Hello everyone,i have a lenovo P780 4gb.My phone is bricked,so i started to find a way to revive it,so after searching i find these thread.I follow the instructions of post 16 but flash tool shows me error S_DL_PMT_ERR_NO_SPACE(5069) on download and 8045 pmt error on firmware upgrade,during purple bar.So my p780 still remains dead.What else could i do?The battery has a code on it, like 140413
christheod92 said:
Hellow everyone,i have a lenovo P780 4gb.My phone is bricked,so i started to find a way to revive it,so after searching i find these thread.I follow the instructions of post 16 but flash tool shows me error S_DL_PMT_ERR_NO_SPACE(5069) on download and 8045 pmt error on firmware upgrade,during purple bar.So my p780 still remains dead.What else could i do?The battery has a code on it, like 140413
Click to expand...
Click to collapse
Hi. What firmware do you want to flash ?
What SP Flash tool do you use?
What windows do you use?
Do you know if your drivers are installed correctly?
stympy said:
Hi. What firmware do you want to flash ?
What SP Flash tool do you use?
What windows do you use?
Do you know if your drivers are installed correctly?
Click to expand...
Click to collapse
WINDOWS 7 PROF 64BIT
SP FLASH TOOL V3 AND V5
I have tried P780_S129_130710 ROM and several others rom,with old and new preloader.Each time flash didnt even start,until i combined P780_S129_130710 ROM with new prelooader,and start the prroblem i discribe above.I think the drivers are installed correct because the flash tool recognise my phone as mediatek preloader usb vcom(android)
The phone was given to me bricked,and i dont know what cause the problem
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/url][/IMG]
any ideas?
christheod92 said:
any ideas?
Click to expand...
Click to collapse
Hi. Try first to flash wit SP Flash Tool from q&a section/rooting tutorial for kitkat.
Those tools are modified for our phone.
I dont know what to say... If your phone was running kitkat when stopped working you must use sp flash tool v5. If not you can use v3.
Now this error appears when you have a problem with flash area. There are 2 possibilities:
1. Damaged chipset on motherboard
2. Modified firmware, too big for your flash space.
Send from my Lenovo P1 Vibe Pro
stympy said:
Hi. Try first to flash wit SP Flash Tool from q&a section/rooting tutorial for kitkat.
Those tools are modified for our phone.
I dont know what to say... If your phone was running kitkat when stopped working you must use sp flash tool v5. If not you can use v3.
Now this error appears when you have a problem with flash area. There are 2 possibilities:
1. Damaged chipset on motherboard
2. Modified firmware, too big for your flash space.
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
ok thanks,one last thing,how can i check if my motherboard is faulty?If i run memory test from sp flash tool will it show it?
christheod92 said:
ok thanks,one last thing,how can i check if my motherboard is faulty?If i run memory test from sp flash tool will it show it?
Click to expand...
Click to collapse
Yes. Try and see what is going on.
Send from my Lenovo P1 Vibe Pro
alocut said:
How do I copy 2 files from my Computer (D:\abc\file1 and D:\abc\file2) to data/nvram/APCFG/APRDEB/ (In my Device) via ADB command only ?
Click to expand...
Click to collapse
What happened to your phone?
Why do you want to copy the files, from adb?
Your phone is rooted?
Did you lost your IMEI?
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
stympy said:
What happened to your phone?
Why do you want to copy the files, from adb?
Your phone is rooted?
Did you lost your IMEI?
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
Click to expand...
Click to collapse
Yes, rooted and Lost IMEI.
My phone: Lenovo P780 ( 8GB ). Fastest way to fix IMEI error ?
alocut said:
Yes, rooted and Lost IMEI.
My phone: Lenovo P780 ( 8GB ). Fastest way to fix IMEI error ?
Click to expand...
Click to collapse
Hi.
Look here for 2 tutorials :
http://forum.xda-developers.com/lenovo-p780/help/imei-nvram-restore-tools-t3174563
With this 2 tutorials i have repaired some phones. Especialy the second tutorial.
Good Luck.
Related
Hi, guys!
I have a problem with SP Flash Tool. I'm trying to install CWM Recovery into Fly IQ444 Quatro (it is the same, as Gionee Dream D1/GN878), using this manual
After starting of flashing i got this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What does it mean? What can I do to solve this issue?
I am not sure if it was the same error, but I had something similar with my Allview P6 Stony. I fixed it by using a different (in my case older) version of SP Flash tool.
May be trying another version will help you too??
My phone is not the same as yours, but in the end I used the version of SP Falshtool I posted here: http://forum.xda-developers.com/showpost.php?p=43678784&postcount=46
I hope this might help you.
Regards,
Salvolin
flash tool problem
scan4u said:
Hi, guys!
I have a problem with SP Flash Tool. I'm trying to install CWM Recovery into Fly IQ444 Quatro (it is the same, as Gionee Dream D1/GN878), using this manual
After starting of flashing i got this:
What does it mean? What can I do to solve this issue?
Click to expand...
Click to collapse
The problem is with the scatter file and you have to alter a line in it.
Take a look on this post from a greek forum (use google translate)
http://www.myphone.gr/forum/showthread.php?p=4807552
Find th error on SP_FLASH_TOOL.log and then copy the anticipated value to the scatter file .
Save the file and reload it to flash tool.
thanx it works but u need to change quiet a few values.. before it finally works
Pakistani_1 said:
thanx it works but u need to change quiet a few values.. before it finally works
Click to expand...
Click to collapse
Same problem here. Can you tell me how you fixed it please?
e1911_v77_ht_6628_s3_v20
HRSB said:
Same problem here. Can you tell me how you fixed it please?
Click to expand...
Click to collapse
same problem
same here, i cant restore my tab tried nearly all versions of sp flash tool uploading screenshots and log file now
Go here http://www.phcorner.net/threads/fix-error-8038-in-sp-flash-tool.64302/
sunu792002 said:
Go here http://www.phcorner.net/threads/fix-error-8038-in-sp-flash-tool.64302/
Click to expand...
Click to collapse
Didn't work, mtk droid tool creates a wrong scatter file, this is the error i got in sp flash tool log file
Thank You
Salvolin said:
I am not sure if it was the same error, but I had something similar with my Allview P6 Stony. I fixed it by using a different (in my case older) version of SP Flash tool.
May be trying another version will help you too??
My phone is not the same as yours, but in the end I used the version of SP Falshtool I posted here: http://forum.xda-developers.com/showpost.php?p=43678784&postcount=46
I hope this might help you.
Regards,
Salvolin
Click to expand...
Click to collapse
Thank You, my phone is back
can someone explain what this is asking me to do?
NOT MATCH: load item key(PRELOAD), value(0x3d40000), target item key(ANDROID), value(0x3d40000).(.\NandLayoutParameter.cpp,139)
still having the same problem!
Salvolin said:
I am not sure if it was the same error, but I had something similar with my Allview P6 Stony. I fixed it by using a different (in my case older) version of SP Flash tool.
May be trying another version will help you too??
My phone is not the same as yours, but in the end I used the version of SP Falshtool I posted here: http://forum.xda-developers.com/showpost.php?p=43678784&postcount=46
I hope this might help you.
Regards,
Salvolin
Click to expand...
Click to collapse
i am using canvas juice a177. my device imei has got invalid. got flash the stock rom but when am trying....i am having the same problem tried using the version of flashtools u gave in the ink.. but when am loading from there it is showing invalid scatter file format! what should i do? plz help me?
scan4u said:
Hi, guys!
I have a problem with SP Flash Tool. I'm trying to install CWM Recovery into Fly IQ444 Quatro (it is the same, as Gionee Dream D1/GN878), using this manual
After starting of flashing i got this:
What does it mean? What can I do to solve this issue?
Click to expand...
Click to collapse
Hey, i have got this too but it's gone by using another flashtool version and trying to hit upgrade firmwork instead of Download
solution
scan4u said:
Hi, guys!
I have a problem with SP Flash Tool. I'm trying to install CWM Recovery into Fly IQ444 Quatro (it is the same, as Gionee Dream D1/GN878), using this manual
After starting of flashing i got this:
What does it mean? What can I do to solve this issue?
Click to expand...
Click to collapse
solution.... 1)download all the files drom the link below
https://www.facebook.com/l.php?u=ht...tsuV2-cHhqSzdqTmEtYkU&usp=sharing&h=4AQHo6U2x
2) now unrar it to extract it
3) open sp flash tool recommended version from http://androidxda.com/smart-phone-flash-tool
4) now open it and chose the scatter file from rom folder that you extracted before
5) now from left choose firmware update option rather than download
6)now press download button on the top
7) final and very important thing plug your phone( with battery ) to the usb cable nd ur r gud to go
8) let the bar complete changing colour from red to blue to violet to yellow and u will see a green circle at the end
thats all njoy your stock rom again :highfive::good::victory:
---------- Post added at 06:09 AM ---------- Previous post was at 06:04 AM ----------
scan4u said:
Hi, guys!
I have a problem with SP Flash Tool. I'm trying to install CWM Recovery into Fly IQ444 Quatro (it is the same, as Gionee Dream D1/GN878), using this manual
After starting of flashing i got this:
What does it mean? What can I do to solve this issue?
Click to expand...
Click to collapse
solution.... 1)download all the files drom the link below
https://www.facebook.com/l.php?u=ht...tsuV2-cHhqSzdqTmEtYkU&usp=sharing&h=4AQHo6U2x
2) now unrar it to extract it
3) open sp flash tool recommended version from http://androidxda.com/smart-phone-flash-tool
4) now open it and chose the scatter file from rom folder that you extracted before
5) now from left choose firmware update option rather than download
6)now press download button on the top
7) final and very important thing plug your phone( with battery ) to the usb cable nd ur r gud to go
8) let the bar complete changing colour from red to blue to violet to yellow and u will see a green circle at the end
thats all njoy your stock rom again :highfive::good::victory:
They can help, values must be changed exactly?
Please would be so kind as to tell me I have to change the settings?
Exactly what I have to move
thank you
Hello,
i root my p780, google play service app was not working properly so i download p780 source code and tried to copy paste system all apps then operating system crashed once turn on the mobile only logo stuck bootloader also not coming and Unable to Install Any ROM File on P780 4GB, i tried with SP Flash tool its stuck on searching i installed MTK65xx preloader also same stuck on searching, I visited lenovo service center but service men told he can't install latest update for this mobile. somebody please tell me how can i install the rom file....
vikili said:
Hello,
i root my p780, google play service app was not working properly so i download p780 source code and tried to copy paste system all apps then operating system crashed once turn on the mobile only logo stuck bootloader also not coming and Unable to Install Any ROM File on P780 4GB, i tried with SP Flash tool its stuck on searching i installed MTK65xx preloader also same stuck on searching, I visited lenovo service center but service men told he can't install latest update for this mobile. somebody please tell me how can i install the rom file....
Click to expand...
Click to collapse
What you have to do is to install the drivers and flash any other firmware. Look on my post Rooting tutorial for kitkat, in q&a section.
Pm me if you dont understand something.
Sent from my P780 using XDA-Developers mobile app
stympy said:
What you have to do is to install the drivers and flash any other firmware. Look on my post Rooting tutorial for kitkat, in q&a section.
Pm me if you dont understand something.
Sent from my P780 using XDA-Developers mobile app
Click to expand...
Click to collapse
You are not understanding my problem my phone is dead once turn on its showing only like this below image, so give proper solution.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
vikili said:
You are not understanding my problem my phone is dead once turn on its showing only like this below image, so give proper solution.
Click to expand...
Click to collapse
The proper solution is to reflash your firmware , or if you can enter to recovery is to factory reset!
See what is going on. If you cant enter in to the recovery you must reflash your original firmware.
Tell me if you need to reflash the stock firmware.
How Can i Reflash can you guide me
vikili said:
How Can i Reflash can you guide me
Click to expand...
Click to collapse
Hi.
Read this small tutorial twice.
Here are the drivers: http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605/page12
Look at the bottom of that page.
Install first the exe file, then reboot your PC. WARRNING: you must have Win.XP or Win.7 installed.
Download stock firmware from here: http://forum.xda-developers.com/lenovo-p780/development/p780-stock-rom-links-t2842399
After flash you will have firmware: ROW S124 JellyBean. If you want KitKat you must do OTA Updates or download those packs and install them from your phone by turn. OTA is my advice till S228. S2287 is the lates and last official updates.
Download SP Flash Tools from here: https://drive.google.com/folderview?id=0B_B98oK4DpK1S1l2bXRkTGxhVFk&usp=sharing
Unzip all to separare folders.
Next step is: Power down your phone.
Open device manager.
Plug the usb cable to your phone and to the PC.
In the device manager you will si first MTK65XX... device detected and after this drivers should install.
After drivers are installed disconnect the phone.
Now open spflash tool v5
Load scater file from the folder of the firmware.
In the download tab not button select firmware upgrade - nothing else.
Now press download button and plug the usb cable to your phone.
Flashing should start.
After flash one green circle with ok should appear.
After this remove the usb cable and start your phone.
If your phone is not starting you must repeat the procedure with the new preloader.
Look on your phone box and see if your phone is made after 03.2014.
If it is you must replace curent preloader with new one.
Link to new preloader: https://drive.google.com/folderview...VQ3pJeG9vTlh4Y3pMUG9ES3FtX21ZdjlwVzY3VWc#list
Use only that preloader.
Good Luck. :good:
why that Sp Flash Tool Stuck on Searching
vikili said:
why that Sp Flash Tool Stuck on Searching
Click to expand...
Click to collapse
Could be drivers or... you must reset the phone right before usb cable is inserted.
I got my redmi note 4 from geekbuying in india ..
phone crashing and hanging at random time or situation ..
i also try to install different rom but its not letting install rom device getting dead suggest me ( give Link ) of proper rom i want to use miui rom please fix or give me solution for it .. :good::good: :fingers-crossed:
i think redmi note 4 in india is only available at flipkart.and from what you are saying it seems that you are using unofficial rom. tell your exact miui version.
[email protected]!$h said:
i think redmi note 4 in india is only available at flipkart.and from what you are saying it seems that you are using unofficial rom. tell your exact miui version.
Click to expand...
Click to collapse
I got this device from Geekbuying .
Look other details in images
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
greenlight093 said:
I got this device from Geekbuying .
Look other details in images
Click to expand...
Click to collapse
That's a vendor/fake/tampered/ unofficial ROM.
You need to flash the official one.
Find the official fastboot rom here
http://en.miui.com/a-234.html
Here's how to flash: (it will user ERASE DATA so backup)
http://en.miui.com/thread-370620-1-1.html
which version i should download form that list ? can u give me name of suitable one !
I flashed/installed rom zip file using recovery method. and its giving eroor Updater process ended with ERROR 7 at last what to do ignore it ?
greenlight093 said:
I flashed/installed rom zip file using recovery method. and its giving eroor Updater process ended with ERROR 7 at last what to do ignore it ?
Click to expand...
Click to collapse
To make it clear.
The link i gave you was fastboot ROMs.
RN4 MTK (nikel):
http://update.miui.com/updates/v1/fullromdownload.php?d=nikel_global&b=F&r=global&n=
Since you're using the fake rom, its recommended to use the fastboot method through MiFlash in PC.
To replace the fake with original one.
Check the link for the procedure.
http://en.miui.com/thread-370620-1-1.html
greenlight093 said:
which version i should download form that list ? can u give me name of suitable one !
Click to expand...
Click to collapse
Your device is MBF so it has MediaTek chipset. You should download the following:
Redmi Note 4 MTK Latest Global Stable Version Fastboot File Download
And you must use Mi Flash to flash the zip files in that list (those are fastboot images).
If you want to flash via recovery, you must use this zip file, but as GabrielScott said just above, it's better to use Mi Flash.
Trying Redmi Note 4 MTK Latest Global Stable Version Fastboot File Download flashing by miflash tool and replying if i get restart problem or any app crashing error.. thank for your reply.
In tutorial images . its taken 1800sec for complete and my just finished flashing in 192s ..
after flash Redmi Note 4 MTK Latest Global Stable Version Fastboot File Download using mi-flash tool my device got crashed and and restarted 3-4 time only in starting setup selecting region time - and sim selection time keyboard selection time and more .
greenlight093 said:
after flash Redmi Note 4 MTK Latest Global Stable Version Fastboot File Download using mi-flash tool my device got crashed and and restarted 3-4 time only in starting setup selecting region time - and sim selection time keyboard selection time and more .
Click to expand...
Click to collapse
can you again post your exact miui version.
i tried too many successfully installation and almost all rom and official versions of it ..
i think its motherboard issue .... currently i using new released miui 9 version and its running without crashing just phone restarting anytime..
how do you tell if it is a fake rom?
I tried to flash Lenovo Tab 3 730x.this device is currently in a bricked stage.messed up i guess.what i did was through sp flash tool i formatted the flash (probably including boot loader).now shows only charging signal.when connected to windows its showing mtk usb port via UsbDview.I successfully installed usb vcom driver.i have the rom file and flash tool.but SP flash tool giving an error .error msg is S_SECURITY_SLA FAIL (6004), MSP ERROE(NOT ERROR) CODE 0x00.please help.thanks in advance:crying:
Hi,
me too, exactly the same problem
I`ve got unlock bootloader, and from TWRP I stupid idiot write the system part...
Now any of version SP Flash cannot connect to my tab. I try 3 comps with diferrent ver of Win...
Ones (I dont know why) flash dones successfull...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But its not good finish for me, its the same state, right now. :crying:
Somebody of masters help as, please?
Krabat.
krabat said:
Hi,
me too, exactly the same problem
I`ve got unlock bootloader, and from TWRP I stupid idiot write the system part...
Now any of version SP Flash cannot connect to my tab. I try 3 comps with diferrent ver of Win...
Ones (I dont know why) flash dones successfull...
But its not good finish for me, its the same state, right now. :crying:
Somebody of masters help as, please?
Krabat.
Click to expand...
Click to collapse
Hey can you give me the link of rom file, sp flash tool and driver ? May be I can give it a try
Hi,
i finally unbrick my tablet!!! after 3 days and night, i dont beleve allready, its posible...
drivers: IMHO it does not matter witch version of drivers you use...
tool: i used SP_Flash_Tool_v5.1552.00_SecureBoot. if flash tool doesn`t start with missing MSVCR100.dll, try use another comp (my notebook Win7x64 = 6004 error, PC Win7x86 = red line to 100% > 2004 or 2005 error). Must use MKT_AllinOne_DA.bin and auth_sv5.auth, tablet without battery, no any vol+/- button hold, just start download in serurity mode and plug microusb to tablet.
stock: TB3-730X_S038_170627_ROW. i tried TB3-730X_S033_160707_ROW, TB3-730X_S037_161228_ROW but TB3-730X_S038_170627_ROW roms flash finish successfull.
links:
rom, stock, drivers: https://cloud.mail.ru/public/4bXW/WHjeWWTPG
Happy Krabat.
krabat said:
Hi,
i finally unbrick my tablet!!! after 3 days and night, i dont beleve allready, its posible...
drivers: IMHO it does not matter witch version of drivers you use...
tool: i used SP_Flash_Tool_v5.1552.00_SecureBoot. if flash tool doesn`t start with missing MSVCR100.dll, try use another comp (my notebook Win7x64 = 6004 error, PC Win7x86 = red line to 100% > 2004 or 2005 error). Must use MKT_AllinOne_DA.bin and auth_sv5.auth, tablet without battery, no any vol+/- button hold, just start download in serurity mode and plug microusb to tablet.
stock: TB3-730X_S038_170627_ROW. i tried TB3-730X_S033_160707_ROW, TB3-730X_S037_161228_ROW but TB3-730X_S038_170627_ROW roms flash finish successfull.
links:
rom, stock, drivers: https://cloud.mail.ru/public/4bXW/WHjeWWTPG
Happy Krabat.
Click to expand...
Click to collapse
what is IMHO drivers? still in bricked state..please help
tomas11111 said:
what is IMHO drivers? still in bricked state..please help
Click to expand...
Click to collapse
How can I use auth.5 file with this sp tool version? There is no option for selecting the auth file. Please help
How can I enable security mode of sp flash tool
tomas11111 said:
what is IMHO drivers? still in bricked state..please help
Click to expand...
Click to collapse
Hi,
I`m so sorry for my late answear.
Do You still in hell with your Lenovo?
Krabat.
krabat said:
Hi,
i finally unbrick my tablet!!! after 3 days and night, i dont beleve allready, its posible...
drivers: IMHO it does not matter witch version of drivers you use...
tool: i used SP_Flash_Tool_v5.1552.00_SecureBoot. if flash tool doesn`t start with missing MSVCR100.dll, try use another comp (my notebook Win7x64 = 6004 error, PC Win7x86 = red line to 100% > 2004 or 2005 error). Must use MKT_AllinOne_DA.bin and auth_sv5.auth, tablet without battery, no any vol+/- button hold, just start download in serurity mode and plug microusb to tablet.
stock: TB3-730X_S038_170627_ROW. i tried TB3-730X_S033_160707_ROW, TB3-730X_S037_161228_ROW but TB3-730X_S038_170627_ROW roms flash finish successfull.
links:
rom, stock, drivers: https://cloud.mail.ru/public/4bXW/WHjeWWTPG
Happy Krabat.
Click to expand...
Click to collapse
Hi,
I think I have the same Problem and the link is broken, can you provide me the files? Thank you
Julian
Dears, please I need the stock firmware for "Archos Diamond S".
I looked everywhere online but could only find for other Archos models. I need the one which can be flashed via SP Flash tool (Archos phones have MTK chip).
Thanks.
Wrong area to ask this
here it is https://easy-firmware.com/tags/downloads/ARCHOS+Diamond+S+Firmware
BK☑️ said:
Wrong area to ask this
here it is https://easy-firmware.com/tags/downloads/ARCHOS+Diamond+S+Firmware
Click to expand...
Click to collapse
ok thanks, but easy-firmware.com isn't free. I won't let me download if I don't subscribe.
Regards,
Wael
waelh said:
ok thanks, but easy-firmware.com isn't free. I won't let me download if I don't subscribe.
Regards,
Wael
Click to expand...
Click to collapse
its the only one available , tell me your CPU , is it MT6753?
BK☑️ said:
its the only one available , tell me your CPU , is it MT6753?
Click to expand...
Click to collapse
yes, it is MT6753.
The model number of the phone is: AC50DIS
waelh said:
yes, it is MT6753.
The model number of the phone is: AC50DIS
Click to expand...
Click to collapse
http://update.archos.com/AFMv2/downloads/ac50dis/20160122.173634/update.zip
edit 2 the link is down , you cant fix your device.
try here : https://superuser.phh.me/stable/archos/ac50dis/20160122.173634/
http://upfirmware.com/download/archos-diamond-s-ac50dis
BK☑️ said:
http://update.archos.com/AFMv2/downloads/ac50dis/20160122.173634/update.zip
edit 2 the link is down , you cant fix your device.
Click to expand...
Click to collapse
Dear,
I already downloaded this same update.zip before but the thing is this is not flashable via SP Flasher (means it doesn't have a scatter file) but it can only be flashed using a custom recovery or by Fastboot. The reason i need an SP Flasher compatible firmware is because the phone is totally bricked and i have no access to the recovery or bootloader mode. The only detectable way for this phone on a computer is using the "preloader" mode of MTK. That's why i am looking for SP Flasher compatible version.
waelh said:
Dear,
I already downloaded this same update.zip before but the thing is this is not flashable via SP Flasher (means it doesn't have a scatter file) but it can only be flashed using a custom recovery or by Fastboot. The reason i need an SP Flasher compatible firmware is because the phone is totally bricked and i have no access to the recovery or bootloader mode. The only detectable way for this phone on a computer is using the "preloader" mode of MTK. That's why i am looking for SP Flasher compatible version.
Click to expand...
Click to collapse
i cant really help you on this , all the links ever available are downs , this phone is from 2015 , buy a new one
BK☑️ said:
i cant really help you on this , all the links ever available are downs , this phone is from 2015 , buy a new one
Click to expand...
Click to collapse
yes true everything is down. Bur i really thank your effort.v
waelh said:
yes true everything is down. Bur i really thank your effort.v
Click to expand...
Click to collapse
actually you can download the zip from this link , give it a try http://archoslounge.jbmm.fr/showthr...r-le-logo-Archos-après-un-wipe-cache&p=404504
there is even a scatter file ur saved !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
waelh said:
yes true everything is down. Bur i really thank your effort.v
Click to expand...
Click to collapse
use the thanks button if it helped you
BK☑️ said:
actually you can download the zip from this link , give it a try http://archoslounge.jbmm.fr/showthr...r-le-logo-Archos-après-un-wipe-cache&p=404504
there is even a scatter file ur saved !
Click to expand...
Click to collapse
Dear,
It's true that there is a scatter file in there, but it's just in a totally different format that the that's accepted by SP-Flasher... I even tried to get the entries from the included scatter and tried to import them to some SP-Flasher dummy scatter template... but the template has a lot more lines than the one included in that zip..... too bad that Archos stopped supporting their devices...
only if i could get someone to download the perfect file which is available at the below link:
https://easy-firmware.com/index.php?a=downloads&b=file&id=139432