Help with bricked phone - Odin not recognizing - Galaxy S6 Edge Q&A, Help & Troubleshooting

I have a bricked Galaxy S6 Edge. Here's the scenario:
- completely unresponsive when unplugged
- boot loop when plugged in
- cannot enter recovery mode
- can enter download mode when plugged in, but the biggest problem of all...
- my computer (and Odin) doesn't see it at all
Odin recognizes my old Galaxy S4 just fine, using the same computer, same USB cable, same USB port, etc., so we can rule out a problem with any of those.
Is there anything that can be done?

When you get into download mode, if you unplug the phone then plug it back in, does it still do nothing?
Sent from my SM-G925F using XDA-Developers mobile app

thatsupnow said:
When you get into download mode, if you unplug the phone then plug it back in, does it still do nothing?
Sent from my SM-G925F using XDA-Developers mobile app
Click to expand...
Click to collapse
If I put it into download mode while it's plugged in, and then unplug it, it stays in download mode. But it will not enter download mode when it's already unplugged.
The computer doesn't see it whether I put it into download mode before or after I connect it to the computer.

Damn...
Sent from my SM-G925F using XDA-Developers mobile app

Related

[Q] how to get Odin to read my GS3?

I have the drivers installed and they work great whenever my phone is not in download mode or odin mode. As soon as i go into download mode the drivers don't recognize it. Odin has nothing in the ID:COM. what am I doing wrong?
Is it still connected to the same usb connector, and samsung kies finds it ?
I had problems with the "non orginal" usb a to mini b cable so i took the orginal one.
And you need to have the usb drivers for kies installed, and when you try odin
make sure that kiestray and keis is terminated and nothing else communicating
with the device and put the phone in download menu by holding "volume down - home and power" down until it boots into download mode then press volume up now you should be able to connect the phone and it identifies it.
Hope it works out for you.
And have you tried on another pc too ?
thank-you
Sent from my Galaxy Nexus using XDA

Cant connect USB

Hey there.
I am using a custom rom (IMM76D UCLE2) and when I plug in my phone to back up to kies it doesnt find the phone. I have the USB drivers installed.
I noticed at the top its showing connected as a media device. I should be able to see it in my computer???
Any idea
thanks
Unplug the phone.
Reboot pc, start Kies
Put phone in download mode
Connect phone to pc
Also, try recovery mode
^^^ what ranger said
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

Chargin port its not working as a usb in the computer???

Hey guys today i got the samsung galaxy s2 gt-i9100 and the phone works fine but theres something weird happening and is that everytime i plug the phone to the computer it charges but it doesnt let me use the phone like a usb drive i cant acces my phone and in the notification bar it doesnt show the option to mount to usb, and if i put the phone in download mode odin does not recognize the device and everytime i plug the phone its says one of the usb devices attached to this computer has malfunctioned and windows does not recognize it.
Do you know what could it be? is this something than can be fix?
Before you can connect the phone via odin, you need to have the drivers installed. So first thing you need to do is have your computer detect the phone.
-See if the cable is working..if you have another cable, try your luck with that.
-clean the phone's USB port.
-try putting your phone into USB debuhging mode from the settings menu.
-Im assuming your still on stock. Dial *#7284# and on the USB option select PDA. This worked for me while I had trouble on stock.
Sent from my GT-I9100 using xda app-developers app

Help brick!!!

Well was trying mobile odin on my p7500
were trying P7500XWLPD_P7500DBTLP3_P7500XXLQ8_HOME.tar
pressed start and its just keeps rebooting mobile odin shows 0.3 sec a cache.ing done thing and the download mode now not recognizes USB (Tried 3-4USB) so it is not in the USB , or USB driver
Yeah I tried go to recovery mode but it shows the mobile odin 0.3 thing and reboots again
What should I do?
Any help ? Anyway to do this without otg or gtag . Noone experienced this kind of problem ?
It is not the mobile odin that made usb useless thats the cm 10.1 .
Sent from my GT-I9100 using xda app-developers app
enkhtwshn said:
Well was trying mobile odin on my p7500
were trying P7500XWLPD_P7500DBTLP3_P7500XXLQ8_HOME.tar
pressed start and its just keeps rebooting mobile odin shows 0.3 sec a cache.ing done thing and the download mode now not recognizes USB (Tried 3-4USB) so it is not in the USB , or USB driver
Yeah I tried go to recovery mode but it shows the mobile odin 0.3 thing and reboots again
What should I do?
Click to expand...
Click to collapse
My head hurts from trying to understand the above.
Let me see if I can make some sense of it:
You installed Mobile ODIN on your P7500, downloaded the ICS ROM, and tried to install it.
Apparently Mobile ODIN failed and immediately rebooted.
Now the tablet displays something about cache.img during restarts. That means that it's not totally dead, though.
You need to boot it into download mode and use PC ODIN to flash your ROM.
However, while you can get into download mode, your computer doesn't recognize the tablet.
You've tried several USB ports with no change.
You can't boot into recovery since that just gets you Mobile ODIN.
If you boot it into download mode and your PC doesn't recognize the tablet - especially if it doesn't see anything in device manager when you connect it, your cable is bad. Replace it. Then use PC ODIN to flash your ROM.
k1mu said:
My head hurts from trying to understand the above.
Let me see if I can make some sense of it:
You installed Mobile ODIN on your P7500, downloaded the ICS ROM, and tried to install it.
Apparently Mobile ODIN failed and immediately rebooted.
Now the tablet displays something about cache.img during restarts. That means that it's not totally dead, though.
You need to boot it into download mode and use PC ODIN to flash your ROM.
However, while you can get into download mode, your computer doesn't recognize the tablet.
You've tried several USB ports with no change.
You can't boot into recovery since that just gets you Mobile ODIN.
If you boot it into download mode and your PC doesn't recognize the tablet - especially if it doesn't see anything in device manager when you connect it, your cable is bad. Replace it. Then use PC ODIN to flash your ROM.
Click to expand...
Click to collapse
Well I replaced several cables no use . When I plug it in it shows me unknown device . And it doesn't recognise it.
Sent from my GT-I9100 using xda app-developers app
enkhtwshn said:
Well I replaced several cables no use . When I plug it in it shows me unknown device . And it doesn't recognise it.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
you need to have the samsung usb drivers installed
download Samsung Kies and install it, it will also install the drivers

[Q] How To Fix Gt-i9300 that bricked after using odin mobile

Hello
I was trying to install T_CWM_6.0.4.4_I9300 via mobile odin in my S3 Gt-i9300 Android 4.3 but the phone turned off and won't boot at all, no boot no download mode no recovery mode, when I plug it to my windows 7 pc it shows : QHSUSB_DLOAD I've many solution but none works, Please I need help.
by the way when I plug it into charger with no battery it shows a red lamp.
Without download mode you are stuck, try a usb jig.

Categories

Resources