Related
Hi when i use my xperia x10 on charge the fone gets warm and reaches temp of 43 degrees what could be the problem cheers waj
yes it was my problem too before... did you factory reset or repair from PC companion or updated your rom if so you must root your phone install xrecovery and wipe batterystats.bin.. thats how i got the solution and bring to normal charging with my phone.
and also install battery calibration to calibrate your battery and phone again..
Is your phone updated to gingerbread?
If not you may have an old baseband, if so you should get it updated with the rooted version in the development area or update using SEUS or PC companion.
Nucleus55 said:
and also install battery calibration to calibrate your battery and phone again..
Click to expand...
Click to collapse
That might be the reason for the overheating, make sure you don't switch batteries on the x10, I did that recently because the USB port of a friend's phone was broken, now my battery acts all weird and when i first put my battery back into my phone it got hot aswell, for the first time ever.
Nucleus55 said:
yes it was my problem too before... did you factory reset or repair from PC companion or updated your rom if so you must root your phone install xrecovery and wipe batterystats.bin.. thats how i got the solution and bring to normal charging with my phone.
^
ok tanx mate will try and tell you what happens
and also install battery calibration to calibrate your battery and phone again
already tryed that mate thanks
TheRuan said:
Is your phone updated to gingerbread?
If not you may have an old baseband, if so you should get it updated with the rooted version in the development area or update using SEUS or PC companion.
Click to expand...
Click to collapse
i have baseband 71
Click to expand...
Click to collapse
So, sort of long story, i'll cut it short
-Got an old X10, had stock 2.3.3
-Rooted it
-Did not unlock bootloader, got kinda scared.
-Tried to install FeraLab custom ROM, it failed probably because of sdcard permissions; i accidentally wipe /system /data /cache
-stuck at first Sony Ericsson screen
-Somehow managed to flash a 2.1 stock rom with flashtool, after an hour of different combinations of enterring flash mode and pulling the battery
-Tried to install FeraLab again, this time it went through
-After install, rebooted, phone shut down during boot up process
-Will not turn on at all. Even when plugged into a PC, wall, not plugged in, pulling battery, etc.
I think what happened is that FeraLab needed a newer baseband than the 2.1 stock rom had. Does anyone have any suggestions on how to get this sucker to even turn on? Not a single LED is on when plugged in, giving me the impression that it's not charging.
If the battery has drained out, it might take some time before it kicks in and indicates that it is charging.
If the ROM has failed somehow, it might not show that it is charging at all, but might be charging.
Either way: Let it charge "blindly" for a while, and see what happens.
Once it does boot up to some level or shows life-signs, let it charge fully before you'l attempt a ROM flash.
The flash/recovery mode needs a full battery, and reason is that the external power isn't used even when connected while in flash/recovery mode.
If you happen to be in bad luck, and the ROM failed as a result of a drained battery, you might have to charge the battery externally. Use an external battery charger made for 3.6 volts Lithium Polymer batteries, and make sure to align the + and - terminals properly.
I can recommend the multicharger from Powerbase, called C-734U:
http://www.powerbasehk.com/product.php?id=148
Using it myself to charge the X10 battery, as well as other batteries from other devices I have.
EDIT:
(For some reason, powerbase has taken back that it'll charge Lipo batteries, but when I bought mine, it was described as a li-ion, li-poly and Ni-MH charger, and it't ability to charge li-poly batteries was the very one reason to why I bought it.
I suspect PowerBase does not want to take responsibility if anything happens to the li-poly-batteries, as they are known to be more dangerous than other types.)
I've left it on the wall charger all night, no response or anything. Luckily, I bought a new battery a few days ago, so when that comes in, hopefully it will be charged enough for this thing to boot.
Do me a favour are u able to take screebshot of settings, about phone menu and post it here? Need to see ur baseband and kernel
Sent from my X10i using XDA
laneyofdeath said:
Do me a favour are u able to take screebshot of settings, about phone menu and post it here? Need to see ur baseband and kernel
Sent from my X10i using XDA
Click to expand...
Click to collapse
Dude his phone wont start up. How come he'll be able to take a screenshot
Sent from my LT26i using xda premium
king-iyokan said:
Dude his phone wont start up. How come he'll be able to take a screenshot
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Yeah, i'm not sure what he expected. But, good news! Now for some reason my phone started blinking red whenever I tried to turn it on! I guess the battery completely ran out or something. It also blinks every now and then when plugged in, so I guess it's charging. The previous owner of this phone said that it had some battery problems, so that's why I ordered that new battery. I'll let it charge for awhile and let you guys know what happens.
Okay, after getting my new battery, the phone will still not turn on. I think i've figured out two behaviors:
1. If the battery is nearly completely out of charge, it will flash a red light
2. If the battery has charge, it will not do anything at all.
Anyone know how to fix this?
While trying to turn on the phone, after long-press power button, do you get a flash from status led & short vibration?
From my XPERIA X10S v8.2 on kCernel @ 1.19ghz
ToledoJab said:
While trying to turn on the phone, after long-press power button, do you get a flash from status led & short vibration?
From my XPERIA X10S v8.2 on kCernel @ 1.19ghz
Click to expand...
Click to collapse
No vibration, the red LED flashes three times, and that is , as I said before, what happens when the battery seems to not have any charge. If I have a charged battery it does absolutely nothing.
Have you removed sim & sd card and tried. I know it sounds dumb but when I flashed a bad kernel I had to try to connect flash mode like 10 times. Finally I left the phone unplugged from pc, started flashtool and started flashing. I only put battery in phone just before holding back key. I never connected USB until tool said to dis-connect phone and connect in flashmode.
i wish you luck, I know how I felt when it went wrong
From my XPERIA X10S v8.2 on kCernel @ 1.19ghz
FireFreek said:
So, sort of long story, i'll cut it short
-Got an old X10, had stock 2.3.3
-Rooted it
-Did not unlock bootloader, got kinda scared.
-Tried to install FeraLab custom ROM, it failed probably because of sdcard permissions; i accidentally wipe /system /data /cache
-stuck at first Sony Ericsson screen
-Somehow managed to flash a 2.1 stock rom with flashtool, after an hour of different combinations of enterring flash mode and pulling the battery
-Tried to install FeraLab again, this time it went through
-After install, rebooted, phone shut down during boot up process
-Will not turn on at all. Even when plugged into a PC, wall, not plugged in, pulling battery, etc.
I think what happened is that FeraLab needed a newer baseband than the 2.1 stock rom had. Does anyone have any suggestions on how to get this sucker to even turn on? Not a single LED is on when plugged in, giving me the impression that it's not charging.
Click to expand...
Click to collapse
Try to flash any latest kernel via flashtool . Go for doomkernel . I think its software issue . Try this first .
Almost same here please help..
Last night battery ran out of charge & phone switched off.. then i plugged the charger it doesn't charge.. after some time i tried turning on.. Vibrates with the green LED but nothing happens then..
Note: This is not the 1st time i'm letting my phone drain, but facing this problem for the 1st time..
Rom : Spikelabs GB Gaming rom
Kernel : Ferakernel v23 beta6
I tried another battery, charger, data cable.. Tried flashing stock & spikelabs kernel., but of no use..
Any help is greatly appreciated..
Thanks in advance.. :good:
Something like that happened to me not long ago!
I was trying to flash some ROMs and I messed up then my phone wouldn't turn on!
But Miracously, I could flash a Stock 2.3.3 which fixed the problem!
At first, I used Sony PC Companion, which helped a lot- and after I screwed it for the second time, I used FlashTool-
I don't know if this was helpful, but I hope your x10 will be fixed soon!
yeah try the PC Companion first, it helped me too a couple of weeks ago
No luck...
Hi friends..
Tried to repair using PC companion, but was able to connect only in flash mode, unable to proceed software update..
I previously tried flashing stock GB using flashtool thrice. Still couldn't switch on the phone.. What else may i try..
Thanks friends..
ashok weird said:
Hi friends..
Tried to repair using PC companion, but was able to connect only in flash mode, unable to proceed software update..
I previously tried flashing stock GB using flashtool thrice. Still couldn't switch on the phone.. What else may i try..
Thanks friends..
Click to expand...
Click to collapse
try flashing kernel other than spikelabs (e.g. feravolt,doom,achotjan,zkernel..etc.)
sanababitz said:
try flashing kernel other than spikelabs (e.g. feravolt,doom,achotjan,zkernel..etc.)
Click to expand...
Click to collapse
Tried Ferakernel, Stock GB kernel, etc bro.. No luck..
Flashed Stock GB firmware more than 3 times still no luck :crying:
SEUS not working _ couldn't connect to network..
SUS does not have x10 enlisted
Went to 3 service shops at - Ritchie street, Chennai. They simply said harware issue (Short in board) and gave back the phone.
Now given at a better service centre. Will get back on monday it seems. Will update the status friends..
Thanks..
Here also they said the same reason friends.. Short in board..
Is there any way i could recover the phone???
UPDATE: Nothing worked, finally went to service center and they changed motherboard , it took 8 days but my ray is back #THANKUWARRANTY
This thread is not a question thread, i am posting here to warn all xperia ray users.
My Story:
Yesterday i installed ICS Pureness rom but i didnt used sirkay kernel with that instead i used .431 stock kernel (I think here is the problem).
After that i used it 20-30 mins and went back to stock .62 GB using flashtool.
I got news that stable CM9 is available, so i installed latest stable Cyanogenmod9 (cm-9.0.0-urushi.zip downloaded from official CM site), used it 5-10 mins
I dont like it either so i returned to GB .62 using cwm backup made before installing CM. Everything worked fine but my phone was not charging , just showing that its charging.
That time battery percentage was 12% it was constantly decreasing although phone was showing its charging. After few mins it turned off and i tried to turn on but phone didnt started , red led blinked 3 times and went off.
I tried another battery and phone works fine but battery still not charging. (it is showing charging but battery percentages are decreasing)
I Also charged my old battery with other phone and tried still no luck phone is unable to charge battery.
I flashed .62 firmware again , still no luck
Left my phone in charging around 5+ hours, still not charging.
Since my phone is unable to charge battery , i am charging it using a direct battery charger, by 15 mins of charging it gives me 10-12% battery. (this is only way to boot my phone and test repairing methods)
UPDATE: Tried method by emosis , Flashed stock .431 using flashtool then flashed sirkay's XRay V7.3.431 kernel but still no luck
These guys are facing same problem too.
1. http://forum.xda-developers.com/showthread.php?t=1808552
2. http://forum.xda-developers.com/showthread.php?t=1831935
Note: I think its software problem but i dont know how to fix it. Basically i am stuck.
So ray users you have been warned , dont try stable CM9.0 over .62 GB firmware otherwise you will lose your phone.
Dont forget to share to aware users, its a very big problem and If you have any suggestion please reply (#seriously so we can make this thread helpful)
If there is really no way To fix it, then maybe get one of these?http://pages.ebay.com/link/?nav=item.view&id=320777472336 I got one and love it. Comes in handy.
Sent from my PARANOID ANDROID
xperia ray said:
Note: I am 1000% sure its software problem but i dont know how to fix it , f**k you sony and Cyanogenmod team.
Click to expand...
Click to collapse
Bravo for the beautiful language. Punks like u dont deserve any help whatsoever.
Bro
Try to do what i say..
Use a charged battery..
Put out battery 1 minute.. Then turn on phone and get fastboot screen and flash sirkay latest kernel 2 times..when flash finished turn off phone and again put out battery 1 minutes turn on phone and get recovery screen - fastboot screen - flash sirkay kernel again.. then turn off phone disconnect phone from computer and connect it to charger after see charging screen turn on ur phone normally and say us the result
Are you talking about this kernel ?? = http://forum.xda-developers.com/showpost.php?p=29739291&postcount=1962
For your information= My phone is currently on GB .62 stock (i charged my phone battery separately without phone >> reinserted battery >> flash .62 stock using flashtool)
EDIT: Tried sirkay kernel not working.
When things go totally out of hand, I usually reinstall the stock ROM with Sony Ericsson Update Service with "software update+factory reset: option. In 99.5% cases it works.
(Well it might not be helpful if it SEUS does not recognize phones with unlocked bootloader.)
Its ok do it with sirkay latest kernel and install pureness you used before bro.. factory reset wipe data and dalvik cache..
Sent from my ST18i using xda app-developers app
tintin100 said:
When things go totally out of hand, I usually reinstall the stock ROM with Sony Ericsson Update Service with "software update+factory reset: option. In 99.5% cases it works.
(Well it might not be helpful if it SEUS does not recognize phones with unlocked bootloader.)
Click to expand...
Click to collapse
Problem is beyond that, i installed stock rom using flashtool but not working.
emosis said:
Its ok do it with sirkay latest kernel and install pureness you used before bro.. factory reset wipe data and dalvik cache..
Sent from my ST18i using xda app-developers app
Click to expand...
Click to collapse
Thanks a lot for your reply, i am downloading pureness again , actually deleted it.
If you can also explain why you are saying to use pureness rom ?? any technical reason behind it ??
No i said that cuz i thought u have it.. but do this :ut out battery 1 minute then recovery menu and fastboot mode use fastboot mode for flashin the kernel 2 times and put out battery again 1 minute then turn on recovery screen factory reset and wipe dalvik cache and install the rom and restart phone and say result i did this to solve mine and it worked ( dont reset battery stats)
Sent from my ST18i using xda app-developers app
@emosis bro , i am booting to fastboot like we normally do (switch off phone>>hold volume up and connect to pc)
is there any different method too, as you are saying - "recovery menu and fastboot mode"
I also tried , booted in recovery then selected reboot in fastboot mode but phone started normally.
Thanks a lot.
Note: I am not a noob, in fact a developer kinda geek, but this problem made me sick and tired , i surrendered. seems like hardware problem.
If possible please tell me what happened with your phone, did you faced exact problem like i did ?
In sirkay kernel reboot in fastbootmode or while using phone settings application develop usb debugging on..and use flashtool reboot in fastboot mode phone led must be blue.. if it s ok flash the kernel 2 times and do what i said bro.
Sent from my ST18i using xda app-developers app
flash .72 baseband and reflash xkernel v7.3.431 again
sirkay said:
flash .72 baseband and reflash xkernel v7.3.431 again
Click to expand...
Click to collapse
i flashed .431 so it have .72 baseband already. Should i flash xkernel v7.3.431 once more ?
yes, then go into recovery
- wipe data / factory reset
- wipe dalvik-cache
- wipe battery stats
- flash rom
- boot into rom
Strange, I had no problems when going back to .62 from CM9 stable...
I've heard that you can wipe EVERYTHING from the phone memory, leaving only basic programs and protocols like flashmode and fastboot by taking the battery out and charging the phone without for some time. Maybe it should help, though I never used this method and I don't know if it's safe or will it ever work...
I had battery %0 problem before can't charge phone.. i had it cuz battery stats was so low i flashed a kernel and used clear battery stats and installed a new rom.. ...... tried many thing to solve so i solved this problem the way i explained..hope you can solve it too..
Sent from my ST18i using xda app-developers app
emosis said:
I had battery %0 problem before can't charge phone.. i had it cuz battery stats was so low i flashed a kernel and used clear battery stats and installed a new rom.. ...... tried many thing to solve so i solved this problem the way i explained..hope you can solve it too..
Sent from my ST18i using xda app-developers app
Click to expand...
Click to collapse
my phone is not showing 0% all the time, it shows 10-11% battery and when i connect it, instead of charging it start to discharge.
Since my phone is unable to charge battery , i am charging it using a direct battery charger, by 15 mins of charging it gives me 10-12% battery. (this is only way to boot my phone and test repairing methods)
So could you try the way i said?
Sent from my ST18i using xda app-developers app
sirkay said:
yes, then go into recovery
- wipe data / factory reset
- wipe dalvik-cache
- wipe battery stats
- flash rom
- boot into rom
Click to expand...
Click to collapse
tried but not working, i think its hardware problem in phone. (Except charging battery everything is working fine)
Battery is working (i charge it using external charger)
Hi there. First of all, sorry about my english, but i'm spanish
I was reading a lot, and i cant find a solution to my phone. It sudently becomes a brick just when charging (with anothers phone charger) and the battery was lower than 10%
It doesn't work, and don't response to any of all solutions i've read (Take out SIM, SD card, remove battery and wait... ) no way... Screen never come back to iluminate again. Just, when pushing power buttom, the phone's vibrates.
So tired of the brick, i've arrived at this page. And I read this post:
http://forum.xda-developers.com/showthread.php?t=1568792
And try to become my phone back...
At least, the phone enter in flashmode, and i can flash with flashtools... but the phone never come back... just the brick
I tryed to flash with the Xperia_2011_FreeXperia_ALL.ftf file and OK
Afther that, take out the USB and flash again with one ROM i get from here:
Xperia Mini Pro (SK17i)
4.0.2.A.0.42 - http://www.mediafire.com/?hevz3x5w9pqt24q
4.1.B.0.431 - http://www.mediafire.com/?j0bdx06zz5skvzt
But the phone never works. One time afther flashing with 4.0.2.A.0.42 i noticed, that trying to power on the phone, the red led shyne 3 times, and thats supposed to be the battery. But i don't know if the battery now is charged. I've left it hours charging, and hours too to the USB...
Supposedly, i cant flash without battery in the phone, but flashtools finish correctly
So... any idea?
There is something i can do?
Thank all of you who read this!
Its probably battery empty. recharge battery or get a friends and try
Sent from my X8 using Tapatalk 2
First make sure that your battery is really fine. Try another one.
If that fails, see if you can get your device into flash mode?(Switched off+Vol Down + USB cable)
If yes, try flashing a custom ROM. For example, download CyanogenMod from here, use Flashtool (guide) to flash the kernel provided in the downloaded ROM's ZIP file. Then, boot again into Clockword Mod Recovery(Keep pressing Vol DOwn button while boot or google for how to enter recovery for your phone). Copy the downloaded Cyanogenmod ZIP to SD card and install it via ClockwordMod recovery.
See if the above works.
bandarigoda123 said:
Its probably battery empty. recharge battery or get a friends and try
Sent from my X8 using Tapatalk 2
Click to expand...
Click to collapse
But, if it was problem of battery, i suppose, that i can't finish flashing with flashtoolts. Not?
Milven said:
But, if it was problem of battery, i suppose, that i can't finish flashing with flashtoolts. Not?
Click to expand...
Click to collapse
Try booting up your phone with the USB connector plugged in the PC (maybe it will charge the battery then)
Milven said:
But, if it was problem of battery, i suppose, that i can't finish flashing with flashtoolts. Not?
Click to expand...
Click to collapse
At least my phone (LWW WT19i does not work without the battery with Flashtool. I'm not sure about your device.
Anyway try flashing a custom ROM like I said. Try unlocking bootloader first though from here
U said that red light show when try to on the phone.
Just try another battery.. It should work
Sent from my X8 using Tapatalk 2
You said LED blinks 3 times so if the color of LED is RED then it indicates empty battery..
Hey, my problem wasnt the same as yours, but it helped for me when i got only service logo on screen.
On this link you find a "Play_v1.01_TA brick fix UPDATE" zip.
Download, unpack and flash it.
http://forum.xda-developers.com/showthread.php?t=1126358&page=10
I hope it will help u.
Milven said:
Hi there. First of all, sorry about my english, but i'm spanish
I was reading a lot, and i cant find a solution to my phone. It sudently becomes a brick just when charging (with anothers phone charger) and the battery was lower than 10%
It doesn't work, and don't response to any of all solutions i've read (Take out SIM, SD card, remove battery and wait... ) no way... Screen never come back to iluminate again. Just, when pushing power buttom, the phone's vibrates.
So tired of the brick, i've arrived at this page. And I read this post:
http://forum.xda-developers.com/showthread.php?t=1568792
And try to become my phone back...
At least, the phone enter in flashmode, and i can flash with flashtools... but the phone never come back... just the brick
I tryed to flash with the Xperia_2011_FreeXperia_ALL.ftf file and OK
Afther that, take out the USB and flash again with one ROM i get from here:
Xperia Mini Pro (SK17i)
4.0.2.A.0.42 - http://www.mediafire.com/?hevz3x5w9pqt24q
4.1.B.0.431 - http://www.mediafire.com/?j0bdx06zz5skvzt
But the phone never works. One time afther flashing with 4.0.2.A.0.42 i noticed, that trying to power on the phone, the red led shyne 3 times, and thats supposed to be the battery. But i don't know if the battery now is charged. I've left it hours charging, and hours too to the USB...
Supposedly, i cant flash without battery in the phone, but flashtools finish correctly
So... any idea?
There is something i can do?
Thank all of you who read this!
Click to expand...
Click to collapse
Hi Milven,
I got the same problem with you yesterday. Few hours sitting in front of my PC and hopeless.
I tried everything same as yours, finally I found and solve the case.
Install this http://www.sonymobile.com/global-en/tools/update-service/
And let it update your phone.
Done. It's back to brand new.
Hope you read this.
frdnoer said:
Hi Milven,
I got the same problem with you yesterday. Few hours sitting in front of my PC and hopeless.
I tried everything same as yours, finally I found and solve the case.
Install this http://www.sonymobile.com/global-en/tools/update-service/
And let it update your phone.
Done. It's back to brand new.
Hope you read this.
Click to expand...
Click to collapse
That's true. Try fixing it by using sony repairment. I did it and it worked for my phone. I hope it does for you
Sent from my Xperia, Asri Aisyah El Zahra
i've the same problem as you. charge your battery with desktop charger. not too long, i put the battery and flash firmware in flashtool. and it work. when the flashing done and the device on, my battery just 3% lol. flashing with flashtool only takes a few minutes
My Xperia 1 is now stuck at boot screen. Specifically, it is stuck at XPERIA animation after the initial SONY banner.
I didn't do any damage to my phone. It just happened that battery drained overnight, and after recharge next day it just doesn't boot.
I would like to do a factory reset, but looks like I couldn't. Both Xpedia Companion & flashtool claimed the phone it locked. I didn't unlock bootloader nor I could get into phone's settings to change the situation...
Is there anything I can do to boot it up or do factory reset?
microdou said:
My Xperia 1 is now stuck at boot screen. Specifically, it is stuck at XPERIA animation after the initial SONY banner.
I didn't do any damage to my phone. It just happened that battery drained overnight, and after recharge next day it just doesn't boot.
I would like to do a factory reset, but looks like I couldn't. Both Xpedia Companion & flashtool claimed the phone it locked. I didn't unlock bootloader nor I could get into phone's settings to change the situation...
Is there anything I can do to boot it up or do factory reset?
Click to expand...
Click to collapse
Hey, bit late answer, but I had same issue around start of March. Same symptoms, I let the battery drain out and it didn't no longer boot.
I took it to my phone provider asap, cause it isn't the first time my Xperia 1 has acted up.
The provider fixed under warranty and I assume they changed out the motherboard, cause I have new IMEI. Needless to say I lost all my internal data.
You guys should have the phone switched off and used Xperia Companion.
Clicking Repair software option without connecting the phone.
It asks to connect the phone with volume - pressed and warns you for the total data erase.
That would have been easy, anyways you already have it working.
jeoleo7 said:
You guys should have the phone switched off and used Xperia Companion.
Clicking Repair software option without connecting the phone.
It asks to connect the phone with volume - pressed and warns you for the total data erase.
That would have been easy, anyways you already have it working.
Click to expand...
Click to collapse
i have same problem and tried your sugestion using xperia companion but it say something went wrong, is there any other solution?
annasschecter said:
i have same problem and tried your sugestion using xperia companion but it say something went wrong, is there any other solution?
Click to expand...
Click to collapse
Please charge your phone first.
It usually works if your phone is at least 80 % charged. Else shows similar errors.
jeoleo7 said:
Please charge your phone first.
It usually works if your phone is at least 80 % charged. Else shows similar error
Click to expand...
Click to collapse
Thank's for your reply but my x1 is fixed now, i tried to flah it with many different rom and build but always bootloop but when i flash it with Android 10 Build 55.1.A.0.748 it works but my nfc not work
You need to upgrade to Android 11.
I have same problem and also had posted a question in xda.
Why NFC works only in Android 11?
I downgraded to android 9 and noticed that it isn't working. I have downgraded multiple times but it used to work. If I update my phone to android 11 latest then it works again but I don't want to upgrade to 11. what might be the issue? How do...
forum.xda-developers.com