Related
Hello All,
Is there an app that can dim the screen of my Archos 101, and return the screen to predefined brightness with the touch of the screen?
My device is mounted on a wall and the power button is hard to get too, so having a screen dimmer that can return the screen to normal use seems like the way to go.
Or what about the screen never going to sleep, but have it do an auto dim down after a set amount of time and with the touch of the screen it returns to normal usage?
At this point I would settle for work around.
T.I.A.
u may try the app "tasker" wich has a function for brightness level...
so u can at set an idle time to turn it down,.. and hopefully also one to "unidle" or screen tap. Sadly im not sure about that exactly as i dont use takser frequently... just try it out
I also remeber an app wich was able to set a little overlay area to the screen on wich u could slide to turn up/down brightness - so u can slide down to turn it off - and up to turn it on (or left/right,...).
Will search if i can find its name... cant remember atm.
Both methods would require to disable auto turn off on idle function...
As u can WAKE UP the device with the screen while it's in sleep.
Hello FrEcP!
Thanks for the reply.
Will look at Tasker now, seems to be many options so I will need to sit down and have tea to figure this out
Screen Filter
Allows you to even set the level to dim screen to. Simple tap on it to dim, and another tap to make it normal.
Hello diablo009,
Thanks, that may be what I need!
I bought Tasker cause it is important to support our developer
Tasker did make and is still causing my brain to tingle!
Will give Screen Filter a try too.
PamelaGirl said:
Hello diablo009,
Thanks, that may be what I need!
I bought Tasker cause it is important to support our developer
Tasker did make and is still causing my brain to tingle!
Will give Screen Filter a try too.
Click to expand...
Click to collapse
Screen filter is more like a manual one. You got to click on it to enable or disable it.
O.K. so I tried Screen filter and it is a 50/50 solution. Yes it does dim the screen but it is manual whereas I ned something more automatic.
As for Tasker, I have drunk two pots of tea, and energy drink, and gone through two days and still this powerful app is a bit of a challenge to setup.
Anyone with experience setting up Tasker?
OBJECTIVE:
1. After 10 minutes of idle have display dimm to 50% brightness, and never shut-off.
2. With the tap of the screen have display return to 100% brightness.
In exchange for help I would be willing to baking you homemade cupcakes!
T.I.A.
PamelaGirl said:
O.K. so I tried Screen filter and it is a 50/50 solution. Yes it does dim the screen but it is manual whereas I ned something more automatic.
As for Tasker, I have drunk two pots of tea, and energy drink, and gone through two days and still this powerful app is a bit of a challenge to setup.
Anyone with experience setting up Tasker?
OBJECTIVE:
1. After 10 minutes of idle have display dimm to 50% brightness, and never shut-off.
2. With the tap of the screen have display return to 100% brightness.
In exchange for help I would be willing to baking you homemade cupcakes!
T.I.A.
Click to expand...
Click to collapse
yes another problem with screen filter is - it just sets an over lay in gey color - wich means actualy your screen still is at fully brightness (wich is annoying at night /u still got an ugly high glow of the backlight + doesn't save power [k is minor for a wallmount - but still should be considered] )
Well if you would have told that (objectives) more early - your solution would have been more easy
I thought u wanted to completely turn off the screen while being idle....
Anyway:
Settings->Display->Display Timeout->10min
Settings->Display->Brightness->full
Settings->Applications->Development->Always stay on/Stay active...->true
Does exactly what u want - after the timeout (10min) the screen dims (to about 50% or lower) - sadly i can't tell how to affect this value (but it seems its the lowest value the default brightness controll, let u set)
On touch - u got the full brightness... till timeout is reached again.
Device wont ever go to sleep.
Hello FrEcP,
Your instructions worked!
50% auto dim is more on target than before, and I return to baking
Apologies for not being more clear in the beginning.
This is from the Taker Forum:
"Unfortunately you can't do this, Android doesn't provide APIs for apps
to test idle time or respond to screen taps (unless it's in their own
UI)."
Thank you again FrEcP, and diablo009!
You help to make this forum rock solid with your sharing.
workaround with screen filter works fine
I use Screen Standby on my Xoom tablet for this exact same feature. It allows you to set at what time the tablet automatically dims. I have it set for 5 minutes. And then I just tap the screen with my finger and it wakes up. It is also nice to note that tapping the screen does not push any buttons but rather just wakes the device.
https://play.google.com/store/apps/details?id=com.nkahoang.screenstandby&hl=en
Lo
I like to listen to Pandora while working and keeping the phone charged. I have the setting to not turn off the screen when charging but it does dim, making it hard to see notifications/other things.
Is there a way to stop it from dimming while charging?
Go to settings -developer options-stay awake
Sent from my EVO using XDA
I use Tasker for this.
browning said:
Go to settings -developer options-stay awake
Sent from my EVO using XDA
Click to expand...
Click to collapse
Doesn't work, still dims after 10-15 seconds while plugged in.
kidstechno said:
Doesn't work, still dims after 10-15 seconds while plugged in.
Click to expand...
Click to collapse
Ha you got a free thanks......
So what you do to keep the screen from dimming...goto settings/display and set the sleep to never turn off.......this will keep the screen from dimming but don't forget to change it back when not charging....this will drain your battery pretty fast.
slayer69 said:
Ha you got a free thanks......
So what you do to keep the screen from dimming...goto settings/display and set the sleep to never turn off.......this will keep the screen from dimming but don't forget to change it back when not charging....this will drain your battery pretty fast.
Click to expand...
Click to collapse
It stills dims for me, it just doesn't turn off. I am running rotation locker but I doubt that affects brightness
fachadick said:
I use Tasker for this.
Click to expand...
Click to collapse
This is the correct (albeit, more expensive) answer. Buy Tasker from the Play Store, set a profile that, when plugged in, sets brightness to a certain percent (instead of automatic) and sets screen timeout to never. Add an exit profile that returns brightness to automatic and sets screen timeout to whatever you want it to be.
I found a (legally) free solution
https://play.google.com/store/apps/...t#?t=W251bGwsMSwxLDEsIm1kLmtpbmV0aWsuZnJlZSJd
"Always on"
I tried three or four anti-sleep/anti-dim apps and this one works great on my EVO 4G LTE stock ROM!
Please reply if this also works for you!
As many of you may know, for newer version of TS (at least for 4th List, May version devices), it's NOT possible to flick your wrist to show watch face since the Accelerator is DISABLED whenever screen is OFF!!!
What an oversight! A smart watch needs you to push a button to see time? What if when you are driving or have both hand full and cannot spare even a finger!?
(My Pebble, on the contrast, works great here!)
I tried to force the screen always on with watch face, it's great, except it kills my battery in around 6 hrs (airplane mode!) Not acceptable!
Thus, Here comes "Tasface". With this, you could achieve:
1. Let TS shows you time WHENEVER you LOOK at the watch! (well, actually when the watch is face up) or when you flick your wrist (You can modify this!)
2. Reduce using your button (if you have an Shortcut supported launcher like Smart Launcher 2)
DISCLAIMER: I will not be responsible if Tasface broke/brick your TS in anyway! Since Tasface is only a set of Tasker profiles/Tasks you can read everything before decide go or not! Tasface DO mess around with system files!
Pre-requests:
===============
1. Your TS must be ROOTED!
2. You need to know Tasker basics! (It's not THAT difficult to use Tasker...)
3. Tasker (Obviously)
4. Watchface by Kurt Huwig (I didn't test other watchface app. May not work with stock lock watchface) https://play.google.com/store/apps/details?id=de.huwig.watchfaces
5. Secure Settings (Required) https://play.google.com/store/apps/details?id=com.intangibleobject.securesettings.plugin
6. Smart Launcher 2 (Optional, any Launchers supports Shortcut will work. With this you can activate Watch face without using button!) https://play.google.com/store/apps/details?id=ginlemon.flowerfree
Set-up
========
1. Have Tasker (required), Watchface (required), Secure Setting (don't forget to install system helper) and Smart Launcher 2 (Optional) installed. DO NOT IMPORT "Tasface" yet!
2. Disable your stock lock watchface: Go to Setting/Personal & Account/Security/Screen lock/None (<-- This IS IMPORTANT)
3. Launch Watchface by Kurt Huwig, than double tap on any watchface to enter setup
a. check "Keep screen on"
b. Select desired watchface from "Lockscreen face"
c. Recommended to disable all other options
4. Check if the Watchface work or not by turn off than turn on your TS by press the upper physical button. You should see the Watchface you selected shows up when screen on. Swipe to return to your launcher and launch Tasker.
5. Unrar and import Tasface into Tasker
6. Close Tasker
7. Turn off --> Turn on your TS with the upper button
8. Profit!
Notes
=======
1. When watchface is displayed:
a. Touch screen is DISABLED to avoid accidental touch.
b. Screen will be OFF after 8 seconds (you can setup your prefer time)
c. Touch screen lock is achieved by putting a transparent Tasker Scene element on top of the Watchface. A small "X" on bottom right screen is used to reactivate the touch screen. You can also push the lower right button (back) to reactive your touch screen.
2. To show watchface (after automatic screen off as Step 1)
a. Just face the watchface up. The watchface should appear for another 8 seconds
b. There maybe a 1~2 second delay. This is due to Tasker not detecting the Watchface up event. I cannot do anything about this....
c. You could change the watchface up to anything else, like "Sensor shake/Backware-Forward"
3. If you have "Smart Launcher 2" or any other launcher supports Shortcut, you can set a icon to task "Lock". With this TS will activate watchface WITHOUT touch physical button. (I heard horrible stories about broken button so want to avoid use them as much as possible!) It's normal the screen will off for 2 second than back on with watchface for 8 seconds!
4. You must wait for automatic screen off or use the "Lock" shortcut to turn off the screen! Tasface will NOT work if you turn off TS by pressing the upper right physical button. This DISABLE the accelerator as mentioned above. To reactive Tasface, just turn on TS by pressing the upper right physical button to show the watchface than wait for automatic screen off.
I wrote this primarily for myself so a there are a lot of bugs. You are free to modify it and make it better. Just let me know if you have any questions and need help or improvement here!
Thanks button is just a click away if I helped you!
Update the attached file to resolve some bugs and improve responseness
Technical stuff -- What is done here?
=================================
It's a bit technical here .... No need to read if you don't care how it works!
Since TS turns off the accelerator whenever screen off, so it's not possible to activate the screen once it's off by external conditions. (You can still set a timer to wake the screen, but it's meaningless)
Thus we need to disable the power hungry backlight while keep the screen on!
I found out that it's possible to control the backlight by doing
Code:
echo 0 > /sys/class/leds/lcd-backlight/brightness
Thus, I set up a Task profile which fires whenever Watchface is activated and TS is face up, to activate the backlight then turn off the backlight again after 8 seconds, but KEEP the TS screen wake! (Only backlight is turned off to save battery!)
Code:
echo 1 > /sys/class/leds/lcd-backlight/brightness
You can change "1" to anything from 1~255. I just found 1 bright enough for me
Since screen/system is always wake, to avoid accidental touch, a transparent Tasker Scene on top of the screen is add to disable the touch screen. A small "X" is on the bottom right to disable this transparent scene if anything goes wrong. (And it does, Tasker is laggy sometimes and too slow to remove this scene automatically!)
I also lower down the CPU cycle to the lowest possible to further saving battery. CPU returns to normal frequency when leaving watch face (into launcher, etc...)
That's all! Folks!
Reserved
Shake
I was able to use application Shake from ADL Dev (com.adl.appshaker) to switch screen on with shake/twist of wrist. You just have to enable "activate when screen off" option - and it is little battery hungry.
Of course I have version 20140513.
I also strongly suspect, that you can force sensors to work when face is off, by switching into "Sports mode" (Run Settings->SMART MODE->Sports Mode)
Piw said:
I was able to use application Shake from ADL Dev (com.adl.appshaker) to switch screen on with shake/twist of wrist. You just have to enable "activate when screen off" option - and it is little battery hungry.
Of course I have version 20140513.
I also strongly suspect, that you can force sensors to work when face is off, by switching into "Sports mode" (Run Settings->SMART MODE->Sports Mode)
Click to expand...
Click to collapse
Thanks for the advice.... I just think since I already have Tasker on my TS, I want to find a way to not to use additional SW which always runs in background to monitor things... Since its battery hungry, maybe Shake also use the same trick as me......
As for Smart mode settings, I tried bdefore but none of them work for flick wrist to wake up... Maybe I missed something?
Sent from my HTC_One_max using XDA Premium HD app
might give this a shot since shake was waking up watch at wrong times and was destroying battery life, and i already have tasker on the watch and running so hopefully that will avoid the battery loss that shake had.
lssong99 said:
As for Smart mode settings, I tried bdefore but none of them work for flick wrist to wake up... Maybe I missed something?
Click to expand...
Click to collapse
I was just guessing, because it suppose to leave GPS and accelerometer working with screen off, to enable sport trackers and pedometers.
If it works? - I haven't tested yet...
Piw said:
I was just guessing, because it suppose to leave GPS and accelerometer working with screen off, to enable sport trackers and pedometers.
If it works? - I haven't tested yet...
Click to expand...
Click to collapse
Wow! It seems you are right! The watch DOES allow sensor to work on Sport mode after screen off, but the response from Tasker become very sluggish when screen-off!
I made a simple profile to detect shake action (if shake than beep), and when screen on, the watch beep in less than one second after shake began, but when screen-off (sport mode), It took Takers 5~6 seconds of continuous shaking to detect the shake event. Not very practical for a watch solution...
With my Backlight solution, although sometimes still hiccup happens, but my feeling is about 90% of time the watchface wakeup correctly...
tasker problems
lssong99 said:
Wow! It seems you are right! The watch DOES allow sensor to work on Sport mode after screen off, but the response from Tasker become very sluggish when screen-off!
I made a simple profile to detect shake action (if shake than beep), and when screen on, the watch beep in less than one second after shake began, but when screen-off (sport mode), It took Takers 5~6 seconds of continuous shaking to detect the shake event. Not very practical for a watch solution...
With my Backlight solution, although sometimes still hiccup happens, but my feeling is about 90% of time the watchface wakeup correctly...
Click to expand...
Click to collapse
i can not import to tasker tasker do not see it
pashka79 said:
i can not import to tasker tasker do not see it
Click to expand...
Click to collapse
Do you mean the Tasker cannot see the prj file?
For how to import project, you could check http://tasker.dinglisch.net/userguide/en/faqs/faq-how.html#q
and you need to put the unrared file (.xml) in /sdcard/tasker/projects for Tasker to see it...
How much does this cost in battery? If I don't use my watch I can get about 4 days out of it.... I know Shake stops the TS going into deep sleep, won't this do the same and annihilate battery??
death_entry said:
How much does this cost in battery? If I don't use my watch I can get about 4 days out of it.... I know Shake stops the TS going into deep sleep, won't this do the same and annihilate battery??
Click to expand...
Click to collapse
Don't know for tasker but I'm using shake app from market and I even I thought it'll drain my battery very fast - it didn't...
It's almost like I don't have it...
My battery can't hold on more then 24hours but I really use my watch and it's constantly connected to wifi and BT.
Sent from my C6903 using Tapatalk
funky0308 said:
Don't know for tasker but I'm using shake app from market and I even I thought it'll drain my battery very fast - it didn't...
It's almost like I don't have it...
My battery can't hold on more then 24hours but I really use my watch and it's constantly connected to wifi and BT.
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
Ah that's prolly why you don't notice it running down... what do you use your watch for? Tbh i haven't used it for more than a watch lol/...
death_entry said:
Ah that's prolly why you don't notice it running down... what do you use your watch for? Tbh i haven't used it for more than a watch lol/...
Click to expand...
Click to collapse
Well as I have Z1, which is quite big, I'm using TS mainly to receive notifications (using swapplink).
I'm receiving many emails (I'm using Z1 as my business phone) so it's great that I can see on my TS subject of email and decide what will I do.
I have sim card in TS and I use it all the time, when I'm alone in a car (and that's 6 hours per day )
I found TS quite practical for companion
BTW...from today, I'm using this app to help me save my battery power on TS and Z1
http://forum.xda-developers.com/showthread.php?p=53078670
Sent from my C6903 using Tapatalk
lssong99 said:
Do you mean the Tasker cannot see the prj file?
For how to import project, you could check http://tasker.dinglisch.net/userguide/en/faqs/faq-how.html#q
and you need to put the unrared file (.xml) in /sdcard/tasker/projects for Tasker to see it...
Click to expand...
Click to collapse
I tried this and Tasker can't see the xml on my TS
Here's a workaround for those having issues seeing the xml file in Tasker
Using a file manager, navigate to the location of the xml file
"Open with.." and choose Tasker
You will then see a toast notificaiton saying "...can be opened in Tasker" (or something like that)
Open Tasker -> Preferences -> UI -> Untick "Beginner Mode"
Back to main Tasker screen
In the HOME icon (bottom left) -> Long press, and choose "Import", then look for the XML file, wherever you put it
Boom
Note: Make sure you have the correct app from the Play Store, and not from the Ostore (same app, different names)
death_entry said:
How much does this cost in battery? If I don't use my watch I can get about 4 days out of it.... I know Shake stops the TS going into deep sleep, won't this do the same and annihilate battery??
Click to expand...
Click to collapse
I am afraid that this will have an impact your battery. Basically to make TS responsive (light up as soon as you raise your hand), the screen/CPU is kept wake. Only LED backlight is disabled.
Although in my implement I put the CPU is slowest frequency and sleep Governor, but battery is around one day usage without radio on....
We need kernel tweak of this to achieve good battery life... Tasker is only... Tasker...
jeremy.chan said:
Here's a workaround for those having issues seeing the xml file in Tasker
Using a file manager, navigate to the location of the xml file
"Open with.." and choose Tasker
You will then see a toast notificaiton saying "...can be opened in Tasker" (or something like that)
Open Tasker -> Preferences -> UI -> Untick "Beginner Mode"
Back to main Tasker screen
In the HOME icon (bottom left) -> Long press, and choose "Import", then look for the XML file, wherever you put it
Boom
Note: Make sure you have the correct app from the Play Store, and not from the Ostore (same app, different names)
Click to expand...
Click to collapse
Thanks I see it now.
put the unzip file at that location and still Tasker cannot see it?
Hi do read the solution I provided
Tapa-ed from the Sony Z Ultra
Hi,
I'm just letting everyone know that I have just pushed an update to my automation app MacroDroid http://forum.xda-developers.com/showthread.php?t=1694335 to add Android Wear support.
You can read about the functionality on my blog post here: http://macro-droid.blogspot.co.uk/2014/08/introducing-macrodroid-wear.html
This is a first release, so I strongly welcome all feedback and comments!
Cheers,
Jamie
Very impressive app ?, seriously quality app.
I need more time to test out all the different stuff in your app but so far everything works great whit my lg watch .
This is using 60mb of memory for the macrodroid process alone. Seems very high.
This is on a Moto G. Compared to Tasker which is running at the same time and only uses 12mb.
I have deleted all macrodroid profiles so it shouldn't have had anything running, but the memory use was still high.
Cossack101 said:
This is using 60mb of memory for the macrodroid process alone. Seems very high.
This is on a Moto G. Compared to Tasker which is running at the same time and only uses 12mb.
I have deleted all macrodroid profiles so it shouldn't have had anything running, but the memory use was still high.
Click to expand...
Click to collapse
You're right that does sound very high, I've got a bunch of macros configured and I'm at 19MB. Most likely you've hit a memory leak in the UI and the UI pages are still hanging around in memory. It can be hard to catch all cases as there are many many UI paths, but I'll certainly do some more memory profiling to see if I can spot anything naughty hanging around. If you kill the MacroDroid process and restart does the memory return to something sane for you?
Cheers,
Jamie
I killed the app and wiped the macros. Started again with only 1 simple low battery warning macro. It stayed at 15mb all day.
I just created a new location macro and it jumped to 38mb and stayed there.
I switched macrodroid off and restarted and it is now back to 17mb.
Cossack101 said:
I killed the app and wiped the macros. Started again with only 1 simple low battery warning macro. It stayed at 15mb all day.
I just created a new location macro and it jumped to 38mb and stayed there.
I switched macrodroid off and restarted and it is now back to 17mb.
Click to expand...
Click to collapse
Great thanks for the info. I've just had to move to Google Maps V2 and changed a load of UI, so I'm guessing I've got a little bug in there where I'm not releasing something. Hopefully I can get this squashed for the next update.
Cheers,
Jamie
I am trying to automate the screen intensity.
The worst thing about my Gear Live is battery live, if I am inside love to find a way to always have the screen minimum and the best I could do is have a manual macro to change the screen intensity.
I wonder if I can design a macro that every time the watch gets a notification the screen goes to 5, when it dims it goes back to 1.
Why not set the brightness to low when connected to WiFi and high when disconnected.
It should mean you always have a dim watch when indoors
AstroDigital said:
I am trying to automate the screen intensity.
The worst thing about my Gear Live is battery live, if I am inside love to find a way to always have the screen minimum and the best I could do is have a manual macro to change the screen intensity.
I wonder if I can design a macro that every time the watch gets a notification the screen goes to 5, when it dims it goes back to 1.
Click to expand...
Click to collapse
You could do something like on every incoming notification (using the incoming notification trigger), you set the brightness high and have a sleep before next (e.g 30 seconds) and set the brightness low again. Not perfect but might be of some use.
What I really wanted to do was find a way so that I could configure the Always on screen setting via the action, but after digging down into the code I'm pretty certain this would only be possible on a rooted Android Wear device and I don't really want to go adding 'root only' features for Wear just yet. Hopefully Google will open up this API at some point because as you point out battery life is critical on these devices.
Cossack101 said:
Why not set the brightness to low when connected to WiFi and high when disconnected.
It should mean you always have a dim watch when indoors
Click to expand...
Click to collapse
I do not use WiFi on my cell phone, just LTE data at least 95% of the time.
---------- Post added at 05:02 PM ---------- Previous post was at 04:39 PM ----------
UndeadCretin said:
You could do something like on every incoming notification (using the incoming notification trigger), you set the brightness high and have a sleep before next (e.g 30 seconds) and set the brightness low again. Not perfect but might be of some use.
What I really wanted to do was find a way so that I could configure the Always on screen setting via the action, but after digging down into the code I'm pretty certain this would only be possible on a rooted Android Wear device and I don't really want to go adding 'root only' features for Wear just yet. Hopefully Google will open up this API at some point because as you point out battery life is critical on these devices.
Click to expand...
Click to collapse
If I set the app to listen for notifications it looks like it will disable much more than I would like to be disabled.
Manage Accessibliity, MacroDroid
-air gesture, air view interaction control, assistant menu, multi window, direct pen input, palm motion, one-handed operation will all be turned off....
I always lost "Jess" my customer voice synthesizer
Some of these I will miss on my Note 3 but I am trying it,
Toggle on Notification
Android Wear set the brightness to 6
Sleep before next action 20 seconds
Android Wear set the brightness to 1
If it works right notifications will crank the display for 20 seconds and then dim the display (may cut it back to 10 or 5 seconds)
You know I like your app, tried the other macro app .... (can not remember its name)
Found it too complicated..... Thanks for the tip.
AstroDigital said:
I do not use WiFi on my cell phone, just LTE data at least 95% of the time.
---------- Post added at 05:02 PM ---------- Previous post was at 04:39 PM ----------
If I set the app to listen for notifications it looks like it will disable much more than I would like to be disabled.
Manage Accessibliity, MacroDroid
-air gesture, air view interaction control, assistant menu, multi window, direct pen input, palm motion, one-handed operation will all be turned off....
I always lost "Jess" my customer voice synthesizer
Some of these I will miss on my Note 3 but I am trying it,
Toggle on Notification
Android Wear set the brightness to 6
Sleep before next action 20 seconds
Android Wear set the brightness to 1
If it works right notifications will crank the display for 20 seconds and then dim the display (may cut it back to 10 or 5 seconds)
You know I like your app, tried the other macro app .... (can not remember its name)
Found it too complicated..... Thanks for the tip.
Click to expand...
Click to collapse
I've no idea why these should be turned off by enabling MacroDroids accessibility options, but I don't have any Samsung devices so I'm afraid I can't really look into it at the moment.
UndeadCretin said:
I've no idea why these should be turned off by enabling MacroDroids accessibility options, but I don't have any Samsung devices so I'm afraid I can't really look into it at the moment.
Click to expand...
Click to collapse
If the macro works may not care much about the disabled stuff.
May want to put constraint in, 5am do not need the watch display cranked.
Introducing Pixel Pulse - a simple app to make your Ambient Display pulse when you have notifications!
Choose the interval and select the apps you want you to cause your screen to wake.
Optional paid features let you select different icons and colors for specific apps but the interval and app filter core functionality is all free.
https://play.google.com/store/apps/details?id=com.compass.pixelpulse
If you had previously purchased Ambi-Turner, it has been updated for the new permissions, but because it was written for 8.0 and when Google's ambient display worked differently I decided to leave it as it is. You may however transfer your purchase status of Ambient Display to Pixel Pulse using both apps.
FIRST!
So, I've installed and tested and here are my initial findings:
It works great and looks gorgeous!
If you have your notifications set to display the notification contents, those contents will also flash on the screen.
The default display interval of 60 seconds works perfectly, but when I set it to 30 seconds, it flashed approximately every 10 seconds for some reason.
The notification it chooses to flash doesn't appear to be based on the most recent received or highest priority. Can you explain how the app knows which notification to flash on the display?
So far, there is no way to interact with the notification. Swiping away or double tapping do nothing.
The only way to wake the phone is to press the power button or fingerprint scanner.
This is a great start and I hope you please keep up the great work! I will be donating to the cause!
PuffDaddy_d said:
FIRST!
So, I've installed and tested and here are my initial findings:
It works great and looks gorgeous!
If you have your notifications set to display the notification contents, those contents will also flash on the screen.
The default display interval of 60 seconds works perfectly, but when I set it to 30 seconds, it flashed approximately every 10 seconds for some reason.
The notification it chooses to flash doesn't appear to be based on the most recent received or highest priority. Can you explain how the app knows which notification to flash on the display?
So far, there is no way to interact with the notification. Swiping away or double tapping do nothing.
The only way to wake the phone is to press the power button or fingerprint scanner.
This is a great start and I hope you please keep up the great work! I will be donating to the cause!
Click to expand...
Click to collapse
The times were accurate on my pixel 2, but my pixel 3 which only just arrived, was being stopped. Probably due the aggressive process killing I've read about. So this morning I quickly added a secondary wake to keep it from being killed. I'll sync the times when I get home from work.
It uses the natural order of notifications. A priority option would be a good idea.
No interaction yet, but that's planned. So is a blackout period (don't pulse when you're sleeping for example).
Ignore my comment about the notification priority - that was user error.
Feature request: Can you add an option to have the ambient display stay on (no pulsing) until the user bypasses the ambient display screen? The flashing of the ambient display is a little distracting when the phone is on a desk. This way, we could still tell at a glance when we have a notification waiting, but the screen will go back to all black once we act on it or simply unlock the phone.
I can try but it may not be possible without root.
grokus said:
I can try but it may not be possible without root.
Click to expand...
Click to collapse
No worries - this is xda, root is all we do!
grokus said:
Introducing Pixel Pulse - a simple app to make your Ambient Display pulse when you have notifications!
Choose the interval and select the apps you want you to cause your screen to wake.
Optional paid features let you select different icons and colors for specific apps but the interval and app filter core functionality is all free.
https://play.google.com/store/apps/details?id=com.compass.pixelpulse
If you had previously purchased Ambi-Turner, it has been updated for the new permissions, but because it was written for 8.0 and when Google's ambient display worked differently I decided to leave it as it is. You may however transfer your purchase status of Ambient Display to Pixel Pulse using both apps.
Click to expand...
Click to collapse
I have been working on a similar app, and could not find a way to get this to work while still allowing the device to doze, so the battery life is heavily impacted. Did you solve the battery drain issue?
BLuFeNiX said:
I have been working on a similar app, and could not find a way to get this to work while still allowing the device to doze, so the battery life is heavily impacted. Did you solve the battery drain issue?
Click to expand...
Click to collapse
I haven't noticed a battery drain issue, but I'm hoping xda can help find one if it exists. I'm not actually turning on the screen so doze should remain active.
grokus said:
I haven't noticed a battery drain issue, but I'm hoping xda can help find one if it exists. I'm not actually turning on the screen so doze should remain active.
Click to expand...
Click to collapse
Ah, I see. I have not actually run your app. I did not realize that your were pulsing the notifications themselves -- that's clever! For my own implementation, I am animating a fake LED that fades in and out, which obviously requires the screen to be on. The AOD has a way to doze with the screen on, but I have not found a way to expose that functionality to an app without root.
Anyhow, I see you are using setExactAndAllowWhileIdle to schedule your pulses. I wonder what the battery (and timing) impact is compared to setAndAllowWhileIdle?
Nice work on this!
I originally went down the road of doing a custom screen to mimic the LED until I came up with this idea.
From other threads I've seen some people will prefer that even if it uses slightly more battery.
BLuFeNiX said:
Ah, I see. I have not actually run your app. I did not realize that your were pulsing the notifications themselves -- that's clever! For my own implementation, I am animating a fake LED that fades in and out, which obviously requires the screen to be on. The AOD has a way to doze with the screen on, but I have not found a way to expose that functionality to an app without root.
Anyhow, I see you are using setExactAndAllowWhileIdle to schedule your pulses. I wonder what the battery (and timing) impact is compared to setAndAllowWhileIdle?
Nice work on this!
Click to expand...
Click to collapse
I'm willing to be a tester for you if you need one. Pixel 3, rooted with magisk.
There's now an option to be able to swipe to dismiss and double tap to open the app. I'm working on notification actions next.
grokus said:
There's now an option to be able to swipe to dismiss and double tap to open the app. I'm working on notification actions next.
Click to expand...
Click to collapse
Dude, you're a beast! Keep it up!
I may be able to use the real icons and colors. If so should I just remove the icon customization or would people still find that useful?
Hi mate, i bought your app right away. If you can integreat the original Icons for the famused apps, that would be great.
And can you look at the puls time? I set my time to 20 seconds but it puls every 40 - 50 seconds? Strange.
grokus said:
I may be able to use the real icons and colors. If so should I just remove the icon customization or would people still find that useful?
Click to expand...
Click to collapse
just as it is perfect now, only the repetition time does not work reliably
There is a possibility that the AOD stays on until the message has been read
Been looking for a way to customize the notifications since there's no LED light on this phone. I installed and bought you a coffee, I'll let you know how it goes. Thanks for your efforts.
Hi is this app only usable to Google Pixel phones???
Man this sounds like an awesome app however I'm on an LG V30 (which also doesn't have an LED but this doesn't seem to work. The notification interaction feature alone would be worth the donation.
I'll mess around some more and see if I can get anything