From: How to Unbrick Tab A7 Lite using SP Flash Tool.
CustomAP 2022
The only way to get away from the official firmware. Changes Degoogle (LeOS-TD.2.0 ) A13 GSI Home Launcher For SM-T225 FastbootD ☆☆☆ Tips and Tricks For [ LOS TD Unofficial GSI ] latest 2023-03-24 microG...
forum.xda-developers.com
All process are ...
STEP 1: Download the SP Flash Tool & MTK meta Utility
STEP 2: Download Stock Firmware
STEP 3: Extract Stock Firmware by MTK META Utility
STEP 4: Install MediaTek USB Drivers
STEP 5: Establish Link between Tab A7 Lite and SP Flash Tool
STEP 6: Flash Stock Firmware and Unbrick Device via SP Flash Tool
≥≥≥≥≥≥≥≥≥≥≥≥
Let begin..Step 3 ( if you are in a hurry.) --except step 4,5
SP Flash tool : SP_Flash_Tool_v5.2052_Windows.zip https://androidfilehost.com/?fid=17248734326145726480
MTK META Utility V44 https://mega.nz/file/8HJGXJKD#uvapZWuTits6LkzsW0ZRpmn1RZqbVu34TwCnunxoi2wNew V52 https://romadd.com/mtk-meta-utility-tool-free/
SCATTER FILE FROM A11, A12 Samsung Stock Firmware : make yourself with tools mtk meta util
Howto
1.Download and extract firmware into folder.
2.Open MTK META UTIL
Select right tab "Android ---> Extract Samsung ROM (MTK)
Then select your extracted firmware (folder)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's creates FIRMWARE_UNPACKED folder. Within all firmware files for SP Flash tool
3. Open SP Flash tool (....import scatter file.)
Connect your tab with Computer. Windows Device Manager will recognize Samsung Tab A7 Lite. If not ...try this
# power Off then connect it to PC via USB cable and hit the Volum down once.
# power Off then connect USB cable with PC one end , press & hold Vol Up + Vol down , then connect one end USB with Tab
Or install this windows Driver.
MediaTek_USB_Drivers.exe | by Droidwin for Misc. Software & Hardware Resources
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
IF YOU CAN'T MAKE THIS CONNECTION, U HAD BROKEN TAB MAINBOARD ALREADY. SORRY FOR THAT.
____You can stop now.
- Navigate to the extracted firmware folder which processed by MTK Util
(Firmware_Unpacked) and there should be a scatter text file, something
along the lines of MTxxxx>Android>scatter.txt. Select that file and click Open.
-Doing so will automatically load the required files to their respective partitions.
in the SP Flash Tool.
- Untick the preloader section of the tool as we don’t have to flash that partition.
(Try this first )
- Once done, click on the Download button situated at the top menu bar and
wait for the process to complete.
- As soon as the flashing is complete, you should get the Download OK message.
. You may now remove your device from the PC and turn it on via the Power key (if that doesn’t happen automatically).
Its will flash all extracted files of firmware like Odin
Meet you tab alive again.
Thank you for help , I try later
but , I need fix verified boot enable
again
Difficul said:
View attachment 5701107
again
Click to expand...
Click to collapse
Don't used preloader, tick off
tom.android said:
Don't used preloader, tick off
Click to expand...
Click to collapse
same
tom.android said:
Click to expand...
Click to collapse
i looked and it's not the solution
Today , i connect Tab with computer and
How to fix this ?
mine is still in repair shop he still hasnt fixed it yet it will come in some days if its not fixed i will try this method
actually there is a tool for disabling verification
just use mtk meta utility
so click disable auth bypass and connect then it will stop connecting and disconnecting
Hope it healthy.
zenitsu man said:
View attachment 5707121
so click disable auth bypass and connect then it will stop connecting and disconnecting
Click to expand...
Click to collapse
Ok I use this before use Sp tool every time
and still get the error
prince2047 said:
View attachment 5785071
Click to expand...
Click to collapse
You need to use unlock tool : crask version of buy it
How bricked , tell what u people did to brick to avoid using this guide in the future
ozmage said:
How bricked , tell what u people did to brick to avoid using this guide in the future
Click to expand...
Click to collapse
Never flash an incompatible operating system or upgrade without a BL (bootloader) like samsung
Difficul said:
Never flash an incompatible operating system or upgrade without a BL (bootloader) like samsung
Click to expand...
Click to collapse
did you fixed your device ?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I would keep it short. Don't ask questions. This device dump is straight away coming from the device. So if you want to get started with something, here is the boot, system and recovery images. If you need anything else, let me know below in the comments. Please do not ask for review videos, benchmark tests, camera quality, blah, blah. You have the YU forum to ask such questions. Thank you and enjoy.
Download: here
reserved
good to see a dev like u here,its enough for expecting support for Yureka:good:
That was so quick mate thanks for sharing it
will look forward for more development
Can someone please upload the build.prop only?
CosmoDroid said:
Can someone please upload the build.prop only?
Click to expand...
Click to collapse
here
https://github.com/YUPlayGod/android_device_yu_tomato/blob/cm-11.0/system.prop
good work
Can anyone pls tell me how to flash this file??? And my phone is rooted and in cwm recovery.... But i want stock recovery to flash the update?? So plsss
Need to flash
Ashok sha said:
Can anyone pls tell me how to flash this file??? And my phone is rooted and in cwm recovery.... But i want stock recovery to flash the update?? So plsss
Click to expand...
Click to collapse
the recovery stock is inside the zip http://forum.xda-developers.com/yureka/development/tool-one-tool-t3006128
androidgalaxyman said:
the recovery stock is inside the zip http://forum.xda-developers.com/yureka/development/tool-one-tool-t3006128
Click to expand...
Click to collapse
Bro i downloaded the zip...now pls tell me how to flash this??
Steps
Ashok sha said:
Bro i downloaded the zip...now pls tell me how to flash this??
Click to expand...
Click to collapse
1. Enable android debugging mode in the mobile device.
2. using the usb cabel to connect and download & install PDA Net drivers.
3. Extract the package and go inside folder called "TREASU* like that.
4. click open the command line windows.
5. Type adb devise , it will show the list of devices connected. This is actually cross checking your devices properly connected with debugger.
6. Moreover go to the mobile setting, -> security -> tick unknown sources.
7. in the same command line go back upward one directory, you can find all*****.bat file, run it.
8. it will give the steps.
9. First do unlock the boot loader.
10. restart the mobile , then again install the customer recovery.
11. Then again using this tool to root.:laugh:
Tool is straightforward to use.
androidgalaxyman said:
1. Enable android debugging mode in the mobile device.
2. using the usb cabel to connect and download & install PDA Net drivers.
3. Extract the package and go inside folder called "TREASU* like that.
4. click open the command line windows.
5. Type adb devise , it will show the list of devices connected. This is actually cross checking your devices properly connected with debugger.
6. Moreover go to the mobile setting, -> security -> tick unknown sources.
7. in the same command line go back upward one directory, you can find all*****.bat file, run it.
8. it will give the steps.
9. First do unlock the boot loader.
10. restart the mobile , then again install the customer recovery.
11. Then again using this tool to root.:laugh:
Tool is straightforward to use.
Click to expand...
Click to collapse
Bro shall i use flashify app to install this recovery.img
Why u want to do that
Ashok sha said:
Bro shall i use flashify app to install this recovery.img
Click to expand...
Click to collapse
Hi Mate, whats the show stopper to this procedure to do with that tool. its good to use that.
I wanted to go back to the Stock CM11S but couldn't download the flashable zip from the Cyngn support page. Can anyone instruct how to use this dump to revert back to CM11S?
Download from Yu Forum and also follow easy steps mentioned there. Here is link
http://forums.yuplaygod.com/threads/factory-images-and-flashing-tools-official.2178/
Bricked Qualcomm 9008 mode
vishal_android freak said:
I would keep it short. Don't ask questions. This device dump is straight away coming from the device. So if you want to get started with something, here is the boot, system and recovery images. If you need anything else, let me know below in the comments. Please do not ask for review videos, benchmark tests, camera quality, blah, blah. You have the YU forum to ask such questions. Thank you and enjoy.
Download: here
Click to expand...
Click to collapse
Hi there, could you please provide me the complete eMMC dump of our Yu, off course except all partitions that could be found inside CM11 stock fastboot update zip (except these partitions: NON-HLOS/modem, boot, recovery, system, userdata, aboot, hyp, rpm, sbl1, tz).
I really need those files to recover my Yu. I'm leaving in Indonesia, so I can't get it replaced.
Hello,
i root my p780, google play service app was not working properly so i download p780 source code and tried to copy paste system all apps then operating system crashed once turn on the mobile only logo stuck bootloader also not coming and Unable to Install Any ROM File on P780 4GB, i tried with SP Flash tool its stuck on searching i installed MTK65xx preloader also same stuck on searching, I visited lenovo service center but service men told he can't install latest update for this mobile. somebody please tell me how can i install the rom file....
vikili said:
Hello,
i root my p780, google play service app was not working properly so i download p780 source code and tried to copy paste system all apps then operating system crashed once turn on the mobile only logo stuck bootloader also not coming and Unable to Install Any ROM File on P780 4GB, i tried with SP Flash tool its stuck on searching i installed MTK65xx preloader also same stuck on searching, I visited lenovo service center but service men told he can't install latest update for this mobile. somebody please tell me how can i install the rom file....
Click to expand...
Click to collapse
What you have to do is to install the drivers and flash any other firmware. Look on my post Rooting tutorial for kitkat, in q&a section.
Pm me if you dont understand something.
Sent from my P780 using XDA-Developers mobile app
stympy said:
What you have to do is to install the drivers and flash any other firmware. Look on my post Rooting tutorial for kitkat, in q&a section.
Pm me if you dont understand something.
Sent from my P780 using XDA-Developers mobile app
Click to expand...
Click to collapse
You are not understanding my problem my phone is dead once turn on its showing only like this below image, so give proper solution.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
vikili said:
You are not understanding my problem my phone is dead once turn on its showing only like this below image, so give proper solution.
Click to expand...
Click to collapse
The proper solution is to reflash your firmware , or if you can enter to recovery is to factory reset!
See what is going on. If you cant enter in to the recovery you must reflash your original firmware.
Tell me if you need to reflash the stock firmware.
How Can i Reflash can you guide me
vikili said:
How Can i Reflash can you guide me
Click to expand...
Click to collapse
Hi.
Read this small tutorial twice.
Here are the drivers: http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605/page12
Look at the bottom of that page.
Install first the exe file, then reboot your PC. WARRNING: you must have Win.XP or Win.7 installed.
Download stock firmware from here: http://forum.xda-developers.com/lenovo-p780/development/p780-stock-rom-links-t2842399
After flash you will have firmware: ROW S124 JellyBean. If you want KitKat you must do OTA Updates or download those packs and install them from your phone by turn. OTA is my advice till S228. S2287 is the lates and last official updates.
Download SP Flash Tools from here: https://drive.google.com/folderview?id=0B_B98oK4DpK1S1l2bXRkTGxhVFk&usp=sharing
Unzip all to separare folders.
Next step is: Power down your phone.
Open device manager.
Plug the usb cable to your phone and to the PC.
In the device manager you will si first MTK65XX... device detected and after this drivers should install.
After drivers are installed disconnect the phone.
Now open spflash tool v5
Load scater file from the folder of the firmware.
In the download tab not button select firmware upgrade - nothing else.
Now press download button and plug the usb cable to your phone.
Flashing should start.
After flash one green circle with ok should appear.
After this remove the usb cable and start your phone.
If your phone is not starting you must repeat the procedure with the new preloader.
Look on your phone box and see if your phone is made after 03.2014.
If it is you must replace curent preloader with new one.
Link to new preloader: https://drive.google.com/folderview...VQ3pJeG9vTlh4Y3pMUG9ES3FtX21ZdjlwVzY3VWc#list
Use only that preloader.
Good Luck. :good:
why that Sp Flash Tool Stuck on Searching
vikili said:
why that Sp Flash Tool Stuck on Searching
Click to expand...
Click to collapse
Could be drivers or... you must reset the phone right before usb cable is inserted.
Hi Guys!
Today I show you how you can UNBRICK your Xiaomi TV box
This manual from 4pda by sashlav
Download & Install AmLogic USB Burning tool
Download & Extract Firmware Image
Run AmLogic USB Burning tool as Administrator and set English language
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Import image file of software
Wait for the end of the verification the software image
Open your box
Connect TV box to your PC (use USB Male-Male cable)
Close the contacts as shown in the photo and apply power to the box
The system should recognize the new device as the "WorldCup Device"
The AmLogic USB Burning tool will display "Connect success"
In the menu "Configuration" note "Erase flash" and select "Erase all" in the drop-down menu.
Be sure to remove the checkbox with "Erase bootloader"! It should look like this:
Press "Start" button
If successful, the program will write "100%: Burning successfully"
Turn off the box, assemble, and connect to your TV
Note:
If you see this message:
Unplug and reconnect USB, the firmware update should continue
Click to expand...
Click to collapse
it' is beta firmware
please give me firmware stock link?
Thank you!
phanxuanminh said:
it' is beta firmware
please give me firmware stock link?
Thank you!
Click to expand...
Click to collapse
we don't have another firmware in img format.
Great guide! Could you please guide us how to load image from a box?
Sent from my iPhone using Tapatalk
Bircked My MDZ-18-AA
Dear Fried,
I have bricked my MI Box 3 pro while using parted app to transfer game from system image to OTG.
I hope this kinda of method would be successful to recovery my dead Box.
Can you help me to find the test points and flash the Kungfupanda rom to bring back my device.
I would be debted to you friend.
www---.cnx-software.com/2016/04/11/xiaomi-mi-box-3-enhanced-unboxing-and-teardown--
https://forum.xda-developers.com/android-stick--console-computers/allwinner/xiaomi-mi-tv-box-3-enhanced-t3357728/page6#post70483527
Krishna Nemani
Can I use the same method on MDZ-19-AA?
i have to know als well
bzz11g said:
we don't have another firmware in img format.
Click to expand...
Click to collapse
u can downgrade ..
---------- Post added at 02:07 PM ---------- Previous post was at 01:58 PM ----------
hello. thanks for this guide - works fine
Another sequence is at my box
1. Close the contacts as shown in the photo and apply power to the box --- and hold ---
2. apply power to the box
3. Connect TV box to your PC (use USB Male-Male cable)
How do I make my computer recognize my box as a disk drive and not as a usb mtp devic
How do I make my computer recognize my box as a disk drive and not as a usb mtp device?
Has anyone used this guide to revert back to Marshmallow after flashing Nougat Beta FW?
fail unbrick MDZ-19-AA
dimdim87 said:
i have to know als well
Click to expand...
Click to collapse
My Box start and stop on Grey screen after try to chang ROM
I´m try to UNBRICK my Xiaomi TV box and The method fail on my MDZ-19-AA
1% stop - ""ROMCODE/INITIALIZA DDR BUFFER/READ ITEM DATA FALIED""
How can i fix this???
Holy Mother God !!! it Worked ....thank you very much!!!
Do you have mibox 3s MDZ-19-AA firmware image,My mibox is brick too,but it is mibox 3s.
MDZ-19-AA bricked!
Hi,
I followed the instructions but unfortunately dont seem to work with the model MDZ-19-AA. I guess is due to the img file which is only for MDZ-16 model.
by any change someone could tell me how to proceed to save my bricked box 3s? I dont find a full firmware for it.
any other way to restore the any system on it?
many thanks !
jacortijo said:
Hi,
I followed the instructions but unfortunately dont seem to work with the model MDZ-19-AA. I guess is due to the img file which is only for MDZ-16 model.
by any change someone could tell me how to proceed to save my bricked box 3s? I dont find a full firmware for it.
any other way to restore the any system on it?
many thanks !
Click to expand...
Click to collapse
Search xiaomi eu - mdz 19 aa
I did search there and google during several hours without luck, all the instructions are always for 16-ZZ.
I also found a link to the firmware full for 19-AA but I dont manage to register properly in yandex service.
http://en.miui.com/thread-323779-1-1.html
I also tried to flash the images published here but the USB burning tool is not able to load them.
https://androidfilehost.com/?w=files&flid=140483
do you have any other img I could use for 19-AA
I really dont know what else to do... :/
Google Search : huong dan flash global rom cho mibox 3s mdz 19 aa
preuss65 said:
Google Search : huong dan flash global rom cho mibox 3s mdz 19 aa
Click to expand...
Click to collapse
I did the search but still no luck, I found a full image for 19-AA
http://miui.vn/forum/threads/huong-dan-nang-cap-ha-cap-firmware-mi-box-tong-hop-stock-firmware-cho-mi-box-offline-update.37845/#post-478579
and some other several img files from Long Çhïvaš, he is wellknow for dealing with xiaomi boxes... but no luck either.
https://androidfilehost.com/?fid=385035244224407797
but when I try to load them in the USB burning tool, the tools doesnt accept it. Many of the "full images" I find in Internet are not a img file. They are an update.zip file... and the tool only support img files.
I am out of luck...
jacortijo said:
I did the search but still no luck, I found a full image for 19-AA
http://miui.vn/forum/threads/huong-dan-nang-cap-ha-cap-firmware-mi-box-tong-hop-stock-firmware-cho-mi-box-offline-update.37845/#post-478579
and some other several img files from Long Çhïvaš, he is wellknow for dealing with xiaomi boxes... but no luck either.
https://androidfilehost.com/?fid=385035244224407797
but when I try to load them in the USB burning tool, the tools doesnt accept it. Many of the "full images" I find in Internet are not a img file. They are an update.zip file... and the tool only support img files.
I am out of luck...
Click to expand...
Click to collapse
Xiaomi created update.zip files can be flashed from standard recovery menu. Copy file to usb thumb drive.
when turning on mibox
hold home and menu together til you enter recover menu
This is the Xiaomi Mi 9's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Is it possible to unlock the bootloader immediately with that tool or does it use the Xiaomi unlock process (second case probably, right )
TobiPeter said:
Is it possible to unlock the bootloader immediately with that tool or does it use the Xiaomi unlock process (second case probably, right )
Click to expand...
Click to collapse
You can't unlock the bootloader directly with this tool
Many thanks for this great tool ?????
5€ Donation is send out
Thanks for supporting MI9 :good: :good: :good: :good:
mauronofrio said:
This is the Xiaomi Mi 9's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Click to expand...
Click to collapse
mauronofrio said:
You can't unlock the bootloader directly with this tool
Click to expand...
Click to collapse
@mauronofrio sorry if ask you but i need help i'm new with xiaomi phone and tool flash tool and all the rest , so if i flash a rom with this tool all in one using global flash rom and save my data will be a problem?? i have global rom mi9 with your twrp and magisik installed with root, please let me know tanks
Thanks for share
my hard disk was dead...and lost some driver and tool
ALl in One, let me save a lot of time
Hi, I would like to update to the latest xiaomi.eu (android q), I currently installed the TWRP (LR team 3.3.0-0523), I would go to Mauro's .41 ... I would not run into bootloop and brick problems (reading there are several cases) .. using this tool, can I feel comfortable? or is it better to proceed via fastboot? grazie mille
I would like to know, how to use this tool to flash device. Should I boot the device in fastboot mode, then connect the tool to flash it?
Gnahznuy said:
I would like to know, how to use this tool to flash device. Should I boot the device in fastboot mode, then connect the tool to flash it?
Click to expand...
Click to collapse
You can connect the device powered on on in fastboot mode, the important thing is that debug usb is enabled. The tool will eventually tell you that the mode is not good for what you want to do
mauronofrio said:
You can connect the device powered on on in fastboot mode, the important thing is that debug usb is enabled. The tool will eventually tell you that the mode is not good for what you want to do
Click to expand...
Click to collapse
I did everything and connected to the tool looks everything is fine, after it I flash factory images, the pop out other screen to input the ROM, then click flash ROM then nothing happen. No respond at all..
I am planning to flash TWRP on my Mi 8 but I get a warning message saying if I don't root afterwards, my device will be bricked. Is this holding true? I want to keep my stock ROM and no root.
This tool is stale and not working anymore.
This will probably work in any region but test in Australia
**** Please download everything from the links provided as the versions ****
**** of the same tool might not work from somewhere else ****
*** I'm not responsible if you mess up ***
Easy way to get new UI 2.0 Android 11
-------------------------------------------------------------------------------
Step 0
1. Have Official Firmware from the link below - no root
2. Locked Bootloader
3. Open the phone app and dial *#391#
4. Select Region Australia Vodaphone, Telestra, and Optus
if the provider not showing they might be using one of the above networks. Google IT!
*** The Phone will reboot and the new update will show, just update ***
Done
Manual way to get new UI 2.0 Android 11
-------------------------------------------------------------------------------
Step 1
**** What you need to download ****
1. Download Firmware
Firmware - RMX2111PU_11_A.33
2. Winrar / 7zip - To unpack the firmware to multiple files
Winrar / 7zip
3. MTK META Utility V50 - To bypass auth and enter flashing mode
MTK META Utility V50
4. SP_Flash_Tool_v5.2216_Win - To flash firmware to the device
SP Flash Tool
5. MTK Drivers - Very specific so download provided drivers
MTK Drivers
7. mct ofp extractor
MCT OFP Extractor
6. Realme 7 5G Device + Genuine Cable
-------------------------------------------------------------------------------
Step 2
1. Install Drivers and Extract Downloads
2. Turn off your phone
2.5 Open MCT OFP Extractor and extract firmware from (.ofp file)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Open MTK META Utility V50 and click Disable auth
4. On your phone press Volume UP + Volume Down and connect USB cable
*** You will hear something connect to your computer but nothing on the screen as see stuff on the program ***
Waiting for mtk usb device... ok
BootMode : BootRom[COM3]
DriverDesc : MediaTek USB Port
DriverPath : usb\vid_0e8d&pid_0003\6&363b4ca8&0&8
DriverSRV : wdm_usb
DriverVersion : 3.0.1504.0
DriverDate : 1-22-2015
DriverCFG : oem34.inf
DriverOEM : MediaTek Inc.
Connecting to BootROM......
● Chipset MT6853
● SecCFG SBC+SDA
Disable BRom protection...
MTK Auth Disable(SLA/DAA) success!
Click to expand...
Click to collapse
5. Open SP Flash Tool, you may see errors just press ok till the program opens
6. Select the Scatter file from the extracted firmware
7. select the authentication file from the extracted firmware
8. Click Option>Option and the settings should look something like this
9. Mak Sure this looks like this on "download only" mode
10. Click download, you may get few error just click ok and re-press download till the process
start as its old software sometimes its buggy
11. Once the process is complete reboot phone by press & hold Power Button + Volume Up
Now you can do Step 0 and should be able to Update to UI 2.0
Reserved
reserved 2
This actually helped me a huge deal mate, took a few too many liberties when trying to get into Fastboot on this device! Cheers!!!