Hello everyone
I have an old GS3 and time is starting to take it's toll on performance. Therefore I am thinking of rooting it to improve performance. (I ve already done pre rooting stuff to improve performance like disabling bloatware and turning off graphics from developer options).
The problem is I belong in the category, if you are not sure how to do it don't do it! So I want to be careful about it.
I am mot a multimedia heavy type of guy so half of my 8 Gb storage is free.
What I want to do is intstall CM11 (to upgrade from android 4.3 to 4.4.4) and afterwards add a 4 Gb SD card and use it as RAM.
I know I first have to start with backing up contacts and Data.
Then I plan on installing CM11 with the steps from that vidoe/guide:
How to install CyanogenMod 11 on Samsung Galaxy s3 - Papp Ferencz [Can't post URL]
1. Download snapshot: cm-11-20141115-SNAPSHOT-M12-i9300.zip (212.87 MB)
[A new snapshot just came up at CM11 site, cm-11-20150901-SNAPSHOT-XNG3CAO3G0-i9300.zip, I m thinking of using this instead.]
2. Google and download android 4.4.4 gapps
3. Copy the files on the internal memory.
4. Boot in recovery more: Home+Power+Volume_Up
5. Wipe Data/Factory reset
6. Wipe Cache partition
7. Go to Advanced mode and wipe Dalvik cache
8. Install zip -> Install from Sd card -> 0\ -> cm-11-…
9. And the gapps-kk-20140105-signed
Will this, to the best of your knowledge (I know there are no guarantees) do it right?
Then I plan to use an 4 GB class 10 (probably) SD card and use that guide
site androidpit /increase-phone-ram [can't post url]
[Scroll to the second section for details:
How to increase your RAM when you have root access
In this section we're going to explain how to increase your RAM with a rooted device. The trick involves creating a partition on your SD card, which will act as a secondary source of RAM. To do this, we will be using the ROEHSOFT RAM Expander (SWAP) app ... ] etc
Do you guys also know if this will work?
I m open to alternative implementations as well if you guys have tested something and are confident it will owrk on the I9300 int version.
Thanks a lot for your help
You should post this in q&a but if u want to install cm u don't need to root just flash cwm and install cm from there
Thanks, I ll repost at the Q&A section.
Also I don't want just to install CM but also increase RAM to boost performance and I need to be rooted for that I think.
Hi guys .. I've been trying to root my phone since 5 hours ago !! , result, nothing.
Does Someone know about it ? Because there is no enough space to install apps , The phone I can say is fast , but it's useless if you can't install some apps , it gets full memory after installed 5 or 6 apps . please if someone knows about it , just tell me because II should use link2sd to get more space , but I couldn't do that !!
root huawei mediapad t2 7.0 pro model PLE-701L. and custom recovery mode TWRP 3.0.0-0
NOT WORK
FAMAROOT
KINKO
KINKROOT
ONECLICKROOT
But This root work
Ok this work for huawei mediapad t2 7.0 pro or ple-701l-a504v2
samindex said:
really need your help. I want root huawei mediapad t2 7.0 pro model PLE-701L pls. and want custom recovery mode pls
NOT WORK
FAMAROOT
KINKO
KINKROOT
ONECLICKROOT
Click to expand...
Click to collapse
Its easy . just install a compatible recovery through fastboot and then flash superSu zip to root it.
You can refer here: http://rootoreviews.com/root-Huawei-MediaPad-T2-7.0-Pro-install-twrp-custom-recovery
Hit thanks if helped.
https://youtu.be/9R4OWDtumzU root work
samindex said:
really need your help. I want root huawei mediapad t2 7.0 pro model PLE-701L pls. and want custom recovery mode pls
NOT WORK
FAMAROOT
KINKO
KINKROOT
ONECLICKROOT
Click to expand...
Click to collapse
:good::good:
Thanks for help. But no work for me. I used this root https://youtu.be/9R4OWDtumzU
pratyaksh tyagi said:
Its easy . just install a compatible recovery through fastboot and then flash superSu zip to root it.
You can refer here: http://rootoreviews.com/root-Huawei-MediaPad-T2-7.0-Pro-install-twrp-custom-recovery
Hit thanks if helped.
Click to expand...
Click to collapse
:good::good:
Root work
https://youtu.be/9R4OWDtumzU
Root Huawei M2 7.0 ple-703l
has anyone tried to root a huawei m2 7.0 ple-703l? does the same ple-701 procedure work? suggestions?
thx
i have no idea who developed it, but i could use this TWRP image, twrp-ple-701l-a504v2.img. just try "fastboot boot twrp-ple-701l-a504v2.img" first without flashing it to the device. i recommend you make backups of all the partitions (EFS, system, recovery, boot) before you start rooting or modifying the device.
with this TWRP, you can simply install SuperSU as usual with no hassle.
i have removed unnecessary preinstalled apps such as;
Books
CloudPrint
Drive
GoogleTTS
Hangouts
HwFileManager
HwMediaCenter
HwMirror
HwNotePad
HwPhoneService
HwVPlayer
iWnnIME
iWnnIME_Kbd_Old
LatinIME
Magnifier
Newsstand
OpenWnn
PlusOne
PrintSpooler
talkback
Videos
these are scattered in /system/app, /system/dellapp and /system/priv-app somehow.
and changed "low memory killer" settings as followed;
Foreground app: 72MB > 25MB
Visible app: 90MB > 35MB
Secondary server: 108MB > 55MB
Hidden app: 126MB > 70MB
Content provider: 144MB > 100MB
Empty app: 180MB > 150MB
also changed CPU gov to "Performance" both for big and little, and set min CPU frequency of big at 998Mhz.
after these changes, my T2 7 is really snappy now.
could t2 7.0 pro and t2 10.0 pro using the same twrp to root?
thank you in advance.
peter
redmiuser,
I think you can use 7" twrp version.
I don't have 10", so cannot check, but I successfuly used stock recovery from 10" to boot 7" (vice versa for your situation)
unlock your bootloader and fastboot boot.img, recovery.img and system.img
your phone will be totally clean
watch this video https://www.youtube.com/watch?v=AIyEO4uoWLc
Can anyone clarify what the rooting process does? I am very new to the concept of rooting.
I recently picked up the T2 7.0 Pro, Model PLE-701L.
I have no interest in using it as a phone, simple as an E-Reader. I am a bit concerned about messing with it as it came from Taiwan with English google play setup. Not certain if rooting would remove this.
My only real need for it would be google play so I can load Moon Reader Pro, wi-fi support and the fingerprint reader.
It has a ton of bloatware on it, given it only has 16GB of base memory, I will be running into issue soon as Android 5.1.1 (what it currently has) does not support reading EPUB's off a micro SD card. Hopefully through rooting I could clean out the numerous apps that are bogging it down and taking up storage.
Thanks!
Good morning
I recentily bought this tablet, but i cannot unlock the bootloader beacause on the emui web page does not appear the download button where was possible obtain the unlock code. Have a suggestion? Thanks a lot
Inviato dal mio PLE-701L utilizzando Tapatalk
I just bought the ple 703l model. Can anyone please tell me how to root it?
How to root ple 703l?
Hello!
I have this "F" tab and its very hard to find any custom rom that works.
I tried install some that was to the "I" version, they dont even install.....
I managed install Cyanogenmod....but I would like to have Android 6 or never.
Is this even possible?
Why I want 6 is the adopted storage...the main problem with this tablet is the too small 8Gb rom memory!
I want use SD card to applications....
Im a newbie with rooting etc...managed to install TRWP and now this cyanogenmod, but now I lost root access too
Nevermind!
Asked in another forum also about this and the answer was that my tablet too weak to run Android 6+...
I got root just booted to TRPW and choosed reebot and then it asked if I want root...choosed yes!
After that tablet started and it asked me to install super su from playstore, since I dont even have playstore I just downloaded SuperSu app to my phone and did a backup APK that I sent via bluethoot to this tablet. Voila tablet rooted again.
Then installed Link2SD app (in the same way)...
Did partion my SD card in my computer, first as FAT and second as EXT4....
Now I have a lot of memory to install apps in my tablet!
Hello, the other day I flashed my umidigi A7 pro, I was able to install lineage os with some problems that I managed to solve, but as you know lineage os does not have google gapps installed and when I tried to install gapps with twrp I get error 70.
search for many ways, one of them is to repair system partition by deleting, but when i want to do it, the system partition does not appear in the deletion, all partitions except system partition appear.
I hope you help me
- I am using a translator.