I have been having Wifi connectivity issues for some time. Basically, I can use wifi about 4 times before it just stops working.
I get the message "Error" in the settings. The message was "Unable to start Wifi" in Android 2.1.
I've tried SEUS, I'm tried resets, wipes, re-installs, and nothing. I'm not an expert when it comes to seriously technical phone settings but here's some info. I think that maybe my settings are corrupted. From the service menu:
Wifi State: Unknown
Network State: Unknown
Supplicant: Uninitialized
RSSI:-200
Hidden SSID: False
IPaddr: 0.0.0.0
MAC addr: (Blank)
Network ID: -1
Link SPeed: -1 mbps
Scan Results: (blank)
After running ping test
PingIPAddr: Fail - not reachable
Ping Hostname: Fail
HTTP client: Fail: IOException
Also, when I try to go into "Wifi API" and hit "getConfiguredNetworks" nothing happens.
have u rooted ur phone or installed any custom Roms ??
No I haven't, its stock except that it is unlocked. Maybe rooting it will let me take control of things such as these?
Hi guys
anyone can change mac of s5830I?
I try apps and busybox command but I cant.
can you help me
TNX
my English is bad
danial199 said:
Hi guys
anyone can change mac of s5830I?
I try apps and busybox command but I cant.
can you help me
Click to expand...
Click to collapse
The MAC address is hard-coded on your network interface controller (NIC) and cannot be changed permanently with simple command line from your terminal nor in software level approach. However we can assign a temporary solution for your MAC, which will be reverted back to it's original state after Reboot/Power off .
Requirements :
- Rooted phone
- Busy box app from play store installed
- Terminal emulator from play store :
Know normally your card's interface should be eth0 ( older devices ) or in case of newer phones ( wlan0)
after granting super user permission in terminal ( Su) , type >> netcfg
Code:
busybox iplink show eth0
you may change it to wlan0 , if you are on this interface
Code:
busybox ifconfig eth0 hw ether XX:XX:XX:XX:XX:XX
change the XX to your preference value ( i,e : 00:11:22:33:44:55)
Because of kernel design and absence of monitoring mode support for mac spoofing , this method won't work on protected networks ( ONLY open networks )
and if the lines above don't work for you , try to disable and enable your eth0:
Wifi is ON
su >
Code:
busybox ifconfig eth0 down
busybox ifconfig eth0 hw ether (address)
busybox ifconfig eth0 up
ehsanotaku said:
The MAC address is hard-coded on your network interface controller (NIC) and cannot be changed permanently with simple command line from your terminal nor in software level approach. However we can assign a temporary solution for your MAC, which will be reverted back to it's original state after Reboot/Power off .
Requirements :
- Rooted phone
- Busy box app from play store installed
- Terminal emulator from play store :
Know normally your card's interface should be eth0 ( older devices ) or in case of newer phones ( wlan0)
after granting super user permission in terminal ( Su) , type >> netcfg
Code:
busybox iplink show eth0
you may change it to wlan0 , if you are on this interface
Code:
busybox ifconfig eth0 hw ether XX:XX:XX:XX:XX:XX
change the XX to your preference value ( i,e : 00:11:22:33:44:55)
Because of kernel design and absence of monitoring mode support for mac spoofing , this method won't work on protected networks ( ONLY open networks )
and if the lines above don't work for you , try to disable and enable your eth0:
Wifi is ON
su >
Code:
busybox ifconfig eth0 down
busybox ifconfig eth0 hw ether (address)
busybox ifconfig eth0 up
Click to expand...
Click to collapse
Tnx for answer
after change mac I cant connect to wifi
want a new password but pass is true
danial199 said:
Tnx for answer
after change mac I cant connect to wifi
want a new password but pass is true
Click to expand...
Click to collapse
You are trying to access protected network , which comes with encryption ( WEP/WPA/WPA2 etc etc ) ? What error you are getting from Android OS ? Are you absolutely certain your MAC address is white listed inside the router/modem settings on open network protocol settings of course ?
ehsanotaku said:
You are trying to access protected network , which comes with encryption ( WEP/WPA/WPA2 etc etc ) ? What error you are getting from Android OS ? Are you absolutely certain your MAC address is white listed inside the router/modem settings on open network protocol settings of course ?
Click to expand...
Click to collapse
wpa2
when i connect to network want a password but the password is true
There isnt any listed mac address inside the router
danial199 said:
wpa2
when i connect to network want a password but the password is true
There isnt any listed mac address inside the router
Click to expand...
Click to collapse
Already explained about protected networks and the reason behind it in the first post . You need to set it to 'Open network' ( means no wpa/wpa2/wep etc,,etc) inside the router/modem you are seeking an access.
Maybe not so
I have tried several apps and every possible command in terminal (as root) and although all can successfully change the MAC address, the device is always unable to connect to an access point thereafter. This is a known issue, but unresolved and too frequently denied. I half suspect their are some "political" purposes for withholding the resolution; many have inquired about this, yet only receive pedantic or useless replies. I wonder if there is any correlation to the wifi chipset, or if it's a built-in Android limitation. I know my chipset is very difficult to identify ('demesg | grep wlan0' yields nothing familiar) and that it also seems incapable of monitor mode.
I have scoured many forums for the solution to this and found only a suggestion to change certain files, all which appear to vary between devices, etc.
What I'd like at this point, is and explanation if not a solution. Anyway, I think the OP may have been misunderstood, ergo my 'two cents'.
Q&A for [GUIDE] Huawei usb 3g modem on android x86 4.4.2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GUIDE] Huawei usb 3g modem on android x86 4.4.2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
please teach me
lemonsqueeze said:
Finally found a way to get this usb 3g modem to work with android x86. Looks like there are significant differences in android kitkat, the other tutorials didn't work for me. Here's what i did in case somebody else finds it useful:
Model: Huawei E1752 HSPA USB Stick
Android x86 4.4.2 on Acer Netbook
Get modem to work under Ubuntu first so you have chat scripts that are known to work with your modem/provider. (If having trouble finding the right AT commands to initialize your modem you can record them under windows. Try free serial port monitor)
Install PPP Widget. It doesn't work, but that gives us usb_modeswitch and pppd to play with.
Install busybox if you don't have it already. Your device should be rooted.
I disabled modem's cdrom mode so that i wouldn't have to modeswitch it with PPP Widget every time (did it from linux)
http://ma.juii.net/blog/disable-usb-mode-switching
Tweak and install pppd/chat scripts for your provider:
/sdcard/pppwidget/ppp/free-chat
Chat script to initiate connection. Change AT commands and dial number (*99#) if yours differ.
Code:
ABORT BUSY
ABORT 'NO CARRIER'
ABORT 'NO ANSWER'
ABORT DELAYED
REPORT CONNECT
TIMEOUT 2
"" AT
OK-AT-OK AT&FE0V1X1&D2&C1S0=0
OK-AT-OK AT
OK-AT-OK ATS0=0
OK-AT-OK AT
OK-AT-OK AT&FE0V1X1&D2&C1S0=0
OK-AT-OK AT
OK ATDT*99#
TIMEOUT 30
CONNECT ''
SAY '\rReport from chat:\r'
/sdcard/pppwidget/ppp/peers/free
pppd config file
Code:
#/etc/ppp/peers/free
# Usage: root>pppd call free
ttyUSB0
3600000
crtscts
connect '/data/data/de.draisberghof.pppwidget/app_bin/chat -v -f /sdcard/pppwidget/ppp/free-chat'
noauth
defaultroute
usehostname
user fooooooo
noipdefault
usepeerdns
idle 0
/sdcard/3gmodem/connect
script to start connection
Code:
#!/system/bin/sh
pppd call free
# use own DNS (OpenDNS)
ndc resolver setifdns ppp0 208.67.222.222 208.67.222.220
ndc resolver setdefaultif ppp0
To connect, open a terminal and type:
Code:
$ su
# cd /sdcard/3gmodem
# ./connect
Now you're connected. browser should work now.
Connection is there but android doesn't know about it, so apps like play store which check connectivity will think you're offline. Install Fake Wifi Connection to deal with those.
Done !
Click to expand...
Click to collapse
how to setting modem on android x86 kitkat-r2
my modem is prolink phs101 3g modem
my firs os windows 7
please teach me how to connet modem
sorry for my bad english
I'm sorry the original problem is closed
New problem is aireplay - ng can't injection
The successful use of bcmon into monitor mode.
But using AircrackGUI
Deauth attacks are:
wlan0 is on channel -1 , but the AP chanenl 1
wlan0 is on channel -1 , but the AP chanenl 6
'-1' ？
Who can tell me what reason, how to solve?
I use a AircrackGUI: 1.2.1
1.30 the new version can't search to the signal
The problem is that it works on fixed - 1 channel
Request to give me a solution
The successful use of bcmon into monitor mode.
But using AircrackGUI
Deauth attacks are:
wlan0 is on channel -1 , but the uses AP chanenl 1
waiting for beacon frame (BSSID: XX:XX:XX:XX:XX:XX) on channel -1
wlan0 is on channel -1,but the AP uses channel 1
"-1" ？
Asked what it fixed in "negative - one" channel ?
Use terminal command is the same result
Who can tell me what reason, how to solve?
I use a AircrackGUI: 1.2.1
Version 1.30 into listening mode can't search to the signal
I'm sorry, the attachment above have failed