Hi guys, my phone is Infocus M2 3G and I have rooted it earlier. Now I accidentally removed some services and now getting errors. I want to flash stock rom so it can be like previous one.
I installed ADB and fastboot in my system.
When I tried the command
Code:
fastboot flash recovery recovery.img
the following error came:
Code:
sending 'recovery' (10240 KB)...
OKAY [ 0.417s]
writing 'recovery'...
FAILED (remote:
Security deny - Err:0x2017
)
finished. total time: 0.430s
I searched and I got to know that this may be because of bootloader lock.
So I tried the command
Code:
fastboot oem unlock
and
Code:
fastboot flashing unlock
For oem unlock it showed unknown command and for flashing unlock it showed all options of fastboot.
I installed Rom Manager and select boot into recovery option, it took me to Android Recovery System 3e.
I have stock rom files downloaded and just want to put stock rom in my phone. Any Ideas that can help?
sumit77seo said:
Hi guys, my phone is Infocus M2 3G and I have rooted it earlier. Now I accidentally removed some services and now getting errors. I want to flash stock rom so it can be like previous one.
I installed ADB and fastboot in my system.
When I tried the command
the following error came:
I searched and I got to know that this may be because of bootloader lock.
So I tried the command and
For oem unlock it showed unknown command and for flashing unlock it showed all options of fastboot.
I installed Rom Manager and select boot into recovery option, it took me to Android Recovery System 3e.
I have stock rom files downloaded and just want to put stock rom in my phone. Any Ideas that can help?
Click to expand...
Click to collapse
You can try putting the stock ROM zip file on the root of your sdcard (As in not located in any sub folders) and renaming the ROM file to update.zip then use the stock recovery to flash the ROM. Let me know if you still have questions!
Related
Hi,
I have flash system.img file by using
Code:
D:\ADB\Android>fastboot flash system d:\backup\flash\system.img
sending 'system' (116302 KB)...
OKAY [114.524s]
writing 'system'...
OKAY [ 47.582s]
finished. total time: 162.108s
It seems normal to me, but the problem arise when I restart the the phone. The phone unable to boot, and when I try
Code:
ADB Shell
It says somethings like "sh" is not found. So I do reboot recovery go to the shell and mount /system. Shockingly there is nothing in there.
I have checked the contents of system.img, and there is a lot of things in there, including the "sh". But it seems fastboot failed to flash the system partition.
Anyone can help me ?
maybe you should tell more info about your device, brand,chipset, etc ?
so people can be more easy to help.
just newbie suggestion, ignore this if its no help xD
Looks like your system image file is corrupted cause its not mounted after loading kernel. What kind of filesystem the image is using?
lolet said:
Looks like your system image file is corrupted cause its not mounted after loading kernel. What kind of filesystem the image is using?
Click to expand...
Click to collapse
The system image is not corrupted, because I can safely flash it using Clockworkmod. The filesystem is yaff2, and I have tried opening it using some software and my file is there. I think the problem lies on fastboot who failed flashing properly.
simple
yokowasis said:
Hi,
I have flash system.img file by using
Code:
D:\ADB\Android>fastboot flash system d:\backup\flash\system.img
sending 'system' (116302 KB)...
OKAY [114.524s]
writing 'system'...
OKAY [ 47.582s]
finished. total time: 162.108s
It seems normal to me, but the problem arise when I restart the the phone. The phone unable to boot, and when I try
Code:
ADB Shell
It says somethings like "sh" is not found. So I do reboot recovery go to the shell and mount /system. Shockingly there is nothing in there.
I have checked the contents of system.img, and there is a lot of things in there, including the "sh". But it seems fastboot failed to flash the system partition.
Anyone can help me ?
Click to expand...
Click to collapse
ur work is simple...just plug in ur phone in fastboot mode...keep a boot.img file in the same folder that that of the fastboot folder....boot.img can be taken from ur STOCK ROM
and type ==
fastboot devices
then ur device will be shown.....
then type
fastboot flash boot boot.img
n its done!
I stuck with my Mate 9 Error mode numbers 11 and 2
MEGHSHAH said:
ur work is simple...just plug in ur phone in fastboot mode...keep a boot.img file in the same folder that that of the fastboot folder....boot.img can be taken from ur STOCK ROM
and type ==
fastboot devices
then ur device will be shown.....
then type
fastboot flash boot boot.img
n its done!
Click to expand...
Click to collapse
I would like to tell you my problem, I have a Mate 9 MHA-L09C605B111 which I did a rebrand a while ago and I'm with CUST 432 and installed the version of Oreo 8.0.0.368, a few weeks ago I received the update 369 via OTA. It was interesting to try; the problem is that I had open bootloader, TWRP Pretorian 3.2.0 and Root, take a terrible decision to do a relock of the bootloader.
After several attempts and letting the battery drain I could enter Fastboot mode, I have the FRP unlocked and I could unlock the bootloader again, the problem is that I can not enter either the TWRP, or to recovery mode, try flashing again the same TWRP I had installed it well but still when I want to enter after passing the Huawei logo it remains on the white screen of ERROR MODE, Func NO: 11 (recovery image) Error NO: (image Failed!) Reading other forums and looking I have been told a lot by Internet that it is necessary to make the Dload method try it but it did not work, I understand that it does not work in this model but I still try it.
I also did a flash with all the files as I found in a tutorial
"When you have system extracted, flash it in fastboot using fastboot flash system system.img.
Do the same with KERNEL, extract and flash to fastboot flash kernel KERNEL.IMG
(BOOT is now split into RAMDISK and KERNEL)
Recovery was split to recovery_ramdisk, recovery_vendor and recovery_vbmeta
Boot was split into ramdisk and kernel
Recovery2 (erecovery) was split into erecovery_ramdisk, erecovery_kernel, erecovery_vendor and erecovery_vbmeta
fastboot flash ramdisk ramdisk.img. Kernel flashed as fastboot flash kernel kernel.img.
Recovery ramdisk as fastboot flash recovery_ramdisk recovery_ramdisk.img "
I'm still stuck on the same screen with error 11 and 2 I made the flash of the recovery that I used when I put version 368 are two MHA_RECOVERY_NoCheck.img and MHA_RECOVERY2_NoCheck.img both give Failed using the command Fastboot flash recovery_ramdisk RECOVERY_XXXX with both the same without using the _ramdisk command is equal I'm still stuck in the same state.
Does anyone have an idea that another method I can try?
I will thank you very much.
You can flash all * .img through ADB and in this case there is a specific order to do it, check several threads but I did not get an answer and search but I could not find anything, it is worth noting that when I flash files I mentioned before all OKAY but on power up it goes back to error 11 and 2 I have been told that it is a partition problem but I could not find something to recover them, there is some method that is missing or maybe an error in the steps I am doing ? I still can not access the TWRP but I can access without problems by ADB.
I have xperia s (st25a) phone with android 4.0.4.
I already have rooted it (SU installed) and bootloader unlocked. Fastboot reports the correct version "5".
However, when I try to install TWRP, it gives the following error:
>fastboot.exe flash boot stock-6.1.A.0.452-twrp-2.4.0.0.elf
sending 'boot' (8124 KB)...
FAILED (remote: The Device must be rooted first)
Why does TWRP think it's not rooted? I have setup SU to grant every root request too!
Another issue - when I try to enter recovery with stock image, my phone gets stuck on boot with Sony logo and I have to remove battery to shut it down. Any ideas why wouldn't stock recovery work?
Thanks much for your help!
Help!
Any one has any ideas to try?
NovaSupreme said:
I have xperia s (st25a) phone with android 4.0.4.
I already have rooted it (SU installed) and bootloader unlocked. Fastboot reports the correct version "5".
However, when I try to install TWRP, it gives the following error:
>fastboot.exe flash boot stock-6.1.A.0.452-twrp-2.4.0.0.elf
sending 'boot' (8124 KB)...
FAILED (remote: The Device must be rooted first)
Why does TWRP think it's not rooted? I have setup SU to grant every root request too!
Another issue - when I try to enter recovery with stock image, my phone gets stuck on boot with Sony logo and I have to remove battery to shut it down. Any ideas why wouldn't stock recovery work?
Thanks much for your help!
Click to expand...
Click to collapse
You would have more luck in your device respective subforum.
http://forum.xda-developers.com/xperia-s
im trying to flash cwm custom recovery rom. fastboot flash recovery <downloaded img> yielded a bootloader variable not supported (error). mfastboot flash recovery <downloaded img> yielded sending 'recovery' <7892 kb>..., okay [0.610s], writing 'recovery'..., okay [1.614s], finished. total time: 2.224s. but when i reboot into recovery, i get the stock recovery.
ive searched around online. ive looked for the stock rom file with no success (using android commander) to rename it. i know it must be there, but this is my first time rooting, unlocking the bootloader, and flashing roms. heck i cant even see the cwm rom written.
being a noobie im probably just missing something very basic and could use some detailed instructions to get past this point (my technical vocabulary in this area is very limited). i'm trying to use manual tools, so id like to stick with learning the manual way please.
btw, when i'm in fastboot mode other than rebooting the phone via 3 finger salute is there a terminal command to get back to adb mode? after flashing, i wanted to go back to adb to issue a reboot command from there. i read my flash might be overwritten as i reboot my the stock rom.
thanks in advance for the help.
Tools being used:
adb
fastboot
Android Commander
The phone:
Motorola Droid Razr HD (CDMA) running 4.1.1 build 9.8.10_39
Rooted via Motochopper
Bootloader unlocked via Motopocalypse
Hi, all.
I was messing around with Android Tweaker 2, zipaligning my apps, performing vague system tweaks and the like, when I rebooted my phone for the changes to take effect; however, the phone booted up, finished the booting animation, and where the home screen should be showing up only showed a black screen. From there I can only reboot again, reboot into STOCK recovery, or reboot into fastboot, which has limited function in an Asus device (inability to flash unsigned custom recovery images, inability to flash rom images, stock firmware images are unavailable ANYWHERE, etc.) My device WAS rooted, however, I did a factory reset from the stock recovery in hopes that the problem would be resolved, so I'm not sure if root access was retained. I've tried a lot of things, but what I need is access to adb to push some files, or just figure out what the hell happened to the device.
Any ideas? Thanks in advance.
Details:
Asus Padfone X [4.4.2 stock rom]
WAS rooted
LOCKED bootloader
STOCK recovery
Fastboot is basically useless, given the "safeguards" Asus has implemented
Read the CM12.1 for instructions on unlocking bootloader , there are instructions on booting from custom recovery using fastboot from there you can adb push the files to your phone as posted in the Nandroid Stock backup thread and install using TWRP.
daggorlad said:
Read the CM12.1 for instructions on unlocking bootloader , there are instructions on booting from custom recovery using fastboot from there you can adb push the files to your phone as posted in the Nandroid Stock backup thread and install using TWRP.
Click to expand...
Click to collapse
Thanks for the advice.
I have consulted the CM12.1 thread, and I see the instructions, the first step of which is to "boot into CWM, CMRecovery, or TWRP." However, I do not have any of these custom recoveries flashed on my Padfone X. Is there a way I can boot custom recovery off an external microsd or something?
Note: upon attempting the "fastboot flash recovery CMrecovery.img" command, the cmd window returns the following:
Code:
target reported max download size of 1879048192 bytes
sending 'recovery' <11220 KB>...
OKAY [ 0.438s ]
writing 'recovery'...
FAILED <remote: can't flash unsigned image>
finished. total time: 0.444s
EDIT: Problem has been resolved, used
Code:
fastboot boot twrp.img
and restored stock.
shattered519 said:
Thanks for the advice.
I have consulted the CM12.1 thread, and I see the instructions, the first step of which is to "boot into CWM, CMRecovery, or TWRP." However, I do not have any of these custom recoveries flashed on my Padfone X. Is there a way I can boot custom recovery off an external microsd or something?
Note: upon attempting the "fastboot flash recovery CMrecovery.img" command, the cmd window returns the following:
Code:
target reported max download size of 1879048192 bytes
sending 'recovery' <11220 KB>...
OKAY [ 0.438s ]
writing 'recovery'...
FAILED <remote: can't flash unsigned image>
finished. total time: 0.444s
EDIT: Problem has been resolved, used
Code:
fastboot boot twrp.img
and restored stock.
Click to expand...
Click to collapse
Glad I was able to point you into the right direction.
Hi all,
I have a small problem, my phone does not boot and hanging on Logo. Now i can boot to fastboot menu, but i cannot really use it since i have FRP lock . Is there any chance to baypass it to make possible to flash recovery boot.img ?
When i try any command getting this error :
Code:
target reported max download size of 266338304 bytes
sending 'revocery' (4096 KB)...
OKAY [ 0.142s]
writing 'revocery'...
FAILED (remote: Necessary to unlock FRP! Navigate to Settings > Develope
finished. total time: 0.154s
Since my phone not booting i cannot use this option Please help
Hi, back again
As i can see, try not to mess with the names :revocery...
When you want to flash the boot.img don't change that name.
Just flash it like : fastboot flash boot boot.img
Use my last boot.img which i sent you. That's a good one out of my backup.
For the FRP (perhaps edit your thread tiltle ) i have no answer in a minute. Did the "fastboot oem unlock" gave anything better ?
raystef66 said:
Hi, back again
As i can see, try not to mess with the names :revocery...
When you want to flash the boot.img don't change that name.
Just flash it like : fastboot flash boot boot.img
Use my last boot.img which i sent you. That's a good one out of my backup.
For the FRP (perhaps edit your thread tiltle ) i have no answer in a minute. Did the "fastboot oem unlock" gave anything better ?
Click to expand...
Click to collapse
I have try also boot , try everything, not matter if youhave FRP lock fastboot oem unlock is only to unlock bootloader, which i have, that is not a problem.
See if this method works for you
http://forum.xda-developers.com/showthread.php?t=3261846
Sent from my Nexus 6 using Tapatalk
joyrida12 said:
See if this method works for you
http://forum.xda-developers.com/showthread.php?t=3261846
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
You cannot use this method since i have only FastBoot feature, adb is not possible to use, since phone never boot. This method can be used only for phones what can boot correctly, so unfortunately useless for me. but thx for link
michalss said:
You cannot use this method since i have only FastBoot feature, adb is not possible to use, since phone never boot. This method can be used only for phones what can boot correctly, so unfortunately useless for me. but thx for link
Click to expand...
Click to collapse
i have exactly the same problem. FRP is locked but my phone doenst boot. so how can i unlock the frp with the fastboot mode?
stiggu said:
i have exactly the same problem. FRP is locked but my phone doenst boot. so how can i unlock the frp with the fastboot mode?
Click to expand...
Click to collapse
same problem on my mate s
good to know that adb is not working for others
i thaught it was just me
I've the same problem , any idea ??
michalss said:
Hi all,
I have a small problem, my phone does not boot and hanging on Logo. Now i can boot to fastboot menu, but i cannot really use it since i have FRP lock . Is there any chance to baypass it to make possible to flash recovery boot.img ?
When i try any command getting this error :
Code:
target reported max download size of 266338304 bytes
sending 'revocery' (4096 KB)...
OKAY [ 0.142s]
writing 'revocery'...
FAILED (remote: Necessary to unlock FRP! Navigate to Settings > Develope
finished. total time: 0.154s
Since my phone not booting i cannot use this option Please help
Click to expand...
Click to collapse
activate "Developer options"
playing several times "compilation"
go to options and enable developer
"Enable OEM unlock"
Hey , the problem is the device won't boot , so how can we enable developer option?!!!!
Sent from my iPhone using Tapatalk
There was a time when xda where the place to get the right answer and quick!
nowadays most topics are full of people with same problem and no dev to come to help, pity.
on topic: I have the same problem, ( mine is a Y6 pro) and before bricking it I had debugging and oem unlock enabled but now can't flash boot etc using fastboot ( error , denied ..) and can't use spflashtools either : preloader vcom appears for 1 second and then disappears and phone turns on.
tried many drivers, 3 Os'es (7, 8.1 ,10) still no luck.
porcha18 said:
activate "Developer options"
playing several times "compilation"
go to options and enable developer
"Enable OEM unlock"
Click to expand...
Click to collapse
Danke!!!!!!!!!!!!! Nach ewigem Suchen diese einfache Lösung. Vielen Dank!! Tag gerettet
the same issue
Good day, i have the same issue on my p9 EVA-L19.
FRP lock. And i can't do anything...
My warranty says that they cannot recover data from the phone, but the information is very important. I need to unlock FRP and somehow boot into TWRP or something to recover my data.
Please help someone if you had a same issue and results.
For the Huawei Y6 you can return to Stock.
Try to fastboot boot recovery-twrp.img and put your stock firmware (dload) folder to the rootdir at your sdcard.
Reboot your device to bootloader and hold down vol+ + vol- and use the command: fastboot boot stockrecovery.img (keep the keys pressed until the stock recovery comes up and starts installing your stock rom.
You will see an emui logo and the recovery will install the complete stock rom if you did everything right.
Retry to boot the stock recovery with this way if it is not working at the first try.
EDIT: after i wiped /system and and all the other stuff i was able to flash stock recovery via fastboot.
Runner85sx said:
For the Huawei Y6 you can return to Stock.
Try to fastboot boot recovery-twrp.img and put your stock firmware (dload) folder to the rootdir at your sdcard.
Reboot your device to bootloader and hold down vol+ + vol- and use the command: fastboot boot stockrecovery.img (keep the keys pressed until the stock recovery comes up and starts installing your stock rom.
You will see an emui logo and the recovery will install the complete stock rom if you did everything right.
Retry to boot the stock recovery with this way if it is not working at the first try.
EDIT: after i wiped /system and and all the other stuff i was able to flash stock recovery via fastboot.
Click to expand...
Click to collapse
Is there a way to do this on a mac?
Ive got adb enabled on terminal and I have a recovery.img file in my downloads though Im not sure if its the right one.
I typed in fastboot devices and then fastboot flash recovery recovery.img but it said cannot load recovery.img
anditan said:
Is there a way to do this on a mac?
Ive got adb enabled on terminal and I have a recovery.img file in my downloads though Im not sure if its the right one.
I typed in fastboot devices and then fastboot flash recovery recovery.img but it said cannot load recovery.img
Click to expand...
Click to collapse
your recovery location in adb is wrong probably. try changing it to the correct path. atleast thats what worked for me
man u can'T do anything because FRP is ACTIVATED !!!
No solution till now
Use the Huawei Swype bypass Method
michalss said:
Hi all,
I have a small problem, my phone does not boot and hanging on Logo. Now i can boot to fastboot menu, but i cannot really use it since i have FRP lock . Is there any chance to baypass it to make possible to flash recovery boot.img ?
When i try any command getting this error :
Code:
target reported max download size of 266338304 bytes
sending 'revocery' (4096 KB)...
OKAY [ 0.142s]
writing 'revocery'...
FAILED (remote: Necessary to unlock FRP! Navigate to Settings > Develope
finished. total time: 0.154s
Since my phone not booting i cannot use this option Please help
Click to expand...
Click to collapse
Try to do:
fastboot boot recovery.img
This will boot up the device with the given image. With that you can put a custom rom to your sd-card and flash it.
I will upload a Nandroid (stock system, recovery, boot) from my Y6 SCL-L01 soon.
With that you can restore boot and recovery with twrp. For this way you don't need to have a frp unlock.
Procedure:
fastboot boot recovery-twrp.img
Put your stock firmware (dload folder) to the sdcard.
Put my Nandroid to your sdcard.
Restore my Nandroid, reboot your device with Vol+ and Vol- pressed.
This way only works for SCL-L01 up to SCL-L04.
I need to create an extra recovery.img that includes a dt image that fits for all SCL variants.
Work in progress...
I have just removed frp today, but its not free method, unfortunately