Hi After trying to unlock very many failed bootloader I've seen what in fact if I falter my Mobile on the 2.1 version go there I've read ...
So I downloaded a 2.1 firmare and it gestock with the Flash tool and now when I turn my mobile on I come to the PIN entry further, that it is not even used in the introductory menu where one language ect. can select ....
Then I took Seus & PC Companion and it resets .... But after the reset still does the same after PIN entry goes not just continue although I can pull down the menu bar, but more is not I see just only the background image and the bar at the top but nothing more I can not help Need urgent help.... Sorry for my bad English :S But i need Help Hope you can help
have you tried to remove your simcard?
1. remove your simcard
2. try to boot your device
3. if the problem still exists, reflash your phone...
Phone flashing guide for xperia x10
Flashtool guide from G-FACE
[25NOV][FLASHTOOL GUIDE] HOW TO for n00bies - G-FACE GUIDE
ROM Collection by THeLogiC
[Completed]X10 Stock Firmware Collection
Have a nice day!
Ehm.... Thanx
Now, works but my card is locked and i haven´t service :S
rec0rdzz said:
Ehm.... Thanx
Now, works but my card is locked and i haven´t service :S
Click to expand...
Click to collapse
Renew your simcard at your telecommunication service center
Hello all
First sorry for bad spelling and wrong place for posting this question if it is not correct place
I got sony ericsson WT19i I try to unlock bootloader via Test point and I it look's like work but can't flash custom kernel (phone has simlock) and next step what I try was it is edit TA (in flashtool) and now after that my phone not boot at all, not even show charging battery, probably I damage bootloder . In Omnius for SE via test point I try click fix S1 Bootloader area (something like this) and it is look like can be fix but I need credit, so my question is ->
It is possible to fix my phone via Omnius for SE (if I pay)
1. It is possible to fix TA wrong edit using S1 Bootloader Fix in Omnius (something like this)
2. If I remove simlock and unlock bootloader Can I reflash TA and get my phone work back ?
3. My phone is only recognize via test point (not flash mode)
4. If I buy credit my phone can be fix using Omnius ? and what steps I need to do to fix this ???
My phone info:
WT19i
11w42
BX9
Thanks for any help.
Regards
I can't quite picture the situation, but I wouldn't recommend buying "credit" or anything like that.
jasio2k said:
Hello all
First sorry for bad spelling and wrong place for posting this question if it is not correct place
I got sony ericsson WT19i I try to unlock bootloader via Test point and I it look's like work but can't flash custom kernel (phone has simlock) and next step what I try was it is edit TA (in flashtool) and now after that my phone not boot at all, not even show charging battery, probably I damage bootloder . In Omnius for SE via test point I try click fix S1 Bootloader area (something like this) and it is look like can be fix but I need credit, so my question is ->
It is possible to fix my phone via Omnius for SE (if I pay)
1. It is possible to fix TA wrong edit using S1 Bootloader Fix in Omnius (something like this)
2. If I remove simlock and unlock bootloader Can I reflash TA and get my phone work back ?
3. My phone is only recognize via test point (not flash mode)
4. If I buy credit my phone can be fix using Omnius ? and what steps I need to do to fix this ???
My phone info:
WT19i
11w42
BX9
Thanks for any help.
Regards
Click to expand...
Click to collapse
the only thing that can be done is to go to the sony tech support and pay THEM instead of others
Hi everyone ,this is my first post and i start it with a problem
(first sorry for my bad english)
i got a g8 rio-l01 with a few problem ( no imei , no sn , no wifi and bt mac adresse) all this problem was solved using the hcu tool
but the biggest problem is the phone boot in a factory mode ,i can see this in the projectmenu>veneer informaton>other info>run mode: factory
so in this mode :
1-i have no shortcut panel and notification panel when i slide from up to down nothing come
2-no signial or network conection
3-in the first home page in the phone i have MMIs app/software upgrade/MMI/projectmenu/MMIa,
in the second one i have runningtest3
in the last one basic android app
4-i can't use keyboard
so i have trayed i think all huawei g8 firmware and nothing change
trayed with DC phoenix methode (the two methode) and same problem
trayed with the original soft (RIO-L01_M105_Board Software_general_Android 5.1_EMUI 3.1_05021TJY) and no change
trayed with l02 ,l03 ,tl00 ,slim6 and cm13 and the problem persist
bootloader and frp are unlocked ,sim too with hcu and phone rooted
if i remove appfac from user data and reboot the keyboard Appears and other app Appears but the phone stay in factory mode with no upper pannel and no network signial
i can use wifi and bt
in fastboot getvar pruduct give msm8916 (it's normal??? the phone is an msm8936)
i think there is a currupted or a missing file or partition
i have all factory flash file
bootloaderimage: huawei_msimage.mbn, MPRG8936.mbn (i don't know how tu use this two files)
fastbootimage: boot.img, ,cache.img ,cust.img ,emmc_appsboot.mbn ,erecovery.img ,frp.img ,fs_image.tar.gz.mbn.img ,gpt_both0.bin ,hyp.mbn ,log.img ,misc.mbn ,modem_st1.mbn ,modem_st2.mbn ,NON-HLOS.bin ,oeminfo.mbn , persist.img ,recovery.img ,rpm.mbn ,sbl1.mbn ,system.img ,tz.mbn,userdata.img ( and all crc file )
any idea are welcome
thank you
Hi again
Any one can tel me witch file or folder is controling the boot mode. Im traying to find by my self but so many files in the root
Os:5.1 emui 3.1 if that can help
Thank you
Screen rotate not working too
any sugguestion are welcome , i will test everything ( if it's not yet done ) i don't worry if the phone will be hard bricked
thank you
Mod Edit
Thread Closed per [OP] request.
jackeagle
Forum Moderator
Hello Guys i need some help with sony experia m4 aqua , i cant open the phone the Sony logo keep staying on , and then the phoen after few seconds will reboot , also im not able to go on developer mode to enable debugging , on program called Emma it says phone is locked which mean , booloader is not activated , i have tried to do flash , with flash tool and is doing the same thing ,
is there someone who can help me with that
1,i need to unlock bootloader without going on the main menu
2.to install new firmware every time i try to do something with fastboot it says FAILED (remote: Command not allowed) , if someone can help me reply on this post thnx
How did that happen to you? I still cant understand how could that happen
Have you tried to hard reset your phone?
Lestairon said:
How did that happen to you? I still cant understand how could that happen
Have you tried to hard reset your phone?
Click to expand...
Click to collapse
i have done anything , flashed diferent firmware from official and nothing works ,
i used flashtool and ftf file ,im getting crazy with that phone i dont know what else to do , i heard if i havent enable , usb debbugin it wont flash good
this is what i see on emma flashtool
Model:
E2303
IMEI:
354512079293367
Software:
Application Software: 1291-5963 26.3.A.0.131
Customization:
CDF: 1295-7055 R3C
Additional information:
Activated: Yes
.
Hello !
I've discovered a new way to root oppo a5s ( CPH1909) after the new security update which removed the mtk-easy-su root
(NOTE : YOU WILL REQUIRE :
1- THE LATEST FRIMWARE UPDATE TO OPPO A5S
2- A PC / Laptop
3- MTK Client Tool -link will be sent here in comments <uploaded by me>
4 - mediatek driver auto installer (link is provided)
5 - SP flash tool <link is provided>
6 - a usb cable
6 - Scatter File (WILL BE UPLOADED HERE IN COMMENTS )
7 - Magisk Manager for your phone (v.26) <from github>
8 - UNLOCK BOOTLOADER USING MTK CLIENT TOOL (No data wipe needed + STEPS WILL BE PROVIDED HERE TOO)
9 - ( optional) MCT MTK BYPASS REV4 ( BUT DOWNLOAD IT IF THERE IS A PROBLEM FLASHING IN SP FLASH TOOL) + <link is provided>
NOTE BEFORE STARTING : If links have problems or it is inaccessible , please tell me to send new links in comments .
also , MAKE SURE YOUR DEVICE IS UPDATED TO THE LATEST VERSION (A.46) BECAUSE IF YOU FLASHED THE BOOT.IMG (you will know what does this file do here later ) WHICH IT IS FOR THE LATEST UPDATE AND YOUR DEVICE IS OLDER THAN IT , YOUR DEVICE MAY BRICK , AND I AM NOT RESPNSIBLE FOR ANY DAMAGES FOR YOUR DEVICE
but , if anything happens , tell me , i might help you .
BIG ULTRA NOTE BEFORE STARTING : If you will share these steps in your website, your youtube video, or anything else , please do not forget to mention the source !!!
So , let's start
STAGE 1 : PATCHING BOOT.IMG
1 - download the latest frimware here
2 - choose the latest version (a.46)
3 - after downloading and extracting the file , you will find many folders > Enter the folder (frimware) , find and copy the boot.img file to your phone
4- patch it by magisk manager
5 - copy the patched boot.img ( usually located in Downloads folder in your phone)to your pc ( note : you will need it later )
6 - replace the patched boot.img with the original one in the folder you have extracted the rom in ( but before it, please backup the original one in an external folder , and also change the patched boot.img to ( "boot.img")
Note : I uploaded the boot.img file if you want to save time instead of downloading the whole rom !
STAGE 2 : Installing MEDIATEK usb Drivers
7- open Mediatek driver auto installer
8 - while the program is opening , a window appears which asks yo if you allow the installer to make changes ... blabla , just click allow (ok)
STAGE 3 : UNLOCKING BOOTLOADER
(NOTE BEFORE STARTING : THERE IS NO DATA WILL BE LOST , AND DO NOT ENABLE THE OEM UNLOCK IN DEVELOPER OPTIONS , THE MTK CLIENT TOOL WILL GIVE AN ERROR DURING UNLOCKING , JUST KEEP IT DISABLED !!!!)
8 - After the program installed the drivers , go to MTK CLIENT TOOL , choose the device name ("OPPO A5S") , choose "UNLOCK BOOTLOADER"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
9 - turn your phone off , and then press these keys (" VOLUME UP + VOLUME DOWN <<in the same time>> ") and plug your phone in using the usb cable , once you hear a sound from your pc ( the usb connection sound) , you can stop pressing , because the phone is in BROM mode ( which you can flash anything but when you unlock the bootloader first
10 - click "Start" button in MTK CLIENT TOOL in your pc , when you see messages appear on the right of the MTK CLIENT TOOL APP , DON'T UNPLUG YOUR PHONE !!!!
When the progress bar achieves 100% in the program , unplug your phone and press power button , if you found a warning message while booting , so , unfortunately....
YOU SUCCESSFULLY UNLOCKED YOUR BOOTLOADER !!!!! XD
So , do not panic if it appears !
The message will say (" your device is unlocked and cannot be trusted , rebooting in 5 seconds ") and then another message appears (" dm-verity error,
Your android system / device is corrupted, please select whether you want to boot in E10 mode or RESTART mode ")
It will give you two choices , you SHOULD choose the RESTART mode by pressing VOLUME DOWN , and tadaaaa your phone is booting normally and the data DIDN'T LOST AT ALL ( like me )
BIG ULTRA NOTE : IF THE WARNING MESSAGE DIDN'T APPEAR , SO YOUR BOOTLOADER ISN'T UNLOCKED Successfully , I ADVICE YOU TO DO THE STAGE 3 STEPS AGAIN AND KEEP AN EYE ON THE MESSAGES APPEARANCE ON THE RIGHT OF THE MTK CLIENT TOOOOL ( IF IT SHOWS THE DEVICE MODEL , THE PROCESSOR , ETC ) SO , CONTINUE THE STEPS UNTIL YOU FINISH STAGE 3 STEPS ! (as this error appears usually when unlocking bootloader)
STAGE 4 ( optional) : BYPASS
Note : you might need this stage if you found an error in sp flash tool (" VERIFIED BOOT IS ENABLED") as it is usually doesn't appear in an unlocked device !
1- open MCT MTK BYPASS , choose the chipset ( MT6765 )
2 - REBOOT your phone into brom mode ( vol up + vol down)
3 - connect your device and click start , and done !
Stage 5 ( the last stage) : Flashing
1- open SP FLASH TOOL
2 - locate the scatter file that I'll provide it in comments here !
NOTE ABOUT THE SCATTER FILE : the scatter file which comes with the frimware is CORRUPTED , I've tried to fix it and it worked !
because when I worked with this corrupted scatter file , it gave me an error while flashing !! , just editing it on my way has solved it anyway
3 - you will see a list of many files , just untick EVERY THING EXCEPT FOR THE BOOT.IMG (Make sure it is the patched one)
4 - BOOT your phone into brom mode (turn it off , press volume up + volume down , connect it with your pc)
5- once you hear the usb connection sound from your pc , click on "DOWNLOAD" button , and wait until a correct sign (√) appears in a window
6 - REBOOOOT
7 - let's Celebrate!
--thanks to the user @Anonymous V for being online when i applied these steps , he was answering every question i ask.
-- if you want anything , or need some help , type in comments here , and I and Anonymous V will be available .
(First time typing a thread )
IMPORTANT NOTE : Please put the boot.img + preloader.bin + the scatter file in a folder , then locate the scatter file using SP Flash Tool, Untick the preloader.bin to avoid bricking the device
ALSO , PLEASE DO NOT PUT THE BOOT.IMG AND THE SCATTER FILE AND FLASH THE BOOT.IMG WHILE PRELOADER.BIN IS NOT AVAILABLE IN THE SAME FOLDER , AN ERROR WILL APPEAR ( ERROR_INVALID_PRELOADER)
REPEAT : DO NOT FLASH PRELOADER.BIN , ONLY PUT IT IN THE SAME FOLDER WITH THE PATCHED BOOT.IMG AND SCATTER FILE, AND FLASH ONLY BOOT.IMG
Another note : Please install the MTK Drivers using MTK Driver Auto Installer + the drivers which comes with MTK Client Tool (UsbDK and choose your arch. 64bit or 32bit(86bit)
+Please ignore the x that i made in the MTK Client Tool screenshot
Thanks for @jimenezshown for providing this info !
MTK DRIVER AUTO INSTALLER : here
Scatter File : here
MTK CLIENT TOOL : here
MCT MTK AUTH BYPASS TOOL (uploaded by Mobile RTX website ) :here
SP FLASH TOOL : here
the patched boot.img file ( to save your time instead of getting the original file from the frimware (rom) and patch it , i thought that providing a patched boot.img by magisk app may help !) : here
note : it is patched by the latest magisk manager app (v.26)
Thank you for creating the thread @Zezo 089 , I am using Oppo A5s and now I found a way to root the phone.
I've already download all the requirements first to prepare.
But, I could not run the "MTK CLIENT TOOL V5.2".
It was just nothing appear when I double click the application.
I use Windows 11. Did it caused by the Windows?
Other question is what step is the boot.img file needed?
fb.hikmawan said:
Thank you for creating the thread @Zezo 089 , I am using Oppo A5s and now I found a way to root the phone.
I've already download all the requirements first to prepare.
But, I could not run the "MTK CLIENT TOOL V5.2".
It was just nothing appear when I double click the application.
I use Windows 11. Did it caused by the Windows?
Other question is what step is the boot.img file needed?
Click to expand...
Click to collapse
Bruh
Just turn off your Windows Defender Real-Time protection and it will work
Just , patch it using Magisk Manager (v.26)
fb.hikmawan said:
Thank you for creating the thread @Zezo 089 , I am using Oppo A5s and now I found a way to root the phone.
I've already download all the requirements first to prepare.
But, I could not run the "MTK CLIENT TOOL V5.2".
It was just nothing appear when I double click the application.
I use Windows 11. Did it caused by the Windows?
Other question is what step is the boot.img file needed?
Click to expand...
Click to collapse
fb.hikmawan said:
Thank you for creating the thread @Zezo 089 , I am using Oppo A5s and now I found a way to root the phone.
I've already download all the requirements first to prepare.
But, I could not run the "MTK CLIENT TOOL V5.2".
It was just nothing appear when I double click the application.
I use Windows 11. Did it caused by the Windows?
Other question is what step is the boot.img file needed?
Click to expand...
Click to collapse
Get it from the rom file ( link is provided in replies) and patch it yourself from magisk manager , or you can get the patched boot.img file ( link in replies, too) and continue these steps as nothing happened
fb.hikmawan said:
Thank you for creating the thread @Zezo 089 , I am using Oppo A5s and now I found a way to root the phone.
I've already download all the requirements first to prepare.
But, I could not run the "MTK CLIENT TOOL V5.2".
It was just nothing appear when I double click the application.
I use Windows 11. Did it caused by the Windows?
Other question is what step is the boot.img file needed?
Click to expand...
Click to collapse
Also , try to open this program in windows 10
Because it did these steps using windows 10 , not 11
bro this guide is so long and boring and not safe
the best way to root this phone is through mtk client (github)
with that tool you can
1.backup the whole firmware in case of an error or a malfunction
2. unlock bootloader of any mediatek phone including oppo a5s
3. rooting this device without any risk
4. you can flash any partition if something happened within this tool without the use of SP Flash tool
the link: https://github.com/bkerler/mtkclient
Khalyl22 said:
bro this guide is so long and boring and not safe
the best way to root this phone is through mtk client (github)
with that tool you can
1.backup the whole firmware in case of an error or a malfunction
2. unlock bootloader of any mediatek phone including oppo a5s
3. rooting this device without any risk
4. you can flash any partition if something happened within this tool without the use of SP Flash tool
the link: https://github.com/bkerler/mtkclient
Click to expand...
Click to collapse
Bro
I made this guide with all of its details to help advanced people , especially The Beginners
+ Bro, i concerned using MTK Client Tool to unlock bootloader , Warned people to backup the WHOLE DATA and flash the boot.img after patching (using SP flash tool)
But it is also a good point to flash any partitions if a brick happened or something else using SP flash tool
Khalyl22 said:
bro this guide is so long and boring and not safe
the best way to root this phone is through mtk client (github)
with that tool you can
1.backup the whole firmware in case of an error or a malfunction
2. unlock bootloader of any mediatek phone including oppo a5s
3. rooting this device without any risk
4. you can flash any partition if something happened within this tool without the use of SP Flash tool
the link: https://github.com/bkerler/mtkclient
Click to expand...
Click to collapse
NOTE THAT I WARNED PEOPLE BEFORE DOING THIS
Khalyl22 said:
bro this guide is so long and boring and not safe
the best way to root this phone is through mtk client (github)
with that tool you can
1.backup the whole firmware in case of an error or a malfunction
2. unlock bootloader of any mediatek phone including oppo a5s
3. rooting this device without any risk
4. you can flash any partition if something happened within this tool without the use of SP Flash tool
the link: https://github.com/bkerler/mtkclient
Click to expand...
Click to collapse
+ Why tf they backup the rom ?
as they can download the Flashable Official rom , and flash it using SP FLASH TOOL ( consider that you should untick preloader before flashing to avoid bricking your device)
Khalyl22 said:
bro this guide is so long and boring and not safe
the best way to root this phone is through mtk client (github)
with that tool you can
1.backup the whole firmware in case of an error or a malfunction
2. unlock bootloader of any mediatek phone including oppo a5s
3. rooting this device without any risk
4. you can flash any partition if something happened within this tool without the use of SP Flash tool
the link: https://github.com/bkerler/mtkclient
Click to expand...
Click to collapse
@Anonymous V What are your comments about that ?
Zezo 089 said:
@Anonymous V What are your comments about that ?
Click to expand...
Click to collapse
actually he is just saying about what can you do using the MTK client tool not "what to do about it " and i dont know if he really read your tutorial because this guy " @Khalyl22 "
sounds that he just wants to sounds smart and also boring? i dont know why he said that but its better to give a long and detailed tutorial to give people more info and understanding about what to do to avoid error and to give comfort to people while doing it and i dont fcking know why he said that its not safe although you give all the necessary steps to avoid error while doing it including the warning " Please Backup you Phone before Doing This " and also i think his not aware about the MTK client Gui version which you used in your tutorial i recommend the Gui version for the people who cant handle the terminal version because they are afraid in getting error i think he is pointing about the MTK client terminal version which i often used, also bro there is a reason why he said backup your whole firmware before doing it and actually his right about that when you backup your whole firmware in your phone you can backup all the data,apps,system preferences,imei and other things which you can restore if the phone fcked up where as the stock flashable rom is different its because its already set by default or factory default by the manufacturer which means its back to old state when you bought the phone well it depends though if you dont care about the data in your phone you can just reflash the stock flashable rom and if you care about the data in your phone you can backup your phones firmware and use that later to restore your phone.
Mine doesn't want to let me enter in BROM mode, I can only hear a plug and unplug loop sound when I try to hold Vol UP + Vol down.