Hi everyone ,
I'm writting here because i have some problems with my moto z.
I'll do a little resumer of what i've done with my moto Z before "bricking" it.
Firstly i got a Moto Z with the firmware XT1650 - 03. I decided to switch to the lineage custom rom because the oreo update was horrible for my battery.
So i used adb soft , unlocked the moto Z , installed TWRP and flashed the lineage os + the gapps. Everything was fine for a few month , then i saw a new custom rom on the XDA site , the "AOSP extended" i installed it i worked fine but it wasn't wat i expected , so i tried to go back to the lineage OS. I followed the "instruction" on the last post about it on this site https://forum.xda-developers.com/moto-z/development/rom-lineage-os-15-x-t3674351 .
And then the problem start.
First i tried to instal magisk , i started rebooting as indicated in the magisk tuto , but my device started to loop on the loading screen . I tried to restart it on the TWRP and flash the lineage OS plus the gapps but now it ask a password to boot and when i enter it it say the device need to factory reset.
I don't have any backupimage on me and the TWRP can't mount the internal storage , after every flash or anything else it say Failed to mount '/data'.
Can anybody help me , i can't find a solution. I don't care about what's on the internal storage and i have a sd card of 4 go (for any file to instal without accessing the phone ).
If you have a solution i'm ready to listen to you , thk for anybody who read this message.
Related
Hi!
I have a very big problem I can't solve. Accidentaly I deleted all data of my phone including the Operating System (system.img) and searching and googling trying to download again the system.img i couldn't find it. Everytime I turn on the phone I goes to TWRP recovery manager or instead I can go into bootloader mode but never system. How can i install again the system EUI?
I tried to flash some roms (Cuoco92's, RuschRom, Official, Flyme Os even MIUI) but it has no solved the problem cause I think it was as a update.
I'm noob at this so I'll thank everything!
Hello Everyone,
I tried to install android Oreo AOSP rom in my Redmi note 3 SD from zcx recovery. Well, I've tried many times doing all the stuff like...formatting /data manually. The rom installs perfectly, the booting screen starts and then it ends up in a screen where it asks a password, Regardless of whatever I enter there I get the same message " Decryption Unsucsessfull- reset your phone". If I click in the reset phone button in the screen it takes me to the recovery, formats the phone and then ends up in the same error message screen. I urgently need a solution for this , Please help me!!!!!
https://forum.xda-developers.com/showpost.php?p=73621481&postcount=648
pumpkins12 said:
https://forum.xda-developers.com/showpost.php?p=73621481&postcount=648
Click to expand...
Click to collapse
Not Working !! Still getting the same message !!!
I think that you should flash a stock rom using mitool
I installed Nitrogen OS with Android 8.0 this solved my problems. I also installed the stock ROM and locked the phone before all these.
Hello.
Please i need your help guys.
My Wife's moto z came with defective bluethoot and was rebooting and freezing, after that i decided to Unlock bootloader and install Lineage rom.
Now Baseband is NOT FOUND and phone Bluethoot reboot phone at boot 3 time before it sucessfully boots and when i try to open settings i got some crashes due to phone tryingto read bluethoot.
Now phone is useless..
MOTO Z SHAREDIAN
Try to reflash stock ROM, try then to update to the current version.
If it doesn't find any update, use this tool:
https://forum.xda-developers.com/moto-z/development/tool-motorola-ota-link-generator-tool-t3537039
Background: I recently flashed a nougat stock rom (retbr on reteu device) and it showed "Baseband: Not Found" (or something like that) in the bootloader. When the latest update was installed, there was something written, and wifi/bluetooth is working well in cuetom rom.
Hello everyone, i checked a lot on internet and on the forum, but anyone has my phone or had the same problem
So, i have a xiaomi mi note 3 with the last global stable 9.5.3.0, miui 9.5 the bootloader was unlocked with the official way
I wanted to root the phone so i downloaded 4 different twrp because some of them just didn't work, i couldn't do nothing, the touch didn't worked or just the phone doesn't responde at all.
So, i found the twrp version that it works, i copied supersu on the main phone's directory and reboot the phone in twrp mode
and here the first problem.
I could find nothing, twrp says i have 0 bytes
i didn't touched anything in twrp setting, so i tryed with a data wipe and my phone got a soft brick
i flashed my rom again, unlocked the bootloader, installed the twrp again and again, 0 bytes
i tryed to wipe data again, soft brick again
Tired of that i just flashed again the rom and actually my bootloader is locked, cuz bored to do the first set up over and over
I really hope someone can help me
Sorry for my english, i know it's bad but it's not my first language
Anyone can help me ?
So, finally i solved the problem
I hope it will help ppl that they have my same problem
As i said i have xiaomi mi note 3 with miui 9, with the global rom 9.5.3.0 Stable, the only one twrp that it works on my phone is the last, 3.2.1-0 version
After i flashed twrp with fastboot it just asked me a password, and nobody knows what password it's needed, just skip that and press cancel
After that i couldn't find magisk or supersu in my internal storage cuz it said i had 0bytes on it, so i did a wipe data but after that the phone got softbricked
So i just pressed volume + and power button to get inside twrp again and now my storage was fixed, so i connected the phone at the pc and i copied magisk inside the internal storage
I flashed it and reboot my phone, it tooks about 5 - 10 minutes so it started the first setup again
After that magisk was finally on my homescreen, i downloaded root checker and it said my device was properly rooted
Hi everybody, excuse me because i'm a newbie.
After many tries, i have been able to flash a new rom on my Galaxy J320FN (if uou are interested on the method and toos that i used :
Install Twrp 3.0.2 (the only one i have been able to download using Odin, all the other newer releases seemd good downloaded but in the reboot were replaced by original Samsung recovery).
After the install of Twrp i followed the procedure, cleaning data, cache and flashing Lineage OS214 and in a second moment the Gapps package.
The phone is much more better than with old Android 5.1 originally installed and everything works fine except the Wifi.
I can see all the ssids near to me but when i try to connect i can see that the devices makes many tries (i see Connecting) and after a while writes (Saved).
The tries continue and while the device says Connecting i see a toast message (Password may be incorrect) but the password is good because with the same password i connect with my notebook.
I have googled and i found someone that had my same simptoms after flashing Lineage Os214, in some cases one of them solved with some tips in developer section, in other cases , changing the Country in the advanced section of the wifi Menu, but noone of these solutions worked for me.
Is there someone that can help me to solve the problem ?
Another question, is Lineage Os14 the newer rom for my Galaxy SMJ320FN ?
Same here!
maurososcia said:
Hi everybody, excuse me because i'm a newbie.
After many tries, i have been able to flash a new rom on my Galaxy J320FN (if uou are interested on the method and toos that i used :
Install Twrp 3.0.2 (the only one i have been able to download using Odin, all the other newer releases seemd good downloaded but in the reboot were replaced by original Samsung recovery).
After the install of Twrp i followed the procedure, cleaning data, cache and flashing Lineage OS214 and in a second moment the Gapps package.
The phone is much more better than with old Android 5.1 originally installed and everything works fine except the Wifi.
I can see all the ssids near to me but when i try to connect i can see that the devices makes many tries (i see Connecting) and after a while writes (Saved).
The tries continue and while the device says Connecting i see a toast message (Password may be incorrect) but the password is good because with the same password i connect with my notebook.
I have googled and i found someone that had my same simptoms after flashing Lineage Os214, in some cases one of them solved with some tips in developer section, in other cases , changing the Country in the advanced section of the wifi Menu, but noone of these solutions worked for me.
Is there someone that can help me to solve the problem ?
Another question, is Lineage Os14 the newer rom for my Galaxy SMJ320FN ?
Click to expand...
Click to collapse
I am in a similar situation with my OnePlus.