Hello
I have a phone
Huawei G730-U10
I have
Updates to custom ROMs G730-U10_ 4.2.2_C00B119
After a few days restarts several times
is not Factory reset
And I could not be installed again ROM
Even with Flash Tools
It does not display other off and even the logo Mobile
What do I do? what is the problem???
----
This was my test RAM with Flash Tools
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB / 8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000200000 (2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000 (2MB)
EMMC_PART_RPMB Size = 0x0000000000200000 (2MB)
EMMC_PART_GP1 Size = 0x0000000000000000 (0MB)
EMMC_PART_GP2 Size = 0x0000000000000000 (0MB)
EMMC_PART_GP3 Size = 0x0000000000000000 (0MB)
EMMC_PART_GP4 Size = 0x0000000000000000 (0MB)
EMMC_PART_USER Size = 0x00000000EC000000 (3776MB)
============ RAM Test ============
Data Bus Test:
[D0] [D1] [D2] [D3] [D4] [D5] [D6] [D7] [D8] [D9] [D10] [D11] [D12] [D13] [D14] [D15]
OK !!
Address Bus Test:
[A1][A2][A3][A4][A5][A6][A7][A8][A9][A10][A11][A12][A13][A14][A15][A16][A17][A18][A19][A20][A21][A22][A23][A24][A25][A26][A27][A28][A29]
OK !!
RAM Pattern Test:
Writing ...
0x44332211,
0xA5A5A5A5,
0xA5A5A500,
0xA500A500,
0xA5000000,
0x00000000,
0xFFFF0000,
0xFFFFFFFF,
OK !!
Increment / Decrement Test:
Writing ...
OK !!
============ NAND Test ============
SKIP! NAND Flash was not detected!
============ EMMC Test ============
EMMC Pattern Test (0x5A5A):
FAILED !!
Related
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC :
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000200000(2MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000E7000000(3696MB)
============ RAM Test ============
Data Bus Test :
[D0][D1][D2][D3][D4][D5][D6][D7][D8][D9][D10][D11][D12][D13][D14][D15]
OK!!
Address Bus Test :
[A1][A2][A3][A4][A5][A6][A7][A8][A9][A10][A11][A12][A13][A14][A15][A16][A17][A18][A19][A20][A21][A22][A23][A24][A25][A26][A27][A28][A29]
OK!!
RAM Pattern Test :
Writing ...
0x44332211,
sbarathprabu said:
===============Memory Detection Report ===============
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC :
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000200000(2MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000E7000000(3696MB)
============ RAM Test ============
Data Bus Test :
[D0][D1][D2][D3][D4][D5][D6][D7][D8][D9][D10][D11][D12][D13][D14][D15]
OK!!
Address Bus Test :
[A1][A2][A3][A4][A5][A6][A7][A8][A9][A10][A11][A12][A13][A14][A15][A16][A17][A18][A19][A20][A21][A22][A23][A24][A25][A26][A27][A28][A29]
OK!!
RAM Pattern Test :
Writing ...
0x44332211,
Click to expand...
Click to collapse
Woah! You just burnt your Nan drive! what have you done used any overclocking apps or kernel?
Sent from my XT1033 using XDA Free mobile app
Hello,
An error 5069 is displayed using Flashtool with my Micromax A116, just after the red and purple progress bar.
BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)
I format my A116 with Flashtool, tried Download or Upgrade.
I tried several ROM (Stock and Custom), different computer W7 and W8.1, different USB cable.
The download always stopped on that error (no yellow progress bar).
I also did a Memory test resulted as follow:
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC :
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000200000(2MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000E7000000(3696MB)
============ EMMC Test ============
EMMC Pattern Test(0x5A5A):
FAILED!!
BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
Any idea please?
My phone it's rooted, but i try to unroot, but dont working, reset factory not working, factory mode not working, why stuck and dont save my data on restart, i try install original stock rom, dont work, install rom, but not in my phone,
it looks the same... i need help, and idee it;s acceptable
Build number:W3500_M6582M_1413_00_V05A_RO
Hardware version: TMAOa
Kernel Version:3.4.5
Baseband version:MOLY.WR8.W1315.MD.WG.MP.V11.P11.2013/12/17 14:27
Android Version: 4.2.2
Model Number: Philips w3500
P.S: Sorry for my english
UP!
i need help, post my log files SP Flash Tool and my memory test have error, i take screen shot, but another problem it's:
============ Memory Detection Report ===========
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000200000(2MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000ec000000(3776MB)
============ RAM Test ============
Data Bus Test:
[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!
Address Bus Test:
[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
[A29]
OK!!
RAM Pattern Test :
Writing ...
OK!!
Increment/Decrement Test:
Writing...
OK!!
============ NAND Test ============
SKIP! NAND Flash was not detected!
============ EMMC Test ============
UP!
Really? Don't help me anything...... nice people....
I have a Philips W3500 flashed with Android 4.4.2.
Can you tell us which software you've used to root the Philips W3500 w/Android 4.2.2 ?
King Root, but phone is dead, battery overboost and fire ! Unlucky.....
Good day,
I have a problem with my phone Jiayu G5 1/4. MT6589 processor.
I think that the internal memory is moved into read-only mode.
I can not flash the phone via SP Flash Tools (error 1041) and CWM recovery.
Sometimes the firmware in SP Flash Tools succeeds. But when i reboot, stands an old firmware.
After Test Memory in SP Flash Tools this error :
BROM ERROR: S_DA_MT_DEDICATED PATTER ERROR (3094)
Result test memory :
============ Memory Detection Report ===========
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000200000(2MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000ec000000(3776MB)
============ RAM Test ============
Data Bus Test:
[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!
Address Bus Test:
[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
[A29]
OK!!
RAM Pattern Test :
Writing ...
OK!!
Increment/Decrement Test:
Writing...
OK!!
============ NAND Test ============
SKIP! NAND Flash was not detected!
============ EMMC Test ============
The solution to this problem is?
Thanks.
Hi, I have the same problem. I can flash the rom via flash tool successfully. But after reboot the phone stuck on boot screen.
Please help, if you have any kind of option or give any kind of suggestion.
hi guys ,i have a htc desire 820s (D820TS) when suddenly when i was using it it powered down when i tried to power it on i stuck in htc logo and i only can access recovery (stock recovery)
- when i try wipe data/factory reset i have error "error: cannot get phone encrpt state " ,
-then i tried flash the stock rom with i was on when the phone crash i get this error from sp flash tool
1- using download only or firmware upgrade i get error "PMT changed for the ROM it must be download".
2- using format all and download ,i get "error 3149 S-DA-SDMMC-WRITE-FAILED " and i tried format i get the same error ;
3-when i tried memorytest i get this :
============ Memory Detection Report ===========
Internal RAM:
External RAM:
Type = DRAM
Size = 0x80000000 (2048MB/16384Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)
EMMC_PART_RPMB Size = 0x0000000000400000(4MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000003a3e00000(14910MB)
============ RAM Test ============
Data Bus Test:
[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!
Address Bus Test:
[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
[A29]
[A30]
OK!!
RAM Pattern Test :
Writing ...
0x44332211,
0xA5A5A5A5,
0xA5A5A500,
============ Memory Detection Report ===========
Internal RAM:
External RAM:
Type = DRAM
Size = 0x80000000 (2048MB/16384Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)
EMMC_PART_RPMB Size = 0x0000000000400000(4MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000003a3e00000(14910MB)
============ RAM Test ============
Data Bus Test:
[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!
Address Bus Test:
[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
[A29]
[A30]
OK!!
RAM Pattern Test :
Writing ...
0x44332211,
0xA5A5A5A5,
and after the test completed i get BROM ERROR : S_FT_MEMORY_TEST_FAIL (4048).
what i think that my internal sd is damaged so i can't write on it. is there a way to fix this -like flash the rom on external sd-card ??
-i saw a post about doing that in galaxy tap p-1000 ,is this possible in my case -by changing the storage location in scatter file and reformatting external sd-card- i have a 16 GB class 10 memory ready for the process ;thanks in advance:fingers-crossed: .