Hi guyz im new 2 xda
I have a serius prob actualy i have karbonn a1(clone of zte n721and also have same hardware and software of huawei pulse mini and huawei u8150) problem is that my device is stucked on boot logo and nothing is working like i tried to go into recovery mode and also in bootloader mode but no luck. also tried from pc with adb and fastboot but it also not worked (whenever i connect my phone to pc it automaticaly detected as adb interface)i also installed usb drivers correctly n still no luck
This happend when i tried to flash recovery n boot image via terminal emulater... when it giving me out of space error i rebooted my cell n this happend.... plz plz plz help me guyz
what exactly did u do ???u tried to flash cwm ?
No i mean i already succesfuly flashed cwm but still i could not go into recovery mode so i thought flashing custom recovery and boot image can solve this problem n then i tried to flash these 2 images via terminal emulater but then i got out of space error while flashing so i rebooted my cell n stucked on boot logo
did u try flashing othr custom rom ?
How can i flash other rom even i cant go into recovery mode
Device : - karbonn A7* (MTK 6577)
As i seen articles of flashing and installing rom i started to follow step by step but when i started there started a problem
camera,filemanager,games,video(used other player but there was no success),music player all these stop working and i came with the conclusion with "Sp-tool" and downloaded rom and selected scatter file but there was no Dsp_bl file so i uncheck that file and select recovery as cwn . when i clicked on download the message came it can cause boot up issue and i neglect to it and started flash and when progress reach 17% i got an error and my phone was not responding
Tried to flash in recovery mode not succeded
what can i do now to unbrick or to flash an new stock rom
and there is no response of phone when connected to pc
wont start up
plz help
well, i was clean installing Xperia STE CM 11 pepper ROM. I was already using the same earlier , but wanted to do a fresh install
Anyways, i entered TWRP, and Advanced WIPE everything , including sd-card, Android Secure , data, system , cache & alll .
well , then i thought after rebooting i would just flash the ROM. ZIP as usual, but my phone is now stuch at SONY logo, and i am unable to enter TWRP.
So i tried to fastboot boot.img , and it was successful , but still when i try to flash directly the ROM.zip , using
fastboot flash zip <rom.zip>
it sends , but then returns with an error
FAILURE <remote : Partition not found>
then i tried to use this recovery http://forum.xda-developers.com/xperia-u/sola-development/recovery-twrp-2-7-0-0-touch-recovery-t2683495
this returns me with error " daemon not running, starting it now on port 5037"
I also cant use ADB properly , my device isn't listed when i command adb devices
error : device not found.
( however lter on while doing the same via Flashtool , it does clarifies the reason that USB Debugging is turned off..so maybe that's why ADB is not working)
My laptop has win 7 , i double checked that i have all the necessary ADB and device specific usb drivers, and Under DEVICE MAnager Tab ,
so please tell me how to solve this...Android ADB Composote device is listed working properly.
So after that , i flashed this Kernel via fastboot Out Of desparation http://forum.xda-developers.com/xperia-u/sola-development/kernel-t2075093 [Sola] [CWM Touch] [6.1.1.B.1.54] [Unlocked Bootloader
and it worked , i mean i was able to enter CWM and navigate properly there, but i dont want to run stock firmware ICS again.
(also there i Explored my Internal SD Card , and it's completely empty)
So then i again flashed the boot.img from http://forum.xda-developers.com/xperia-u/sola-development/rom-cyanogenmod-11-t2743059 [ROM] [UB] [XperiaSTE] CyanogenMod 11
And well , the result is yet the same, my phone boots up and stays at SONY Logo, no LEDs flashing changing colors as it did earlier, and i cant enter TWRP , Neither can't i flash cm.11.0-12-pepper.zip via fastboot, it returns with error regarding messed up partitions.
also , i tried to explore/open Decompile the provided "boot.img" with PowerISo , ImgBurn , etc. and each says that the file is either damaged or corrupted.
MAYBE , that's the reason why me & many others aren't able to boot into recovery, there is something wrong with the boot.img of this rom , however i will try flashing Other ROM's Boot.img tomorrow.
I urge the developers to please look into that as you are our only saviors.
So my Questions now are
1. what should i do get a working CM 11 kk ROM for my device ?
2. Is my device Bricked ( because i am doubtful on that one, as i can connect it in fastboot as well as flashmode) ?
3. How to Create/repair the partitions , that CMD says are euther damaged or not found ?
4.Will flashing my stock firmware 6.1....54 , via FLashtool , solve all this & by solving i mean getting CM11 to work again . ?
PLease someone do reply , as i live in a remote town and i am all on my own completely. ThankS.
Try to use Xperia Sola AOSX ROM boot.img, then install cm11.
Try new version
My Lenovo phone S930..I tried to flash MysticOS Ver3.0 custom rom using CWM..The Recovery Said That I Succesfully installed/flased the rom..then i reboot the system .. It Just Keep Showing The Lenovo logo then go back to the cwm recovery back..and have a error
Can't open E/cache/recovery/log
Can't open E/cache/recovery/log
Can't open E/cache/recovery/last_log
Can't open E/cache/recovery/last_log
So i tried to find at google for the solution to fix this problem..but everything showed that i have to flash stock rom..i tried to use sp flash tool to flash stock..but my phone is not detect on my computer..but i already installed the driver but still doesn't work..so my phone just stuck at recovery .. Nothing i can do..
any solution for this?? :crying:
Once I flashed EMUI 3.0 KK I downloaded and transferred cm12.1 + gapps (for h30-u10 model) into SD card and flashed using ROM installer (TWRP recovery) :fingers-crossed: ....
when the process was over I rebooted into system but I got NOTHING! no boot img no vibrations no response at all..
I tried SP flash tool for a new ROM (I followed the right steps) and when connecting my phone without the battery, there was no response, laptop did not recognise the device, nor did any other laptop (tho I have installed the required USB drivers)
Its been over 30 hours and my phone gives nothing ( brick )
WHAT CAN I DO??
plz help
thanks in advance :good: