset.
This leaves me with no Root, and no Recovery.
Next I tried using Fastboot to reset it, which now leaves me in a reboot loop that's stuck on the "Fire" logo.
TL;DR:
I have no root, I cannot get into recovery, I cannot access bootloader since ADB doesn't have permission without me giving it (Again, bootloop)
Overall, I'm kind of screwed, any help appreciated.
Click to expand...
Click to collapse
Please help.... I see you random viewer >.>
I think if someone had an answer they would have posted. Unfortunately, fastboot doesn't work on the 2014 HDs, and it sounds like that's what put you into the bootloop. At this point I think your only option is to contact Amazon for replacement if you're still under warranty.
DoLooper said:
I think if someone had an answer they would have posted. Unfortunately, fastboot doesn't work on the 2014 HDs, and it sounds like that's what put you into the bootloop. At this point I think your only option is to contact Amazon for replacement if you're still under warranty.
Click to expand...
Click to collapse
You're sure fastboot doesn't work? I believe I have used it prior to this with no issues. (By the way, warranty is out >.<)
KeybladePaladin said:
You're sure fastboot doesn't work? I believe I have used it prior to this with no issues. (By the way, warranty is out >.<)
Click to expand...
Click to collapse
Bootloader screen doesn't indicate fastboot mode. Getvar doesn't return anything. If flash commands worked, I'm sure someone would have reported it.
If you haven't tried all button combinations, you should. (You know, hold down power; try power and vol down; try all three.) Without recovery that's all I can suggest. Sorry this happened.
I got the same problem too.
I tried to root and install gapps follow this tutorial. Everything work perfectly.
One day, my Fire's battery was empty and it turned off. I charged it and when it started, it falt in bootloop. The screen show amazon about 8sec and reboot.
I booted into twrp and flashed only 2 files update-kindle-full_ariel-20.5.2.2_user_522053520 and supersu, try to make it work but it didn't
Now, when i hold power button , "Amazon" and then "Fire" appear and it stuck there.
I tried to get into recovery by power and volume+ but didn't work, the screen show "Amazon" and reboot and stuck on "Fire" again.
What should I do now?
Sorry about my English.

Boot problem (Bricked?) Alcatel Pop 4 (5051x)

Good afternoon. I tell my problem.
Upon receiving mobile I decided to apply some improvements on your Android 6.0 system.
The first thing I did was root with Kingoroot, install Flashify to change the recovery; I do around here because they seem to have any accessible recovery. Once I install Titamium programs such as backup and Xposed and everything worked perfect.
I made a backup with recovery installed TWRP 3.0.2-0, a microSD 64 Gbytes and try to check it and restore the copy appears the message "Error extractTarFork () process ended with error: 25".
Since then switched on, enters a loop with minimal screen flash, short vibration and so on cyclically. I have made several attempts:
- I enter recovery (vol + power on) and try to install roms from PC with recovery sideload with adb sideload, but the downside is that I can not find any specific rom of this mobile and other snapdragon 210 Roma does not work.
- Another method was through Mobile Upgrade Q - Alcatel Mobile Phones, put it in Download mode (power on + vol up + vol down) in coming, but when connected to the USB computer when leaving the Download mode and enters the same loop described above.
I would be grateful for any help or idea they could think of. If someone could get a rom of this mobile in zip to install through sideload adb I think it would be the ultimate solution.
Thanks in advance.
Some tips:
Using Mobile Upgrade Q: Turn your phone off and leave to charge until full. Then use Mobile Upgrade Q.
Also, send me a PM and I'll give you the stock partitions and tools to flash them back from windows (No Mobile Upgrade Q Needed)
I tried with Mobile Upgrade Q
I tried to recover with the Mobile Upgrade Q, enters Download mode but jumps back to a loop with a little buzz that is repeated every 2-3 seconds.
The only way I can think of after many tests is to install the rom abd through sideload from the TWRP, then try to load roms other phones with the same processor but ultimately fails.
How can I send you MP?
Hello bro
Can you help me get these partitions please?
PM is bor working for me, don't know why, tried to pm you already
luispelau said:
I tried to recover with the Mobile Upgrade Q, enters Download mode but jumps back to a loop with a little buzz that is repeated every 2-3 seconds.
The only way I can think of after many tests is to install the rom abd through sideload from the TWRP, then try to load roms other phones with the same processor but ultimately fails.
How can I send you MP?
Click to expand...
Click to collapse
Hi if u have twrp, installed I could send u backup of my pop 4
I had the same problem and I managed to unbrick the phone by using this solution I found on XDA.
Go into TWRP recovery. Then click on Advanced. Then click on Terminal and type
echo SYSTEMLESS=true>>/data/.supersu
After that flash SuperSu and reboot the phone. It bootloops once, but after that it boots normal again.
Need help? T.me/pop4uk
mygadgetgeek.com said:
Hi if u have twrp, installed I could send u backup of my pop 4
Click to expand...
Click to collapse
Hey bro, could you send me a backup, i accidently wiped the system and i cant find any stock rom out there, im desperate pls
KieranFoot said:
Some tips:
Using Mobile Upgrade Q: Turn your phone off and leave to charge until full. Then use Mobile Upgrade Q.
Also, send me a PM and I'll give you the stock partitions and tools to flash them back from windows (No Mobile Upgrade Q Needed)
Click to expand...
Click to collapse
Hi,
i know its old but i need the Nonhlos.bin (modem) for 5051x marshmallow. can you please post it here ?
it would be a great help. thanks
Yeah I have a 5051X And its boot freezing not looping should I start a new thread or this gonna need a recovery image like in the OP. I have contacted alcatel supoort to see if they have the flash image but its sunday and I expect that they are closed.
I followed some instructions re rooting my 5051X which involved installing kingroot, obtaining temporary root then using flashy to flash twrp recovery onto the device, I could never update the recovery image and I assume thats because I havn't unlocked my phone yet.
Went to remove kingroot and find it cannot be uninstalled.
So i paid for Supersume (https://play.google.com/store/apps/details?id=darkslide.com.supersumepro&hl=en) and ran that to remove kingroot(i'll prolly reinstall later to follow the guide but dont really trust the application after my lockscreen changed on its own).
Supersume seemed to complete successfully.
Then I decided to reboot the device to see if root had disappeared again after reboot but am now stuck at the alcatel screen for the last 10 mins. Looks like i'm gonna have to pull the battery to shut it down, shame I only had it around a week.

Bricked Honor 7 After flash superSU phone doesn't start

Hi all,
I unblocked my honor 7 PLK-L01 okay,
but when i tried to flash the superSU, to get rooted, after reboot, it never wants to reboot.
I tried:
1- I tried like the manual saying, (press volumeUp+volumeDown+power), then after the first image, i release the power and keep up+down presses,
But instead of going to recovery, the phone keep restarting.
2- i tried to press volumeUp+power, then keep pressing on volumeUp, but also the phone keep restarting,
How ever I can go to bootloader mode, if i press voluemDown.
but when i flashed another twrp, nothing change.
Can someone help please, the phone even stuck on the starting, and can't be recognized as mtp on compter,
or can't goto recovery_mode
Thank you in advance
i think you are kinda messed it up..
you should not flash any thing except stock firmware using emui recovery..
only solution: try and flash twrp again and again to check if it installed correctly.. or send a pic of what it says in the command window when you try to flash twrp..
or you can even try to put an update.app under a dload folder of your sd card and try to flash(do it if you have emui recovery..remember try any other firmware.. not the one you alredy tried)
you should always read forums and look into various things you are not sure about before you even download superSU.zip.... you should try install twrp do full wipe and install rom THEN reboot and you should be fine. make sure that rom is made for your device...

Switched ROMS (Evolution X -> Nusantara) -> NOW Bootloop

Hi Community,
I read some posts how to fix my Problem, but i cant go to a service Point.
So I was using the Evolution X for a long Time (Installed with TWRP 3.1.0).
And now i wanted to change to the Nusantara Project (Vanilla), I did a clean Flash, everything worked i could access the System.
Than i had problems installing Play Store, so i rebooted into Recovery via the System. But now im Stuck in the Loop.
Can i Somehow connect my Phone to the PC and Reset?
Can someone tell me if i Hard/soft bricked my phone ?
Just a little advice, would be really appreciated.
Thanks a lot
Go to TWRP, wipe system, cache, data and dalvik. Now flash nusantra and whichever GApps are recommended for it (if there are no recommendations then use OpenGApps, make sure the architecture is correct). Now wipe dalvik and restart. Sometimes, certain roms begin to bootloop if you boot into the rom first, then try to install gapps later.
If you still have issues, just reflash the stock rom.
I cant access the TWRP anymore, im just stuck on the Bootloader, no matter how i turn on The Phone (Volume Up + Power ON ), (Volume Down + Power), (All 3 Buttons)
Nothing works anymore i dont understand ....
Im searching the net but i cant go to fastboot or something else, its just keeps on rebooting ...
So it's bootlooping, but you cant access recovery?
When the screen turns off, press the key combo and it should go to recovery.
Your best bet is to take it to a service centre, but if that really isn't possible for you, then wait for its battery to drain completely, then when you plug in the charger, instead of turning the phone on, press the key combo to enter the recovery. From there, wipe and flash some other OS.
I've also heard that certain versions of TWRP don't support some roms, leading to a bootloop. In that case, you'll have to use orangefox recovery to flash the rom (orangefox is flashable via twrp)
Yes its Bootlooping.
When i turn it on, on the Left Corner "Recovery Mode" blinks for one second. Than the usual Text appears:
"Orange State
Your Device has been unlocked and cant be trusted
Your Device will boot in 5 Seconds".
So after a couple of seconds (around 10-20 sec)
It turns off and immediately on again. I Just can turn it OFF when i hold all 3 Buttons.
Than i try starting it with Volume up + Power / Volume down + Power, But i cant access Recovery or TWRP.
So i should wait til the battery gets low and try it again ?
Like i said, my custom Rom (Evolutionx) and TWRP just worked fine. I dont know man ...
Well since your bootloader is unlocked, try flashing the stock rom again. Look for a tutorial and follow it.
Hi I managed to unbrick my device with this guide, and im back on a stock rom
Unbrick
i ran following commands to get to my custom rom:
I run adb reboot bootloader,
add executed following commands.
(Pitch Black recovery 3.1)
- adb reboot bootloader
- fastboot flash recovery recovery.img
-fasboot reboot recovery
It just hang up and booted after a while into the normal system.
But im not able to get to the recovery menu ?
When I restart and hold Volume up + Power, i go in a loop and the phone keeps restarting over and over again.
what have i Fu**ed up ?
Do i need another recovery tool ?
sorry guys, i appreciate your help a lot tho !
EDIT: Is my bootloader unlocked ?
I can access via "adb reboot bootloader" the phone
and on the blackscreen on the phone it is written:
oppo verfiy pass
fastboot_unlock_verify ok
Update:
So i tried some Stuff and i got Red State. No Problem i Unbricked it once again and now im on Stock Android 10.
Now im Trying to enable the bootloader again.
I downloaded the In Depth Test_Realme_6.apk but i keep getting the Error that i should update the system.
So should i update the system ?
I cant find a CURRENT Tutorial to make this work, please help...
If you cant find a tutorial for your version, why not downgrade back to a previous one if possible.

Categories

Resources