I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Turn off the phone --> Run minimal ABD and fastboot as admin--> just write the command for recovery install (don't hit enter yet)--> press volume + and volume - button and connect the phone to pc via usb--> now hit enter and voila. Your phone will boot in recovery.
Click to expand...
Click to collapse
Good luck!
anyone?
f4780y said:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Good luck!
Click to expand...
Click to collapse
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
hientran41 said:
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
Click to expand...
Click to collapse
OK, but did you look at the second link there, to the specific post in that thread? It suggests a process for locked bootloader, which is why I thought it might help...
Anyhoo, I hope you manage to get it fixed somehow!
Is anybody have the droidboot.img file from the VibeZ K910 dualsim, pls upload it for me. i cannot find it anywhere.
I look into the second link as well. that method for user have a working phone but locked bootloader and want to downgrade.
Ah, OK. Sorry I couldn't help.
u fix your phone?
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
hi do u fix your phone?
Geguniukas said:
hi do u fix your phone?
Click to expand...
Click to collapse
i bricked also
dunno what to do..
---------- Post added at 12:13 AM ---------- Previous post was at 12:13 AM ----------
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
did you fixed the phone?
lenovo k910e 4.2.2 bricked after TWRP for 4.4.2 installation
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Solution ( k910 bricked )
Ok here is the solution even if your device ( k910 dual sim ) is completely bricked as was mine.
I was stuck in Lenovo logo with no success in finding right and working drivers ( windows 7 64x ) and i was not able to to get in recovery official ...everything was just - somehow - deleted...
I had locked bootloader **** and was not be able to flash cmw in working mode ****
There was nothing for me that could recover my phone even if the "hard" way with QPST or miflash etc
So....after 3 days....find this solution and hope this will help you because it is soooooooooo easy finally!
Steps:
1) Download lenovo driver ( i think it is useless in fact but ok....just run it you dont have anything more to loose )
https://www.dropbox.com/s/frbpz16udrefoit/LenovoUsbDriver_autorun_1.0.112.exe?dl=0
2a) Download and install Minimal adb
https://www.dropbox.com/s/uvngsu4vz4hvsky/minimal_adb_fastboot_v1.1.3_setup.exe?dl=0
So now you have to use the right recovery image ( this file has to be inside minimal adb folder )....so here it is:
https://www.dropbox.com/s/ge05m1fe8n4qgb1/recovery.img?dl=0
2b)
Download this ROM ( this worked for me - with other i did try i did get an error )
http://www.needrom.com/download/lenovo-k910-vibeui-2-0/
prefer the last updated version ( 1501 )
Put this rom in the same ADB folder and renale zip in VIBE1411.ZIP ( in order to be easier later )
3) Turn off the device open Adb and write : fastboot boot recovery.img ( to have it ready )
4) Push volume + $ volume - at the same time and AFTER connect with usb to your pc - At the time the device will vibrate HIT ENTER in ADB
This will flash the recovery and after 1 minute device will open in a recovery screen with an adb update option ***
SELECT THIS adb update OPTION !
Your device kow it is ready to flash the new rom ! ( you will realize that everything is right from many usb beeps you will hear )
5)In adb console write : adb sideload VIBE1411.ZIP
This will take a little ....after that your device will reboot ! Dont panic if for a few minutes it will stuck in lenovo logo....
IT IS NORMAL AND YOU HAVE TO WAIT!
Hope this will help you.....please feel free to tell me if this worked for you.
C u
Same thing happens to my lenovo vibe z k910
buzzbuzz1 said:
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Click to expand...
Click to collapse
After running twrp recovery it operates 3-4 times but now it flashes on twrp screen and screen goes blank and again flashes . I am unable to on it and as it shows only light and lenovo logo after that blank screen . Please help me in this. Its only detecting in adb recovery not any other mode.
lenove vibe Z k910 locked and stuck in logo
hello all
I ve done every word and many other tutorials but still the problem the same:
adb devices give just nothing
but fastboot devices gives the device
the driver is installed correctly detected in devices of the computer
here is the response for :fastboot boot recovery.img:
~/Desktop/lenovo]$ fastboot boot recovery.img (master✱)
< waiting for device >
downloading 'boot.img'...
OKAY [ 0.536s]
booting...
FAILED (remote: Locked)
finished. total time: 0.538s
thanks for everyone to help
Boot into recovery under bricked condition
Today I bricked K910 after reinstalling GMS apk.
The phone hanged at boot logo.
Nothing can be from here.
I decided to take this risk.
I removed the back cover and disconnected the battery terminal.
After that I plugged back the terminal.
Several tries by power button and volume down to get into the recovery mode. All failed.
Each time it hanged at boot logo.
I have to redo the battery terminal unplug sequence again.
This is correct method to get into recovery mode.
Press power button and volume down till the Lenovo logo appears.
Move the power button finger to the position of the " Home " of the touchscreen position.
Hold till the recovery menu appears. Choose factory reset to erase the phone.
There was two lit small icon below. Make your choice.
The phone will be erased by reset.
Reboot after the process.
I solved my phone bricked problem.
Hope the method will solve your problem.
Good day to all K910 users.
my vibe z cannot access the recovery mode (PWR + VLM DOWN), it only vibrate. If turn on only stuck at Logo. Please help .
How to root Micromax Unite A092 And please post cwm recovery for this phone
yes i need help on this same post plz somebody help in rooting micromax unite a092
i think Vroot will work for you !
Hy ! I think that micromax a092 unite is sold in my country as allview a6 quad ( specs here ) and rooted whit Vroot from mgyun but there is a catch : many says that vroot is a virus -- info on xda forum--. I don't know how to prove that so use it at your own risk !!!!!!
After i found that i tried to get rid of vroot by using this method described here http://forum.xda-developers.com/showthread.php?t=2434453 and it worked for me :good: !
Now i have a rooted phone and hopefully virus free !
P.S Sorry for my english !
diaconu.silviu said:
Hy ! I think that micromax a092 unite is sold in my country as allview a6 quad ( specs here ) and rooted whit Vroot from mgyun but there is a catch : many says that vroot is a virus -- info on xda forum--. I don't know how to prove that so use it at your own risk !!!!!!
After i found that i tried to get rid of vroot by using this method described here http://forum.xda-developers.com/showthread.php?t=2434453 and it worked for me :good: !
Now i have a rooted phone and hopefully virus free !
P.S Sorry for my english !
Click to expand...
Click to collapse
Just as I was about start a new thread asking for help rooting this damn thing after hours of frustration, the search for similar threads option in the title box sent me here. Man I can't thank you enough! mulțumesc! :good:
Who knew a random Chinese rooting app would succeed where just about everything else failed. Installed it, rebooted, installed SuperSU...victory. Again thanks a bunch.
Oh btw like the OP mentioned, any idea which CWM works for this phone and a flash tool to get the job done? This phone doesn't seem to have proper drivers like the ones say Sony PC Companion would install which gets Device Manager to recognize the phone as say "Micromax A092" or something like that and not just as Android ADB Interface under Android Devices. This might be the reason why adb/fastboot doesn't detect the phone when connected in fastboot mode. Any further help truly appreciated too.
PS: OP/second poster, if you are still looking for a way to root your phones, there's a English version of Vroot to simplify things further..not that the Chinese version was much trouble to begin with. You are probably gonna end up installing SuperSU afterwards anyways. Please update this thread if you find a CWM compatible with this phone and a tool to proceed with the flashing.
Tried all things but no success
I used many softwares like oneclickroot, unlockroot. Unlockroot pro but it still not rooted then i try manual rooting with adb but any exploit and any file not pushing to data/local/tmp it gives an error read only file system pls help
I'm glad I could help ! On my phone debug mode enabled , without battery , hold Volume Down and then insert USB cable enters in fastboot mode ! For flasing original software micromax a092 use a " 8x10_fastboot_all_images.bat " file whitch looks like this : @ECHO off
adb reboot bootloader
echo for not erase modemst1 and modest2
rem fastboot flash partition gpt_both0.bin
fastboot flash aboot emmc_appsboot.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash tz tz.mbn
fastboot flash rpm rpm.mbn
fastboot flash sdi sdi.mbn
rem fastboot flash fsg fs_image.tar.gz.mbn.img
rem fastboot flash modemst1 dummy.bin
rem fastboot flash modemst2 dummy.bin
fastboot flash modem NON-HLOS.bin
echo for not erase bt and wifi information
rem fastboot flash persist persist.img
fastboot flash cache cache.img
fastboot flash usbmsc usbdisk.img
fastboot erase splash
fastboot flash splash splash.img
fastboot -S 256M flash system system.img
fastboot flash recovery recovery.img
fastboot -S 256M flash userdata userdata.img
fastboot flash boot boot.img
fastboot reboot
With debug on and only charging mode enabled in Device Manager appears as Android Composite ADB Interface , olso in fastboot mode !
Here is everything that i found about A092 Unite
Rickydhillon said:
I used many softwares like oneclickroot, unlockroot. Unlockroot pro but it still not rooted then i try manual rooting with adb but any exploit and any file not pushing to data/local/tmp it gives an error read only file system pls help
Click to expand...
Click to collapse
Dude read my previous post will you? It was meant for you. Use Vroot. Its what worked for diaconu.silviu and its what's rooted my A092. If the Chinese version is a tad confusing, just download the English version and get rooting.
diaconu.silviu said:
I'm glad I could help ! On my phone debug mode enabled , without battery , hold Volume Down and then insert USB cable enters in fastboot mode ! For flasing original software micromax a092 use a " 8x10_fastboot_all_images.bat " file whitch looks like this : @ECHO off
adb reboot bootloader
echo for not erase modemst1 and modest2
rem fastboot flash partition gpt_both0.bin
fastboot flash aboot emmc_appsboot.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash tz tz.mbn
fastboot flash rpm rpm.mbn
fastboot flash sdi sdi.mbn
rem fastboot flash fsg fs_image.tar.gz.mbn.img
rem fastboot flash modemst1 dummy.bin
rem fastboot flash modemst2 dummy.bin
fastboot flash modem NON-HLOS.bin
echo for not erase bt and wifi information
rem fastboot flash persist persist.img
fastboot flash cache cache.img
fastboot flash usbmsc usbdisk.img
fastboot erase splash
fastboot flash splash splash.img
fastboot -S 256M flash system system.img
fastboot flash recovery recovery.img
fastboot -S 256M flash userdata userdata.img
fastboot flash boot boot.img
fastboot reboot
With debug on and only charging mode enabled in Device Manager appears as Android Composite ADB Interface , olso in fastboot mode !
Click to expand...
Click to collapse
Hey man thanks again for the info. I'll look into it and get back to you if I don't understand something.
Wait...hang one...you need to remove the battery to get into fastboot mode?? How's the phone to boot up w/o a battery?
Anyhoo the method mentioned to get my phone into fastboot mode is to press the Volume Down key + the Power button for a while till the Micromax logo pops up and then connect via USB. It just sits there displaying the logo looking like the phone is hung but its apparently supposed to be in fastboot mode.
But you seem my problem is that while the phone is supposedly in fastboot mode, when I open up a command prompt in the adb/fastboot folder and type : fastboot devices, it doesn't detect anything. The phone does show up under Android Devices in Device Manager but fastboot ain't recognizing it.
Does your phone show up in Device Manager as anything other than an Android ADB Interface? Like say your phone model no. or something else. I get the feeling its not being recognized because there are no proper drivers for it.
Also what's the amount of RAM on your phone? 512mb or 1GB? Thanks again man :good:
Unfortunately for me ...only 512MB ! Here is how Device Manager see my phone (debug + charging mode only ) .
-With battery : Vol UP +Power button = standard recovery
-Without battery : Vol Down + Insert USB cable = fastboot mode ( logo Allview on screen...nothing else )
---------- Post added at 03:09 PM ---------- Previous post was at 02:56 PM ----------
Only after i installed moborobo (i don't know why ) i could get a reply from adb devices command (of course android sdk installed ) and i did a phone partition backup !
I am just a newbie in this android stuff ! all that I have achieved is due XDA forum readings ...a lot of reading ! The next step for me is to find a way to CWM
Rickydhillon said:
How to root Micromax Unite A092 And please post cwm recovery for this phone
Click to expand...
Click to collapse
You may use an application called Framaroot which is used to root most of the phones. I don't whether it will root your phone or not, but I successfully rooted 20 phones using it, including->
Micromax A116
Galaxy Tab 2
Galaxy Note 10.1
Galaxy Grand
Galaxy Star Pro
Galaxy Note
Galaxy Note 2
Galaxy Grand 2
& many more...
Vroot not working buddy
I tried but vroot not working i also try manual way pushed many exploit like psneuter, zergrush, rootutility but no success i need a working exploit for 4.3 Jellybean please post one.
diaconu.silviu said:
Unfortunately for me ...only 512MB !
-With battery : Vol UP +Power button = standard recovery
-Without battery : Vol Down + Insert USB cable = fastboot mode ( logo Allview on screen...nothing else )
---------- Post added at 03:09 PM ---------- Previous post was at 02:56 PM ----------
Only after i installed moborobo (i don't know why ) i could get a reply from adb devices command (of course android sdk installed ) and i did a phone partition backup !
I am just a newbie in this android stuff ! all that I have achieved is due XDA forum readings ...a lot of reading ! The next step for me is to find a way to CWM
Click to expand...
Click to collapse
Aaah I think you might have the equivalent of a Micromax Unite Engage A091. Its basically the same phone with half the RAM and memory. Rest of the specs are just about the same. Tell me are you running Jelly Bean 4.3 or Kit Kat 4.4 cause the A091 ships out here with a Kit Kat OS. Maybe that could clear some doubts.
Recovery mode is the same as yours i.e Vol UP + Power Button but I don't understand your description of getting into fastboot mode. How on earth will you get to the logo screen/fastboot if there's no battery in your phone? Still went ahead and tried it...doesn't work for me. The only way I can get into fastboot mode is by pressing the Volume Down + Power buttons and yes like you said it sits at the Micromoax/Allview logo screen but it certainly doesn't show up as Android Composite ADB Interface like in the image you posted...just Android ADB Interface.
Think i'll give this Moborobo a try...maybe it will help me out too.
Not a total newbie as I have rooted/unlocked/flashed/customized a X10 mini pro and a Xperia M but there's just little to no info about this particular phone that I hit a dead end with the rooting process till I happened upon your post and now I have to find a workaround for this fastboot problem. Yeah done a lot...a lot of reading (my bookmarks seem never ending ) on this great site plus many others.
About your CWM installation, why don't you download & install ROM Manager.apk and use that download and install the CWM compatible with your phone? There's no net connection on my phone yet and I haven't got around to reverse tethering my phone so I can use my broadband connection on it so I can't confirm but if I get it done before you, I'll let you know.
---------- Post added at 02:34 PM ---------- Previous post was at 02:20 PM ----------
ProgrammingExpert said:
You may use an application called Framaroot which is used to root most of the phones. I don't whether it will root your phone or not, but I successfully rooted 20 phones using it, including->
Micromax A116
Galaxy Tab 2
Galaxy Note 10.1
Galaxy Grand
Galaxy Star Pro
Galaxy Note
Galaxy Note 2
Galaxy Grand 2
& many more...
Click to expand...
Click to collapse
I tried every and I do mean every version of Framaroot...no dice. The Gandalf exploit that's need to root Qualcomm powered devices just refused to show up for some reason and the strange thing is that 24 hours ago, I had used it (version 1.6.1 I think it was) to root an Xperia M but no matter which version I installed on the A092, all it displayed was the Aragorn exploit which I believe is what is required to root Samsung phones. Also doesn't the Micromax A116 use a MediaTek processor? If I was doing something wrong, do let me know so I can avoid circumvent this situation in the future.
Rickydhillon said:
I tried but vroot not working i also try manual way pushed many exploit like psneuter, zergrush, rootutility but no success i need a working exploit for 4.3 Jellybean please post one.
Click to expand...
Click to collapse
Which version did you use? The Chinese or English one? Because the Chinese one seems to be a newer version if I am not mistaken. I feel your frustration man, I spent an entire night trying to root the damn thing and Vroot was the only thing that worked for me. What operating system are you running? Have you manually installed the Google USB/Micromax drivers?
hey guys thanks i hav successfully rooted my micromax a092 and i m having KingUser as an Super User which works similar but now i need to install CWM recovery.....plz help me with that
I tried chinese version
I used chinese version ir push two apps in phone camera app and one root app i forgot apps name i download english version of vroot tonight i'll give it a try
thanks for reply man
deadhead619 said:
hey guys thanks i hav successfully rooted my micromax a092 and i m having KingUser as an Super User which works similar but now i need to install CWM recovery.....plz help me with that
Click to expand...
Click to collapse
Sorry man...nothing yet. I have been at it for a couple of days but no luck so far. ROM Manager says there's no supported version of CWM and since I haven't been able to get this thing detected in fastboot mode, flashing via command prompt is out of the question. Hope someone else can come to out aid with a working solution. Will update this thread if I manage to flash it.
Pls post the process of rooting
Hey buddy pls post the process to root of this damn phone
i'm searching for a working root process on the google from that day when i purchase this phone but not find any working one
Rickydhillon said:
Hey buddy pls post the process to root of this damn phone
i'm searching for a working root process on the google from that day when i purchase this phone but not find any working one
Click to expand...
Click to collapse
If you are telling me even Vroot didn't work for you, then I am afraid I might be out of suggestions. Did you try Kinguser which worked for the other guy?
Anyhoo unless you tell me exactly what's going wrong for you with Vroot, there's only so much troubleshooting I can do for you. You say its not working for you but you fail to mention which step of the rooting procedure in halting your progress. Basic but essential questions -
Have you switched on USB Debugging mode?
Is Vroot detecting your phone?
Did you follow the link in diaconu.silviu's post, the 3rd post in this thread and follow the exact steps given in that link? Because that's what worked for me.
Also you still haven't answered my question asking you whether you have installed USB drivers or which operating system you are running on your PC. If you are on Win 8, you need to disable driver signature to be able to install the drivers necessary for rooting. Follow this procedure -
https://learn.sparkfun.com/tutorial...abling-signed-driver-enforcement-on-windows-8
After that take a look at this tutorial for driver installation and do exactly what it says in case you haven't done it - http://visualgdb.com/tutorials/android/usbdebug/manualinstall.php
Give more information to people regarding your situation next time...posting a couple of lines saying this app or that ain't working your you isn't gonna help me or anyone else help you.
I used the same way
I used the same way phone conmecting with adb and show up in vroot as A092 When i click on root button it takes 15 To 20 Min. & after that vroot show retry button i tried it many time but no success
Simple Root Micromax A092 Unite..
Dear, For Micromax A092 Simple exploit is there. Just download ROOT GENIUS enable debugging and connect with usb after installation.. install.. enjoy
Downloads:
RootGenius
https://www.dropbox.com/s/omrjip57skzh3g7/RootGenius.exe
Micromax A092 Drivers
http://androidbreak.com/data/MicromaxDriver.zip
Process:
Step 1: Download and install Micromax A092 USB driver on your computer.
Step 2: Enable USB Debugging on your Micromax A092 Smartphone. To enable USB debugging, Open Settings > Developers Option > USB Debugging > Tick to Enable.
(Developers Option is hidden for Android 4.2.2 or above, to show this option Go to Settings > About Phone > Built Number (Tap on it for 5-8 times).
Step 3: Download and Open Root Genius Application on your Windows Computer.
Step 4: Once Root Genius Application is launched, connect your Micromax A092 smartphone to the computer (with USB Debugging enabled).
Step 5: Once Your Micromax A092 is connected successfully to the computer, Root Genius will automatically detect your device.
Step 6: Now, Click on the “Root Now” button to begin the rooting process.
Step 7: Now, Root Genius will automatically “Root” your Micromax A092 and install the KingUser Application.
Step 8: Now your Micromax A092 smartphone is Rooted. To check whether your phone is rooted correctly, open Applications Menu, there you will be able to see a new app installed, called KingUser. If this app exist then it means you have successfully rooted your device.
(Source: http://androidxda.com/root-micromax-canvas-hd-a116)
Sent from my Micromax A116 using XDA Free mobile app
sadisd
I have a Micromax unite a092 too
I rooted my phone with Root genius.exe pctool its very fast only takes about 5 minutes only
Hello guys, there is no specific forum for this device, that is why have started this new thread.
My xolo q500 is bricked. It stucks at the logo and doesn't go further. I was trying to install CWM recovery. But niether CWM nor TWRP not available for my device so i tried to flash CWM of some other device from the rom manager. It was of xolo q700. After flashing my device got shut down but stcuked at the boot logo when restarting.
All i wanted to do is to flash a custom rom. I rooted. I tried to flash it via the default recovery but it was not succesfull i dont know why. I googled and came up to know that i need to install custom recovery like CWM or TWRP to successfully flash custom roms. So when i flashed cwm of xolo q700, this happened....... It was all because of that other device's CWM..... and that recovery.img file was placed in the internal memory. So overall, i flashed it from the internal memory.............
Now my phone niether boots up normally nor boots in the recovery menu. It stucks at the xolo logo. I googled but i found unbricking methods for mediatek devices via sp flash tools but my device has Qualcomm Snapdragon chipset , so that didn't worked. Please help me how can i unbrick my device? Is there any method to unbrick qualcomm based devices?
I had that thought of not installing stuff of another device. But i niether found any custom rom nor recovery for this device. So i decided to just use another device's stuff. Yeah i know that totally crazy idea... but.....whatever when i plug it into PC it does not detect anything but when i plug it in pc after removing battery, its LED starts blinking. When this happened first time... Something like 'Qualcomm msm' was installed but nothing thereafter......
Wassup aliens!
So I got this gionee M3 and I rooted it with iRoot and tried to flash recovery in nearly every way possible....... I tried using Flashify, Rashr, TWRP manager..... Nothing worked.
1) On Flashify: I kept selecting Flash recovery but the message I get every time is "Error copying the file, please send me the log file".
2) On Rashr and TWRP Manager: They both say they flashed the file but when I boot into recovery all I see is gray screen with a gionee logo. I also lost my stock recovery this way.
3) On PC: My PC never detects my phone as an adb or VCom device........To check for VCom I tried SP Flash Tools..... didn't detects the device. For Adb I tried Adb devices in command prompt but the devices list is empty.
Some info:
I have USB debug mode enabled.
I have stock 5.0.2 android rom with no recovery just factory safe mode through which I can perform some tasks.
If you need any pics or any info just tell me in the comments.
I hope you guys help me.... Been trying for the last 6 days.
HELP ASAP SOS
Love,
Justin Biebar
Tarun0101 said:
Wassup aliens!
So I got this gionee M3 and I rooted it with iRoot and tried to flash recovery in nearly every way possible....... I tried using Flashify, Rashr, TWRP manager..... Nothing worked.
1) On Flashify: I kept selecting Flash recovery but the message I get every time is "Error copying the file, please send me the log file".
2) On Rashr and TWRP Manager: They both say they flashed the file but when I boot into recovery all I see is gray screen with a gionee logo. I also lost my stock recovery this way.
3) On PC: My PC never detects my phone as an adb or VCom device........To check for VCom I tried SP Flash Tools..... didn't detects the device. For Adb I tried Adb devices in command prompt but the devices list is empty.
Some info:
I have USB debug mode enabled.
I have stock 5.0.2 android rom with no recovery just factory safe mode through which I can perform some tasks.
If you need any pics or any info just tell me in the comments.
I hope you guys help me.... Been trying for the last 6 days.
HELP ASAP SOS
Love,
Justin Biebar
Click to expand...
Click to collapse
Hey i have the same problem. Can you suggest me something regarding this.
A very big question
Hello! I have an argentine copy of the M3, called Hyundai Ultra Energy, same processor, same storage, camera quality, all in the same place. My question is how do I install a custom rom and how do I flash the recovery at first. I use adb commands, but I know that I have to do it with spflash. How is the process? I download the rom, charge the scatter and tilt only in recovery? Would be dangerous? Is more safe to root with King Root?