[FIRMWARE] Stock Firmware For Coolpad Note 3 Lite - Android

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Coolpad Note 3 Lite was launched in 2016, January. The phone comes with a touch screen 5.0 inches with a resolution of 720 x 1280 pixel . The Coolpad Note 3 Lite is powered by 1.3GHz quad-core MediaTek MT6735 processor and it comes with 3GB of RAM. phone packs 16GB of internal storage can be expanded up to 32GB via a microSD card. The Coolpad note 3 Lite comes with a main camera of 13 megapixels on the back and a front 5 megapixels for selfie .
Note Coolpad 3 Lite runs Android 5.1 Cool Ui and is powered by a Non-removable Li-Ion 2500 mAh battery. It measures 140.80 x 70.40 x 8.90 (height x width x thickness) and weighs 152.00 grams. Sensors in the phone include Proximity sensor, Ambient light sensor, Accelerometer, and Gyroscope.
This Firmware For If Your Device Brick Or Bootloop After Installing Custom Rom’S Kernels Or Anything Customized This Firmware Will Revert Back To Stock Rom.
Firmware Details:-
Android Version :- Android Lollipop 5.1 .
Ui Version :- Cool UI
Release Date :- 22.Apr.2016
Model :- Coolpad Note 3 Lite
Status :- Official
Type :- “.Zip” file & Tool.
File Size :- 1.3GB
Open The SP Flash Tool & Click The Download Tab Button.
Now Click Scatter-Loading Button & Browse And Select The MT6735_Android_scatter.txt File From Firmware Folder.
Now Hit The Download Button.
Switch Off Your Phone & Connect Your Phone To The PC.
After The Flashing A Green Tick Will Be Appear.

my coolpad n3 l i install the stock rom with sp flash tool its done the flashing prossed sucess fully done but i swich on the phone and come on display up and down in a black window

shravan0073g said:
my coolpad n3 l i install the stock rom with sp flash tool its done the flashing prossed sucess fully done but i swich on the phone and come on display up and down in a black window
Click to expand...
Click to collapse
Install & Open minimal_adb_fastboot_v1.2_setup.exe On Your PC & Type Or Paste This Command To Verify Your Phone Detected :-
Now Type Or Paste This Command :-
adb devices
adb shell fctest system reboot
Now phone is switched on.

Help!!!
can i insta this stock firmware using TWRP.. if not can you help me with a stockrom that works with TWRP

This method is not working for my phone. After clicking Download method and connecting my phone to pc.. Even after 25 minutes nothing happened but my phone was still charging from pc.....
Can u plz tell how much time does it take and is it required to go to recovery mode to get this done.
Sent from my CP8298_I00 using Indiews

Update
I have unrooted my note 3 lite by using Kingroot, after which my wireless updater app stopped working, I then unrooted my device by disabling root configuration in the kingroot app, after that I uninstalled kingroot, then the wireless updater started working, I checked for update and it showed an update of 14.1 MB I downloaded it but while installing it in the recovery mode it shows error, so please tell me what to do and how to update my device using OTA.

KritikXDA said:
I have unrooted my note 3 lite by using Kingroot, after which my wireless updater app stopped working, I then unrooted my device by disabling root configuration in the kingroot app, after that I uninstalled kingroot, then the wireless updater started working, I checked for update and it showed an update of 14.1 MB I downloaded it but while installing it in the recovery mode it shows error, so please tell me what to do and how to update my device using OTA.
Click to expand...
Click to collapse
Same problem

Hi.I too have same problem how to uninstall root access.

For Rooted Users?
Can rooted coolpad note 3 lite users use this feature?
And afrer this OTA update will work or not? thanks in advance i have downloaded it but not used till now. Waiting for your reply.

is this the original os ??

manoj86561 said:
is this the original os ??
Click to expand...
Click to collapse
Yes it is

Hi can anyone tel me how to root cpn3lite... Full peocedure n flashng roms..... Thank u....

thanx for the rom
Thank you for the rom sir...

Cant flash stock rom in coolpad after suddenly death
Hello my coolpad note 3 lite death suddenly so think to flash stock rom on it sptool but not work its show only red notification light what i can do its show me error message

Related

GALAXY Star 2 Plus/Star Advance SM-G350E Thread

Welcome to Galaxy Star 2 Plus/Star Advance thread !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About SM-G350E
The Samsung GALAXY Star 2 Plus/Advance runs Android KK 4.4.2 and has 1,2 GHz single core processor. It has 4.3'' screen, dual SIM, 1800 mAh battery, 3MP rear camera, 512MB of RAM and 4GB of internal memory
HOW TO ROOT
There are two ways:
1 (The simplest way)- Download and install the Kingo Root app PC through this link: http://www.kingoapp.com/android-root/download.htm
2 (The advanced way)-:
Bby6 said:
What u'll need
1. Desktop or notebook computer (OS Windows XP / Vista / 7/8 / 8.1)
2. Charge smartphone Samsung SM-G350E Galaxy Star Advance at least 30%
3. The original, undamaged MicroUSB cable
4. Download and install Samsung driver (if it is not installed)
5. Download flasher Odin_3.10.0.rar (sews tablets and smartphones the company Samsung)
6. Download the file of a custom CWM Recovery: recovery.tar.rar extract the .md5 file
7. Download the update here: UPDATE-SuperSU-v2.40.zip for Root rights and copy it into the phone memory or sd card
To obtain root permissions
1. Restart your phone to download mode (vol- + menu + power button)
2. Connect the smartphone Samsung SM-G350E Galaxy Star Advance to the computer
3. Run flasher (Odin)
4. Remove the tick" AUTO REBOOT " in ODIN
5. In the PDA select the file recovery.tar.MD5 that you unrared before
6. restart your phone into recovery mode (vol+ + menu + power without releasing till a warning msg come up to the screen)
7.Sew Recovery. After Odin flashed Recovery , disconnect your phone from the PC to remove the battery and put it back
8. Select the file UPDATE-SuperSU.zip and apply it
9. Restart your smartphone, Root received!
It is highly recommended after receiving Root rights to update (if an update) application SuperSu c app store Play Store
Click to expand...
Click to collapse
ROMS
+CM11 ROM for Galaxy Star Advance/2 Plus (by me)
http://forum.xda-developers.com/gal...rom-cyanogenmod-11-galaxy-star-2plus-t3371478
+Rooted Stock ROM (by @Akshay21)
(http://forum.xda-developers.com/gal...tock-rom-samsung-galaxy-star-advance-t3361029)
+CyanogenMod 12.1 for higgs2g (by @ahtesham01)
(http://forum.xda-developers.com/gal...yanogenmod-12-1-samsung-galaxy-star-t3421905/)
RECOVERIES
-CWM (http://forum.xda-developers.com/general/general/root-samsung-galaxy-star-2-plus-star-t3004395)
-TWRP 3 (http://forum.xda-developers.com/gal...p-3-0-0-recovery-galaxy-star-advance-t3374275)
THANKS (For the moment) TO:
@Bby6 for CWM recovery and Odin
@Chainfire for SuperSU zip
@kingoapp for the root app
@ahtesham01 for TWRP and CM12.1
@Akshay21 for deodexed rooted stock ROM
@me
If you like this thread, press Thanks Button for support my work, I'm only a 12 years old moroccan guy
Nice brother hope this may help to Those Kk users
Hello Guys PlZ I need ROM lollipop for Me Star 2 plus
lion2554 said:
Hello Guys PlZ I need ROM lollipop for Me Star 2 plus
Click to expand...
Click to collapse
You can try to build the Lollipop ROM yourself, or wait, because we always work with CM11 kitkat ROM.
please I can't send SMS cm 11 can you check it thanks
Sent from my SM-G350E using XDA-Developers mobile app
TODAY I HAVE A BEAUTIFUL AND EXCITING NEW FOR ALL SM-G350E OWNERS!!!
SM-G350E FORUMS ARE FINALLY AVAILABLE!!! YEAAH!!!!
http://forum.xda-developers.com/t/galaxy-star-2plus
Error Please Fast Reply
SO the phone is stuck on logo.
what should i do??

Unable to install ROM File on P780 4GB

Hello,
i root my p780, google play service app was not working properly so i download p780 source code and tried to copy paste system all apps then operating system crashed once turn on the mobile only logo stuck bootloader also not coming and Unable to Install Any ROM File on P780 4GB, i tried with SP Flash tool its stuck on searching i installed MTK65xx preloader also same stuck on searching, I visited lenovo service center but service men told he can't install latest update for this mobile. somebody please tell me how can i install the rom file....
vikili said:
Hello,
i root my p780, google play service app was not working properly so i download p780 source code and tried to copy paste system all apps then operating system crashed once turn on the mobile only logo stuck bootloader also not coming and Unable to Install Any ROM File on P780 4GB, i tried with SP Flash tool its stuck on searching i installed MTK65xx preloader also same stuck on searching, I visited lenovo service center but service men told he can't install latest update for this mobile. somebody please tell me how can i install the rom file....
Click to expand...
Click to collapse
What you have to do is to install the drivers and flash any other firmware. Look on my post Rooting tutorial for kitkat, in q&a section.
Pm me if you dont understand something.
Sent from my P780 using XDA-Developers mobile app
stympy said:
What you have to do is to install the drivers and flash any other firmware. Look on my post Rooting tutorial for kitkat, in q&a section.
Pm me if you dont understand something.
Sent from my P780 using XDA-Developers mobile app
Click to expand...
Click to collapse
You are not understanding my problem my phone is dead once turn on its showing only like this below image, so give proper solution.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
vikili said:
You are not understanding my problem my phone is dead once turn on its showing only like this below image, so give proper solution.
Click to expand...
Click to collapse
The proper solution is to reflash your firmware , or if you can enter to recovery is to factory reset!
See what is going on. If you cant enter in to the recovery you must reflash your original firmware.
Tell me if you need to reflash the stock firmware.
How Can i Reflash can you guide me
vikili said:
How Can i Reflash can you guide me
Click to expand...
Click to collapse
Hi.
Read this small tutorial twice.
Here are the drivers: http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605/page12
Look at the bottom of that page.
Install first the exe file, then reboot your PC. WARRNING: you must have Win.XP or Win.7 installed.
Download stock firmware from here: http://forum.xda-developers.com/lenovo-p780/development/p780-stock-rom-links-t2842399
After flash you will have firmware: ROW S124 JellyBean. If you want KitKat you must do OTA Updates or download those packs and install them from your phone by turn. OTA is my advice till S228. S2287 is the lates and last official updates.
Download SP Flash Tools from here: https://drive.google.com/folderview?id=0B_B98oK4DpK1S1l2bXRkTGxhVFk&usp=sharing
Unzip all to separare folders.
Next step is: Power down your phone.
Open device manager.
Plug the usb cable to your phone and to the PC.
In the device manager you will si first MTK65XX... device detected and after this drivers should install.
After drivers are installed disconnect the phone.
Now open spflash tool v5
Load scater file from the folder of the firmware.
In the download tab not button select firmware upgrade - nothing else.
Now press download button and plug the usb cable to your phone.
Flashing should start.
After flash one green circle with ok should appear.
After this remove the usb cable and start your phone.
If your phone is not starting you must repeat the procedure with the new preloader.
Look on your phone box and see if your phone is made after 03.2014.
If it is you must replace curent preloader with new one.
Link to new preloader: https://drive.google.com/folderview...VQ3pJeG9vTlh4Y3pMUG9ES3FtX21ZdjlwVzY3VWc#list
Use only that preloader.
Good Luck. :good:
why that Sp Flash Tool Stuck on Searching
vikili said:
why that Sp Flash Tool Stuck on Searching
Click to expand...
Click to collapse
Could be drivers or... you must reset the phone right before usb cable is inserted.

New redmi note 4 crashing

I got my redmi note 4 from geekbuying in india ..
phone crashing and hanging at random time or situation ..
i also try to install different rom but its not letting install rom device getting dead suggest me ( give Link ) of proper rom i want to use miui rom please fix or give me solution for it .. :good::good: :fingers-crossed:
i think redmi note 4 in india is only available at flipkart.and from what you are saying it seems that you are using unofficial rom. tell your exact miui version.
[email protected]!$h said:
i think redmi note 4 in india is only available at flipkart.and from what you are saying it seems that you are using unofficial rom. tell your exact miui version.
Click to expand...
Click to collapse
I got this device from Geekbuying .
Look other details in images
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
greenlight093 said:
I got this device from Geekbuying .
Look other details in images
Click to expand...
Click to collapse
That's a vendor/fake/tampered/ unofficial ROM.
You need to flash the official one.
Find the official fastboot rom here
http://en.miui.com/a-234.html
Here's how to flash: (it will user ERASE DATA so backup)
http://en.miui.com/thread-370620-1-1.html
which version i should download form that list ? can u give me name of suitable one !
I flashed/installed rom zip file using recovery method. and its giving eroor Updater process ended with ERROR 7 at last what to do ignore it ?
greenlight093 said:
I flashed/installed rom zip file using recovery method. and its giving eroor Updater process ended with ERROR 7 at last what to do ignore it ?
Click to expand...
Click to collapse
To make it clear.
The link i gave you was fastboot ROMs.
RN4 MTK (nikel):
http://update.miui.com/updates/v1/fullromdownload.php?d=nikel_global&b=F&r=global&n=
Since you're using the fake rom, its recommended to use the fastboot method through MiFlash in PC.
To replace the fake with original one.
Check the link for the procedure.
http://en.miui.com/thread-370620-1-1.html
greenlight093 said:
which version i should download form that list ? can u give me name of suitable one !
Click to expand...
Click to collapse
Your device is MBF so it has MediaTek chipset. You should download the following:
Redmi Note 4 MTK Latest Global Stable Version Fastboot File Download
And you must use Mi Flash to flash the zip files in that list (those are fastboot images).
If you want to flash via recovery, you must use this zip file, but as GabrielScott said just above, it's better to use Mi Flash.
Trying Redmi Note 4 MTK Latest Global Stable Version Fastboot File Download flashing by miflash tool and replying if i get restart problem or any app crashing error.. thank for your reply.
In tutorial images . its taken 1800sec for complete and my just finished flashing in 192s ..
after flash Redmi Note 4 MTK Latest Global Stable Version Fastboot File Download using mi-flash tool my device got crashed and and restarted 3-4 time only in starting setup selecting region time - and sim selection time keyboard selection time and more .
greenlight093 said:
after flash Redmi Note 4 MTK Latest Global Stable Version Fastboot File Download using mi-flash tool my device got crashed and and restarted 3-4 time only in starting setup selecting region time - and sim selection time keyboard selection time and more .
Click to expand...
Click to collapse
can you again post your exact miui version.
i tried too many successfully installation and almost all rom and official versions of it ..
i think its motherboard issue .... currently i using new released miui 9 version and its running without crashing just phone restarting anytime..
how do you tell if it is a fake rom?

Development Roms for Zopo Speed 7 Android 6.xx

How to Build Custom Roms for Zopo Speed 7 (Zp952) Mtk 6753 Android 6.xx
In this thread we will discuss how to create or build Custom Roms for Zopo Speed 7​
Everybody are Welcome!
MANY THANKS TO OUR MODERATORS TO OPEN AGAIN THIS THREAD !
More attention to the Xda-developers Rules:
http://forum.xda-developers.com/announcement.php?f=256
Many thanks to "SUPER ADMIN" MR. MIKE​
XDA:DevDB Information
Development Roms for Zopo Speed 7 Android 6.xx, ROM for the Zopo Speed 7 Plus
Contributors
ghost45
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Testing
Created 2017-10-15
Last Updated 2017-10-15
Custom Rom V1 Speed 7 Plus Android 6
Custom Rom V1 Speed 7 Plus Android 6
Ghost45 V1 (Android 6)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Details
-Based Android 6 Official
Build Number: 20170105-131026 (Indian Version)
-Pre root with Busybox
- Xposed
-GravityBox (must be activated after the 2" Step Attention Please …supersu must be installed first )
- New NeLauncher Zopo
- Recovery Cwm no touch By Ghost45
- New melodies added Iphone & Samsung
- Dolby Digital
-New apps xposed for change icons menu (must be activated in xposed app)
- New tricks and Several apps
- SuperSu must be installed after installed the custom rom through flashtool or after the first restart.
How Install The Custom Rom V1
1) Step
Download the new firmware.
Unzip the compressed file
Phone off without usb cable ….connected!
Run Flashtool version octa-core ….. select the file scatter,
and then check that all flags are selected
also check if in the menu in the top is selected firmware upgrade
and then push the button download (green arrow) in flashtool …… NOW ONLY CONNECT USB CABLE not before!
Wait for the end of the installation procedure of the firmware and eventually restart the phone!
This' whole simplified procedure for installing the original firmware.n progress…..
2) Step (Necessary)
This Step is to receive the right root at 100%
(in android 6 & 7 Chainfire have found one new exploit to receive right root correctly in one temporary partition .
for this moment i'm not able to save that partition and so probably in the V2 Custom rom probably will be)
1) reboot in android system after flashing process ..firmware in the step 1
2) So..copy in your exsternal SD card the file supersu xxx 2,82.zip
2) Restart the device in recovery (modded) run installing the compressed file and reboot in android system and you will find the supersu app and the right root .
Files to download :
Custom Rom Zopo Speed 7 Plus Ghost45 V1 (Android 6)
Files 3/3
1)https://1drv.ms/u/s!Ak3omcbE1qj0cPyjpvDdAD5B4eM
2)https://1drv.ms/u/s!Ak3omcbE1qj0bYyex_d5wR8cDTY
3)https://1drv.ms/u/s!Ak3omcbE1qj0ajct0OhvOuu7G4M
Supersu Vers. 2,82
​
Recovery Cwm no Touch for Zopo Speed 7 plus Android 6
Recovery Cwm no Touch for Zopo Speed 7 plus Android 6
New Cwm Recovery Android 6
New Cwm no Touch for Zopo Speed 7 Plus
Only for Android 6
How to Install
1) Unpack the zip file.
2) run flashtool for octa core devices.
3) In Flashtool select the scatter and after you will see only one flag in the program near Recovery
4) Make download in flashtool
5) Connect only now the usb to the device and to the pc
6) Wait for the flash process ..
7) restart the device with hold on the power button + volume up (+) in the same time and wait for enter in recovery mod.
​
That's a good idea. I am waiting for testing and contribute my works too ... :good: i have speed 7 .
custom recovery
I'm still trying to find a working download for a custom recovery to flash onto my zopo speed 7 plus... anyone have a link for CWM or TWRP?
gregwaldo said:
I'm still trying to find a working download for a custom recovery to flash onto my zopo speed 7 plus... anyone have a link for CWM or TWRP?
Click to expand...
Click to collapse
ok. have found a carliv recovery to flash at needrom.com. Have flashed it with SP flash tool but it doesn't survive a reboot for some reason... still figuring this out.

[ROM] Mecool k5 S905X3 Custom Rooted Rom Android 9 ATV

ROOTED STABLE ANDROID 9 ATV ROM FOR MECOOL K5 ALL VERSIONS 1.0, 1.1, 1.2
v1.0 based on official Firmware V9.20210618
download link
ANDROID 9 ATV ROOTED ROM v1.0
v2.0 based on official Firmware V9.20211126.
updated applications
updated DTV TO VERSION 2.7.8
ROOTED BY MAGISK 24.1
Replaced ro.sf.lcd_density=320 in /vendor/build.prop with 240
download link
ANDROID 9 ATV ROOTED ROM V2.0
KNOWN ISSUSES
NETFLIX AND PRIMEVIDEO 4K APPS FOR ATV NOT WORKING BUT MOBILE VERSION OF NETFLIX AND PRIMEVIDEO WITH LOWER RESOLUTION WORK
VOICE SEARCH NOT WORKING DUE TO DEFECT FROM official Firmware
LATEST OFFICIAL Firmware ( EXCLUSIVE LINK )
OFFICIAL FIRMWARE V9.20211126
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ehabfg said:
ROOTED STABLE ANDROID 9 ATV ROM FOR MECOOL K5 ALL VERSIONS 1.0, 1.1, 1.2
v1.0 based on official Firmware V9.20210618
download link
ANDROID 9 ATV ROOTED ROM v1.0
v2.0 based on official Firmware V9.20211126.
updated applications
updated DTV TO VERSION 2.7.8
ROOTED BY MAGISK 24.1
Replaced ro.sf.lcd_density=320 in /vendor/build.prop with 240
download link
ANDROID 9 ATV ROOTED ROM V2.0
KNOWN ISSUSES
NETFLIX AND PRIMEVIDEO 4K APPS FOR ATV NOT WORKING BUT MOBILE VERSION OF NETFLIX AND PRIMEVIDEO WITH LOWER RESOLUTION WORK
VOICE SEARCH NOT WORKING DUE TO DEFECT FROM official Firmware
LATEST OFFICIAL Firmware ( EXCLUSIVE LINK )
OFFICIAL FIRMWARE V9.20211126
View attachment 5559999
Click to expand...
Click to collapse
My friend, thank you. Can you change the version of VERSION 2.7.8
The reason is that it does not work well and changes the polarity from horizontal to vertical and vice versa, thus the dish signal disappears
It's possible to mount ext storage with ext4 FS for this ROM ?
Thank you for your amazing job! Can you please add Chromecast built in if you make a new version? I tried installing and converting it to system app but nothing made it work
I would like to help into upgrading this rom but at the moment I'm really busy with my studies owever I found about aidan's rom and apparently he's making a good job on other s905x3 devices, maybe his ROM could be helpfull
Hello everyone and thank you for what you do. I am inexperienced, can you show me a step by step guide to install the rom on my device? Thank you
The process to install the ROM is pretty straight forward. USB A to A cable. Amlogic USB burning tool usually also install the needed drivers. Once you have opened the program and loaded the firmware, connect the unpowered device holding the power button( to put it in bootloader mode), then once it has been recognized you can flash.
You must use the usb 2.0 not the blue one or it won't be recognized.
You can find amlogic tool download link in that video description
Hello everyone, I followed the procedure indicated but Amlogic USB Tool (v.3.1.0) does not detect the K5. I changed cable, I changed pc, but nothing. I start the program, then connect the K5 to the PC by holding down the power button (red), but nothing.
What do you think is the problem?
Hello everyone please i need help. My Mecool k5 android hybrid tv box is stuck on red light and not coming on. I don't know what to do. Have given it to a repairer and he told me it's the mother board issues
tkblak1 said:
...My Mecool k5 android hybrid tv box is stuck on red light and not coming on...
Click to expand...
Click to collapse
Use short pin method and flash FW...
Source with instructions: h**ps://4pda.to/forum/index.php?s=&showtopic=1006075&view=findpost&p=104776209
Thanks . But am not that much into this. Please who can i show the instructions that can properly get it done

Categories

Resources