Hi guys,
Couple days a go i hard bricked my galaxy s3 i9300 international.
So my question is. I have only acces to stock recovery. Download mode etc works on phone but i cant debug this phone on pc. NO WAY.
How can i back to live with this gsm? It does no matter what rom is but i want only that he works.
Tell me nothing about,
-cwm
-twrp
-odin
-usb debug
Only way is i can put files on sd card and install on stock recovery..
I hope everyone understand me. I installed some cynagogenmod but if gives error.
Related
Hi xda , i have this china-bought Galaxy S3 GT-I9300.
It started out with gps not working and i tried to flash a stock rom using odin (device was rooted) and it failed after countless flashings.
And then whenever I tried to boot the device again it was stuck at the ''Samsung GALAXY SIII GT-I9300'' screen. not sure if it was a bootloop but it was just hanged there. I have cwm recovery mode but i can't access download mode however i tried. And all of my computers cant seem to detect the device. so basically the thing i am able to access now is the cwm recovery mode. i tried various roms but to no avail.(they all hanged while installing system files)
Some specs about this device i know:
- Board : uniscope77_bu3_cu_ics2
- CPU : armeabi-v7a
some additional info : i once formatted everything on the device using cwm (internal storage , system , everything)
-I tried reset to factory settings countless times too but they were all stuck at the ''Samsung GALAXY SIII GT-I9300'' screen.
-Its original stock firmware was from china and yes , ive tried using china stock rom and all i get was blahblahblah and a ''(bad)'' thing.
if you need anything else like what other things i did to the device pls tell me. pls help me solve this problem thanks you ^_^
site
zBurnXz said:
Hi xda , i have this china-bought Galaxy S3 GT-I9300.
It started out with gps not working and i tried to flash a stock rom using odin (device was rooted) and it failed after countless flashings.
And then whenever I tried to boot the device again it was stuck at the ''Samsung GALAXY SIII GT-I9300'' screen. not sure if it was a bootloop but it was just hanged there. I have cwm recovery mode but i can't access download mode however i tried. And all of my computers cant seem to detect the device. so basically the thing i am able to access now is the cwm recovery mode. i tried various roms but to no avail.(they all hanged while installing system files)
Some specs about this device i know:
- Board : uniscope77_bu3_cu_ics2
- CPU : armeabi-v7a
some additional info : i once formatted everything on the device using cwm (internal storage , system , everything)
-I tried reset to factory settings countless times too but they were all stuck at the ''Samsung GALAXY SIII GT-I9300'' screen.
-Its original stock firmware was from china and yes , ive tried using china stock rom and all i get was blahblahblah and a ''(bad)'' thing.
if you need anything else like what other things i did to the device pls tell me. pls help me solve this problem thanks you ^_^
Click to expand...
Click to collapse
Where did you bought it?
China
your screwed the only thing you can do is download Chn_Chn Firmware from Samsungs website and flash it though odin. And that's the only fimrware that will work, unless you flash a custom bootloader through your sd card as then it will overwrite the encrypted boot.img allowing you flash any European Firmware.
*Urgent* Bricked S3(gt9300)? Accidentally wiped my s3 (in allianz rom bootloader screen) .* It then vomplrtely wouldn't work, so I used odin to put a stock rom on (via pda)* Success ! working completely fine until it lost power & will only ever get as far as the samsung logo when turned on. Need urgent diy help to get my phone working again,* I have tried a number of how-to's on fixung a bricked s3 via odin with no luck!* the error message is along the lines of no partion available & will fail no longer than 2 seconds into process. no matter what rom ; custom or stock Im unable to fix.* My guess would be that ive deleted whatever software in phone that would recognise a rom. Notes: I am competant in use of android just very good at making mistakes.* The only feature available is the download usb mode. Any help would be appreciated especially if it works, Im sure someone else has had the same problem!
samsung s3 att -4.1.1
Galaxy note 10.1 -4.1.2
Im a user of these 2 devices and not a developer maybe in the future i will (maybe), but still i recently updated a good app and now both rebooted at the exact same time and now booth stuck in a boot loop.
(reported the app)
NOT ROOTED ON EITHER.
ALL STOCK LEGIT UPDATES
I can access the odin screen and the recovery screen.
I need these devices back i use them as my computer and phone.
Some issues-
They wont show up on my computer when connected
kies has never worked on my computer right so thats out.
Ideas would be great and i know this isnt meant ofr this forum really since its more developer problems but i figure those who root and abuse the devices can fix them some how.
1) would having a legit version of the samsung 4.1.2 and tell the tablet to install that from the recovery would that fix it?
2) since i get in to odin!!! can i put a Rom on it and get that to work. ( no clue how to root and do this)
If so please link a video and everything i need to do it
Anyhting please anyone the information is priceless...
I have had my gs3 fixed before with the sdcard bootloader file but i cant get it to work this time. dose anyone know how to un brick a galaxy s3 I535 without jtag. i can not get into recovery, the phone will buzz when the sdcard with the bootloader is inserted, but it will not do anything else. windows dose not recognize it. please help i really dont want to send my phone out to a jtag service.
Follow the steps listed here http://www.sammobile.com/firmwares/download/31550/I535VRUDNE1_I535VZWDNE1_VZW/ and if this it is not the rom for your phone you can search it here http://www.sammobile.com/firmwares/
If it is bricked will never go into recovery , you will only be able to go in flash mode , the one listed in the step list. It is valid to all android phones , once the phone does not boot or gives random flashes on screen and etc and even won't turn off, you must press the buttons in the order to flash.
I accidently bricked my phone and i tried everything on XDA. So i basically wiped completely everything on my phone including all the advanced options in advanced wipe this includes internal storage, system and USB OTG and the rest(using teamwin recovery). Now my phone just comes up with the samsung galaxy s6 startup screen. I have tried to flash custom roms onto my device. However it still says that my phone has no OS on it. I recently figured out my potential build number too, as i before had no way of finding out.
NOTES: The only things i have access to are recovery mode and download mode. I have no backups.
Thankyou for your help
Download the firmware for your variant of S6 and use Odin to install while in Download Mode. Tons of tutorials and information in the forums here for your phone.
If that's over your head, use Samsung's Smart Switch for PC and use the emergency recovery option.
I would recommend getting familiar with Odin though if you want to play with your phone. It's a great tool and will be able to fix most any issue like this.