I'll do a quick a run down of what my phone has been through, so you have the info you need before asking.
1. Bought used i9305 with defect charger port
2. Soldered on a new port
3. Flashed CWM
4. Flashed ROM's for a while.
5. Reflashed to stock.
6. Tried to flash CWM again but soft-bricked my phone.
7. Reflashed to stock.
8. Flashed CWM and now i keep getting different errors when trying to flash Custom ROM's.
I first off started to have this problem: Status 7.
I did the updater-script fix, to no avail.
Then i got Status 4 error, and can't find anything about it on the webs.
So it won't let me flash any CR's.
I tried:
Updater-Script fix (Gave me Status 4 right after)
Different ROM's (CM , AOKP)
Different Recoveries (CWM Touch , CWM Non Touch , CM Recovery , TWRP (Didn't flash correctly so it didn't show)
Different Kernels (Stock and AGNi)
Also when i flashed recoveries on a stock kernel, and i booted into OS then it overwrites the recovery, so i had to pull out the battery and boot directly into the recovery and when i rebooted the custom recovery was gone. until i installed AGNi.
UPDATE:
I have a thing i will try later today, which is flashing another firmware file.
If this works, then i'll post it.
Drew McIntyre said:
UPDATE:
I have a thing i will try later today, which is flashing another firmware file.
If this works, then i'll post it.
Click to expand...
Click to collapse
Did you try using mtk tools if it is possible?
Mokin said:
Did you try using mtk tools if it is possible?
Click to expand...
Click to collapse
I'll try that now.
Mokin said:
Did you try using mtk tools if it is possible?
Click to expand...
Click to collapse
Sorry, but what should this tool help with?
Never used that tool, and can't find a tutorial on howto.
Drew McIntyre said:
Sorry, but what should this tool help with?
Never used that tool, and can't find a tutorial on howto.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=52vWfCLZrrU
This is a tutorial which helped me, and this is how to flash roms
https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Mokin said:
https://www.youtube.com/watch?v=52vWfCLZrrU
This is a tutorial which helped me, and this is how to flash roms
https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Click to expand...
Click to collapse
My device is rooted (AGNi kernel roots it)
And i know how to flash CR's, i have done it since 2012, but this error is very new to me.
UPDATE:
After flashing a old firmware (3.1.2 Jelly bean) it seems it has fixed this, but i'm still encountering problems.
The new problem is that somehow i don't have a recovery anymore, i fixed this by flashing a custom recovery.
I could install the zip file, but even after /system wipe and factory reset the phone would not boot.
I proceeded to unbrick the hardbrick with my RIFF.
i also checked that it was for my i9305, which is was.
UPDATE:
After i removed CF-AutoRoot files from my NAND it worked outta nowhere.
Related
Every time i try to flash a custom rom the rom flases in 5-10 seconds and then phone reboots and gets stuck at samsung galaxy s3 GT-i9300 black LOGO. I can only flash a rom with odin. I have tried touch clockworkmod and simple latest versions and cfroot one also, and i have tried flashing from internal and external sd card...help pls
vladtdr said:
Every time i try to flash a custom rom the rom flases in 5-10 seconds and then phone reboots and gets stuck at samsung galaxy s3 GT-i9300 black LOGO. I can only flash a rom with odin. I have tried touch clockworkmod and simple latest versions and cfroot one also, and i have tried flashing from internal and external sd card...help pls
Click to expand...
Click to collapse
Flash another kernel ( SIYAH) with ODIN , then flash the rom you want to ....
didin't work...did the same thing:crying: i will try to flash an leaked official jb rom in odin as a base and then flash a custom one in cwm
Didn't work...please help
no one knows what to do?srsly? i want to flash custom roms...that is the hole point of android ffs
I would get a stock image from sammobile and flash the phone back to stock and start again.
vladtdr said:
Didn't work...please help
Click to expand...
Click to collapse
Don't panic,follow the steps:
1-Root e recovery with cf-root
2-download rom ( zip.packages) If you see any error messages or the procedure stops, then the packet of cooked rom may be corrupted.
Re-download and re-install from the beginning..
3-If the first boot takes more than 20-30 minutes, manually restart the phone by removing the battery or by pressing and holding for 10 seconds the power button.
If the problem persists, perform a hard reset .
4-If the phone restarts all the time, back in recovery mode and re-install, also performing the hard reset.
5-If your phone will not boot up, go into download mode and try to install a firmware via odin, performing a hard reset.
i tried installing a stock rom then flashing over that i have installed a ics one and jb one...didn't work...the problem is not with the booting itself but with the flashing like i said every rom flashes in like 5 seconds...it tells me it;s done and everything went fine but when i reboot i can't get past the samsung logo before the boot animation, so practically the rom doesn't flash...i dont know why...odin works great....but i can't flash through CWM. I wanted to try TWRP recovery also but i can't seem to find one for the international version of SGS3...Please help:crying:
Flash via recovery requires CF Root ,
ROOT
http://forum.xda-developers.com/showthread.php?t=1684535
Odin flash is much longer than 5 seconds and short flash is probably wrong file /faulty file .
jje
i have flashed cf root after flashing stock roms both jb and ics and it didint work...i tried to flash like 7 different roms in ics both based on jellybean and ics...i wiped all everytime...
vladtdr said:
i tried installing a stock rom then flashing over that i have installed a ics one and jb one...didn't work...the problem is not with the booting itself but with the flashing like i said every rom flashes in like 5 seconds...it tells me it;s done and everything went fine but when i reboot i can't get past the samsung logo before the boot animation, so practically the rom doesn't flash...i dont know why...odin works great....but i can't flash through CWM. I wanted to try TWRP recovery also but i can't seem to find one for the international version of SGS3...Please help:crying:
Click to expand...
Click to collapse
I really don't think the ROM caused your recovery to not work correctly. Have you tried a different recovery, likE https://play.google.com/store/apps/...DEsImNvbS5mcmFnZ2VsLnJlY292ZXJ5ZXhlY3V0ZXIiXQ..
devid801 said:
I really don't think the ROM caused your recovery to not work correctly. Have you tried a different recovery, likE https://play.google.com/store/apps/...DEsImNvbS5mcmFnZ2VsLnJlY292ZXJ5ZXhlY3V0ZXIiXQ..
Click to expand...
Click to collapse
i will try this now and report back...and if it's worh mentioning, i had an s2 that did the SAME EXACT thing...i could never sort it out and i sold it...
this app did nothing just rebooted in cwm where it gave me an error...
vladtdr said:
this app did nothing just rebooted in cwm where it gave me an error...
Click to expand...
Click to collapse
WHAT ERROR ? PUBLISH THANKS ....Also any errors from the recovery during the flash you should publish if there are .....
devid801 said:
WHAT ERROR ? PUBLISH THANKS ....Also any errors from the recovery during the flash you should publish if there are .....
Click to expand...
Click to collapse
it says that it can't flash the file and that a log file has been generated...ofc i am freaking out the hole point of android are custom roms and if i can;t install one owning an s3 is pointless...usually it doesent give error i told u guys it finishes like normal only problem is it takes5-10 sec..and then bam, the only error was with the app you sugested
try using a different recovery
slaphead20 said:
try using a different recovery
Click to expand...
Click to collapse
Use a different/older recovery..if you are using touch version use the non-touch version of vice-versa..just flash the recovery tar file in Odin..
make sure phone is gt9300
GR0S said:
make sure phone is gt9300
Click to expand...
Click to collapse
zoot1 said:
Use a different/older recovery..if you are using touch version use the non-touch version of vice-versa..just flash the recovery tar file in Odin..
Click to expand...
Click to collapse
slaphead20 said:
try using a different recovery
Click to expand...
Click to collapse
I did all of that i tried CF-root recovery 6.0.1.2 touch and non-touch recovery and i am sure that my phone is the unlocked international version i9300...
vladtdr said:
it says that it can't flash the file and that a log file has been generated...ofc i am freaking out the hole point of android are custom roms and if i can;t install one owning an s3 is pointless...usually it doesent give error i told u guys it finishes like normal only problem is it takes5-10 sec..and then bam, the only error was with the app you sugested
Click to expand...
Click to collapse
There is some protection with some cwm that allow script only with ROM Manager
as you can see there is no error in the log, so i can't do nothing.
Now try to ADB Push a ROM to your phone.....
Every ROM zip file I attempt to flash via CWM or TWRP doesnt work. I was on stock ICS (4.0.4) which I flashed using Odin. Every JB rom, stock or custom I attempt to flash with a recovery freezes either at boot up or first screen of initial setup. No errors are given on actual flash, it always looks good. . I wiped everything I can wipe, which is everything but emmc I think. What could be the problem? I have now flashed official JB through Odin twice with no issues.
Do you check that the ROM is downloaded properly by checking the md5 hash?
EVOO2 said:
Every ROM zip file I attempt to flash via CWM or TWRP doesnt work. I was on stock ICS (4.0.4) which I flashed using Odin. Every JB rom, stock or custom I attempt to flash with a recovery freezes either at boot up or first screen of initial setup. No errors are given on actual flash, it always looks good. . I wiped everything I can wipe, which is everything but emmc I think. What could be the problem? I have now flashed official JB through Odin twice with no issues.
Click to expand...
Click to collapse
Try flashing a new recovery using odin then try to flash the rom in recovery afterwards.
Sent from my SGH-T989 using Tapatalk
richardlibeau said:
Try flashing a new recovery using odin then try to flash the rom in recovery afterwards.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Ive flashed twrp 2.5 twice through odin and then tried to flash a rom with no improvement. Im really stumped 'cause flashing roms with odin works fine everytime, so it would seem nothings physically wrong with my device. Should I try a different recovery program? Using cwm and twrp give the same result, so Im skeptical a third recovery would be any different.
cheers
EVOO2 said:
Ive flashed twrp 2.5 twice through odin and then tried to flash a rom with no improvement. Im really stumped 'cause flashing roms with odin works fine everytime, so it would seem nothings physically wrong with my device. Should I try a different recovery program? Using cwm and twrp give the same result, so Im skeptical a third recovery would be any different.
cheers
Click to expand...
Click to collapse
Only thing i can think of is look at the file format that youre trying to flash.
Is it zip? tar?
I may be wrong but cwm only works for .zip files from my experience. not .tar md5 etc.
why do you need to flash it via cwm? if its flashing through odin whats the problem?
It sounds like what ^^^^ is saying. Recovery flashes zip files and Odin flashes tar files. Don't confuse the zip files your pc uses to download the files with these.
When using odin I have to use ROM s which are .tar, so this basically limits me to stock ROMS. The custom ROMS are .zip which I can only flash with a custom recovery like twrp or cwm. I'd obviously like to flash the custom ROMS which are .zip , however it isn't working for me as I mentioned in the opening post . Not sure how to fix this problem .
EVOO2 said:
When using odin I have to use ROM s which are .tar, so this basically limits me to stock ROMS. The custom ROMS are .zip which I can only flash with a custom recovery like twrp or cwm. I'd obviously like to flash the custom ROMS which are .zip , however it isn't working for me as I mentioned in the opening post . Not sure how to fix this problem .
Click to expand...
Click to collapse
extraxt the rom that your saying is .zip. it "should" extract a file that will be something odin will recognize
dweeezy said:
extraxt the rom that your saying is .zip. it "should" extract a file that will be something odin will recognize
Click to expand...
Click to collapse
Good idea. In a recovery zip file will be a couple of folders. One of them will have a tar file you can flash in the phone or pda a lot in Odin.
Thanks for the suggestion but I had no luck . I have tried extracting padawan JB and a debloated stock JB rom and they extract many files, folders, apks but no tar I could locate. Also I am not sure even if there was a tar i could use if it would be safe to use. If all this was good, it would still be a cumbersome workaround and wouldnt fix my problem of not being able to get a ROM installed via recovery to work.If I have no choice I'll use odin to flash custom ROMs (if there is a way) but Id rather get it to work with recovery.
EVOO2 said:
Thanks for the suggestion but I had no luck . I have tried extracting padawan JB and a debloated stock JB rom and they extract many files, folders, apks but no tar I could locate. Also I am not sure even if there was a tar i could use if it would be safe to use. If all this was good, it would still be a cumbersome workaround and wouldnt fix my problem of not being able to get a ROM installed via recovery to work.If I have no choice I'll use odin to flash custom ROMs (if there is a way) but Id rather get it to work with recovery.
Click to expand...
Click to collapse
If you're flashing between TW based to AOPS, or pretty much from a rom to a completely different rom, you will need to WIPE your data too, or better, do a complete wipe (factory reset). I had this issue when moving from Stock TW-based rom to Padawan JB rom. I did a factory reset (complete wipe) and it booted fine. But then again, I'm used to TW so I flashed that back.
fbauto1 said:
If you're flashing between TW based to AOPS, or pretty much from a rom to a completely different rom, you will need to WIPE your data too, or better, do a complete wipe (factory reset). I had this issue when moving from Stock TW-based rom to Padawan JB rom. I did a factory reset (complete wipe) and it booted fine. But then again, I'm used to TW so I flashed that back.
Click to expand...
Click to collapse
I've wiped everything I can wipe between flashes (includes factory reset), many times trying both TWRP and CWM for flashing and wiping with no luck unfortunately. The wiping doesnt seem to help, different custom recoveries don't help, so I'm stumped as to what the problem could be.
EVOO2 said:
I've wiped everything I can wipe between flashes (includes factory reset), many times trying both TWRP and CWM for flashing and wiping with no luck unfortunately. The wiping doesnt seem to help, different custom recoveries don't help, so I'm stumped as to what the problem could be.
Click to expand...
Click to collapse
What roms are you trying to flash? Sometimes ive seen where you must rename them or do specific things.
dweeezy said:
What roms are you trying to flash? Sometimes ive seen where you must rename them or do specific things.
Click to expand...
Click to collapse
Ive tried padawan JB, debloated rooted canadian JB rom, and debloated ATT rom.
dweeezy said:
What roms are you trying to flash? Sometimes ive seen where you must rename them or do specific things.
Click to expand...
Click to collapse
Ive tried padawan JB, debloated rooted canadian JB rom, and debloated ATT rom.
OP, are you still having this issue? Were you able to resolve it?
I have the exact same issue as you. Exactly the same.
513263337 said:
OP, are you still having this issue? Were you able to resolve it?
I have the exact same issue as you. Exactly the same.
Click to expand...
Click to collapse
Me too. Every rom freezes during the app optimization screen...usually at about 3/4th the way through. What's going on???
*edit* Tried to restore factory w/Odin. I'm bricked now. Time for some JTAG love.
Exactly the same issue here.
Every jelly bean ROM, 4.1 or 4.2, stock or custom, as long as I install them via recovery, it either doesn't boot up or gets stuck on the first screen.
If I use ODIN to install the stock ROM, it works fine.
Driving me nuts...
Just throwing suggestions out there but try sideloading the rom and see if itll install that way? Also are you odin flashing recovery? Maybe try to load twrp through goomanager and see if maybe recovery is corrupted?
Sent from my SAMSUNG-SGH-I717 using xda premium
Hi everyone.
i rooted my phone with this guide which installed a based CWM recovery on my phone with Siyah-s2-v6.0b4.tar using Odin.
Now i want to run a touch CWM recovery but no matter how i tried- no way worked and i always get the based CWM recovery again.
I tried ROM manager and RECOVERY tools but none of these actually worked (although i got success messages).
I also tried to download the recovery file from the official site of CWM, but when i tried to copy it to my sd card an error message popped out saying copy can't be done and the device is not connected or working or something.. i can copy other zip files without any problem.
can anyone help?
thanks.
1) Do not use Rom Manager with the SGS2. It will break recovery and/or cause bootloops eventually. It may even brick your phone. You don't need it.
2) Any recovery flashed independently of the kernel on the SGS2 will only persist until the next reboot, which is why what you're trying isn't working. If you want a touch version of CWM, flash/run a kernel which has this. Which kernels ? Read the kernel threads in the development section (I don't use PhilZ on my SGS2, but his comes to mind as I use it on my I9505).
heywebi
MistahBungle said:
1) Do not use Rom Manager with the SGS2. It will break recovery and/or cause bootloops eventually. It may even brick your phone. You don't need it.
2) Any recovery flashed independently of the kernel on the SGS2 will only persist until the next reboot, which is why what you're trying isn't working. If you want a touch version of CWM, flash/run a kernel which has this. Which kernels ? Read the kernel threads in the development section (I don't use PhilZ on my SGS2, but his comes to mind as I use it on my I9505).
Click to expand...
Click to collapse
thank you very much! i'm relieved i didn't brick my phone, that could have been a mess..
flashing kernels is like regular flashing? just installing the zip file? do i need to wipe any data or cache or something?
thanks for your response.
Follow the flashing instructions for the kernel in question to the letter (always on the first page of the kernel thread, always very clear/precise/easy to follow).
MistahBungle said:
.... I use it on my I9505).
Click to expand...
Click to collapse
In that case, great to still see you in the s2 forums
Sent from a galaxy far, far away
Hi, i'm new in these things so have a few questions.
Iwould like to flah thecyanogenmod but my galax 2s syas it is not a gt-I9100.
So i read some things about removing the assert line from a script and so on.
Do i need to flah an older rom before the cm11 nightly?
Do i need to flash the kernel first? or just use the latest cwm? (or rom manager/clockword?)
Can i reflash the S2 with an cyanogenmod kitkat version after i flashed it with an other kitkat rom for this device?
(still i did not succed to flash any rom to it)
thanks for any help !
JJSJJS said:
Hi, i'm new in these things so have a few questions.
Iwould like to flah thecyanogenmod but my galax 2s syas it is not a gt-I9100.
So i read some things about removing the assert line from a script and so on.
Do i need to flah an older rom before the cm11 nightly?
Do i need to flash the kernel first? or just use the latest cwm? (or rom manager/clockword?)
Can i reflash the S2 with an cyanogenmod kitkat version after i flashed it with an other kitkat rom for this device?
(still i did not succed to flash any rom to it)
thanks for any help !
Click to expand...
Click to collapse
First of all check if it g version or not.
To best of my understanding you can install it directly as far as you are rooted.
Sent from my GT-I9100 using xda premium
You don't need to flash an older version before KK. You just need KK compatible recovery. Or you can flash a KK compatible kernel, reboot to recovery and flash your KK rom.
Hello, thank you both for your replies.
Finally some clear answers
The model says GT-I9100 and not with g behind it, thanks.
I found some things about the status 7 error and about removing some line in a script in the zip.
So i will try the kitkat recovery (in my understanding this is also the kernel?) and then flash it with kitkat rom.
I would like to flash the one from cyangenmod, but doe it really mather which custom kitkat rom i take? At least they are all without the providers code like Vodafone or others?
Thanks again. I will update the thread if it succeeds or not.
Hi,
so i could not install the latest Recovery_CWM_6.0.4.7_I9100.zip as it gave an error E: signature verification failed.
then i tried recovery-clockwork-touch-5.8.1.5-galaxys2.zip and this works. But with this i can't install CM11. as i get the status 7 error.
So i will try some other versions kitkat compatible.
I also took a look at the kernels section but it is not clear wich one to use for CWM6 as i don't know what XXLSR or DDLS3 means, and which is correct for Netherlands.
Do you have any idea? (i am not allowed to post there yet)
Thanks for your help.
For choice of kernel -
1. Gustavo's - I don't remember the version. Check the op.
2. Dorimanx - you can try 10.43v100.
3. Apollo - 7.0b Cm
They will bring the KK compatible recovery you want on your phone. Then after rebooting to recovery you can flash any custom rom as they are not locked by any carriers.
banjara said:
For choice of kernel -
1. Gustavo's - I don't remember the version. Check the op.
2. Dorimanx - you can try 10.43v100.
3. Apollo - 7.0b Cm
They will bring the KK compatible recovery you want on your phone. Then after rebooting to recovery you can flash any custom rom as they are not locked by any carriers.
Click to expand...
Click to collapse
Thank you very much Banjara !
i'll keep trying, will report if i succeed
oh oh no good.....
JJSJJS said:
Thank you very much Banjara !
i'll keep trying, will report if i succeed
Click to expand...
Click to collapse
oh boy oh boy
i followed this http://forum.xda-developers.com/galaxy-s2/development/kernel-lazing-safe-stock-kernels-t2293576
and now it is stuck on boot screen, can't even reboot in recovery mode to get the back rom back pfffff
what should i do now......even the usb cable aint working, i'm flashing to the external sdcard via an other phone and the replace the sdcard to the galaxy s2
thanks for any help :crying::crying::crying::crying::crying:
JJSJJS said:
oh boy oh boy
i followed this http://forum.xda-developers.com/galaxy-s2/development/kernel-lazing-safe-stock-kernels-t2293576
and now it is stuck on boot screen, can't even reboot in recovery mode to get the back rom back pfffff
what should i do now......even the usb cable aint working, i'm flashing to the external sdcard via an other phone and the replace the sdcard to the galaxy s2
thanks for any help :crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
If you are able to go back to download mode
1. Flash a stock rom via odin
2. Flash a custom kernel via Odin. You might find some in the link you put there or you can search for hirox kernel. Remember, you have to download Odin flash able kernel and follow the op.
3. Once you have custom kernel, reboot to recovery. Flash any of the kernels in clockworkmod mentioned in my previous post.
4. Reboot to recovery. Flash your rom.
If you are unable to go to download mode try all the methods mentioned in the below link to bring it back to normal. It will need patience and perseverance. http://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Thank you for your patience and your help Banjara.
This forum and it's people are 100 times better the on Gyanomed were totally no support is given...
I will try it and come back, at least the phone able to start in the download mode.
Probably the usb connector has some loose contacts as i can get no contact with pc.
I got this phone from my brother and he told me that it never worked, just loading the battery
So i tried an other cable from an cheap android pad, but also no luck
maybe tommorow, i have another cable from an android stick pc at my job, maybe it will work
else i have to open it to check the connector under a microscope and probably resolder(hotair) it with a lot of flux... what a pitty... :crying:
lucky i have some experience on it, i repaired a lot of qtek phone, some years ago, always that connector broken.
I'm originally an tv(crt,lcd,plasma) repair technician, but now on an other job
Pfew, i managed to rsolder the connector with help of the microscope on my job.
I could even connect to odin. so that's is good progression. i had a wrong kernel downloaded, so it failed.
now i have the correct one and will use Siyah-s2-v6.0b5.tar
But unfortunately the battery is really emptying quickly when it stays in the phone, i don't know why.
So i will have to charge it an then give it another try with this kernel.
The ROM should still be original as i did not flash it before, just the kernel.
The phone is now saying battery empty, can't download.
To be continued...
Jippieeee!
GREAT !!!!
It worked! flashed the kernel Siyah-s2-6.0b5 and it started ! :victory:
Now what is the best way to proceed, there are so many topics on this it is overwhelming.
Should i first flash a Kernel or first a rom?
Can i flash them right after each other? (kernel reboots) so ROM and directly Kernel in one go?
thanks for your help!
{SOLVED}
Ok this is solved, thank you guys and dolls !
i managed to flash the cwm 6++++ and then the OMNI kitkat (latest) and the gAPPs
and it is working ! i am verry happy ! :laugh::laugh::laugh::laugh::laugh:
:thumbup::beer::beer:
one more thing
i noticed there is also another kernel now in the phone.
How to get rid of the yellow exclamation mark?
i saw some footage on youtube how to do it with the correct kernel.
But can i also extract the kernel from the ROM.tar i used and flash it with Odin?
Or is there another way?
thanks for your help. ---> edit
ok found some here: http://forum.xda-developers.com/galaxy-s2/orig-development/30-10-2012-k-la-lp-t1103399
but is it also good enough to unroot your device or are some functionality's then lost when using OMNI- rom ?
Thanks for your help
there arent any funcions lost it just gives your phone informations so that it thinks its all fine and dont displays the yelow horror . Btw i used TWRP KK kernel on my gs2 and installed prerooted rom aosp neatrom 5.8 kk and dont have problems with triangle. Also neatrom 4.1.2 with extended battery life is there if you dont like kitkat =D
Radelos said:
there arent any funcions lost it just gives your phone informations so that it thinks its all fine and dont displays the yelow horror . Btw i used TWRP KK kernel on my gs2 and installed prerooted rom aosp neatrom 5.8 kk and dont have problems with triangle. Also neatrom 4.1.2 with extended battery life is there if you dont like kitkat =D
Click to expand...
Click to collapse
Thanks Radelos, then i will try to unroot it again. And that will be it then.
Now using the OmniKK nightly of 8th of june, it runs very smooth, no issues till now, all is working well. :good:
btw idk what is the exact rom your willing to use but for no triangle would also do an clean install of stock rom, then root with framroot that you can find here on site and then flash KK compatible recovery and ofc kk rom with it. Here is the rom i used, its prerooted and on first boot starts direct into recovery so its for lazy ppl =D factory format data/system then flash TWRP touch recovery and in cwm reboot recovery option. And then just flash rom
Rom
http://uloz.to/x13p4YVr/drhd-base-lpq-re-light-tar
KK TWRP touch recovery
http://uloz.to/xyw9UkTk/kk-kernel-21-04-twrp-zip
Radelos said:
btw idk what is the exact rom your willing to use but for no triangle would also do an clean install of stock rom, then root with framroot that you can find here on site and then flash KK compatible recovery and ofc kk rom with it. Here is the rom i used, its prerooted and on first boot starts direct into recovery so its for lazy ppl =D factory format data/system then flash TWRP touch recovery and in cwm reboot recovery option. And then just flash rom
Rom
http://uloz.to/x13p4YVr/drhd-base-lpq-re-light-tar
KK TWRP touch recovery
http://uloz.to/xyw9UkTk/kk-kernel-21-04-twrp-zip
Click to expand...
Click to collapse
So with this process, will there be no yellow triangle?
Hai.
I have a galaxy note 3 sm n9005. Have already rooted by finding forum from xda and even install twrp recovery following the guides given.
But im trying to install custom rom. And tried all the roms tat is given from xda for note 3 and could install single one.
Please help to resolve this problem. Im confuse.
Tq.
Not enough details.
It's probably the version of recovery you're using.
Which version of TWRP and what errors are you receiving?
es0tericcha0s said:
Not enough details.
It's probably the version of recovery you're using.
Which version of TWRP and what errors are you receiving?
Click to expand...
Click to collapse
Im using twrp 3.0.2.1 and everytime i try to install a rom it stuck at samsung screen.
And it show md5 not found.
What roms have you tried? What firmware were you on before you started flashing? Sometimes newer roms need the newest firmware like the bootloader and modem to run correctly. Are you wiping system, data, and both caches? If you are going from a Touchwiz rom to, say, a CM based, it might also be necessary to wipe the internal storage. Of course you should back all that up to a PC first, if you do that.
es0tericcha0s said:
What roms have you tried? What firmware were you on before you started flashing? Sometimes newer roms need the newest firmware like the bootloader and modem to run correctly. Are you wiping system, data, and both caches? If you are going from a Touchwiz rom to, say, a CM based, it might also be necessary to wipe the internal storage. Of course you should back all that up to a PC first, if you do that.
Click to expand...
Click to collapse
Resurrection remix.unicorn.slim.and all cynogen rom is working. Im trying install s7edge custom rom for darkwolf and darklord. I even updated the bootloader and modem according to tutorial. I used odin to flash them..
N9005xxugboa1
Lrx21v.n9005xxugbob6
I have my stock rom n internl backed up. I try all. And still it always stuck on samsung screen.
Are you installing the kernel after the rom flash? A lot of newer Samsung roms don't have the kernel built in like CM roms.
es0tericcha0s said:
Are you installing the kernel after the rom flash? A lot of newer Samsung roms don't have the kernel built in like CM roms.
Click to expand...
Click to collapse
How can install kernel after. Everytime i install it reboots its self to samsung screen. Or should go back to recovery and install the kernel back. And thank you for your help till now.
That's definitely why it's not booting, if you didn't do the kernel. If the rom has the Aroma installer, typically the last question asks if you want to reboot now and has a check mark in by default. Just uncheck and it'll go back to recovery. But you can also just go back and flash now and should be good.
es0tericcha0s said:
That's definitely why it's not booting, if you didn't do the kernel. If the rom has the Aroma installer, typically the last question asks if you want to reboot now and has a check mark in by default. Just uncheck and it'll go back to recovery. But you can also just go back and flash now and should be good.
Click to expand...
Click to collapse
I have uncheck the reboot after install. When i install the rom it automatically reboot itself. It doesnt show anything or show done. Once it even show os not found.
Hi
Where can i install or find the latest kernel
It's in the installation instructions for the rom.
es0tericcha0s said:
It's in the installation instructions for the rom.
Click to expand...
Click to collapse
Hi.
I have found the bootloader and modem for my sm n9005 from the installation instruction for the rom.
I try to flash according to the tutorial.and my baseband didnt change. I try flash using odin 3times.
Im not sure where i did wrong.can u help me
Tq
Remove the battery for 10 seconds. Put it back in and reboot to download mode. Uncheck auto reboot. Flash then check auto reboot and flash again. Should stick.
tq
es0tericcha0s said:
Remove the battery for 10 seconds. Put it back in and reboot to download mode. Uncheck auto reboot. Flash then check auto reboot and flash again. Should stick.
Click to expand...
Click to collapse
Tq
Will try and let you know
sitijohn85 said:
Tq
Will try and let you know
Click to expand...
Click to collapse
Hi
I tried as said and it didnt chnge.
Can i ask bootloader should be at bl and modem should be at cp. Is it correct.
Hi
Thank you for your help.
I did the change on bootloader and modem.
Now im i need to know two more thing.
I download 2 dffernt kind of bootloader n modem.
I flash blxxxxxbpb1 and cpxxxxxboj1..this 2 files were tar.md5 files
Another one which i didnt flash. Blxxxxxxbpb1 and cpxxxxxxxbpb2..this 2 files are tar.tar files..
Can i know whats the different with this 2 files.
One more thing is when i chnge the bootloader and modem will the kernel changes. Or is it different.
Please guide me..im confuse.
Someone might have just mislabeled them. Flashing those will not affect kernel. Different partition of the phone.
Hi
I did change the bootloader n modem.
And even change the kernel as told in the forum. It was note5 port kernel.7.1.0..
After trying to install the darkwolf rom.it was still the same..it did not work.
Please help me
sitijohn85 said:
Hi
I did change the bootloader n modem.
And even change the kernel as told in the forum. It was note5 port kernel.7.1.0..
After trying to install the darkwolf rom.it was still the same..it did not work.
Please help me
Click to expand...
Click to collapse
This is the recommended kernel
https://www.androidfilehost.com/?fid=24572369242687310
Recommended recovery is TWRP 2.8.7.0 not the newer 3.0+
Flash other recovery. Boot to TWRP. Wipe system, data, cache, dalvik. Flash rom. Wipe caches. Flash kernel. Reboot. Should work according to lots of people on the thread for that rom.
Hi.
How flash kernel.
just flash the tar.md5 file or the tar.zip file