Hello I have some problems with my sd variant. My phone doesn't charge and isn't recognised by my computer. I was on global stable and because i thought it was a rom's problem, i flashed chinese dev rom. The problem was still there. Now I want to go back to global stable because the rom has some bugs, but i cant enter download mode. My phone enters test mode after one red led blink. I have locked bootloader so i cant flash when in fastboot mode
Related
Hi xiaomi users
if you bricked your mi5 after wrong flash or something went wrong and you not able any more to start you device normaly, so you'r in the correcte thread to unbrick your mi5 with the correcte fastboot rom and miflash beta
whatever the cause of bricking your device( in my case no boot, no recovery mode and no fastboot mode just black screen),if it connected to your laptop and show qualcomm QHsusb QDloader 9008 in devices manager then you have big opportunity to make it alive again :fingers-crossed:
1 :
download and install xiaomi flashing tool miflash beta frome here : http://en.miui.com/forum.php?mod=at...jYmIxNDZifDE0NjYzMTc1OTZ8MzEyNzU5MnwyODE5Nzk=
2 : download the correct fastboot rom for your xiaomi mi5 from here : http://update.miui.com/updates/v1/fullromdownload.php?d=gemini&b=X&r=cn&n=
note: i have chosen the latest china dev fastboot rom to unbrick my mi5,other fastboot roms not worked for me
put your fastboot rom to c/ drive and extract it ,not on desktop or other extension
3 : enter on fastboot mode by pressing power and volume down you will see logo of xiaomi its fastboot mode,if you cant access fastboot mode just connect you mi5 to your laptop it will detect it as qualcomm driver
4 : open miflash beta and check flash all,chose you rom in c drive then clik refresh button you will se your device as com port,now start flash by cliking on flash button and be patient it will take over 5 min, when success unplug your and start your phone,if not start just let it connected to your laptop over 30 min it will start automatically
now enjoy your mi5 with latest miui8 china developer,
hit thanks buton if im help you :good:
Hi guys, i was trying to flash a global stable rom with edl and miflash but something went wrong and miflash says that memory was unsifficient. What should i do? I'm on windows 10 64bit with all adb installed (i think). I even disabled the driver license. I didn't do nothing since the error and i don't know if i should unplug the cable or whatever.
hey, it says flash done (sucessful), but my phone still with black screen and nothing happens, should i just wait?
Hi guys, im not sure if this will help you or not but my phone bricked last night and ive manage make it work again by following this method but it little bit different so when it my phone successfully flashed, i just left it untill the batteries is empty by left it all night (before bricked the batteries was 50% i think), maybe it will take longer then mine and if this method work it showing battery empty indicator like normal phone.. ps: when my phone bricked i had no fastboot no recovery no edl, just black screen and red light indicator.. good luck guys
i have used the test point method and successfully flashed the latest Rom V8.5.2.0 with the latest MiFlash 201612220. after flash done, the phone still cannot turn on... anybody can help???
Hello,
I just received my redmi note 3 SD, with globale stable rom...
I wanted to install CM13.
So first, i wanted to install global dev rom to unlock bootloader.
I tried with updater but i have an error.
I tried with fastboot global dev rom and miflash with the tuto but i have always error.
I tried different version of rom and miflash and now my phone is on black screen. I haven't any acces to fastboot mod with start button+volum - or +.... I have only red light and black screen and when i connect phone to pc i see that: Qualcomm HS USB Diagnostics 900E (com10).
Can you help me to unbrick please?
first: u dont unlock the bootloader by flashing global dev rom ... u unlock the bootloader by either request official unlock and using the official xiaomi unlock tool or use the inoffiial method.
is the red light flashing? maybe youre in EDL mode? then u can flash the whole rom
I have one redmi note 3...unlocked with cm13 since june... i did all myself.
The new redmi note 3 with problem is for my father, i formatted my PC so i reinstalled all soft yesterday. I know how to unlock bootloader but i think i must be with rom global dev...
i think i'm not in EDL mode because when i refresh in miflash, i can't see my phone. Before, when i was in EDL mode, my phone was detected by miflash...
I have the red light ....
I see a solution is to remove backpanel, and remove the battery to reset the phone but i'm afraid to do this...
Thanks to help me
kevin761 said:
I have one redmi note 3...unlocked with cm13 since june... i did all myself.
The new redmi note 3 with problem is for my father, i formatted my PC so i reinstalled all soft yesterday. I know how to unlock bootloader but i think i must be with rom global dev...
i think i'm not in EDL mode because when i refresh in miflash, i can't see my phone. Before, when i was in EDL mode, my phone was detected by miflash...
I have the red light ....
I see a solution is to remove backpanel, and remove the battery to reset the phone but i'm afraid to do this...
Thanks to help me
Click to expand...
Click to collapse
you don't have to be on global dev rom to unlock bootloader, i unlocked mine officially on global stable rom
I have opened the back panel, disassemble motherboard and push the 2 pins... After, my device was detected as Qualcomm 2008 and not 900E and it was detected into miflash old version...
I tried to flash the last fastboot globale stable rom but i had an error " max buffer sector is 256"... And my phone came back to Qualcomm 900E in the windows 10 settings... And it's now not detected by miflash... I need to unmount again and touch the 2 pins on motherboard...
After what i can do to flash a rom correctly?? I don't understand why i have always an error...
Use newest version miflash on windows 10. Make sure it's plugged into USB 2.0 port.
Hello,
Problem solved... I disassemble a second time the phone, i pushed the 2 pins on the motherboard.
I did the same as this tuto: http://en.miui.com/thread-245347-1-1.html
At the middle of the tuto, i don't understand why but my phone turn on with logo "Mi" at boot!!! And the phone boot correctly...
On my PC, I have unistalled all programs and reinstalled all,.. After, i have installed ROM Global dev>Unlock BL> Install TWRP>Install CM13>Install Gapps... And now the phone works fine!!!
Thanks!
So, while trying to flash a new MIUI rom to my Redmi Note 3 in EDL mode I must have flashed an incompatible rom. My phone is acting as though it is in EDL mode but only when it is receiving power from the charger or computer. I cannot boot into recovery or fastboot mode, and the MiFlash tool does not detect it. The windows device manager still detects it however. So, is my phone permanently bricked or is there a way to fix this? I will be more than happy to post the MiFlash log.
2 days before i unlocked my redmi note4 , i was on latest miui beta so i want to flash twrp now and yesterday i flash twrp from abhishek thread of xda, then from twrp i wipe system and install old stable miui 8.1.15 because it was good and no bugs there which was successfull shown by twrp then clear delvic cache then i reboot to system, twrp gave me error no os installed are you sure want to reboot. i thought that its some twrp bug which i earlier faced on other device ,so i go ahead and reboot, then my mobile goes off, then no charging animation, not booting to recovery not turning on, and at all not going to fast boot by pressing lower volume button and inserting usb cable its going to hs 900e diagnostic mode only detected by pc, as far as my knowledge my mobile hard bricked. so i searched online no thread i found for redmi note 4, but found many thread for redmi note 3 , which was using some mother board pins sorting method for entering in edl mode and on entering for qdl 9008 mode, because redmi note 4 not have edl mode or locked edl also i dont want to open my new mobile back cover. so one last option was going to service center only, i downloaded mi flash but i think its only detects qdl 9008 mode not 900e mode. because fastboot not coming and also i dont have flasher cable, which was also mentioned as solution.
one more thing i found that for redmi note 3 that it also enters in fastboot mode by pressing volume down and power key simultaneously from gsm arena , only 20 % battery was left in mobile .
so i tried this thing and shocked that mobile entered in fastboot mode, note that volume down+usb cable in pc not working here
so by this i entered in fastboot because i not have fastboot rom so i again flashed twrp and then flash RR from twrp and recovered my mobile , then all thing began to working normal. mobile began to go recovery by volume+ + power key and fastboot by volume down+usb :laugh::laugh::laugh:
today pc froze while I was running flash all script (stock fw) in xiaomi flash tool with a xiaomi note 4 in edl mode
after that phone would only go into emergency 900e mode
I opened the phone (removed case), unplugged battery connector,shorted two testpoint pins (attachment) and connected phone to pc
phone then showed up in 9008 mode (edl) and I was able to run xiaomi flash tool and restore stock fw
I bricked my RN3Pro on AOSP Extended Rom so i started to flash Xiaomi official rom by MiFlash. That took me 2000seconds on MiFlash so i disconnected phone (to try it again). It crashed from fastboot mode to EDL (red led is blinking). And now.. My phone is undetectable on my PC and two notebooks. I have xiaomi drivers / google drivers, tried to add new android drivers. Nothing helps.
Trying to detect phone by MiFlash, adb, fastboot programs (some versions.. "minimal" too). Its still undetectable. Devices list is always empty. I don't think this is because of the drivers, this was ok before installing this bad xiaomi rom.
I need my phone tomorrow so please help me!
Just press power + volume Down
Then unlock bootloader and then reboot phone
I have the same issue, stuck on EDL (red led blinking) unable to be detected on anything, cannot use buttons to get into Fastboot or recovery.
Please help!!
Use test point method...... U will find the trick on YouTube...
[email protected] said:
Just press power + volume Down
Then unlock bootloader and then reboot phone
Click to expand...
Click to collapse
Unlocking bootloader solved it.. I spent 6 hours. Phone started normally on old AOSP ROM. Thank you very much