Hi!
I have a very big problem I can't solve. Accidentaly I deleted all data of my phone including the Operating System (system.img) and searching and googling trying to download again the system.img i couldn't find it. Everytime I turn on the phone I goes to TWRP recovery manager or instead I can go into bootloader mode but never system. How can i install again the system EUI?
I tried to flash some roms (Cuoco92's, RuschRom, Official, Flyme Os even MIUI) but it has no solved the problem cause I think it was as a update.
I'm noob at this so I'll thank everything!
Related
Hi all,
I tried for a few days and seek no solution, therefore I would like to ask if anyone have such situation and got a solution.
Model: Lenovo S939
It was with android 4.2.2 which is the stock rom until I successfully flash it to android 4.4.2 which is the official VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36 about two months ago.
I think I accidently deleted some apps in the phone(I was trying to clear personal contents) and now the phone cannot turn on at all. I am able to connect the phone to my PC using USB and have the driver for it. So I can use SP_Flash_Tool_v5.1524.00.000. I have stock roms S939_S129_140217 and S939_S126_140109 in scatter form.
I flash one of them using the SP tool, but when I finish downloading and reboot, it go back to android vibe UI v2.0, and all sort of system processes stopped continuously, I cannot access the phone at all.
Then I reboot and boot into recovery ( CWM 5 for S939, get from Needroom). I have quite some customs roms saved in my Sd cards which I got from needroom.com:
VIBEUI_V2.0_1501_7.5.1_DEV_S939_WC19.ZIP
VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36.zip
Material_ROM_V3.zip
Loli_Dark_S939_FASTCHIP.zip
I try to flash every one of them, all of them say successful, but when reboot, I boot back to vibe UI 2.0 and all systems processes stopped continuously. I tried to patiently click “OK” and try to access the system setting to enable to USB debugging, but no success.
Have any one got such experience and a solution of it? Spent too much time trying to figure out and appreciate any input.
Regards,
Lacer
when i try to flash roms in recovery...
additional infos, when i try to flash roms in recovery mode, there are warning about no context
and if i go into meta mode and click the option to clear emmc, it restart itself and go back to the vibe ui with non stop pop out of processes stop error.
Lacerlacer said:
Hi all,
I tried for a few days and seek no solution, therefore I would like to ask if anyone have such situation and got a solution.
Model: Lenovo S939
It was with android 4.2.2 which is the stock rom until I successfully flash it to android 4.4.2 which is the official VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36 about two months ago.
I think I accidently deleted some apps in the phone(I was trying to clear personal contents) and now the phone cannot turn on at all. I am able to connect the phone to my PC using USB and have the driver for it. So I can use SP_Flash_Tool_v5.1524.00.000. I have stock roms S939_S129_140217 and S939_S126_140109 in scatter form.
I flash one of them using the SP tool, but when I finish downloading and reboot, it go back to android vibe UI v2.0, and all sort of system processes stopped continuously, I cannot access the phone at all.
Then I reboot and boot into recovery ( CWM 5 for S939, get from Needroom). I have quite some customs roms saved in my Sd cards which I got from needroom.com:
VIBEUI_V2.0_1501_7.5.1_DEV_S939_WC19.ZIP
VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36.zip
Material_ROM_V3.zip
Loli_Dark_S939_FASTCHIP.zip
I try to flash every one of them, all of them say successful, but when reboot, I boot back to vibe UI 2.0 and all systems processes stopped continuously. I tried to patiently click “OK” and try to access the system setting to enable to USB debugging, but no success.
Have any one got such experience and a solution of it? Spent too much time trying to figure out and appreciate any input.
Regards,
Lacer
Click to expand...
Click to collapse
it seems like something to do with the error 1041. I failed to test the nand flash
It seems like something to do with the error 1041. I failed to run a dedicated memory test in SP tool. Anyone have any though?
Lacerlacer said:
additional infos, when i try to flash roms in recovery mode, there are warning about no context
and if i go into meta mode and click the option to clear emmc, it restart itself and go back to the vibe ui with non stop pop out of processes stop error.
Click to expand...
Click to collapse
hi tech gurus, am having problem with this device, the device details are:
name: leagoo m8 pro
Android version: 6.0
ram:2GB
ROM:16Gb
chip: Mt6737M
processor:armv7
SDK:23
HOW THE PROBLEM STARTED
on the night of the day I bought the phone I decided to root it because I wanted to change the font and of course use xposed modules, I successfully rooted the phone, changed font successfully with ifont, now the only left is to install xposed framework, so I read all the info at the xposed thread, to know more about my device I downloaded CPU z, and mobile uncle, which said my device arm version is just arm.
I down xposed flashable zip in the arm category, which is v87, and it's The latest their till now.
I flash the zip file, everything went successfully via twrp v3.1.1 then I clicked reboot, phone switched off came on and displayed the white leagoo text, it was stucked there for like 12mins I coudnt wait any longer, so I removed and inserted the battery booted into twrp and wiped the cache, data, system and davilk cache, nvram, and click reboot but twrp said no ROM installed.
Guys I have no other option thab to flash the stock ROM, which I did, am sure I did it the right way, I used
sp flash tool v5.1
leagoo freemos V3.06(downloaded from leagoo website)
after flashing it showed green good mark, I rebooted the phone, as soon as the setup screen appeared the phone rebooted again..... till it long enough to allow me finish the setup.
guys as am typing with the phone am still experiencing the rebooting problem.
sometimes it will just random reboot,
or music will crack and reboot especially when the screen is off.
I have tried every thing I could, such flashing custom recovery even flashing earlier official stock ROM of the phones all to no avail
pls tech gurus help me, I just bought this phone
the highest up time I ever got on this phone is just 9 hours
thanks
Hi everyone ,
I'm writting here because i have some problems with my moto z.
I'll do a little resumer of what i've done with my moto Z before "bricking" it.
Firstly i got a Moto Z with the firmware XT1650 - 03. I decided to switch to the lineage custom rom because the oreo update was horrible for my battery.
So i used adb soft , unlocked the moto Z , installed TWRP and flashed the lineage os + the gapps. Everything was fine for a few month , then i saw a new custom rom on the XDA site , the "AOSP extended" i installed it i worked fine but it wasn't wat i expected , so i tried to go back to the lineage OS. I followed the "instruction" on the last post about it on this site https://forum.xda-developers.com/moto-z/development/rom-lineage-os-15-x-t3674351 .
And then the problem start.
First i tried to instal magisk , i started rebooting as indicated in the magisk tuto , but my device started to loop on the loading screen . I tried to restart it on the TWRP and flash the lineage OS plus the gapps but now it ask a password to boot and when i enter it it say the device need to factory reset.
I don't have any backupimage on me and the TWRP can't mount the internal storage , after every flash or anything else it say Failed to mount '/data'.
Can anybody help me , i can't find a solution. I don't care about what's on the internal storage and i have a sd card of 4 go (for any file to instal without accessing the phone ).
If you have a solution i'm ready to listen to you , thk for anybody who read this message.
Hello!
My dad was using Nokia 7.1 for a while but recently he asked for help with his phone which is constanlty restarting... Looking into other threads, I can see it is kind of known problem, so I hope you can help me somehow. The phone is running now on 00WW_3_51F. He doesn't remember what was recently done with the phone but I guess he simply updated it do Android 9.0... When I power on the phone, it boots correctly but restarts after few seconds (sometimes it's longer, up to 1 minute).
- I have already reseted phone to factory default but problem remained.
- I have tried to boot it in safe mode but same problem occurred.
I managed to access Settings>Advanced>Updates and noticed that there is an update available (V3.54H) with size 1299.4 MB. When I started to download it, phone crashed...
I was able to download V3.54H OTA from another thread in this forum with size 119MB (pretty weird...) and I am wondering if there is any chance to update it manually from SD Card or Fastboot. Assuming there is V3.51F version installed, can I simply execute command fastboot update update.zip in fastboot? Will it install only this patch to exisiting OS or replace it?
Do you have any other ideas how to fix it?
Thanks!
So i've a galaxy note 5 sm-n920g,i know its kind of an old device but i use it mostly for calls,step tracker and heart monitor etc but recently the software in the stock OS started to glitch and some of the apps were not exactly running smoothly,so i decided to change stock OS to lineage OS i found here.The main problem starts from here so i've installed twrp 3.4.0 and magisk but the only problem is whenever i try to move the lineage OS and gapps files to my phone via pc, the process of copying files gets cancelled on its own (idk if its an issue with my cable or phone or a bug from windows 11) i even tried to flash OS via Odin but its no use as well as odin is stuck at boot.img for like 20-30mins now.Please help coz i accidentally deleted my stock OS without any backup. I must somehow get my phone running