So,frist of all...my pc is recognizing sony xperia e3 dual in fastboot mode,the smartphone need to be flashed , because just sony's logo appear when I turn the mobile on ,so....When i put it on fastboot mode,my pc recognize it and i can hear the sound of a new hardware pluggedd...however when i put it on flash mode (Green led) the pc just stay the same thing...nothing happens ,no sound,just stay the same thing.....i tried to flash via fastboot,however the device was bootloader locked,so i unlocked it and triedto flash, but.....command not allowed message,please help me beacause i really don't know what can i do!
Related
My Xperia Ray is originally from SFR. Simlock is removed (code from SFR).
I tried to unlock bootloader using control point method - S1Tool said it's OK (I don't know how to check if it is really OK). I flashed new radio (v.77) without problem using flashtool.
Now I'm trying to enter fastboot mode to change kernel and ROM - no success. Nothing happens if I connect the telephone to PC with Vol+ pressed (it just starts charging). Nothing if I start it Vol+ pressed (it just starts normally). The LED is never flashing blue.
I tested another Xperia Ray (from Bouygues Telecom) - the same thing, no fastboot mode.
Any suggestions?
So,did you have the drivers properly installed on your PC?
You can find it while installing Flashtool.
install drivers from folder in flashtool and then :
1. Disconnect phone from USB
2. Turn off phone (make sure you have at least 50% battery) and wait 30 seconds.
3. Hold the 'Volume UP key' WHILE inserting the USB. --> LED turns blue = fastboot mode.
4. Leave the phone turned off
Sure, the driver is installed.
Nothing happens when I try to connect it Vol+ pressed, NOTHING.
The PC does not see the phone, the phone goes to charging, the LED does not flash blue.
:crying:
no os no recovery no pc detection
hi i'm having a similar problem With my xperia ray
where i have done this:
went into recovery mode via pvyparts
formated system formatted cache formatted dalvik caches
then partioned the sd card
then selected reboot recovery
stuck in boot logo
then phone turned off
pc will not detect the phone
installed 4.2 adb drivers pc companion drivers
flashtool will not detect the phone either
thank you for all the help
Hi there,
I have a rooted xperia u with unlocked bootloader. I've tried to install the cm9 following a guide where the requirement of the installation was having an original Sony firmware installed on the device. I didn't saw that requirement, and I installed it with a custom rom on my phone. So after flashing the kernel I turned on my xperia...
Bricked.
It made only the vibration but no Sony logo appeared. So, I connected it in flashmode on my computer (with windowsXP) with green led working, but flashtool gived me the message that I must install the phone drivers (even if I had already installed them on my pc). I tryed to reinstall them but nothing canghed.
I also tried to connect the phone on a windows 7 pc always with flastool (and drivers installed) but in that case neither fastboot mode or flashmode, nor any vibration was working (pc doesn't detect it).
I tried to connect the phone with removed battery or also a reset with power and volume up buttons but nothing...
It's still like this, with fastboot mode or flashmode not working with any pc... :crying:
Is there anything that I can do?
Thanks in advance.
Head to Sony service centre
Hit thnx
Sent from my ST25a using XDA Premium 4 mobile app
daddets97 said:
Hi there,
I have a rooted xperia u with unlocked bootloader. I've tried to install the cm9 following a guide where the requirement of the installation was having an original Sony firmware installed on the device. I didn't saw that requirement, and I installed it with a custom rom on my phone. So after flashing the kernel I turned on my xperia...
Bricked.
It made only the vibration but no Sony logo appeared. So, I connected it in flashmode on my computer (with windowsXP) with green led working, but flashtool gived me the message that I must install the phone drivers (even if I had already installed them on my pc). I tryed to reinstall them but nothing canghed.
I also tried to connect the phone on a windows 7 pc always with flastool (and drivers installed) but in that case neither fastboot mode or flashmode, nor any vibration was working (pc doesn't detect it).
I tried to connect the phone with removed battery or also a reset with power and volume up buttons but nothing...
It's still like this, with fastboot mode or flashmode not working with any pc... :crying:
Is there anything that I can do?
Thanks in advance.
Click to expand...
Click to collapse
As I understand you flashed only kernel for CM9? And it happend?
Cwikla said:
As I understand you flashed only kernel for CM9? And it happend?
Click to expand...
Click to collapse
Sorry Cwikla, I didn't flashed the kernel, but the rom. I wrote it wrong.
Try getting into fastboot. Even without drivers, you might be able to do so. Bring up the fastboot menu in flashtool, then plug in your phone in fastboot. Quickly hit reboot into fastboot (via fastboot). Then flash another kernel and restore a nandroid backup(if you have one)
Hello friends, i have a problem with an old Sony LT18i from a cousin, he brought it to me because he has the China Mobile variant with no GApps and android version was 2.3.4, i thought it might be solved with a simple flash via FLashtool, but when i've completed the downloading of the ftf file and went to flashtool to flash it, when the flashtool ask me to put it in flashmode pressing the back button and connecting to usb the phone led only blinks of 0.5 sec and then boots into normal mode.
Tried the same with fastboot and then i got the same blink for 0.5s with no detection at all. That surprised me as well i've have flashed succesfully other Xperia devices with no problems of led blinks at all. Now my problem is that later i tried to root the phone and installing CWM to flash another ROM or GApps package, and when i finished to install the recovery now the phone is bootlooping and never gets to boot normally.
I've tried with 4SE dongle to flash it via Testpoint and it doesn't work as the phone manufacture model is 12W13 (new security) which the dongle doesn't support, tried with S1 Tool with version 28II215 and 080714 and i only get PHONE NOT SUPPORTED IN THIS MODE when i try to flash and when trying to unlock the bootloader it gives me NOT SUPPORTED MCU REVISION.
The phone was working well until the CWM installation except for the flashmode and fastboot mode, now i really need to flash it and i can't find a way to do it, i also have RIFF JTAG and Z3X Easy JTAG box but no JTAG available for this model except for Medusa Box which only supports phones with manufacture date less than 12W10, i was wondering if there´s a way to access via QHUSB_DLOAD mode doing the testpoint to manually flash partitions to device or something like that. If you might have a workaround or a solution to at least let the phone in the way it was it will help me a lot. Thanks in advance, sorry if my english isn't so great.
hello like the title said
i cant seem to enter flashmode. fastboot and recovery works fine tho
i was trying to install stock rom, xperia companion app and flashtool doesnt help
flashtool said something like usb debugging off, and 2011 devices bla bla (usb debugging IS NOT OFF its ON) tried 2 different version the 9.18 and 9.2
the green light did light up only like 1s then off then light up again then its gone for good
after that the phone connected to pc and recognized as somc flash device but not recognized by flashtool or xperia companion
first off all its not really a problem because i can still go to fastboot and recovery to flash ROM
but since i want to revert to stock rom (not modified,rooted or anything)
can someone guide me how to fix it? i tried 2 pc + a laptop, flashmode still not detected
Same problem
I'am with same a problema, u have a solution?
You have to wait for flashtool to ask you to connect your phone in flashmode and that is after you've loaded your firmware to flash
Your phone will only stay in flashmode (green led) whilst it is receiving data if it is not receiving data it will switch off after a few second's
So basically I suddenly got this system ui error which caused my phone to go into a bootloop eventually when starting up you could only see sony logo and it would stay on.
I tried to use xperia companion to do a software recovery but my phone would not be recognized. (the led does turn green when you press volume button down)
I tried using flashtool and installed drivers without driver signature but again when flashing it doens't recognize my device.
When the phone is in fastboot mode the device is recognized by flashtool. I tried it with 3 different pcs and 3 different USB cables and nothing.
I have never done anything to my phone so the bootloader is still locked.
I was wonder if I can still recover my phone but than via fastboot mode.
phone specs:
Xperia z2 d6503
os: marshmallow
kernel: 23.5.A.1.291
Thanks in advance for any help