hello
these are board details for my tablet
ticket: 9011-24t120-50401011
chip: rk3066 angc 162 1309
board: tr102_main_pcb_v11 2012_09_18 gou
ic: rk903 tod2002 1310
touch flate: tr101_lcd_fb8 2012_07_05 gou
ic 2: toshipa ll0352 taiwan 1250 9ae th58teg7dcjta20
normal specs
b-smart bs101 10.1" 1280*800
cbu 1.6 dual core
ram 1g
internal memory 1g nand flash 16g
i tried to find it's rom but couldn't find it then i managed to flash cube 30 gt rom on it and the tablet opened the home screen rom but toush was not working however if i connected mouse to the tablet with otg it worked but i found that wireless is not working so as the Bluetooth beside i tried to transfer apps by ext memory card and install it but it gives me error message i checked the install from unknown sourses but no luck.
i will try what ever it takes to solve my 7 month tab problem i don't know which is better ,trying to solve problems on this working rom or installing another one . this the first time i put board specs for my tablet i hope this make different .
any suggestions
this how my original rom look like before changing my rom because of the virus that hit it
https://youtu.be/hC-Km8pdOf8
waiting
waiting
Related
Hi to all
I have a tab with following specs
TCC8803 800mhz, 256ram, 4gb intern SD, display 7" 800x480 capacitive, HDMI, rtl8188cus wifi, no 3g. no bluetooth, no gps, support extern SD -32gb,
support extern keyb thru USB-OTG.
tab was rooted worked ok till tried to put Linux through Internet. Was downloading packages and then wifi lost connection.
ever since the chip warm-up ( opened tab and felt it ! ) but no display or sound at all !! I think i left it on debug mode in order to have
external keyboard work.
windows 7 will see it as 'unknown/ unrecognized' device, i forced ADB drivers to it, I get Android phone but also 'device cannot start.
Tried to conx with TV via HDMI but nothing there too.
I went through many forums, potential solutions but cant find anything applicable to my problem. Tried to format a 4gb SD with sardu
tested ok with quemu but nothing on the tab. no lights, no sound, silence of death !!! FYI no power led on this 150 euro device.
have saved some system files if someone wants me to upload.
So decided to ask for help / ideas in this forum.
thanks in adv
ps : android 2.3.1 gingerb, rooted w superclick 2.3.3.
anybody could help please ?
Hi, all I'm new in this forum and I have some problems with my Android mobile phone. Well, my device is a "CHINESE" Android Phone (f*ck!):crying: and for this reason I can't root my device noway. Some weeks ago I connected in debbuging mode my Android to PC using an Universal Android Driver (Universal ADB), well up here. I opened the software Unlockroot (Free) and the software detected at the first my sh*t device. I just clicked in the button: ROOT in the middle of the screen. It begun to work and the line was loading very quicly. Later my phone was restarted and I had just a ROOT device. The reason for I wanted (and I still want) is because my mobile phone only has 200MB for apps and use 100MB for system and others, I tryed deleting davilk-cache, data, others systems files....but when I installed around 5 apps the memory was full and I think: WTF? WTF?...well I see some tutorials about how to win memory, splitting my SD Card, putting one partiton in EXT2 format for Apps and another for Files in FAT32 format. So, it was going so well. I installed the app SD2link and I link all the apps with SD2link...So, I thought: Good, very good, my little friend. But the problems had started. I notice, when I installed a random app from Google Play Store the phone was restared alone, without touching anything. Also it did the same when I wanted to open a installed random app.After a few days the screen rotation stopped working and when I opened an app the devices was restarted like a brick. However, I could fix with a factory wype or factory reset. I never thought that I was a cause of rooting my device...for this reason I unrooted and I went to the shop for change my device and they changed my device for another (new). Later with the new phone in my hand I rooted again with Unlockroot and I had the same problems, so I unroot the new device and I found info about root any android phone with just a click. I found SuperOneClick and that was the worst choice in my life. When the software finished I tryed to turn on my device...I couldn't because it was bricked and I was very nervous, because I had and Math exam and I had in the device my calculator (MathStep XD)...I couldn't turn on, and neither flash the device. The next day I going to special shop technical and then They fix my phone (I don't know how, but now goes well) and now my question:
I tried with all methods to be root: specials for chineses androids, universal root method, SuperOneClick (brick), Unlockroot (free and Pro ver.), Bin4ary Scripts, and others softwares, even manually ROOT with SDK and ADB, but any of these methods goes in my phone. CAN I ROOT MY DEVICE? HOW? Also I need say that I can't do any udapte from SDCard, I can't install anything from Recovery it says: Error. E: failed mount.... and then Installation Aborted. I can't installed Clockwork Mod for Root method too... so now: :crying: :crying: :crying: :crying: :crying: :crying:
My Device:
Features I-Joy i-Call 300 Dual Red RoyaltyDisplay 3.5 "
1GHz Processor
Dual sim card
Bluetooth
3G Connection
Camera 5 Megapixel
Includes 4GB Micro SD
free Phone
Specifications.
Display:
TFT capacitive touch screen 3.5 "
Resolution 320 * 480 px
Multitouch 5 points
CPU:
Processor: MTK6575-M ARM Cortex A9 1GHz
GPU Power VR SGX531
Memory RAM / FLASH: DDR3 512 MB / 512MB
+ 4GB Micro SD Card
Android OS 4.0.4
G-sensor
Connectivity:
Wi-Fi 802.11 b / g / n
2G Network (MHz): GSM 850/900/1800/1900 MHz
3G WCDMA Network (MHz): 850/1900, 900/2100 MHz
Bluetooth
GPS + AGPS (30min or more to find GPS, and later it disconnect very quickly)
Other Features:
Dual sim card
Li-ion Battery: 3.7V 1500mAh
FM Radio
0.3 Megapixel Front Webcam
Back camera 5Mpx FLASH (FAKE, SUPERFAKE, lol)
Micro USB
Micro SD (up to 32GB)
Headphone mini jack 3.5 mm
Dimensions / weight: 119 x 62 x 13.5 mm / 119 g
SORRY FOR MY BAD ENGLISH I TRY TO DO THE BEST...AND SORRY TOO FOR THE BIG STORY OF MY LIFE. THANKS FOR HELPME. REGARDS EVERYONE.
Have you tried a program named MTK Droid Root&Tools?
root chinese android
RoberGalarga said:
Have you tried a program named MTK Droid Root&Tools?
Click to expand...
Click to collapse
I'm not sure, man. Probably, but I going now to test it. Another thing that I said that later of the brick the phone isnt' the same than before. Also I'm not sure if it is a problem of the little pc of my father (A sh*it of PC: Acer Aspire One) or is cause of mobile phone, because my device connected and discconected alone from USB port every 5seg. or not connect nothing.
Sorry again for my bad english. I'm studying english but in Spain...You can't wait so much.
Thank, bro.
RoberGalarga said:
Have you tried a program named MTK Droid Root&Tools?
Click to expand...
Click to collapse
Now I see the software and I didn't test it never, so I going to test in few hours...when I can, now I can,t because I go to my apartment in the beach. Thanks so much, thanks so much, thnaks so much XD
PS: When I will test I will comment you if this software goes well or I will have a brick...Thanks again.
Hi All,
Good day to all. I'm new in this site and i really need help from anyone. It's just that i flashed my Cube U9GT tablet with U9GT2 firmware. I used RKBatchTool_1.5 software to flash my device. After flashing, i can only see white screen that keeps turning on everytime i try to reboot. It can still detect by my laptop thats why i'm not yet worried much. For now all i can think is to have a copy of Original or Custom firmware for my U9GT tablet so that i can flash it again with the correct firmware.
If anyone have a copy of working firmware for my tablet, kindly please help by giving me a working link where i can download it. I already browse google but unfortunately until now i can't find any.
I'm hoping for your favorable response with my concern. Thanks a lot in advance.
By the way, below is the specs of my tablet.
Screen:7" 4:3 TFT capacitance multi-touch screen with resolution 800*600
CPU:Rockchip 2918,1.2GHZ Cortex A8
OS:Android 2.3,more than 100,000 software are available online
RAMDRII 512MB
Storage:Built-in 2GB-16GB,TF card extended 128MB-16GB
Internet Access: "Wifi 802.11b/g Max54Mbps,3G module dongle"
support OpenGL ES 2.0 and Open VG
Video:support 1080P encoding for H.264,VP8,RV,WMV,AVS,H.263,MPEG4 format
Support YouTube,HTML5 and Flash10.1
Audio:support MP3,WMA,APE,FLAC,RA，AAC,OGG，WAV format
Image:support JPG,BMP,PNG format
E-book: support TXT,LRC,PDF,Html,Htm,EPUB,PDB,FB2 format
Playback time:up to 5 hours movie playback time,up to 15 hours music playback time,
up to 7 hours web page view time
Multi language,record function,G-sensor and keyboard supported
Battery Capacity:4250mAh
Product Dimension(mm):182*144*7
Hello Member,
As i know i am very new to this forum.....
But I am a regular reader of this forum.
I need help about my China Tablet which is 9.7 inch dont know of which brand and on tabet there is no name of tablet mentioned on device/Box.
Few month ago the device was running on android 4.0.4... i think it was raw android... 1 month ago i read a article on XDA For cynogen 9 for china/All winner Tablet... So i downloaded and installed through sd card... but when my tablet restarted it shows a message...
" Encryption Unsuccessful " and it is showing a reset tablet button in bottom when i touched on it nothing happen..... Dont know why the touch is not working, So i attached a keyboard but nothing happen when i clicked on the button....
So after i tried many times to install different-different custom Rom by sd card. But each and every time it says.. " E: Signature Varification Failed"
Here Are The specification Of tablet..
OS- Android 4.0 Was installed But Currently It is Having Cynogen 9 (Not Working)
CPU- ARM Cortex-A8 1GHz
RAM- 1GB
ROM- 16GB
LCD- 9.7 INCH
TOUCH PANNEL- CAPACTIVE
2D/3D- AMD Granphic Accleration, Full Support
GRAPHIC- OpenGL ES2.0(AMD Z340) and Open VG1.1(AMD Z160)@27M Tri/sec
WIFI Wireless- Support 802.11b/g/n standarD, highest transmission get to 300Mbps, support local WAPI wireless protocol standard..
I Am Having Some ROM,CWM.. Pics Are Attached....
1- Start Screen-1
2- Start Screen-2
3- Start Screen-3
4- Error Message
5- Error While Installing Rom From Sd Card
6- All Android Developer Software
7- Custom Rom List
8- Cmw
Plz Help Me To Reacces My Tablet...
I will Be Very Thank Full To All Of You.......
THNX
Aditional Information.......
Bro.... one thing more when i want to tell when i connect the device to pc.... it identify and install the drivers via internet... but not read the internal storage..... But in new it was working fine.....
Thank YoU
Thread closed as a duplicate...please use this thread for any future discussions.
Hi,I own a Reliance RPTPE0706 A 7inch tablet,from yesterday a part a of my screen is not working a rectangular chunk of my screen,unfortunately that's the place where I would use normally its in the middle.I remember dropping it but not so bad,can you tell me anyways to deal with it.The phone service guy says to replace the screen itself
Please guide me a way out of this problem,any solution.
I think installing me a ner rom might work so tell me,How to install Cynogenmod on a Reliance tablet(That's a local brand)
I have a link to the Tablet's specs ( http://www.reliancedigital.in/reconnect-rptpe0706-tablet-8-gb.html )
OR [AS MENTIONED BELOW]
Brand:Reconnect
Model:RPTPE0706
Tablet Type: Slate
DISPLAY:-
Screen SizeDiagonal) 7 inch (17.8cm)
Screen Resolution:1024 x 600
PHYSICAL DIMENSION:-
Width:108 mm
Length:188 mm
Height (Thickness):9.2 mm
Weight:280 gm
Colour:White (front side), White and Silver (back side)
PLATFORM:-
Operating System:Android 4.2.2 v(Jelly Bean)
HARDWARE:-
SIM Typeual SIM
Processor:1.2 GHz Cortex A7 Quad Core
Memory TechnologyDR3
Memory (RAM):1 GB
Storage Type:microSD
Internal Storage:8 GB
Expandable Memory:32 GB
POWER CONSUMPTION :-
Battery Type Lithium-polymer
Battery Capacity:3000 mAH
BUILT-IN-DEVICES:-
Primary Camera:5 MP
Secondary Camera:0.3 MP
Microphone:Yes
I am also having the same issue for somedays maybe,the hard reset will work for you.
If you want a Rom for your Relience Reconnect RPTPE0706 then ask me i will put that int his thread.............I have its nandroid backup of android 4.2.2 (jb)and 4.4.2(kk).............So if u need just inform.........