FRP lock - Huawei Mate 10 Questions & Answers

I have a problem, after flash element V1.1 EMUI 8.0,I have a FRP lock, i was so stupid to relock OEM, and now i just boot into erecovery, can not unlock the OEM :
(bootloader) Necessary to unlock FRP!
(bootloader) Navigate to Developer options, and enable "OEM unlock"!
FAILED (remote: Command not allowed),
now, how to flash stock firmwave or unbrick. please help me.

---

NMHT said:
I have a problem, after flash element V1.1 EMUI 8.0,I have a FRP lock, i was so stupid to relock OEM, and now i just boot into erecovery, can not unlock the OEM :
(bootloader) Necessary to unlock FRP!
(bootloader) Navigate to Developer options, and enable "OEM unlock"!
FAILED (remote: Command not allowed),
now, how to flash stock firmwave or unbrick. please help me.
Click to expand...
Click to collapse
Hello
are elemental rom starts?
_ go to k-setting parameter, tell him to restart in recovery twrp (I think it will be in Chinese).
if it works you can use the HuRupdater tool to reinstall a complete emui 8.0 firmware.
if the rom does not start, do not know your phone version (oem).
I can recommend dc-unlock, dc-phoenix v52 +15 crédits
and reinstall a full firmware of your version.

---

Chisetdel31260 said:
Hello
are elemental rom starts?
_ go to k-setting parameter, tell him to restart in recovery twrp (I think it will be in Chinese).
if it works you can use the HuRupdater tool to reinstall a complete emui 8.0 firmware.
if the rom does not start, do not know your phone version (oem).
I can recommend dc-unlock, dc-phoenix v52 +15 crédits
and reinstall a full firmware of your version.
Click to expand...
Click to collapse
I can not boot the rom, boot loop erecovery and recovery stock, my device is RNE-L22C636
now, how to back stock rom. :crying::crying:, please help me

---

Search for dc-phoenix it should help you even if its bricked

---

Chisetdel31260 said:
Hello
are elemental rom starts?
_ go to k-setting parameter, tell him to restart in recovery twrp (I think it will be in Chinese).
if it works you can use the HuRupdater tool to reinstall a complete emui 8.0 firmware.
if the rom does not start, do not know your phone version (oem).
I can recommend dc-unlock, dc-phoenix v52 +15 crédits
and reinstall a full firmware of your version.
Click to expand...
Click to collapse
How do I contact you?
i need dc-unlock, dc-phoenix v52 +15 crédits

---

NMHT said:
How do I contact you?
i need dc-unlock, dc-phoenix v52 +15 crédits
Click to expand...
Click to collapse
you need dc-unlocker, to detect the device and access the support area.
https://www.dc-unlocker.com/downloads/get/7JPrdoVQ
after, you need to install the tool dc-phoenix v52,
https://files.dc-unlocker.com/share.html?v=share/D5E38E4A4EF446F6B58AD9DDE1C36FE7
with you can reinstall a full firmware for your device in your version

---

Chisetdel31260 said:
you need dc-unlocker, to detect the device and access the support area.
https://www.dc-unlocker.com/downloads/get/7JPrdoVQ
after, you need to install the tool dc-phoenix v52,
https://files.dc-unlocker.com/share.html?v=share/D5E38E4A4EF446F6B58AD9DDE1C36FE7
with you can reinstall a full firmware for your device in your version
Click to expand...
Click to collapse
I do not have a DCPhoenix_v52 account, dc-unlocker does not recognize the device, does not recognize the port, my device only gets into fastboot and erecovery, but dc-unlocker does not recognize the port,
DC - Unlocker 2 Client 1.00.1396
Detecting phone :
selection :
manufacturer - Huawei phones
model - Huawei Nova 2i
Selected Applications port COM9
Selected Diagnostics port COM9
Phone not found !

---

Online Method with Erecovery
To be sucessfull here Phone needs to get the OEMINFO.Bin or HWOTA OEMINFO from TWRP or HWOTA
Unlock Bootloader doesnt matter, at least a proper OEMINFO needs to get flashed
1:First set your Router to DNS 81.177.139.39 truly complete, that means all traffic routed throght this DNS
DNS: Primary 81.177.139.39 Secondary 81.177.139.39 It wont work if you dont edit it complete
2 Open Firmware Finder PC Programm Now click on common Base. Now look for your Firmware (same as your OEMINFO ) Now on your Firmware Changelog link rightclick. Copy und on Firmware Access
Please check if its working.
Now on Firmware Proxy , give in link Changelog.xml and click on Set.
Now on Register Update example like http://update.hicloud.com:8180/TDS/d.../changelog.xml
You registered fw ......... for ip 77.66.44.31.2
Now restart phone in erecovery . Now choose Network with Router DNS with 81.177.139.39
Connect and Firmware should load like Funky Huawei like .
Works 100%, No bad flashed Firmware anymore.
tested and work perfectlyy

---

i used OEMINFO RNE-L22C636, I found the right firmwave :http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2722/g1699/v137961/f1/full/changelog.xml
, but I got an error getting falied info package, how to fix that,please help me

---

have you a card memory?

---

thugsalah said:
have you a card memory?
Click to expand...
Click to collapse
yes, i have card memory

---

I use update.app but it's bigger than 4gb, memory card in fat32 format can not copy, so now I have to do

---

NMHT said:
I use update.app but it's bigger than 4gb, memory card in fat32 format can not copy, so now I have to do
Click to expand...
Click to collapse
use an adapter to plug it into a computer and format the sd card as ntfs

---

baoprokute1234 said:
use an adapter to plug it into a computer and format the sd card as ntfs
Click to expand...
Click to collapse
i try but falled, update falled

---

for me the dns method has work !! my bad

---

Hi the reason is you used an unapproved firmware.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In your case, you can use this version:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2722/g1699/v129170/f1/full/changelog.xml

---

I am following this post for same issue.
I changed the DNS to 81.177.139.39 under the heading in my route: Use the following Static DNS IP address
I set both primary and secondary DNS, apply/save chnages, the Firmware changlog link is approved as checked from Firmware finder.
But I am not sure about this step:
Now on Firmware Proxy , give in link Changelog.xml and click on Set.
I dont see any 'Set' button or link any where in firmware finder version 1.5.6.1
But eRecovery will still show error Getting package info failed
Plz help me what am I missing