Hi Guys!
Today I show you how you can UNBRICK your Xiaomi TV box
This manual from 4pda by sashlav
Download & Install AmLogic USB Burning tool
Download & Extract Firmware Image
Run AmLogic USB Burning tool as Administrator and set English language
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Import image file of software
Wait for the end of the verification the software image
Open your box
Connect TV box to your PC (use USB Male-Male cable)
Close the contacts as shown in the photo and apply power to the box
The system should recognize the new device as the "WorldCup Device"
The AmLogic USB Burning tool will display "Connect success"
In the menu "Configuration" note "Erase flash" and select "Erase all" in the drop-down menu.
Be sure to remove the checkbox with "Erase bootloader"! It should look like this:
Press "Start" button
If successful, the program will write "100%: Burning successfully"
Turn off the box, assemble, and connect to your TV
Note:
If you see this message:
Unplug and reconnect USB, the firmware update should continue
Click to expand...
Click to collapse
it' is beta firmware
please give me firmware stock link?
Thank you!
phanxuanminh said:
it' is beta firmware
please give me firmware stock link?
Thank you!
Click to expand...
Click to collapse
we don't have another firmware in img format.
Great guide! Could you please guide us how to load image from a box?
Sent from my iPhone using Tapatalk
Bircked My MDZ-18-AA
Dear Fried,
I have bricked my MI Box 3 pro while using parted app to transfer game from system image to OTG.
I hope this kinda of method would be successful to recovery my dead Box.
Can you help me to find the test points and flash the Kungfupanda rom to bring back my device.
I would be debted to you friend.
www---.cnx-software.com/2016/04/11/xiaomi-mi-box-3-enhanced-unboxing-and-teardown--
https://forum.xda-developers.com/android-stick--console-computers/allwinner/xiaomi-mi-tv-box-3-enhanced-t3357728/page6#post70483527
Krishna Nemani
Can I use the same method on MDZ-19-AA?
i have to know als well
bzz11g said:
we don't have another firmware in img format.
Click to expand...
Click to collapse
u can downgrade ..
---------- Post added at 02:07 PM ---------- Previous post was at 01:58 PM ----------
hello. thanks for this guide - works fine
Another sequence is at my box
1. Close the contacts as shown in the photo and apply power to the box --- and hold ---
2. apply power to the box
3. Connect TV box to your PC (use USB Male-Male cable)
How do I make my computer recognize my box as a disk drive and not as a usb mtp devic
How do I make my computer recognize my box as a disk drive and not as a usb mtp device?
Has anyone used this guide to revert back to Marshmallow after flashing Nougat Beta FW?
fail unbrick MDZ-19-AA
dimdim87 said:
i have to know als well
Click to expand...
Click to collapse
My Box start and stop on Grey screen after try to chang ROM
I´m try to UNBRICK my Xiaomi TV box and The method fail on my MDZ-19-AA
1% stop - ""ROMCODE/INITIALIZA DDR BUFFER/READ ITEM DATA FALIED""
How can i fix this???
Holy Mother God !!! it Worked ....thank you very much!!!
Do you have mibox 3s MDZ-19-AA firmware image,My mibox is brick too,but it is mibox 3s.
MDZ-19-AA bricked!
Hi,
I followed the instructions but unfortunately dont seem to work with the model MDZ-19-AA. I guess is due to the img file which is only for MDZ-16 model.
by any change someone could tell me how to proceed to save my bricked box 3s? I dont find a full firmware for it.
any other way to restore the any system on it?
many thanks !
jacortijo said:
Hi,
I followed the instructions but unfortunately dont seem to work with the model MDZ-19-AA. I guess is due to the img file which is only for MDZ-16 model.
by any change someone could tell me how to proceed to save my bricked box 3s? I dont find a full firmware for it.
any other way to restore the any system on it?
many thanks !
Click to expand...
Click to collapse
Search xiaomi eu - mdz 19 aa
I did search there and google during several hours without luck, all the instructions are always for 16-ZZ.
I also found a link to the firmware full for 19-AA but I dont manage to register properly in yandex service.
http://en.miui.com/thread-323779-1-1.html
I also tried to flash the images published here but the USB burning tool is not able to load them.
https://androidfilehost.com/?w=files&flid=140483
do you have any other img I could use for 19-AA
I really dont know what else to do... :/
Google Search : huong dan flash global rom cho mibox 3s mdz 19 aa
preuss65 said:
Google Search : huong dan flash global rom cho mibox 3s mdz 19 aa
Click to expand...
Click to collapse
I did the search but still no luck, I found a full image for 19-AA
http://miui.vn/forum/threads/huong-dan-nang-cap-ha-cap-firmware-mi-box-tong-hop-stock-firmware-cho-mi-box-offline-update.37845/#post-478579
and some other several img files from Long Çhïvaš, he is wellknow for dealing with xiaomi boxes... but no luck either.
https://androidfilehost.com/?fid=385035244224407797
but when I try to load them in the USB burning tool, the tools doesnt accept it. Many of the "full images" I find in Internet are not a img file. They are an update.zip file... and the tool only support img files.
I am out of luck...
jacortijo said:
I did the search but still no luck, I found a full image for 19-AA
http://miui.vn/forum/threads/huong-dan-nang-cap-ha-cap-firmware-mi-box-tong-hop-stock-firmware-cho-mi-box-offline-update.37845/#post-478579
and some other several img files from Long Çhïvaš, he is wellknow for dealing with xiaomi boxes... but no luck either.
https://androidfilehost.com/?fid=385035244224407797
but when I try to load them in the USB burning tool, the tools doesnt accept it. Many of the "full images" I find in Internet are not a img file. They are an update.zip file... and the tool only support img files.
I am out of luck...
Click to expand...
Click to collapse
Xiaomi created update.zip files can be flashed from standard recovery menu. Copy file to usb thumb drive.
when turning on mibox
hold home and menu together til you enter recover menu
Related
Hello,
i root my p780, google play service app was not working properly so i download p780 source code and tried to copy paste system all apps then operating system crashed once turn on the mobile only logo stuck bootloader also not coming and Unable to Install Any ROM File on P780 4GB, i tried with SP Flash tool its stuck on searching i installed MTK65xx preloader also same stuck on searching, I visited lenovo service center but service men told he can't install latest update for this mobile. somebody please tell me how can i install the rom file....
vikili said:
Hello,
i root my p780, google play service app was not working properly so i download p780 source code and tried to copy paste system all apps then operating system crashed once turn on the mobile only logo stuck bootloader also not coming and Unable to Install Any ROM File on P780 4GB, i tried with SP Flash tool its stuck on searching i installed MTK65xx preloader also same stuck on searching, I visited lenovo service center but service men told he can't install latest update for this mobile. somebody please tell me how can i install the rom file....
Click to expand...
Click to collapse
What you have to do is to install the drivers and flash any other firmware. Look on my post Rooting tutorial for kitkat, in q&a section.
Pm me if you dont understand something.
Sent from my P780 using XDA-Developers mobile app
stympy said:
What you have to do is to install the drivers and flash any other firmware. Look on my post Rooting tutorial for kitkat, in q&a section.
Pm me if you dont understand something.
Sent from my P780 using XDA-Developers mobile app
Click to expand...
Click to collapse
You are not understanding my problem my phone is dead once turn on its showing only like this below image, so give proper solution.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
vikili said:
You are not understanding my problem my phone is dead once turn on its showing only like this below image, so give proper solution.
Click to expand...
Click to collapse
The proper solution is to reflash your firmware , or if you can enter to recovery is to factory reset!
See what is going on. If you cant enter in to the recovery you must reflash your original firmware.
Tell me if you need to reflash the stock firmware.
How Can i Reflash can you guide me
vikili said:
How Can i Reflash can you guide me
Click to expand...
Click to collapse
Hi.
Read this small tutorial twice.
Here are the drivers: http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605/page12
Look at the bottom of that page.
Install first the exe file, then reboot your PC. WARRNING: you must have Win.XP or Win.7 installed.
Download stock firmware from here: http://forum.xda-developers.com/lenovo-p780/development/p780-stock-rom-links-t2842399
After flash you will have firmware: ROW S124 JellyBean. If you want KitKat you must do OTA Updates or download those packs and install them from your phone by turn. OTA is my advice till S228. S2287 is the lates and last official updates.
Download SP Flash Tools from here: https://drive.google.com/folderview?id=0B_B98oK4DpK1S1l2bXRkTGxhVFk&usp=sharing
Unzip all to separare folders.
Next step is: Power down your phone.
Open device manager.
Plug the usb cable to your phone and to the PC.
In the device manager you will si first MTK65XX... device detected and after this drivers should install.
After drivers are installed disconnect the phone.
Now open spflash tool v5
Load scater file from the folder of the firmware.
In the download tab not button select firmware upgrade - nothing else.
Now press download button and plug the usb cable to your phone.
Flashing should start.
After flash one green circle with ok should appear.
After this remove the usb cable and start your phone.
If your phone is not starting you must repeat the procedure with the new preloader.
Look on your phone box and see if your phone is made after 03.2014.
If it is you must replace curent preloader with new one.
Link to new preloader: https://drive.google.com/folderview...VQ3pJeG9vTlh4Y3pMUG9ES3FtX21ZdjlwVzY3VWc#list
Use only that preloader.
Good Luck. :good:
why that Sp Flash Tool Stuck on Searching
vikili said:
why that Sp Flash Tool Stuck on Searching
Click to expand...
Click to collapse
Could be drivers or... you must reset the phone right before usb cable is inserted.
I tried to flash Lenovo Tab 3 730x.this device is currently in a bricked stage.messed up i guess.what i did was through sp flash tool i formatted the flash (probably including boot loader).now shows only charging signal.when connected to windows its showing mtk usb port via UsbDview.I successfully installed usb vcom driver.i have the rom file and flash tool.but SP flash tool giving an error .error msg is S_SECURITY_SLA FAIL (6004), MSP ERROE(NOT ERROR) CODE 0x00.please help.thanks in advance:crying:
Hi,
me too, exactly the same problem
I`ve got unlock bootloader, and from TWRP I stupid idiot write the system part...
Now any of version SP Flash cannot connect to my tab. I try 3 comps with diferrent ver of Win...
Ones (I dont know why) flash dones successfull...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But its not good finish for me, its the same state, right now. :crying:
Somebody of masters help as, please?
Krabat.
krabat said:
Hi,
me too, exactly the same problem
I`ve got unlock bootloader, and from TWRP I stupid idiot write the system part...
Now any of version SP Flash cannot connect to my tab. I try 3 comps with diferrent ver of Win...
Ones (I dont know why) flash dones successfull...
But its not good finish for me, its the same state, right now. :crying:
Somebody of masters help as, please?
Krabat.
Click to expand...
Click to collapse
Hey can you give me the link of rom file, sp flash tool and driver ? May be I can give it a try
Hi,
i finally unbrick my tablet!!! after 3 days and night, i dont beleve allready, its posible...
drivers: IMHO it does not matter witch version of drivers you use...
tool: i used SP_Flash_Tool_v5.1552.00_SecureBoot. if flash tool doesn`t start with missing MSVCR100.dll, try use another comp (my notebook Win7x64 = 6004 error, PC Win7x86 = red line to 100% > 2004 or 2005 error). Must use MKT_AllinOne_DA.bin and auth_sv5.auth, tablet without battery, no any vol+/- button hold, just start download in serurity mode and plug microusb to tablet.
stock: TB3-730X_S038_170627_ROW. i tried TB3-730X_S033_160707_ROW, TB3-730X_S037_161228_ROW but TB3-730X_S038_170627_ROW roms flash finish successfull.
links:
rom, stock, drivers: https://cloud.mail.ru/public/4bXW/WHjeWWTPG
Happy Krabat.
krabat said:
Hi,
i finally unbrick my tablet!!! after 3 days and night, i dont beleve allready, its posible...
drivers: IMHO it does not matter witch version of drivers you use...
tool: i used SP_Flash_Tool_v5.1552.00_SecureBoot. if flash tool doesn`t start with missing MSVCR100.dll, try use another comp (my notebook Win7x64 = 6004 error, PC Win7x86 = red line to 100% > 2004 or 2005 error). Must use MKT_AllinOne_DA.bin and auth_sv5.auth, tablet without battery, no any vol+/- button hold, just start download in serurity mode and plug microusb to tablet.
stock: TB3-730X_S038_170627_ROW. i tried TB3-730X_S033_160707_ROW, TB3-730X_S037_161228_ROW but TB3-730X_S038_170627_ROW roms flash finish successfull.
links:
rom, stock, drivers: https://cloud.mail.ru/public/4bXW/WHjeWWTPG
Happy Krabat.
Click to expand...
Click to collapse
what is IMHO drivers? still in bricked state..please help
tomas11111 said:
what is IMHO drivers? still in bricked state..please help
Click to expand...
Click to collapse
How can I use auth.5 file with this sp tool version? There is no option for selecting the auth file. Please help
How can I enable security mode of sp flash tool
tomas11111 said:
what is IMHO drivers? still in bricked state..please help
Click to expand...
Click to collapse
Hi,
I`m so sorry for my late answear.
Do You still in hell with your Lenovo?
Krabat.
krabat said:
Hi,
i finally unbrick my tablet!!! after 3 days and night, i dont beleve allready, its posible...
drivers: IMHO it does not matter witch version of drivers you use...
tool: i used SP_Flash_Tool_v5.1552.00_SecureBoot. if flash tool doesn`t start with missing MSVCR100.dll, try use another comp (my notebook Win7x64 = 6004 error, PC Win7x86 = red line to 100% > 2004 or 2005 error). Must use MKT_AllinOne_DA.bin and auth_sv5.auth, tablet without battery, no any vol+/- button hold, just start download in serurity mode and plug microusb to tablet.
stock: TB3-730X_S038_170627_ROW. i tried TB3-730X_S033_160707_ROW, TB3-730X_S037_161228_ROW but TB3-730X_S038_170627_ROW roms flash finish successfull.
links:
rom, stock, drivers: https://cloud.mail.ru/public/4bXW/WHjeWWTPG
Happy Krabat.
Click to expand...
Click to collapse
Hi,
I think I have the same Problem and the link is broken, can you provide me the files? Thank you
Julian
I have a problem, after flash element V1.1 EMUI 8.0,I have a FRP lock, i was so stupid to relock OEM, and now i just boot into erecovery, can not unlock the OEM :
(bootloader) Necessary to unlock FRP!
(bootloader) Navigate to Developer options, and enable "OEM unlock"!
FAILED (remote: Command not allowed),
now, how to flash stock firmwave or unbrick. please help me.
NMHT said:
I have a problem, after flash element V1.1 EMUI 8.0,I have a FRP lock, i was so stupid to relock OEM, and now i just boot into erecovery, can not unlock the OEM :
(bootloader) Necessary to unlock FRP!
(bootloader) Navigate to Developer options, and enable "OEM unlock"!
FAILED (remote: Command not allowed),
now, how to flash stock firmwave or unbrick. please help me.
Click to expand...
Click to collapse
Hello
are elemental rom starts?
_ go to k-setting parameter, tell him to restart in recovery twrp (I think it will be in Chinese).
if it works you can use the HuRupdater tool to reinstall a complete emui 8.0 firmware.
if the rom does not start, do not know your phone version (oem).
I can recommend dc-unlock, dc-phoenix v52 +15 crédits
and reinstall a full firmware of your version.
Chisetdel31260 said:
Hello
are elemental rom starts?
_ go to k-setting parameter, tell him to restart in recovery twrp (I think it will be in Chinese).
if it works you can use the HuRupdater tool to reinstall a complete emui 8.0 firmware.
if the rom does not start, do not know your phone version (oem).
I can recommend dc-unlock, dc-phoenix v52 +15 crédits
and reinstall a full firmware of your version.
Click to expand...
Click to collapse
I can not boot the rom, boot loop erecovery and recovery stock, my device is RNE-L22C636
now, how to back stock rom. :crying::crying:, please help me
Search for dc-phoenix it should help you even if its bricked
Chisetdel31260 said:
Hello
are elemental rom starts?
_ go to k-setting parameter, tell him to restart in recovery twrp (I think it will be in Chinese).
if it works you can use the HuRupdater tool to reinstall a complete emui 8.0 firmware.
if the rom does not start, do not know your phone version (oem).
I can recommend dc-unlock, dc-phoenix v52 +15 crédits
and reinstall a full firmware of your version.
Click to expand...
Click to collapse
How do I contact you?
i need dc-unlock, dc-phoenix v52 +15 crédits
NMHT said:
How do I contact you?
i need dc-unlock, dc-phoenix v52 +15 crédits
Click to expand...
Click to collapse
you need dc-unlocker, to detect the device and access the support area.
https://www.dc-unlocker.com/downloads/get/7JPrdoVQ
after, you need to install the tool dc-phoenix v52,
https://files.dc-unlocker.com/share.html?v=share/D5E38E4A4EF446F6B58AD9DDE1C36FE7
with you can reinstall a full firmware for your device in your version
Chisetdel31260 said:
you need dc-unlocker, to detect the device and access the support area.
https://www.dc-unlocker.com/downloads/get/7JPrdoVQ
after, you need to install the tool dc-phoenix v52,
https://files.dc-unlocker.com/share.html?v=share/D5E38E4A4EF446F6B58AD9DDE1C36FE7
with you can reinstall a full firmware for your device in your version
Click to expand...
Click to collapse
I do not have a DCPhoenix_v52 account, dc-unlocker does not recognize the device, does not recognize the port, my device only gets into fastboot and erecovery, but dc-unlocker does not recognize the port,
DC - Unlocker 2 Client 1.00.1396
Detecting phone :
selection :
manufacturer - Huawei phones
model - Huawei Nova 2i
Selected Applications port COM9
Selected Diagnostics port COM9
Phone not found !
Online Method with Erecovery
To be sucessfull here Phone needs to get the OEMINFO.Bin or HWOTA OEMINFO from TWRP or HWOTA
Unlock Bootloader doesnt matter, at least a proper OEMINFO needs to get flashed
1:First set your Router to DNS 81.177.139.39 truly complete, that means all traffic routed throght this DNS
DNS: Primary 81.177.139.39 Secondary 81.177.139.39 It wont work if you dont edit it complete
2 Open Firmware Finder PC Programm Now click on common Base. Now look for your Firmware (same as your OEMINFO ) Now on your Firmware Changelog link rightclick. Copy und on Firmware Access
Please check if its working.
Now on Firmware Proxy , give in link Changelog.xml and click on Set.
Now on Register Update example like http://update.hicloud.com:8180/TDS/d.../changelog.xml
You registered fw ......... for ip 77.66.44.31.2
Now restart phone in erecovery . Now choose Network with Router DNS with 81.177.139.39
Connect and Firmware should load like Funky Huawei like .
Works 100%, No bad flashed Firmware anymore.
tested and work perfectlyy
i used OEMINFO RNE-L22C636, I found the right firmwave :http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2722/g1699/v137961/f1/full/changelog.xml
, but I got an error getting falied info package, how to fix that,please help me
have you a card memory?
thugsalah said:
have you a card memory?
Click to expand...
Click to collapse
yes, i have card memory
I use update.app but it's bigger than 4gb, memory card in fat32 format can not copy, so now I have to do
NMHT said:
I use update.app but it's bigger than 4gb, memory card in fat32 format can not copy, so now I have to do
Click to expand...
Click to collapse
use an adapter to plug it into a computer and format the sd card as ntfs
baoprokute1234 said:
use an adapter to plug it into a computer and format the sd card as ntfs
Click to expand...
Click to collapse
i try but falled, update falled
for me the dns method has work !! my bad
Hi the reason is you used an unapproved firmware.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In your case, you can use this version:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2722/g1699/v129170/f1/full/changelog.xml
I am following this post for same issue.
I changed the DNS to 81.177.139.39 under the heading in my route: Use the following Static DNS IP address
I set both primary and secondary DNS, apply/save chnages, the Firmware changlog link is approved as checked from Firmware finder.
But I am not sure about this step:
Now on Firmware Proxy , give in link Changelog.xml and click on Set.
I dont see any 'Set' button or link any where in firmware finder version 1.5.6.1
But eRecovery will still show error Getting package info failed
Plz help me what am I missing
Hi guys. I have a Skyworth hp4024 (hp40a) which is the same as Strong Leap-s1 or Mecool KM2. It is probably based on s905x2 and the RAM is DDR4 - at least that's what the system info on the box says. I got it from my iptv provider but I can't get out of a factory launcher so the box is useless except for iptv. There is no reset button, developer options can't be enabled because it says 'developer options are not available for this user' so I can't connect to it via adb. Can you help me figure out short pins on the box? I tried shorting some but the box wasn't recognised in the burning tool.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
...
Thanks. I tried replacing some files in the ota.zip and flashing it via update menu entry but it wouldn't install because it wasn't signed with the proper keys probably.
kalehrl said:
Hi guys. I have a Skyworth hp4024 (hp40a) which is the same as Strong Leap-s1 or Mecool KM2. It is probably based on s905x2 and the RAM is DDR4 - at least that's what the system info on the box says. I got it from my iptv provider but I can't get out of a factory launcher so the box is useless except for iptv. There is no reset button, developer options can't be enabled because it says 'developer options are not available for this user' so I can't connect to it via adb. Can you help me figure out short pins on the box? I tried shorting some but the box wasn't recognised in the burning tool.
View attachment 5577423 View attachment 5577425
Click to expand...
Click to collapse
Try to enter android settings menu by pressing #1397# on remote
kalehrl said:
Hi guys. I have a Skyworth hp4024 (hp40a) which is the same as Strong Leap-s1 or Mecool KM2. It is probably based on s905x2 and the RAM is DDR4 - at least that's what the system info on the box says. I got it from my iptv provider but I can't get out of a factory launcher so the box is useless except for iptv. There is no reset button, developer options can't be enabled because it says 'developer options are not available for this user' so I can't connect to it via adb. Can you help me figure out short pins on the box? I tried shorting some but the box wasn't recognised in the burning tool.
View attachment 5577423 View attachment 5577425
Click to expand...
Click to collapse
For recovery mode put together this two pins
I know about that but you can't do anything interesting there.
lilici said:
For recovery mode put together this two pins
Click to expand...
Click to collapse
The "pins" you highlight both go to ground. They are already "put together".
I do have the same thing with similar version of skyworth tv box.
I couldn't figure out how to hard reset the device. And there is no reset button
Any idea how to reset the device?
Another photo
New item by Scatteril
photos.app.goo.gl
For factory reset, unpack this folder on a flash drive and plug it in the box. Reboot it and it should reset.
489 byte file on MEGA
mega.nz
kalehrl said:
For factory reset, unpack this folder on a flash drive and plug it in the box. Reboot it and it should reset.
489 byte file on MEGA
mega.nz
Click to expand...
Click to collapse
Works with what model?
Should work with this one and Mecool KM2
My
kalehrl said:
Should work with this one and Mecool KM2
Click to expand...
Click to collapse
My device model is : Hp4105-integral will it work with it?
I don't know. Try it
My
kalehrl said:
I don't know. Try it
Click to expand...
Click to collapse
Thank you.
It did the reset.
But not hard reset.
The reset that kept the latest update. Not the stock frameware which I need
After full upgrade, it's impossible to return to the previous version even after reset.
kalehrl said:
After full upgrade, it's impossible to return to the previous version even after reset.
Click to expand...
Click to collapse
The company issued an update that blocks activating the developer mode. With the setting and with developer tool app (which gives a black screen)
The whole thing I'm trying is to go activate the developer options back either by going back one update or activating the developer options somehow.
Any help and I'll be very greatful
Maybe only if you have the zip of the previous firmware with the developer options. My box is also locked. There is a secret menu, you activate developer options but they are disabled. It says 'not available for this user'
kalehrl said:
Maybe only if you have the zip of the previous firmware with the developer options. My box is also locked. There is a secret menu, you activate developer options but they are disabled. It says 'not available for this user'
Click to expand...
Click to collapse
I may not be blocked yet with me . What was it?
#1397#
But it's probably operator specific.
From: How to Unbrick Tab A7 Lite using SP Flash Tool.
CustomAP 2022
The only way to get away from the official firmware. Changes Degoogle (LeOS-TD.2.0 ) A13 GSI Home Launcher For SM-T225 FastbootD ☆☆☆ Tips and Tricks For [ LOS TD Unofficial GSI ] latest 2023-03-24 microG...
forum.xda-developers.com
All process are ...
STEP 1: Download the SP Flash Tool & MTK meta Utility
STEP 2: Download Stock Firmware
STEP 3: Extract Stock Firmware by MTK META Utility
STEP 4: Install MediaTek USB Drivers
STEP 5: Establish Link between Tab A7 Lite and SP Flash Tool
STEP 6: Flash Stock Firmware and Unbrick Device via SP Flash Tool
≥≥≥≥≥≥≥≥≥≥≥≥
Let begin..Step 3 ( if you are in a hurry.) --except step 4,5
SP Flash tool : SP_Flash_Tool_v5.2052_Windows.zip https://androidfilehost.com/?fid=17248734326145726480
MTK META Utility V44 https://mega.nz/file/8HJGXJKD#uvapZWuTits6LkzsW0ZRpmn1RZqbVu34TwCnunxoi2wNew V52 https://romadd.com/mtk-meta-utility-tool-free/
SCATTER FILE FROM A11, A12 Samsung Stock Firmware : make yourself with tools mtk meta util
Howto
1.Download and extract firmware into folder.
2.Open MTK META UTIL
Select right tab "Android ---> Extract Samsung ROM (MTK)
Then select your extracted firmware (folder)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's creates FIRMWARE_UNPACKED folder. Within all firmware files for SP Flash tool
3. Open SP Flash tool (....import scatter file.)
Connect your tab with Computer. Windows Device Manager will recognize Samsung Tab A7 Lite. If not ...try this
# power Off then connect it to PC via USB cable and hit the Volum down once.
# power Off then connect USB cable with PC one end , press & hold Vol Up + Vol down , then connect one end USB with Tab
Or install this windows Driver.
MediaTek_USB_Drivers.exe | by Droidwin for Misc. Software & Hardware Resources
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
IF YOU CAN'T MAKE THIS CONNECTION, U HAD BROKEN TAB MAINBOARD ALREADY. SORRY FOR THAT.
____You can stop now.
- Navigate to the extracted firmware folder which processed by MTK Util
(Firmware_Unpacked) and there should be a scatter text file, something
along the lines of MTxxxx>Android>scatter.txt. Select that file and click Open.
-Doing so will automatically load the required files to their respective partitions.
in the SP Flash Tool.
- Untick the preloader section of the tool as we don’t have to flash that partition.
(Try this first )
- Once done, click on the Download button situated at the top menu bar and
wait for the process to complete.
- As soon as the flashing is complete, you should get the Download OK message.
. You may now remove your device from the PC and turn it on via the Power key (if that doesn’t happen automatically).
Its will flash all extracted files of firmware like Odin
Meet you tab alive again.
Thank you for help , I try later
but , I need fix verified boot enable
again
Difficul said:
View attachment 5701107
again
Click to expand...
Click to collapse
Don't used preloader, tick off
tom.android said:
Don't used preloader, tick off
Click to expand...
Click to collapse
same
tom.android said:
Click to expand...
Click to collapse
i looked and it's not the solution
Today , i connect Tab with computer and
How to fix this ?
mine is still in repair shop he still hasnt fixed it yet it will come in some days if its not fixed i will try this method
actually there is a tool for disabling verification
just use mtk meta utility
so click disable auth bypass and connect then it will stop connecting and disconnecting
Hope it healthy.
zenitsu man said:
View attachment 5707121
so click disable auth bypass and connect then it will stop connecting and disconnecting
Click to expand...
Click to collapse
Ok I use this before use Sp tool every time
and still get the error
prince2047 said:
View attachment 5785071
Click to expand...
Click to collapse
You need to use unlock tool : crask version of buy it
How bricked , tell what u people did to brick to avoid using this guide in the future
ozmage said:
How bricked , tell what u people did to brick to avoid using this guide in the future
Click to expand...
Click to collapse
Never flash an incompatible operating system or upgrade without a BL (bootloader) like samsung
Difficul said:
Never flash an incompatible operating system or upgrade without a BL (bootloader) like samsung
Click to expand...
Click to collapse
did you fixed your device ?