Related
This really really pi##es me off, as where I live I get 1x data, & usually use my home wireless (wifi).
Recieved the pro, and activated it. It seems disabled by being activated by alltel. I even stumped the blackberry adept person at the local store enough that they switched out the phone, I walked to next door (motel) used the free wireless (to prove the wireless would even function) then let him activate it and headed home (30+ miles into the wilderness). got home and again I cant get Crap wifi to work.
Home is wireless b, it connects, can be seen on the 'simple' 2 wire wireless appliance but the PRO, will not see or try to send data through it. turned off security and everything on the wireless for testing. I can check, but I know the pass for the motel, and I could try again, but am definitely sure that this AINT the issue--> again the phone wouldnt connect at the motel (least not the pre exchanged one) with me or the rep at Altel either, while it was activated and on alltel.
who to call? Any help out there?
my 6800 will still wifi, at anyplace there is a signal and that I know the passcodes or is open.
yes I asked this, at alltel-howard forums, but would think you guys here know more (on second thought, when I remembered about all the stuff you do here, I know I probably should've posted here 1st, but Im kinda mad at the moment!)
Pretty adept at computers, I do IS as my real job, anything I can do to help trouble shoot? yeah the 6800 has been flashed & I even noobed around with cooking a few time. appreciate any help you guys
i Have a touch pro and a touch diamond, both under 2 weeks old and the wifi works fine with both of them, maybe you should try a custom rom and see if they changes anything. but there is no reason it shouldnt work with the stock rom
goonygugle said:
i Have a touch pro and a touch diamond, both under 2 weeks old and the wifi works fine with both of them, maybe you should try a custom rom and see if they changes anything. but there is no reason it shouldnt work with the stock rom
Click to expand...
Click to collapse
goony,
Is it an Alltel? are you positive that wifi is working, not the "data" connection with alltel towers (cell call)? My proof is that if I goto my basment, I have no cell service so not any data connction, ONLY WIFI (that is where my wireless router is. that is when I found out the 1st time. Everything else looks right, on the phone it says it is connected, on the router I can see it on the connected devices list.
I have my issue that I believe, that it is some setting that Alltel is setting... like I said the phone would connect via wifi until the phone activated. When I activated (full unlimited data package is on this phone) the phone fully rebooted on its own, 3 times as if getting updated via data plan. Im not talking about the 1st time turn on customizations, those were done before I tested the wifi at the motel lobby... For instance, the volume control buttons - the display app were obviously modified, I am not positive what else was.
I'd LOVE to try custom rom, if I wasnt right in the period of time I can get my money back, or not. after that I will...
yes they are alltel, and to test the wifi i just connected it to my router and then turned of my alltel data and it stayed connected so i am positive the wifi works. you can still use a custom rom under your return period, if you want to return just relock it.
I wanted to double check myself sting to make sure i was realy getting wifi, so i connected and went to speedtest.net and did a speed test and sure enough it showed my isp as roadrunner(my home provider). Have you had this problem with multiple phones? are you checking the internet option when it connects? and do you have it diconnected from the pc? my wifi wont work on my diamond hooked to a pc.
Has nothing to do with alltel. Maybe with the rom or the phone. Now I hope you're not waiting for a pop up to show itself on the main screen asking if you want to connect because you could wait forever. Go to comm manager enable wifi/ go to start->settings->connections->wifi and make sure options are set to "all available." If you can even see wireless networks on the list, the wifi is functioning correctly and there is a router settings conflict. If you don't see networks on that list in wifi, then there is a rom/hardware problem.
Sweeny Russ said:
Has nothing to do with alltel. Maybe with the rom or the phone. Now I hope you're not waiting for a pop up to show itself on the main screen asking if you want to connect because you could wait forever. Go to comm manager enable wifi/ go to start->settings->connections->wifi and make sure options are set to "all available." If you can even see wireless networks on the list, the wifi is functioning correctly and there is a router settings conflict. If you don't see networks on that list in wifi, then there is a rom/hardware problem.
Click to expand...
Click to collapse
Hey thanks!
But, it is the Stock shipped rom, I have my HTC 6800 right next to this one, connected and surfing the web, both show up when in the home WIFI router config as connected, yet the pro sends NO DATA to ie or opera, (cant locate any webpages) or any app that uses internet/data.Unless there is something I need to do with PRO that I never had to do with the 6800 (mogul) that I just flashed back to stock shipped rom, ready to sell on ebay...
what I dont know is, well, most of the people wifi to tether a laptop or something, I dont! Sure that will be neat in the future, but RIGHT NOW, Just I use WIFI when I am at home and dont even have signal or evdo near me... (remote locations that I live, the tower coverage sucks out here in ks...) Got to fix this soon, or this Beyotch is going back to alltel.
Another thing, this bad boy pulled this crap, as soon as alltel activated the device (so I could use it as my phone!) when it was NOT activated, the wifi worked (proven at the motel next door to the Alltel store I exchanged this phone). BTW, I was able to test it on the 1st phone shipped to me, while it was activated, it pulled the same thing, when he unactivated the phone, we could almost pickup the wifi from the motel next door (distance was the only issue I think now looking back) but seemed like a chip problem.
Where I got screwed was we believed the wifi to be bad on the 1st phone. So he got out a new phone, and before we activated it, I went and tested the wifi, it worked on the 2nd phone. I thought wall was fine, it worked. then I had him activate it, assuming that proved I will be able to use the wifi. So I leave the store thinking OK wifi works. I get home, and again unable to use my home networking wifi to open web or apps. unacceptable. Yet the 6800 does and still works flawlessly (as long as you slide the wifi sider on side to on {inside joke}).
follw me better now?
What brand router do you have? How many devices are wireless? And it connects to other locations but are you sending and recieving data? Try this link http://www.wmwifirouter.com/trial/ and install on 6800 if you are not normally around hotspots. This will test the t-pro's ability to send and recieve information via wifi. Now it is sounding like an IP address conflict.
Sweeny Russ said:
What brand router do you have? How many devices are wireless? And it connects to other locations but are you sending and recieving data? Try this link http://www.wmwifirouter.com/trial/ and install on 6800 if you are not normally around hotspots. This will test the t-pro's ability to send and recieve information via wifi. Now it is sounding like an IP address conflict.
Click to expand...
Click to collapse
Sweeny, Im in the houshold router (made by 2wire) I can see it (the Pro as well as the 6800) each get an ip. (I work In IT, so I know what you are talking about in ip conflicts, all that.) I have even set the router to manually setup IPs now, then set the ip inside the Pro, as well as the default gateway, dns all that.) I'm telling ya, it is more like it doesnt know the DNS or the gateway (just like I disable internet surfing on the computers at work that I still must use networking)
I copied the DNS and everything from a working laptop (ipconfig -all) on a wireless laptop today, and still as if it was disabled.
This weekend i will test the dang thing tethering with my notebook i'll bring home from work (use the pro as the internet access). if it wont tether either, then I think allHell is doing something. Again if the device is DE-Activated I will wifi... {I'll bet you $$}. I might call alltel, tomarrow night, and try that. I'll have them inactivate it and if it suddenly works, then the question is, what do I do with alltel? they dont have the right to disable hotspot usage do they?
I feel I feel the presence of VERIZON already in Alltel, Luke is turning to the dark side. NOOOOOOOOOOOOOOOOOOOOOOOOO!
You all thought I was off my crock...
http://www.htcwiki.com/thread/2073117/Touch+Pro+WiFi?t=anon lots of folks posting same problems it looks like.
Need that group of people who can create a kitchen, and hcak tomtoms, to help us with this PLEASE!
No I don't, think you're off your crock I just know how frustrating problems like this can be. Here is what I suggest you do. And if this doesn't work exchange the phone or try a different router. I know what you're thinking....not the router. Truth is might be. Its just like wireless adapters in wii's and ps3's they simply will not work with a handfull of routers even though not clearly documented.
Anyway, change router to static Ip's, safer anyway.
Specifiy gateway, primary and secondary dns, and limit your ip's within 100 available obtainables. Use a 64 bit wep encryption. Change the channel of your router's broadcast to 1 or 11. Use only simple gateway ip range, not pure server. If you need me to provide you with example settings then pm me because I do not want to broadcast them via forum
Good luck.
Dont take this the wrong way....but are you positive that you are disabling the DATA Connection in Comm Manager?
I have had the alltel touch pro since the second they hit the store. I have used 3 of them since and they all work perfectly on wifi. I primarily use wifi and use diamond tweak to activate the wifi standby so wifi stays connected in standby like data does by default and use modaco nodata to disable data as I live in a house that gets a very lowsignal from the tower and eats my battery superfast if I use data. I have a router in the house and one in my office detached from my home and when I had my mogul it often would not switch between routers successfully requiring me to manually connect more often than not. All the Touch Pros connect superfast and switch automatically. I am running mightyrom 4.12 and telus radio which is light years better than stock with signal, speed and batterylife, but even when I was on stock for about 3 months there were absolutely no wifi issues.
ACoolGuy said:
Dont take this the wrong way....but are you positive that you are disabling the DATA Connection in Comm Manager?
Click to expand...
Click to collapse
Not sure which of us you are asking this queston of...
Thanks, for the help so far...
I was having the same issue (Alltel and all).
I found this post in the MS forums:
http://social.microsoft.com/Forums/en-US/windowsmobile/thread/561f18a8-5f64-4359-957e-adb003229f1d
Essentially, it says to "Navigate to START/SETTINGS/Connections Tab/Connections icon/Advanced Tab
Press Select Networks Button
At the top it says "Programs that automatically connect to the Internet should connect using:"
You want to press on the drop down and choose My Work Network"
You need to tell the system that the Work Network connects to the internet as well. While this doesn't seem like the ideal solution (there should be a faster way to switch it, or it should do it automatically depending on location), it did work for me. I'm sure there's a much more sleek solution out there, though.
Btw... I hope I'm posting this correctly. I'm more a reader than a poster.
Ooop... one more thing. Its non-sleekatude rests with the fact that when you want to switch between wifi and your data plan, you have to go through the whole process, and switch the active network from My Work Network to Alltell Wireless. This is where I was hoping for a better solution. As I say, it does work, but it seems like it should involve less hassle.
Might add this to the WIKI, I dunno but there could be a few more thousand users out there on ATT or SWB using the modem/routers that they shipped when you got DSL more than a year ago...
Everyone that has the older 2 wire brand, wifi modem/router that came with SBC (now ATT). Wierd I know. But Mine has just been replaced by the newer version of that modem/router. and I will be dammed, it works. but the phone wont work with the older ones. Mine was the 2WIRE 1000hw model. they are shipping new models, and finally the phone will work with the wifi on that new router.
Thought it might be nice to know...
alltel model uses wifi just fine
My TP from alltel works just fine with wi-fi all i ever do is turn it on and then select which connection i want to make ...really quite nice...maybe you need to exchange yours...
On further testing of my own setup, I'm thinking my issue was the router. I had done several fixes all at once, and cited the wrong fix as the working one. I happened to reset my router at the same time I did the above suggested fix.
I thought it had to be the device, as my HTC Apache never had an issue with the router, but after resetting the router, and going back to the original settings on the TP, I'm having no problems connecting to the network. I wish I could pinpoint the exact conflict between the two, but now that I have it working, I'm not messing with it.
My suggestion is to back up your router settings, reset the router, and see what happens. Or test your wifi on someone else's network.
Isolating a network conflict can be one of the least fun things to do, but from everything I've seen here and in other forums (and my experience with it) I'm going to say that's the issue, and not the TP alone.
I don't think it likes your router being wireless B, you should try it on a wireless G router before Ebaying it.
I had the issues with my phone (bought outright from Bell, unlocked for use with Rogers)
To connect to Wifi, try the following, and report back:
1) Disconnect the WiFi entirely (as in un-check the on button)
2) Turn WiFi back on
3) When your WiFi hotspot becomes available, instead of just tapping to connect, TAP AND HOLD the name of your hotspot, and a prompt will appear asking you to connect or forget the network.
4) Click "Forget network"
5) Toggle WiFi on and off one more time
6) Once your hotspot is found, TAP AND HOLD until a prompt comes up asking you to connect.
Press connect, and voila, your wifi should be working like a charm.
My situation:
1) Bell Atrix (Build OLYLA_U4_0.37.4, Android 2.2.1 obvs)
2) Linksys WRT150N Router 2.4GHz using WPA2 Personal passcode
3) Unlocked + working on Rogers with cell unlock code.
interesting, i think i tried that with my att atrix (both stock and the leaked firmware) already, and it didnt produce any useful results. ill retry it later today, and post the new results.
I wonder why it worked for me. It can't be an issue with sims blocking access personally I think it is the router frequency causing issues.
Sent from my MB860 using XDA App
hoesntrix said:
I had the issues with my phone (bought outright from Bell, unlocked for use with Rogers)
Click to expand...
Click to collapse
I don't have any wifi issues with my unlocked Bell Atrix on Rogers. I'm using a different router though, and I also did a factory reset before power cycling and unlocking my Atrix. The Atrix also provisioned the APN settings when I unlocked the phone with my Rogers SIM in it.
It doesn't get any easier than that.
heh lucky you. well judging from the dmesg i did with wifi working and wifi not working, basically the only difference is
Code:
Link Down
Invalid ioctl data=-22
wl_iw_set_wap Invalid ioctl data=-22
Set ISCAN for wl_iw_iscan failed with -22
so im pretty sure there has to come some command from the sim/carrier that issues the -22 "command" , which than fails everything
oh and hoesntrix, i just remembered one more thing, namely:
after inserting the sim, the WiFi manager where i would have to do your steps, doesnt find any networks, or in fact it finds networks for like 1 second and than they disappear. and it cant be a router frequency issue if it works without sim after a factory restore...
im thinking some file gets changed in the /data directory/partition that gets restored with a factory wipe. since if you change things in the /system directory/partition they stay changed even after the factory restore.
my wifi was working until i restored parameters with Titanium backup from my Defy....
perhaps nothing to do with the other problem but who knows....
That would make sense. I really wish moto would not lock down the boot loader im just glad my wifi is working
Sent from my MB860 using XDA App
woah. This worked for me. Brilliant. Thanks
Works for me.......thanks a great deal
You may have noticed, especially if you've got the new Free Wifi Calling feature from T-Mobile, that WiFi Calling is a BATTERY HOG. Worse, it hogs battery even when disabled. You can verify it's Hogginess even when disabled by noting it will almost always be the top APP in history using SystemPanel. It's incredibly badly coded, and if you've got a Rom with Wifi Calling on it, and you've had bad battery life, now you know WHY.
But, really, with the new Free Wifi Calling feature, we shouldn't have to kill it entirely.
You can freeze it with Titanium Backup, but that's a hassle. Likewise using Bloater to uninstall/reinstall it all the time. Wouldn't it be nice just to have a desktop widget to do it for you? Or be able to hook it into your "Home Wifi" profile, so it's always enabled at home, and then have it turned off as soon as you're no longer near your home wifi?
Thanks to user AntonX in this thread , I came across a method to simply kill the app at the system level until needed. Still not convenient. So, I whipped up some Tasker scripts which will help the situation.
This assumes you have Tasker, as well as a basic knowledge of how to use it. Here are your the TASKS to create (Don't create any profiles unless you want to)
You also need to have the Locale Execute plugin, which is free.
NOTE: For this to work correctly, leave the slider set to ENABLE in the wifi calling app, and disable the feature using the Tasker widget and not inside the app!
Create a Task "Disable Wifi Calling"
1. Variable Set %WIFIWASON to YES If %WIFI ~ on
2. Wifi Set Off
3. Wait 5 Seconds If %WIFIWASON ~ YES
4. Execute @!pm disable com.android.kineto
5. Wifi Set On If %WIFIWASON ~YES
6. Variable Clear %WIFIWASON
7. Variable Clear %WIFICALLING
Create a Task: "Enable Wifi Calling"
1. WiFi Set On
2. Plugin:Execute @!pm enable com.android.kineto
3. Wait 5 Seconds
4. Load App Wifi Calling
5. Variable Set %WIFICALLING to YES
Create a Task "Toggle Wifi Calling"
1. Perform Task Disable WIFI Calling If %WIFICALLING ~ YES
2. Perform Task Enable WIFI Calling If %WIFICALLING |~ YES
TO USE:
Add a Tasker Widget to your homescreen for the "Toggle Wifi Calling" task.
What is going on:
Disable script will check if wifi is on at the time it is executed. It has to turn Wifi OFF so we get a clean disconnect from the network and the taskbar Icon goes away before killing the Wifi Calling app. If Wifi was on beforehand, it turns it back on.
Enable script will make sure wifi is enabled, and give it time to connect, and then load the application since sometimes it won't activate on its own without loading manually.
These tasks are intended to be linked to Tasker widgets on your homescreen, but you can call them from location based profiles or whatever.
Now, when Wifi Calling is OFF, it is REALLY off, and not just sitting around, unused, sucking up your battery. With a little more work, this could probably be turned into a single "Toggle" task, but that's an exercise for someone who has slept and doesn't have work in 5 hours. Comments/Improvements welcome.
Update 1:
Added instructions for creating a Toggle widget at the same time.
Streamlined Tasks.
Planned Features:
1. Automatically disable WIFI calling app once WIFI has been disconnected to save battery. Seems to need a block to prevent the state from triggering during processing of the disable/enable tasks, as it breaks functionality. I'm sure it is trivial but I have a limited attention span.
2. Automatically enable WIFI calling app if currently connected to WIFI *and* cell has no signal for longer than a set time. (%CELLSIG)
3. [not possible?] - Audible warning that WIFI signal is getting low and you are currently on a call. Is there any way to read current WIFI signal strength with Tasker?
Very good guide and a great idea.. if only we could get a better coded wifi calling app... or one for cm7
Sent from a cell tower to the XDA server to you.
I love the idea, but I can't quite seem to get it working. When I run the "disable" task, it eventually turns WiFi back on and WiFi calling gets re-enabled.
Then, a while later I get an "app not responding" warning from the Android system for the execute locale plugin (I can select Force Close or Wait).
Also, what is the best way to grant SU permissions to the plugin in the SU application? I have never been prompted to allow it. To test it out, I just temporarily granted access to everything...
Thanks!
lotherius,
I follow on the G2X forums. And you know how the G2x & MIUI Roms can't seem to get Wifi Calling to work consistently. I noticed that if I can get the Wifi Calling app to stay turned OFF it allowed my Sim card to not get the "Invalid Sim" error and then I was able to get wifi calling to work again even after reboots. Do you think by any chance that this script could help cure our Wifi Calling issue with MIUI Roms??? And is there a way to make a flashable zip of this for us Noobs? Thanks Again.
GFam4 said:
lotherius,
I follow on the G2X forums. And you know how the G2x & MIUI Roms can't seem to get Wifi Calling to work consistently. I noticed that if I can get the Wifi Calling app to stay turned OFF it allowed my Sim card to not get the "Invalid Sim" error and then I was able to get wifi calling to work again even after reboots. Do you think by any chance that this script could help cure our Wifi Calling issue with MIUI Roms??? And is there a way to make a flashable zip of this for us Noobs? Thanks Again.
Click to expand...
Click to collapse
Nope, this script wouldn't help with that. The problem on MIUI roms on the G2X is due to the operator (T-Mobile for most) not sending the phone # directly to the SIM card when it is activated. Some SIM cards have it, typically older ones, so it works. Those without, however, find that it doesn't work.
Supposedly you can manually program the SIM by using a phone that supports doing so, but I haven't checked to see if that would fix the problem.
Also I no longer bother with this on the G2X as it appears that while wifi calling still uses *some* battery when not active, it's not the battery hog it was back on the Vibrant.
Lotherius,
I had an HD2 running MIUI with Wifi Calling working before the G2X. The is the hack/mod that this guy TyTung did to get wifi calling to work for the HD2. http://forum.xda-developers.com/showthread.php?t=1038784 You think something like this can be used for the G2X to get wifi calling working?
GFam4 said:
Lotherius,
I had an HD2 running MIUI with Wifi Calling working before the G2X. The is the hack/mod that this guy TyTung did to get wifi calling to work for the HD2. http://forum.xda-developers.com/showthread.php?t=1038784 You think something like this can be used for the G2X to get wifi calling working?
Click to expand...
Click to collapse
WiFi Calling is really picky about the network information being accurate. I'm surprised that they got it working on the HD2...
The best fix for it on MIUI on the G2X would depend on fixing MIUI itself, since the RIL is correct -- the G2X doesn't allow you to change the RIL so it isn't affected. In the case of MIUI, older SIM cards typically work better than new ones.
The issue comes down to the ability to read the network information from the SIM card. If that data has been programmed to your SIM card, then it might work. If it has not been programmed to your SIM card, then it won't work.
So basically... not saying it's impossible to get it working on G2X/MIUI, but it is more likely to require a fix to MIUI rather than to Wifi Calling.
lotherius said:
WiFi Calling is really picky about the network information being accurate. I'm surprised that they got it working on the HD2...
The best fix for it on MIUI on the G2X would depend on fixing MIUI itself, since the RIL is correct -- the G2X doesn't allow you to change the RIL so it isn't affected. In the case of MIUI, older SIM cards typically work better than new ones.
The issue comes down to the ability to read the network information from the SIM card. If that data has been programmed to your SIM card, then it might work. If it has not been programmed to your SIM card, then it won't work.
So basically... not saying it's impossible to get it working on G2X/MIUI, but it is more likely to require a fix to MIUI rather than to Wifi Calling.
Click to expand...
Click to collapse
I wish i knew what Lib's and RIL's that I can swap from a CM7 Rom (Weapon G2X, Eaglesblood, or TSUGI) and push it via Root Explorer. I did this on my Hd2 and had wifi calling working. Can't this method work to get wifi calling working on G2X. Sorry I know this is off topic. But I even had Wifi Calling on your TSUGI ROM. You wouldn't happen to know what Lib's & Ril's on your TSUGI Rom are responsible for Wifi Calling to be enabled?
Is battery life really bad with wifi calling for you guys? I use it nearly 24/7 on my phone, and get fantastic battery life. Like way better than I did without it.
Of course, I'm on the clearly superior HTC G2, but still
I've been toying with this, but anytime I force Wifi calling to disable (by killing the app or disabling kineto), restarting Wifi calling says I'm not registered with the T-Mobile network (sure) and won't connect (even after clicking Register) until I reboot the phone.
Any tips?
Hi,
My apologies if this is the incorrect section. I know the Virgin Mobile SGS2 is NOT the I9100 model, however the correct phone was not listed on this site (nearest is the T-Mobile model, but the options differ on their phone).
I'm experiencing an issue with trying to enable the wireless hotspot option for my phone. In every instance I have tried, I have received errors that ad-hoc failed to start and related problems. Let me make it clear that this version of the samsung galaxy DOES NOT have the option to turn on wireless tethering in the native settings menu (it's simply not there). My carrier most likely hid the option because it is an extra $15 a month to use the feature. I can, however, attempt to start the hotspot service with a third party app, but it runs for no more than 3 seconds and I get error 67:" Unable to connect to data network, turning off Hotspot..."
My phone is rooted and I have full access to edit system files (I did so to remove the ear-piercing camera shutter noise). I am using the stock rom and do not intend to flash a different rom to this phone. To lessen redundant suggestions that have been said hundreds of times and have failed to fix my issue, here is everything I have done:
Attempted to use FoxFi. All this app does is start the native hotspot capability on your phone, so I got the same error 67. No network connection. The network only appears for a split second when enabling the native hotspot setting, but since the phone turns it off, I can't connect to it.
Attempted to use Barnacle. I receive the error "Could not set ad-hoc mode of wlan0: Operation not supported on transport endpoint."
Attempted to use Wifi Tether for Rooted Users (for some reason this app is listed as "Not Compatible" for my phone in Google Play). Again, I receive an error that setting ad-hoc failed. All other services start successfully though, but the network does not appear for my PC to connect to.
Checked to make sure my 3G/4G is actually on and functioning.
Despite all this, I CAN utilize the USB tether feature just fine in PdaNet. It's the wireless hotspot that is eluding me. I know that flashing a different rom can get me around this issue, but I really would prefer to resolve this problem without doing that if it's possible. One thread I read said something about editing a .db file, but it was for an HTC phone and I'm a little wary to try it on my phone. I'm sorry for coming off rather cross, but I'm just a bit frustrated as every solution I find never works. It seems like this would be a simple thing to do. Is there a system file I can edit that will allow my phone to enable its native hotspot capabilities? Or something that will resolve the ad-hoc issue? Or am I blindly over-looking something obvious? If nothing will work except for flashing, then hey, at least I tried. It's not going to kill me if I can't get the wireless tethering to work, but it was one of the reasons I wanted to root my phone.
Any help would be greatly appreciated. Thanks in advance!
I randomly figured out the problem myself. Downloaded something on a whim and it actually worked. Let me go through each step so anyone else who has this same problem can try this out.
The majority of what I did can be followed here:
*Can't post the link. Thank you, forum restrictions... It's from a website called "highonandroid.com" so google that with the appropriate keywords (wifi tether, android, etc.).
But in case the link goes dead or something like that, here is a step-by-step reiteration:
1. Download Trev-E's mod for the Wifi Tether for Root Users app. I have the exact version I used attached to this post.
2. Install it, and immediately go to settings and make the following adjustments:
- Change device profile to "Generic ICS/JB (wlan0)."
- Change setup-method to "Netd-Ndc (master)."
- Tick the option "Send Netd Max Client Cmd."
- Tick "Wifi driver reload." The second one did not work for me, but try it if the first reload does nothing.
- Although the original tutorial says to tick "MSS clamping," this option is not available on my phone. But this did not stop the app from working.
3. Exit settings and hit the wifi icon. Fingers crossed it works for you!
After doing that, the app showed no errors in the log, the network name appeared on my computer, and I was able to connect effortlessly. Most importantly, the internet worked!
Also, enabling/disabling the tether DID NOT break my phone's wifi or 3G service. Everything ran fine when I stopped using the app and I didn't need to restart my phone. Putting this out there because I know some phones will trip out when enabling this feature. Good luck! And big thanks to xda's Trev-E for the app.
Thank you! That was driving me nuts trying to tether my GS2 to my tablet. I dont have the clamping option either but its working perfectly when nothing else has.
Nice instructions. I rooted my phone today (root virgin), downloaded the trev-e you have linked and got it to work. (Virgin Mobile Samsung Galaxy SII 4G)
I then tried to use encryption and the phone was just not having it, the internet connection wouldn't work anymore (laptop was connected but said there was no internet access). Frooze up the phone, had to reboot, frooze again, reboot, turn the feature off, freeze, reboot, pull battery etc etc. Finally have it working again with encryption off.
Pretty happy to have tethering working, but wish I could encrypt it haha.
Do I have the wrong TrevE using the stock ROM? (using the TrevE linked in this thread).
Now to learn what else to do in the wonderful world of being rooted...
*** EDIT- Looks like installing busybox fixed the issue!!
Thanks!
Awesome work, follow the instructions if you have virgin mobile it will work perfectly
Wifi Calling/Texts info for other countries​
This is just some info I found out while traveling around Mexico. I would imagine it would work in other countries as well.
Sprint is still working on this, but they really want it to work so they don't have to unlock your phone Sim Card. They will still unlock your Sim if you meet the criteria. Google that info, it's in these forums. Mine is unlocked BTW.
So this is what it took to get Wifi Calling/texts to work:
1. Turn off Data
2. Turn off Location
3. Turn on Wifi - you'll need a pretty strong signal for this to work. Or else it will keep tripping out.
4. Turn on Wifi Calling - You should probably do this before traveling to another country to get it all set up. It uses data and requires a reboot to work - if I remember right.
4a. You'll need to enter an actual address. This is required for 9-1-1 which is a requirement for Wifi Calling. It's all part of the agreement you'll need to acknowledge when setting it up.
5. While out of country, and with Wifi Calling turned on, Make sure the "Locate me" box is not checked, then enter the address you entered earlier in this format:
1234 Street name,
Anytown, AA 123456
MAKE SURE the comma's are in the right place!! Or it won't accept it.
5a. You may also need to go to Settings>Wifi Calling and select the Wifi You'll be connected to.
The address/location seemed to be the biggest issue. Once I figured that out, all was working great.
I'm doing this all from memory, so if anybody has any questions or comments that they've found, Please put them here. This is a great FREE feature that allows us to travel elsewhere and still use our phones. Obviously where you go requires Wifi for this to work.