Hello,
i root my p780, google play service app was not working properly so i download p780 source code and tried to copy paste system all apps then operating system crashed once turn on the mobile only logo stuck bootloader also not coming and Unable to Install Any ROM File on P780 4GB, i tried with SP Flash tool its stuck on searching i installed MTK65xx preloader also same stuck on searching, I visited lenovo service center but service men told he can't install latest update for this mobile. somebody please tell me how can i install the rom file....
vikili said:
Hello,
i root my p780, google play service app was not working properly so i download p780 source code and tried to copy paste system all apps then operating system crashed once turn on the mobile only logo stuck bootloader also not coming and Unable to Install Any ROM File on P780 4GB, i tried with SP Flash tool its stuck on searching i installed MTK65xx preloader also same stuck on searching, I visited lenovo service center but service men told he can't install latest update for this mobile. somebody please tell me how can i install the rom file....
Click to expand...
Click to collapse
What you have to do is to install the drivers and flash any other firmware. Look on my post Rooting tutorial for kitkat, in q&a section.
Pm me if you dont understand something.
Sent from my P780 using XDA-Developers mobile app
stympy said:
What you have to do is to install the drivers and flash any other firmware. Look on my post Rooting tutorial for kitkat, in q&a section.
Pm me if you dont understand something.
Sent from my P780 using XDA-Developers mobile app
Click to expand...
Click to collapse
You are not understanding my problem my phone is dead once turn on its showing only like this below image, so give proper solution.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
vikili said:
You are not understanding my problem my phone is dead once turn on its showing only like this below image, so give proper solution.
Click to expand...
Click to collapse
The proper solution is to reflash your firmware , or if you can enter to recovery is to factory reset!
See what is going on. If you cant enter in to the recovery you must reflash your original firmware.
Tell me if you need to reflash the stock firmware.
How Can i Reflash can you guide me
vikili said:
How Can i Reflash can you guide me
Click to expand...
Click to collapse
Hi.
Read this small tutorial twice.
Here are the drivers: http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605/page12
Look at the bottom of that page.
Install first the exe file, then reboot your PC. WARRNING: you must have Win.XP or Win.7 installed.
Download stock firmware from here: http://forum.xda-developers.com/lenovo-p780/development/p780-stock-rom-links-t2842399
After flash you will have firmware: ROW S124 JellyBean. If you want KitKat you must do OTA Updates or download those packs and install them from your phone by turn. OTA is my advice till S228. S2287 is the lates and last official updates.
Download SP Flash Tools from here: https://drive.google.com/folderview?id=0B_B98oK4DpK1S1l2bXRkTGxhVFk&usp=sharing
Unzip all to separare folders.
Next step is: Power down your phone.
Open device manager.
Plug the usb cable to your phone and to the PC.
In the device manager you will si first MTK65XX... device detected and after this drivers should install.
After drivers are installed disconnect the phone.
Now open spflash tool v5
Load scater file from the folder of the firmware.
In the download tab not button select firmware upgrade - nothing else.
Now press download button and plug the usb cable to your phone.
Flashing should start.
After flash one green circle with ok should appear.
After this remove the usb cable and start your phone.
If your phone is not starting you must repeat the procedure with the new preloader.
Look on your phone box and see if your phone is made after 03.2014.
If it is you must replace curent preloader with new one.
Link to new preloader: https://drive.google.com/folderview...VQ3pJeG9vTlh4Y3pMUG9ES3FtX21ZdjlwVzY3VWc#list
Use only that preloader.
Good Luck. :good:
why that Sp Flash Tool Stuck on Searching
vikili said:
why that Sp Flash Tool Stuck on Searching
Click to expand...
Click to collapse
Could be drivers or... you must reset the phone right before usb cable is inserted.
Related
Hello everyone,i have a lenovo P780 4gb.My phone is bricked,so i started to find a way to revive it,so after searching i find these thread.I follow the instructions of post 16 but flash tool shows me error S_DL_PMT_ERR_NO_SPACE(5069) on download and 8045 pmt error on firmware upgrade,during purple bar.So my p780 still remains dead.What else could i do?The battery has a code on it, like 140413
christheod92 said:
Hellow everyone,i have a lenovo P780 4gb.My phone is bricked,so i started to find a way to revive it,so after searching i find these thread.I follow the instructions of post 16 but flash tool shows me error S_DL_PMT_ERR_NO_SPACE(5069) on download and 8045 pmt error on firmware upgrade,during purple bar.So my p780 still remains dead.What else could i do?The battery has a code on it, like 140413
Click to expand...
Click to collapse
Hi. What firmware do you want to flash ?
What SP Flash tool do you use?
What windows do you use?
Do you know if your drivers are installed correctly?
stympy said:
Hi. What firmware do you want to flash ?
What SP Flash tool do you use?
What windows do you use?
Do you know if your drivers are installed correctly?
Click to expand...
Click to collapse
WINDOWS 7 PROF 64BIT
SP FLASH TOOL V3 AND V5
I have tried P780_S129_130710 ROM and several others rom,with old and new preloader.Each time flash didnt even start,until i combined P780_S129_130710 ROM with new prelooader,and start the prroblem i discribe above.I think the drivers are installed correct because the flash tool recognise my phone as mediatek preloader usb vcom(android)
The phone was given to me bricked,and i dont know what cause the problem
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/url][/IMG]
any ideas?
christheod92 said:
any ideas?
Click to expand...
Click to collapse
Hi. Try first to flash wit SP Flash Tool from q&a section/rooting tutorial for kitkat.
Those tools are modified for our phone.
I dont know what to say... If your phone was running kitkat when stopped working you must use sp flash tool v5. If not you can use v3.
Now this error appears when you have a problem with flash area. There are 2 possibilities:
1. Damaged chipset on motherboard
2. Modified firmware, too big for your flash space.
Send from my Lenovo P1 Vibe Pro
stympy said:
Hi. Try first to flash wit SP Flash Tool from q&a section/rooting tutorial for kitkat.
Those tools are modified for our phone.
I dont know what to say... If your phone was running kitkat when stopped working you must use sp flash tool v5. If not you can use v3.
Now this error appears when you have a problem with flash area. There are 2 possibilities:
1. Damaged chipset on motherboard
2. Modified firmware, too big for your flash space.
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
ok thanks,one last thing,how can i check if my motherboard is faulty?If i run memory test from sp flash tool will it show it?
christheod92 said:
ok thanks,one last thing,how can i check if my motherboard is faulty?If i run memory test from sp flash tool will it show it?
Click to expand...
Click to collapse
Yes. Try and see what is going on.
Send from my Lenovo P1 Vibe Pro
alocut said:
How do I copy 2 files from my Computer (D:\abc\file1 and D:\abc\file2) to data/nvram/APCFG/APRDEB/ (In my Device) via ADB command only ?
Click to expand...
Click to collapse
What happened to your phone?
Why do you want to copy the files, from adb?
Your phone is rooted?
Did you lost your IMEI?
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
stympy said:
What happened to your phone?
Why do you want to copy the files, from adb?
Your phone is rooted?
Did you lost your IMEI?
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
Click to expand...
Click to collapse
Yes, rooted and Lost IMEI.
My phone: Lenovo P780 ( 8GB ). Fastest way to fix IMEI error ?
alocut said:
Yes, rooted and Lost IMEI.
My phone: Lenovo P780 ( 8GB ). Fastest way to fix IMEI error ?
Click to expand...
Click to collapse
Hi.
Look here for 2 tutorials :
http://forum.xda-developers.com/lenovo-p780/help/imei-nvram-restore-tools-t3174563
With this 2 tutorials i have repaired some phones. Especialy the second tutorial.
Good Luck.
Hi, I am trying to root this phone using the guide here: bbs.elephone.hk/thread-9919-1-1.html#.WGr04lzUHIU
However in Windows 10, nothing happens when I hit the download button, and in Linux this error happens when using the files I got from the guide:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is the same PC, with Ubuntu and Windows 10 dual boot
I have tried the fastboot method, but I can't get my bootloader to unlock, the vol up button simply doesn't register on the phone.
So is there any fix? Or am missing something?
Problem solved! Windows 10 doesn't like the drivers provided. However Windows 7 does, so I advise that you keep your Windows 7 install somewhere
Follow this it will explain what you need to do. I had same issue with Windows 10 but rooted my P9000 no problem. I used FlashTools - all the info you need here:
https://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
I gave up following tutorials on elephone.hk forum & just followed tutorials from here, but whatever your personal preference - hope it helps ;0)
Need my elephone back
Not sure if this is best placed here???
So....tried to flash my Elephone P9000 using the SmartPhone Flash Tool and all the steps provided tutorial at:
https://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
Using Win10 so it took me a while to disable the driver signature enforcement option to get the drivers installed. Got that done and all..so far so good.
Download all the files as the tutorial says...clicked download and connected the phone which was powered off. Up pops a messages "PMT changed for ROM; it must be downloaded."
Google search for this and came across some pages that informed me to click on the 'Format' section in the Flash Tool
Did this and then went back into 'Download' and hey presto, the flash worked and I got the big green tick.
Lovely stuff...until I tried to power on my phone....dead in the water. Power+Volume Up does nothing, power on its own does nothing. I've downloaded loads of instances of the Flash Tool, tried the elephone stock ROM scatter file, recovery image files etc and still nothing. Read loads of similar pages where it's happened to others but just wont work for me!!!!
Can anyone help?
jfk247 said:
Not sure if this is best placed here???
So....tried to flash my Elephone P9000 using the SmartPhone Flash Tool and all the steps provided tutorial at:
https://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
Using Win10 so it took me a while to disable the driver signature enforcement option to get the drivers installed. Got that done and all..so far so good.
Download all the files as the tutorial says...clicked download and connected the phone which was powered off. Up pops a messages "PMT changed for ROM; it must be downloaded."
Google search for this and came across some pages that informed me to click on the 'Format' section in the Flash Tool
Did this and then went back into 'Download' and hey presto, the flash worked and I got the big green tick.
Lovely stuff...until I tried to power on my phone....dead in the water. Power+Volume Up does nothing, power on its own does nothing. I've downloaded loads of instances of the Flash Tool, tried the elephone stock ROM scatter file, recovery image files etc and still nothing. Read loads of similar pages where it's happened to others but just wont work for me!!!!
Can anyone help?
Click to expand...
Click to collapse
this usually happends when your flashing with old preloader... try installing CM13 with updated preloader, it should work.
Thanks Ruben, I managed to get the green tick in the sm flash tools using the 'Elephone P9000 Preloader_Lk_Boot_Recovery update' scatter text file.
Phone still wont power on at all and i can't access the sd card to copy across any ROMS so I'm back to square 1 by the looks of it. I'll keep pluggin away at it.
I tried to flash Lenovo Tab 3 730x.this device is currently in a bricked stage.messed up i guess.what i did was through sp flash tool i formatted the flash (probably including boot loader).now shows only charging signal.when connected to windows its showing mtk usb port via UsbDview.I successfully installed usb vcom driver.i have the rom file and flash tool.but SP flash tool giving an error .error msg is S_SECURITY_SLA FAIL (6004), MSP ERROE(NOT ERROR) CODE 0x00.please help.thanks in advance:crying:
Hi,
me too, exactly the same problem
I`ve got unlock bootloader, and from TWRP I stupid idiot write the system part...
Now any of version SP Flash cannot connect to my tab. I try 3 comps with diferrent ver of Win...
Ones (I dont know why) flash dones successfull...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But its not good finish for me, its the same state, right now. :crying:
Somebody of masters help as, please?
Krabat.
krabat said:
Hi,
me too, exactly the same problem
I`ve got unlock bootloader, and from TWRP I stupid idiot write the system part...
Now any of version SP Flash cannot connect to my tab. I try 3 comps with diferrent ver of Win...
Ones (I dont know why) flash dones successfull...
But its not good finish for me, its the same state, right now. :crying:
Somebody of masters help as, please?
Krabat.
Click to expand...
Click to collapse
Hey can you give me the link of rom file, sp flash tool and driver ? May be I can give it a try
Hi,
i finally unbrick my tablet!!! after 3 days and night, i dont beleve allready, its posible...
drivers: IMHO it does not matter witch version of drivers you use...
tool: i used SP_Flash_Tool_v5.1552.00_SecureBoot. if flash tool doesn`t start with missing MSVCR100.dll, try use another comp (my notebook Win7x64 = 6004 error, PC Win7x86 = red line to 100% > 2004 or 2005 error). Must use MKT_AllinOne_DA.bin and auth_sv5.auth, tablet without battery, no any vol+/- button hold, just start download in serurity mode and plug microusb to tablet.
stock: TB3-730X_S038_170627_ROW. i tried TB3-730X_S033_160707_ROW, TB3-730X_S037_161228_ROW but TB3-730X_S038_170627_ROW roms flash finish successfull.
links:
rom, stock, drivers: https://cloud.mail.ru/public/4bXW/WHjeWWTPG
Happy Krabat.
krabat said:
Hi,
i finally unbrick my tablet!!! after 3 days and night, i dont beleve allready, its posible...
drivers: IMHO it does not matter witch version of drivers you use...
tool: i used SP_Flash_Tool_v5.1552.00_SecureBoot. if flash tool doesn`t start with missing MSVCR100.dll, try use another comp (my notebook Win7x64 = 6004 error, PC Win7x86 = red line to 100% > 2004 or 2005 error). Must use MKT_AllinOne_DA.bin and auth_sv5.auth, tablet without battery, no any vol+/- button hold, just start download in serurity mode and plug microusb to tablet.
stock: TB3-730X_S038_170627_ROW. i tried TB3-730X_S033_160707_ROW, TB3-730X_S037_161228_ROW but TB3-730X_S038_170627_ROW roms flash finish successfull.
links:
rom, stock, drivers: https://cloud.mail.ru/public/4bXW/WHjeWWTPG
Happy Krabat.
Click to expand...
Click to collapse
what is IMHO drivers? still in bricked state..please help
tomas11111 said:
what is IMHO drivers? still in bricked state..please help
Click to expand...
Click to collapse
How can I use auth.5 file with this sp tool version? There is no option for selecting the auth file. Please help
How can I enable security mode of sp flash tool
tomas11111 said:
what is IMHO drivers? still in bricked state..please help
Click to expand...
Click to collapse
Hi,
I`m so sorry for my late answear.
Do You still in hell with your Lenovo?
Krabat.
krabat said:
Hi,
i finally unbrick my tablet!!! after 3 days and night, i dont beleve allready, its posible...
drivers: IMHO it does not matter witch version of drivers you use...
tool: i used SP_Flash_Tool_v5.1552.00_SecureBoot. if flash tool doesn`t start with missing MSVCR100.dll, try use another comp (my notebook Win7x64 = 6004 error, PC Win7x86 = red line to 100% > 2004 or 2005 error). Must use MKT_AllinOne_DA.bin and auth_sv5.auth, tablet without battery, no any vol+/- button hold, just start download in serurity mode and plug microusb to tablet.
stock: TB3-730X_S038_170627_ROW. i tried TB3-730X_S033_160707_ROW, TB3-730X_S037_161228_ROW but TB3-730X_S038_170627_ROW roms flash finish successfull.
links:
rom, stock, drivers: https://cloud.mail.ru/public/4bXW/WHjeWWTPG
Happy Krabat.
Click to expand...
Click to collapse
Hi,
I think I have the same Problem and the link is broken, can you provide me the files? Thank you
Julian
From: How to Unbrick Tab A7 Lite using SP Flash Tool.
CustomAP 2022
The only way to get away from the official firmware. Changes Degoogle (LeOS-TD.2.0 ) A13 GSI Home Launcher For SM-T225 FastbootD ☆☆☆ Tips and Tricks For [ LOS TD Unofficial GSI ] latest 2023-03-24 microG...
forum.xda-developers.com
All process are ...
STEP 1: Download the SP Flash Tool & MTK meta Utility
STEP 2: Download Stock Firmware
STEP 3: Extract Stock Firmware by MTK META Utility
STEP 4: Install MediaTek USB Drivers
STEP 5: Establish Link between Tab A7 Lite and SP Flash Tool
STEP 6: Flash Stock Firmware and Unbrick Device via SP Flash Tool
≥≥≥≥≥≥≥≥≥≥≥≥
Let begin..Step 3 ( if you are in a hurry.) --except step 4,5
SP Flash tool : SP_Flash_Tool_v5.2052_Windows.zip https://androidfilehost.com/?fid=17248734326145726480
MTK META Utility V44 https://mega.nz/file/8HJGXJKD#uvapZWuTits6LkzsW0ZRpmn1RZqbVu34TwCnunxoi2wNew V52 https://romadd.com/mtk-meta-utility-tool-free/
SCATTER FILE FROM A11, A12 Samsung Stock Firmware : make yourself with tools mtk meta util
Howto
1.Download and extract firmware into folder.
2.Open MTK META UTIL
Select right tab "Android ---> Extract Samsung ROM (MTK)
Then select your extracted firmware (folder)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's creates FIRMWARE_UNPACKED folder. Within all firmware files for SP Flash tool
3. Open SP Flash tool (....import scatter file.)
Connect your tab with Computer. Windows Device Manager will recognize Samsung Tab A7 Lite. If not ...try this
# power Off then connect it to PC via USB cable and hit the Volum down once.
# power Off then connect USB cable with PC one end , press & hold Vol Up + Vol down , then connect one end USB with Tab
Or install this windows Driver.
MediaTek_USB_Drivers.exe | by Droidwin for Misc. Software & Hardware Resources
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
IF YOU CAN'T MAKE THIS CONNECTION, U HAD BROKEN TAB MAINBOARD ALREADY. SORRY FOR THAT.
____You can stop now.
- Navigate to the extracted firmware folder which processed by MTK Util
(Firmware_Unpacked) and there should be a scatter text file, something
along the lines of MTxxxx>Android>scatter.txt. Select that file and click Open.
-Doing so will automatically load the required files to their respective partitions.
in the SP Flash Tool.
- Untick the preloader section of the tool as we don’t have to flash that partition.
(Try this first )
- Once done, click on the Download button situated at the top menu bar and
wait for the process to complete.
- As soon as the flashing is complete, you should get the Download OK message.
. You may now remove your device from the PC and turn it on via the Power key (if that doesn’t happen automatically).
Its will flash all extracted files of firmware like Odin
Meet you tab alive again.
Thank you for help , I try later
but , I need fix verified boot enable
again
Difficul said:
View attachment 5701107
again
Click to expand...
Click to collapse
Don't used preloader, tick off
tom.android said:
Don't used preloader, tick off
Click to expand...
Click to collapse
same
tom.android said:
Click to expand...
Click to collapse
i looked and it's not the solution
Today , i connect Tab with computer and
How to fix this ?
mine is still in repair shop he still hasnt fixed it yet it will come in some days if its not fixed i will try this method
actually there is a tool for disabling verification
just use mtk meta utility
so click disable auth bypass and connect then it will stop connecting and disconnecting
Hope it healthy.
zenitsu man said:
View attachment 5707121
so click disable auth bypass and connect then it will stop connecting and disconnecting
Click to expand...
Click to collapse
Ok I use this before use Sp tool every time
and still get the error
prince2047 said:
View attachment 5785071
Click to expand...
Click to collapse
You need to use unlock tool : crask version of buy it
How bricked , tell what u people did to brick to avoid using this guide in the future
ozmage said:
How bricked , tell what u people did to brick to avoid using this guide in the future
Click to expand...
Click to collapse
Never flash an incompatible operating system or upgrade without a BL (bootloader) like samsung
Difficul said:
Never flash an incompatible operating system or upgrade without a BL (bootloader) like samsung
Click to expand...
Click to collapse
did you fixed your device ?
Can anyone help me????? my phone is bricked and i have to flash with firmware........... I tried all process in the google but i could flash the phone....
sadatkabir50 said:
Can anyone help me????? my phone is bricked and i have to flash with firmware........... I tried all process in the google but i could flash the phone....
Click to expand...
Click to collapse
I just seen on oxygen updater app on google play has that stock firmware. if I'm not mistaken... just doubled checked no usa version tho
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sadatkabir50 said:
Can anyone help me????? my phone is bricked and i have to flash with firmware........... I tried all process in the google but i could flash the phone....
Click to expand...
Click to collapse
maybe i can download that firmware for you an foward a download link.
but def looks like.... we can get something going for you!!! NO PROMISES THO HAHA
halloweenm925 said:
maybe i can download that firmware for you an foward a download link.
but def looks like.... we can get something going for you!!! NO PROMISES THO HAHA
Click to expand...
Click to collapse
bro...my device is running but i got no internet wifi,sim data isnot working.....how to flash this if u send me this....
can u give the boot.img file or full rom ?
I'm having the very same problem right now. I tried to root the device and everything worked well so far, but neither Wifi nor Bluetooth is getting activated. Changing to the other boot slot ended up in a boot loop back to fastboot.
@sadatkabir50 Where did you get the stock rom from or what was your approach to root the device?
hamamama said:
I'm having the very same problem right now. I tried to root the device and everything worked well so far, but neither Wifi nor Bluetooth is getting activated. Changing to the other boot slot ended up in a boot loop back to fastboot.
@sadatkabir50 Where did you get the stock rom from or what was your approach to root the device?
Click to expand...
Click to collapse
Same problem. Everything working fine just Wi-Fi,camera,Bluetooth not working.
Which method did you use to root your device?
I'm following @halloweenm925's advice and downloaded the firmware for the EU version of the CPH2465 with a second device. How would you move forward if you had this file?
this boot img can boot ur phone but wifi and everything not working..
So I got the stock rom but neither the Wifi nor the Bluetooth is coming up. I'm kind of desperate right now. Can anybody support?
hamamama said:
So I got the stock rom but neither the Wifi nor the Bluetooth is coming up. I'm kind of desperate right now. Can anybody support?
Click to expand...
Click to collapse
inbox me bro.. just now i fixed the problem
Solved the problem. Here is how I did it.
1) On a second Android phone, download the Oxygen Updater App
2) Open the app, set it to advanced settings, chose the device with the semi-bricked status, download the full zip
3) the zip file will be downloaded to sdcard's user root => transfer the zip file to your semi-bricked device
4) on your semi-bricked device, go to settings>updates, click on the top right three-point-menue and chose "local installation"
5) select the zip file and do the update
After the unpacking and verification is finished, reboot the phone and things should be back to normal.
If you want, you can now give the rooting a second try. There are a lot of tutorials, I used this one since I had the stock full rom:
Root OnePlus Nord CE 5G using Magisk [No TWRP Required]
Do you own a OnePlus Nord CE 5G android smartphone? If yes, today, we will share with you how you can Root OnePlus Nord CE 5G with the help of the Magisk
magiskapp.com
The full stock rom which is downloaded as described above needs to be extracted with the help of a script: as described here:
[LINUX][GUIDE] ROM Payload Image Dump
Now we have dumpers for Win/Mac/Linux! Great!
forum.xda-developers.com
So the steps to root the device would be
1) download the full rom as described above
2) extract the boot.img with the help of aforementioned python script
3) follow the steps as described in the tutorial linked above
I think what caused the initial issue on my side was that I simply was not on the same OS version on the device as the boot.img which I extracted from the full zip which is totally my own fault because almost every tutorial mentions it explicitly that you have to have the latest update on your to-be-rooted device AND make sure that you have the same ROM available to root your device.
Questions welcome!