First of all, I'm so sorry if I'm posting in the wrong forum, seriously. But I've tried every single solution and nothing works, so please bare with me.
My friend's phone is stuck at the "EmergencyData" message "The user data partition cannot be used again, please select Backup/Factory Reset/Reboot". It boots up, then restarts, and this message shows up. Forever.
She obviously tried all three choices but none of them works. So after some browsing, some people said a possible solution is to install UPDATE.APP. So I've tried.
I downloaded the .APP file specifically for the Y330 u05, copied the dload folder with UPDATE.APP inside to the root of the SD, then tried to get into Update mode pressing VOLUP+VOLDOWN+POWER.
Somehow in the holy living of the universe, it doesn't work. Tried every single combination, pressed at the same time, pressed the VOL keys first, nothing. All it does is go into Recovery and sit there.
So, I tried using ADB. Installed the adb package and drivers, installed the Huawei drivers, got the phone into Fastboot mode, connected to the USB, then extracted cust/boot/system.img from UPDATE.APP.
ADB recognizes the phone in fastboot, but when I try "fastboot flash cust cust.img" it only prints "erasing cust" and stays there forever.
Can someone help? According to Google searches, there's apparently no one in existence with such bad luck as mine when it comes to phones. Should I just tell my friend to throw this thing away?
My y330 need help
Same phone same problem. Here waiting the solution
I have a phone HUAWEI ASCEND y330 - U01 and he will be provided only to restart emergencydata and it lets you choose only one) Backup 2) Factory data reset 3) reboot it will not do them no. I tried to make the dload UPDATE.APP But do something. phone standing in front of only emergencydata it and when I try to make it turn briefly to make an immediate restart, and then again in front emergencydata. What should I do to get the phone to perform again
same my phon help me
same my phon help me
Related
To start off, I suffered, what seems to be a common problem, of the fingerprint unlock on Samsung Galaxy S6 Edge randomly being unable to recognise my fingerprint. Followed by my back-up password not being accepted. Unfortunately, I turned off my data and wifi before the phone locked so the problem doesn't seem to be able to resolve itself unless I Factory Reset the phone.
This i am happy to do as long as I can find some way to retrieve the media files from the phone (just pictures and videos). I read up and watched some videos where some people were able to use ADB through Recovery Mode or Field Test mode, and pull the files from the phone. These people however were using older models of Android phones but I decided to read numerous pages etc and go ahead and try.
I set up everything (I believe) i needed on my Mac Book pro in order to use the Adb Terminal. However when I tried to connect my phone Adb couldn't detect my device. I then decided (after reading somewhere to do so) to press "Apply update using ADB" on the Recovery menu. Again, Adb did not detect my device.
i left this screen up on my phone which resulted in "dm-verity verification failed..." appearing at the bottom of the screen. It then switched back to the Recovery menu and continues to show "dm-verity verification failed..." at the base of the screen. Now when I try and power up the phone normally, the start up screen just repeatedly flashes and it goes no further than that.
Im not completely brain dead when it comes to this stuff but I obviously don't fully understand what I am doing, So Im wondering if there is a genius out there who, even after what I've done, can help me pull the files from my phone before I have to Factory Reset!
The problem is, that you don't have the ability to use adb pull through the stock recovery. This kind of thing can only be done via a custom recovery like TWRP, CWM, or Philz. Now that it's not booting, pretty much the only thing to try is to install a custom recovery and boot directly into it before it tries to restart. Make sure you find one for the correct variant of your phone. If yours is a VZW or ATT version, you're in trouble because they don't have custom recoveries like that for them.
Hey, I think the phone is totally brick, can anyone confirm it? Here we go
The phone came totally crazy and it has restart automatically, and went to the Fastboot mode. (i dont know if it was updating something, i had not using it). So, I've UNLOCKED it with the code that Huawei brings, till here everything is fine. The problem becames when I try to flash the CUST, CACHE, ABOOT, and the others that I think that are useless, it says
"FAILED (remote: Command not allowed)". But I can flash SYSTEM, RECOVERY, BOOT and USERDATA correctly. But that doesn't solve the problem of the LOOP RESTART, it show the Logo of Huawei and keeps restarting. I also tried 3 other stock roms, and the problem persists. Also tried putting the dload in SD with the UPDATE.app, and starting the phone with 3 buttons pressed and I have the error of "Error:update.app is a invalid package" and doens't work. (If i go to the Recovery it just stay for 1-2 seconds and automatically restart again). I don't think it could be the power button because it stays well in the Fastboot mode and also tried the CWM and works. I've been searching solutions for around 5 hours and didn't found any. I wish someone could help me, thanks in advance!
PD: I have the ADB Drivers updated.
live it
Hello guys, here is the thing that happened to me. One day my Huawei P9 Lite started lagging and suddenly I couldn't even turn Wifi, bluetooth, mobile data or anything on. I couldn't even open the settings app. So I decided to factory reset the phone from recovery screen while booting. Factory reset resulted as successful, but after the reboot I got into first set up screen where I can only get over 2 steps where I come to choose my region and here is where it all lands. When I press next, it looks like going to next step but there is black screen for a second and it turns back to choosing region. I tried using all the regions but nothing. Next thing, I wanted to use download mode to reflash the device using downloaded stock firmware but I couldn't move the file to phone because the phone was not fully loaded. Next thing I tried was that I used ADB to push a file to computer and I got error. I have all drivers installed properly. Then I used Fastboot and rescue mode, where it says that my phone's bootloader is unlocked but when I try to flash device, it says 'Command not allowed'. I found on internet that I have to turn on debugging mode in settings but I can't start the phone so I don't know what to do.
Please help me, I don't know what else to do
Thank you very much
So here is what happened, its simple i was trying to root it, then something bad for god knows what happened, the recovery failed or maybe corrupt so i cant boot into it, then the fastboot also failed so this option also gone, then it was stuck on a bootloop, so with the two options of fastboot and recovery already made corrupt, i read on some forum to use spflash to flash a fresh stock rom, but that also failed (god!!!!!!!!) so probably that made the whole system corrupt, i tried every possible combination out there on the various forums and videos but nothing, it doesnt respond, the one and only thing i get is, it vibrates when i plug in the charger and vibrates again after some time and this thing keeps on, please HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Hello community,
I haven't posted here before, so I hope I'm not doing anything wrong.
I have a problem with my Neffos X1 and after browsing the internet for hours nothing helped so far, so I hope some of you can help me out.
My phone is stuck in a bootloop since yesterday evening. I haven't done any updates or new installations recently, so it just happened out of the blue. It loads till the Neffos logo and then restarts over and over again.
Since I can't take the battery out, I tried letting it run out of energy and then restart, but as soon as I connect it to a power source the bootloop will start again.
I read a lot about getting it in recovery mode or to try and flash it, but no matter what combination of buttons I try, nothing is happening. The phone basically doesn't react to anything and just keeps restarting. The only thing I noticed is, that when pushing both volume keys the screen will just stay black (no restarting), but after letting go the bootloop will start again.
I tried flashing it via SP Flash Tools, but the phone also doesn't react to it.
Lots of troubleshooting guides also require, that I have rooted my phone in the past, unfortunatly I haven't. I also read about unlocking the bootloader, but since my phone isn't reacting to any buttons and my laptop also doesn't seem to recognize my phone (probably because it doesn't boot proberly), that doesn't seem like a solution either.
To summarize: I'm stuck in a bootloop with no recovery mode, no rooting, no unlocking bootloader, probably can only use my laptop to do anything remotely.
So, is there anything you can think of, that might help me get out of the bootloop? Or ideas of what I may did wrong when trying the other solutions?
Thanks for any help in advance.
Same problem
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Shotzo said:
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Click to expand...
Click to collapse
Try this
Download phone's Stock Firmware onto your personal computer.
Install the USB MTK Drivers - NOT ANY OTHERS (skip if you have them already installed).
Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
Click the Scatter-loading button to navigate to the Stock Rom you just downloaded.
Select the Scatter File from the extracted Stock Firmware on your computer.
Select the Download Only in the SP flash tool option
Click the Download button to start the Formating process.
Connect your phone via USB to the computer>> holding volume + and volume – button of your phone at the same time or holding power button only so that the flashing process will starting working
Patiently wait for your device to be formatted.
After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
Unplug phone and boot it up.
If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
Voila, you are all good.