okey i unlocked the bootloade with this tut: http://forum.xda-developers.com/showthread.php?t=1254225 then i had "no service" on my phone (i think beacuse i used the msm7227_Setool2.cmd). first i thought it might be an problme with the software so i installed MiniCM7-2.1.3 because the bootloader was unlocked. but htat didnt fix it. but now i accidentally flashed it with the stock kernel. it wont boot and it wont go into flashmode. so can you plz give me any suggestions how to solve this problem? thanks!
sorry if i made any mistakes im new to this forum
it just shows the sony ericsson logo
have you tried pc companion and update service it may get your phone working.
yes but it says i have to activate the usb on it to connect/use it with pc companion. and as i doesnt boot, i cant do this.
Have you tried se update service as you say your phone is not booting.
If update service can't do the magic then you will have to go for flashing tool ....
i cant get into flashmode (when the green led is on). so update service and pc companion dont detect it
now use flashtool and follow all the instruction on this link below
http://forum.xda-developers.com/showthread.php?t=825664
ok im trying this one
okey im desperate here, maybe you posted a wrong link or what ever. i tried to flash with flashtool. i even created a bundle. but is still not recognising it in flash mode.
okey solved it
took the battery cable out pushed the back button and put the cable back in place then i plugged the usb cable in and it wet into flashmode
finally i just relocked my bootloader with s1tool
thanks for your help
Hi to all! I've a very big problem! My x10 show me only Sony Ericsson.
Idid try to flash but nothing...pc don't recognize my phone...i tried with sues, pcc and flashtool...what can i try to solve it? please help me!!!!
ps: if i plug-in x10 without battery to pc, it show me the green led...and after hold back and put battery, it show me green led for 5-10 seconds and after the green led turn off and show me sony ericsson
What did you do to your X10 that made it do this? What did you try flashing via Flashtool that didn't work?
i was on miui e all gone well....after i tried to install the black edition HD...after that i had this problem...
if i try to connect in to flash mode x10 to pc, it don't work...the pc don't recognize my x10
Did you format your data after changing ROM?
Sent from my X10i using XDA App
yes i did it...
Maybe You have wrong kernel?
Shindoruk said:
yes i did it...
Click to expand...
Click to collapse
i don't know...but i don't think...but the problem is another...why can't i plug-in and flash it? why didn't pc recognize my x10?
HElp Help Help!!!!
Ok. Judging by the fact that you're stuck on the Sony Ericsson logo, I'm assuming you're on the stock kernel and also on locked bootloader. Because you tried to install BlackHD Edition as well, I'm assuming you also have CWM.
The simplest method is if you made a backup in recovery and can access recovery. If you did this, you can simply restore the backup to get the ROM and data you were using before back. If this does not work properly (sometimes backups are screwed up somehow in recoveries), read on for the flashing method.
The X10 showed a green LED when you plugged it in which suggests that it can access flash mode (which is what I'd expect if you didn't tamper with the X10 so much as to break even that). If you have FlashTool, the following series of instructions should work:
1. Download the Xperia X10 stock firmware and move them to the firmware folder of the X10 FlashTool (the firmware can be found in this thread as well as the latest FlashTool: http://forum.xda-developers.com/showthread.php?t=920746)
2. Open FlashTool and press the flash button at the top left of the program
3. Select the stock firmware from the list and press ok
4. Instructions telling you to turn off and unplug your phone and plug it in with flash mode should pop up (hold back while plugging the cable in). Follow them and wait.
If you did this properly, you should have flashed the stock Sony Ericsson firmware with everything as it was when you bought the phone (if you flashed the 1.6 firmware) or updated the X10 to 2.3.3 (if you flashed the 2.3.3 firmware). That should be the most fail-proof and reliable way (I've saved my X10 from my stupid experiments through this several times already)
Just a little side note: If my assumptions are correct, you tried to flash the BlackHD Edition MIUI-based ROM through CWM on a locked bootloader and stock Sony Ericsson kernel probably without flashing the lockedbl.zip that's provided in the BlackHD Edition thread. Most FXP custom kernels work with that ROM without a problem, but the stock one just doesn't because it's far too different. You could have either chosen the locked or unlocked installation method on the thread (I know because I've done it before). The unlocked one requires an unlocked bootloader and a FXP custom kernel, neither of which I think you have. The locked method only requires CWM installation and for you to flash the lockedbl.zip after installation. I think your issue must have come from the fact that you forgot that last part, or some other strange error occured.
Panzerfaust101 said:
Ok. Judging by the fact that you're stuck on the Sony Ericsson logo, I'm assuming you're on the stock kernel and also on locked bootloader. Because you tried to install BlackHD Edition as well, I'm assuming you also have CWM.
The simplest method is if you made a backup in recovery and can access recovery. If you did this, you can simply restore the backup to get the ROM and data you were using before back. If this does not work properly (sometimes backups are screwed up somehow in recoveries), read on for the flashing method.
The X10 showed a green LED when you plugged it in which suggests that it can access flash mode (which is what I'd expect if you didn't tamper with the X10 so much as to break even that). If you have FlashTool, the following series of instructions should work:
1. Download the Xperia X10 stock firmware and move them to the firmware folder of the X10 FlashTool (the firmware can be found in this thread as well as the latest FlashTool: http://forum.xda-developers.com/showthread.php?t=920746)
2. Open FlashTool and press the flash button at the top left of the program
3. Select the stock firmware from the list and press ok
4. Instructions telling you to turn off and unplug your phone and plug it in with flash mode should pop up (hold back while plugging the cable in). Follow them and wait.
If you did this properly, you should have flashed the stock Sony Ericsson firmware with everything as it was when you bought the phone (if you flashed the 1.6 firmware) or updated the X10 to 2.3.3 (if you flashed the 2.3.3 firmware). That should be the most fail-proof and reliable way (I've saved my X10 from my stupid experiments through this several times already)
Just a little side note: If my assumptions are correct, you tried to flash the BlackHD Edition MIUI-based ROM through CWM on a locked bootloader and stock Sony Ericsson kernel probably without flashing the lockedbl.zip that's provided in the BlackHD Edition thread. Most FXP custom kernels work with that ROM without a problem, but the stock one just doesn't because it's far too different. You could have either chosen the locked or unlocked installation method on the thread (I know because I've done it before). The unlocked one requires an unlocked bootloader and a FXP custom kernel, neither of which I think you have. The locked method only requires CWM installation and for you to flash the lockedbl.zip after installation. I think your issue must have come from the fact that you forgot that last part, or some other strange error occured.
Click to expand...
Click to collapse
yours assumptions are correct.
About instructions to how to connect to flashtool, i know they. i click on flash button, select firmware and when pop up to plug-in, i do it...but don't work...don't connect...
As in, it doesn't recognise the device?
I think there's another way where you take the battery out and plug the phone into the computer. The green LED should light up for about 5-10 seconds (when it's in flash mode) where you have a window to select the firmware and flash. I haven't personally tried it, but I'm asking someone who has done it about how it's done. You might want to try that method as you can't really do much else with your phone right now. I'll update this post once I know the exact method and details
panzerfaust101 said:
i'll update this post once i know the exact method and details
Click to expand...
Click to collapse
thanks a lot
anything news? please i need help!!!!!!
Once flashtool asks you to connect USB cable..connect the phone with the battery removed. THEN replace the battery while holding the power button and it should start up into flashmode.
It may even work without holding the power button...
Its strange because when stuck at SE logo you can't follow the on screen directions to get it to work
Sent from my Inspire 4G using XDA App
pissat4motion said:
Once flashtool asks you to connect USB cable..connect the phone with the battery removed. THEN replace the battery while holding the power button and it should start up into flashmode.
It may even work without holding the power button...
Its strange because when stuck at SE logo you can't follow the on screen directions to get it to work
Sent from my Inspire 4G using XDA App
Click to expand...
Click to collapse
it doesn't work
try this man, http://forum.xda-developers.com/showthread.php?t=1504809
hope it helps
Help
Shindoruk said:
yours assumptions are correct.
About instructions to how to connect to flashtool, i know they. i click on flash button, select firmware and when pop up to plug-in, i do it...but don't work...don't connect...
Click to expand...
Click to collapse
Sir I'am a newbie, And I've got that same problem, my next problem what flashtool should i use? sorry for being a noob, just curious, thanks a lot for your reply
epep420 said:
Sir I'am a newbie, And I've got that same problem, my next problem what flashtool should i use? sorry for being a noob, just curious, thanks a lot for your reply
Click to expand...
Click to collapse
If your bootloader is locked, you can choose the option to repair phone in pc comp. Another possibility why your phone is not detected might be because of drivers.
It may also because of his usb not working , the problem might have started . I want to check out whether your phone is charging and i also want to know that in devicemanager your phone when connected in flash mode shows as "semc usb device "
Thanks
Can U Access XRecovery Menu ?
Can U Access XRecovery Menu ?
- Connect Usb Cable -
- Mount System (in XRecovery) -
- Open Sony Pc Companion -
- Select Repair -
- it says connect your mobile in flash mode -
- u dont remove the cable -
- unmobut System (In XRecovery)
- remove usb cable -
connect in flash mode - IT REPAIRS YOUR MOBILE .
Try This Once..Worked For Me
Hi, so..here's the problem. I've tried to flash my tablet with a 307 firmware, mine was 253.
now i downloaded Flashtool, Downloaded the firmware. done everything the way it meant to be.
and then in the middle of the execution it said something about failure and stopped.
now my tablet won't boot.
When ever i try to boot it, it just shows the Sony logo and dies.
and when i hold the volume down and connect USB the green led light is there just for a split second.
but the volume up and connecting USB shows the blue with no issues.
any chance anyone can help me ?
Edit : I Understand now that those things are normal. the problem is that no software would recognize that the device is in flash mode or fast boot mode.
With that I do need help.-
Edit : What? that's it? I can throw it out of the window or what?
Nothing?
Anyone?
It's been few days..
have you unlocked the bootloader to do your root or did you just go straight ahead to root your XTZ? either way is fine as the root tool kit by doomlord works both ways.
make sure your tablet is charged. did you use the flash tool by bin4ry and androxyde? you can also download sony software emma (if you've unlocked your bootloader)which will restore your tablet to manafacturer default. or just use sony pc companion software if you havent unlocked the bootloader this will work too.
the fact that the sony logo still appears on your tab at least shows its not bricked, ive had my fair share of thinking i'd bricked my tablet but if you've done your research you'll find you can get it back to working order.
Xperia MINI ST15i
I have exhausted every method I can find. Fastboot seems to be broken. Fastboot and Flashtool both do not detect the device when it shows BlueLED(fastboot). PC Companion doesn't detect at all.
Flash Mode seems to be working. It seemed like it was flashing, progress bar and everything. When it was done it said for FLASHTOOL, the phone has to have usb debugging and unknown sources checked. Being that I am bricked, there is no proper system installed .
In FLASHTOOL & EMMA unlock bootloader doesn't work. I got the code for it to do in FASTBOOT or keypad but neither are accessible.
I believe I flashed a recovery for the wrong xperia model =/
Are there any other potential solutions?
So my mothers xperia z5 compact have gone totaly bricked after making a software update and i can't find a way to fix it in anymay. It bootloops and after the white sony logo it shows a dead android with the message "Fel" (Wrong in swedish) and and just continue in a cirle like that. I can't seem to get into either recovery or fastboot tried with adb/fastboot with the computer still can't acces it, neither sony companion recognice it. Anyone can maybe have a solution will make a big help here because i'm totaly out of ideas to fix this.
This will remove all data, except SD card.
Requires Windows and a 2.6GB download.
Search for flash-tool-for-xperia-devices download Sony''s website and install, will install as Emma
Hold volume down and insert a USB that is already connected to your pc, release when power LED turns green
In Emma chose an service and click Apply Service
This will download and install it to the phone.
Download flash tool and download the proper tft using xperifirm then flash it.... http://www.flashtool.net/downloads.php
If you search the forum you can definitely find a guide on how to use the program.
I also bricked my phone. Tried flashing a generic TFT in Flashmode via the Flashtool, and it seemed to go through.
But now, it shows "Update failed, please connect your computer" logo when I try to boot it.
I had previous tried mucking around in fastboot mode trying to flash Lineage.
I may have accidentally messed up my boot.img. If so, which one will I need to flash, and how to go about doing it?