Hello all, as I can install drivers for fastboot on my machine, I tried everything and still can not admit it, the team also stays in the black screen, just turn on the LED in blue, my machine has Windows 10, has something to seeing that, I would appreciate your help, really.
1- Download and install the latest Flashtool driver for Xperia Z2 from here: http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4
2- Download and install Minimal ADB and Fastboot Setup v1.4 from this link: https://mega.nz/#!7942XJjI!9gurv7k3PVVFT8VViDbkg_sUiRTiDPeArhwjXsG XB9c
3- Download Xperia_Z2_driver.zip from this link: http://dl-developer.sonymobile.com/drivers/Xperia_Z2_driver.zip
4- Extract Xperia_Z2_driver.zip
5- Connect your Xperia Z2 with Computer by USB in (fastboot mode)
6- Press right click on My Computer icon then click on Properties.
7- In the new window that will open on the upper left side press on Device Manager.
8- Search in Device Manager window for Protable Devices, when you find it just press on (+) beside it.. when you extend it you will see Unknown device or your Xperia Z2 or some thing like that.
9- Right click on it and press on Update Driver Software.
10- In the new window select (Browser my computer for driver software) then click on Browse.. and choose the extracted folder from Xperia_Z2_driver.zip you have downloaded in Step 1,,, be sure that Include subfolders is checked then press next.
11- Done it must be installed and your phone must be regonized and work successfully in the fastboot mode.
Note <<<<<<<>>>>>>>> the most important thing in (Step 5) that when you start to install the fastboot driver for your phone you must put your phone in the fastboot mode don't forget that.
If there is anything not work with you or you need more description in it just tell me and i will help you.
I hope that i have helped you.
Reboot to windows 10 using advanced startup with disable driver signature. Then install whatever drivers u want to install. And also install flashtool driver from there. Happy flashing :good:
rakeshbro said:
Reboot to windows 10 using advanced startup with disable driver signature. Then install whatever drivers u want to install. And also install flashtool driver from there. Happy flashing :good:
Click to expand...
Click to collapse
Mostafa Sherif said:
1- Download and install the latest Flashtool driver for Xperia Z2 from here: http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4
2- Download and install Minimal ADB and Fastboot Setup v1.4 from this link: https://mega.nz/#!7942XJjI!9gurv7k3PVVFT8VViDbkg_sUiRTiDPeArhwjXsG XB9c
3- Download Xperia_Z2_driver.zip from this link: http://dl-developer.sonymobile.com/drivers/Xperia_Z2_driver.zip
4- Extract Xperia_Z2_driver.zip
5- Connect your Xperia Z2 with Computer by USB in (fastboot mode)
6- Press right click on My Computer icon then click on Properties.
7- In the new window that will open on the upper left side press on Device Manager.
8- Search in Device Manager window for Protable Devices, when you find it just press on (+) beside it.. when you extend it you will see Unknown device or your Xperia Z2 or some thing like that.
9- Right click on it and press on Update Driver Software.
10- In the new window select (Browser my computer for driver software) then click on Browse.. and choose the extracted folder from Xperia_Z2_driver.zip you have downloaded in Step 1,,, be sure that Include subfolders is checked then press next.
11- Done it must be installed and your phone must be regonized and work successfully in the fastboot mode.
Note <<<<<<<>>>>>>>> the most important thing in (Step 5) that when you start to install the fastboot driver for your phone you must put your phone in the fastboot mode don't forget that.
If there is anything not work with you or you need more description in it just tell me and i will help you.
I hope that i have helped you.
Click to expand...
Click to collapse
Hi thanks for the guide and files and have installed the drivers, dual recovery've roteado, and install the first room, no problems, but now wanting to install one based 6.0.1 stayed in a loop, as I can enter recovery mode, or as I can flash the stock, because in flashtool not recognize me the phone, trying to select the room to flash me nothing appears, or where I can download the roms stock? please help
ermite666 said:
Hi thanks for the guide and files and have installed the drivers, dual recovery've roteado, and install the first room, no problems, but now wanting to install one based 6.0.1 stayed in a loop, as I can enter recovery mode, or as I can flash the stock, because in flashtool not recognize me the phone, trying to select the room to flash me nothing appears, or where I can download the roms stock? please help
Click to expand...
Click to collapse
If you install Marshmallow Rom and it just stayed in a loop so you have to flash the bootloop fix for Marshmallow 6.0.1 that will fix this problem and the rom will boot successfuly :
1- Flash Marshmallow rom you want through the recovery.
2- Download this bootloop fix from this link: https://mega.nz/#!AJcwERiQ!FUmk6eS5aoVsFSZ1f4WZIELIt7sckPCj11n0AIdCNzU
3- Copy it to your phone or sd card then flash this bootloop fix through the recovery.
4- Reboot and the rom will boot successfully without any bootloop.
I wish that i had helped you.
If there is anything just ask me and i will answer you
Mostafa Sherif said:
If you install Marshmallow Rom and it just stayed in a loop so you have to flash the bootloop fix for Marshmallow 6.0.1 that will fix this problem and the rom will boot successfuly :
1- Flash Marshmallow rom you want through the recovery.
2- Download this bootloop fix from this link: https://mega.nz/#!AJcwERiQ!FUmk6eS5aoVsFSZ1f4WZIELIt7sckPCj11n0AIdCNzU
3- Copy it to your phone or sd card then flash this bootloop fix through the recovery.
4- Reboot and the rom will boot successfully without any bootloop.
I wish that i had helped you.
If there is anything just ask me and i will answer you
Click to expand...
Click to collapse
I'm searching a way to recover my forever-looping phone. I had the Android M, got the horribel ideia of using kingroot via PC and now the phone does not go to the OS. I've tried everything, I´m gonna try installing all drivers again (windows 10). Anyway, What can I do since I dont have recovery mode ?
Plus, when I try to flash a fresh rom, I get this;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I dunno whatelse to do. It's like the PC do not recognize the phone. The little brick just vibrates and loops.
---------- Post added at 03:55 PM ---------- Previous post was at 03:35 PM ----------
YEAH. I managed to reboot system via flashtool. MIRACLE.
Rickpg said:
I'm searching a way to recover my forever-looping phone. I had the Android M, got the horribel ideia of using kingroot via PC and now the phone does not go to the OS. I've tried everything, I´m gonna try installing all drivers again (windows 10). Anyway, What can I do since I dont have recovery mode ?
Plus, when I try to flash a fresh rom, I get this;
I dunno whatelse to do. It's like the PC do not recognize the phone. The little brick just vibrates and loops.
---------- Post added at 03:55 PM ---------- Previous post was at 03:35 PM ----------
YEAH. I managed to reboot system via flashtool. MIRACLE.
Click to expand...
Click to collapse
Ok bro. just come down we can solve it by two ways:
The first one by unlocking your bootloader then install recovery then flash a new rom through recovery.
The second way is to keep the bootloader locked and recover your phone by using flashtool and any ftf for xperia z2
So which way from the two ways you want to solve your phone by it?
Mostafa Sherif said:
Ok bro. just come down we can solve it by two ways:
The first one by unlocking your bootloader then install recovery then flash a new rom through recovery.
The second way is to keep the bootloader locked and recover your phone by using flashtool and any ftf for xperia z2
So which way from the two ways you want to solve your phone by it?
Click to expand...
Click to collapse
I guess the bootloader is unlocked, so I would like to flash the recovery. Is there a way to do it via Flashtool?
The phone now iwont even loop. It's stucked in the SONY logo. -_-
Hi thanks, I found the way, now what I need is how to root, I've tried with dual recovery, but send me error, and what I managed to do it is with kingroot, then with dual recovery and only then is installed or I have done something wrong? thanks again
Rickpg said:
I guess the bootloader is unlocked, so I would like to flash the recovery. Is there a way to do it via Flashtool?
The phone now iwont even loop. It's stucked in the SONY logo. -_-
Click to expand...
Click to collapse
If the bootloader unlocked so you can easily flash recovery by using fastboot commands by using these steps:
1- download and install Minimal ADB and Fastboot from this link: https://mega.nz/#!7942XJjI!9gurv7k3PVVFT8VViDbkg_sUiRTiDPeArhwjXsG XB9c
2- Download and install Flashtool drivers from this link: http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4
Skip Step 2 if you already installed Flashtool Drivers that install with Flashtool if you have installed it.
3- Download the latest twrp recovery from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img.html
4- Move the twrp recovery that you have downloaded in step 3 to this Path C:\Program Files\Minimal ADB and Fastboot
5- put your phone in fastboot mode by this way >> (Power off your phone completely then wait for 10 second then press and hold the volume up then connect your phone to the computer with usb cable while you are pressing and holding the volume up then the led will change it's color to blue.. that is the fastboot mode)
6- Now go to the Minimal ADB and Fastboot folder in that path (C:\Program Files\Minimal ADB and Fastboot) Press shift button from keyboard then press right click form mouse while pressing the shift button you will find an option [Open command window here] Press it.
7- In the command window write this command exactly: fastboot flash recovery twrp-3.0.2-0-sirius.img
8- After it flashed successfully reboot your phone by writing this command: fastboot reboot then unplug the usb from the phone
9- when the phone reboot and the sony logo appear keep pressing the volume up and down until the twrp recovery opens
10- That is it.. you can from it wipe data, system, cache, dalivk cache and flash any rom you want
After you successfully flash a recovery just tell me and i will help you in flashing a new rom through the recovery
This way works only if you have bootloader unlocked
I wish i had helped you
---------- Post added at 06:04 PM ---------- Previous post was at 06:03 PM ----------
ermite666 said:
Hi thanks, I found the way, now what I need is how to root, I've tried with dual recovery, but send me error, and what I managed to do it is with kingroot, then with dual recovery and only then is installed or I have done something wrong? thanks again
Click to expand...
Click to collapse
Now you have a recovery right??
Mostafa Sherif said:
If the bootloader unlocked so you can easily flash recovery by using fastboot commands by using these steps:
1- download and install Minimal ADB and Fastboot from this link: https://mega.nz/#!7942XJjI!9gurv7k3PVVFT8VViDbkg_sUiRTiDPeArhwjXsG XB9c
2- Download and install Flashtool drivers from this link: http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4
Skip Step 2 if you already installed Flashtool Drivers that install with Flashtool if you have installed it.
3- Download the latest twrp recovery from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img.html
4- Move the twrp recovery that you have downloaded in step 3 to this Path C:\Program Files\Minimal ADB and Fastboot
5- put your phone in fastboot mode by this way >> (Power off your phone completely then wait for 10 second then press and hold the volume up then connect your phone to the computer with usb cable while you are pressing and holding the volume up then the led will change it's color to blue.. that is the fastboot mode)
6- Now go to the Minimal ADB and Fastboot folder in that path (C:\Program Files\Minimal ADB and Fastboot) Press shift button from keyboard then press right click form mouse while pressing the shift button you will find an option [Open command window here] Press it.
7- In the command window write this command exactly: fastboot flash recovery twrp-3.0.2-0-sirius.img
8- After it flashed successfully reboot your phone by writing this command: fastboot reboot then unplug the usb from the phone
9- when the phone reboot and the sony logo appear keep pressing the volume up and down until the twrp recovery opens
10- That is it.. you can from it wipe data, system, cache, dalivk cache and flash any rom you want
After you successfully flash a recovery just tell me and i will help you in flashing a new rom through the recovery
This way works only if you have bootloader unlocked
I wish i had helped you
---------- Post added at 06:04 PM ---------- Previous post was at 06:03 PM ----------
Now you have a recovery right??
Click to expand...
Click to collapse
The flashin recovery did work but the phone does not turn on now. The power button only vibrates but it's all turned off...
Since I´m dealing with my phone from early mornin I dunno if there is a lack of battery. I´m loosing contacts with clients today =(
Rickpg said:
The flashin recovery did work but the phone does not turn on now. The power button only vibrates but it's all turned off...
Since I´m dealing with my phone from early mornin I dunno if there is a lack of battery. I´m loosing contacts with clients today =(
Click to expand...
Click to collapse
Sony logo doesn't appear after pressing the power button and vibrate??
Try to make hard reset by press and hold volume up button and press and hold the power button too until the mobile vibrates 3 times then wait for 10 seconds and try to power on the phone again normally and tell me if the sony logo has
OR wait
I knew the solution and i will write it now
---------- Post added at 07:28 PM ---------- Previous post was at 07:16 PM ----------
Rickpg said:
The flashin recovery did work but the phone does not turn on now. The power button only vibrates but it's all turned off...
Since I´m dealing with my phone from early mornin I dunno if there is a lack of battery. I´m loosing contacts with clients today =(
Click to expand...
Click to collapse
The solution as following:
1- Make hard reset first as i descriped in the previous post to make sure that the phone powered off completely.
2- Download this kernel from this link: https://drive.google.com/file/d/0Bwn7bAJ-USZjZzg0Q2I2RWlWa1U/view?usp=sharing
3- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
4- As i descriped go to Minimal ADB and Fastboot folder and press shift then right click and select Open command window here
5- Put your phone in fastboot mode by press and hold volume up and connect it with usb cable
6- Write the following command: fastboot flash recovery twrp-3.0.2-0-sirius.img
7- Then write this command after it: fastboot flash boot boot.img
8- Now reboot your phone by writing: fastboot reboot then unplug the usb from phone
9- When the sony logo appear press the volume up and down until it go into the recovery
10- Done
When the recovery opens successfully tell me if you want and i will help you to flash a new rom from the recovery
Mostafa Sherif said:
Sony logo doesn't appear after pressing the power button and vibrate??
Try to make hard reset by press and hold volume up button and press and hold the power button too until the mobile vibrates 3 times then wait for 10 seconds and try to power on the phone again normally and tell me if the sony logo has
OR wait
I knew the solution and i will write it now
---------- Post added at 07:28 PM ---------- Previous post was at 07:16 PM ----------
The solution as following:
1- Make hard reset first as i descriped in the previous post to make sure that the phone powered off completely.
2- Download this kernel from this link: https://drive.google.com/file/d/0Bwn7bAJ-USZjZzg0Q2I2RWlWa1U/view?usp=sharing
3- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
4- As i descriped go to Minimal ADB and Fastboot folder and press shift then right click and select Open command window here
5- Put your phone in fastboot mode by press and hold volume up and connect it with usb cable
6- Write the following command: fastboot flash recovery twrp-3.0.2-0-sirius.img
7- Then write this command after it: fastboot flash boot boot.img
8- Now reboot your phone by writing: fastboot reboot then unplug the usb from phone
9- When the sony logo appear press the volume up and down until it go into the recovery
10- Done
When the recovery opens successfully tell me if you want and i will help you to flash a new rom from the recovery
Click to expand...
Click to collapse
You are amazing. *..*
Can I wipe everything and install vi recovery the "D6503_Customized US_1281-9709_23.5.A.0.575_R3D flashable-prerooted-signed" ?
Rickpg said:
You are amazing. *..*
Can I wipe everything and install vi recovery the "D6503_Customized US_1281-9709_23.5.A.0.575_R3D flashable-prerooted-signed" ?
Click to expand...
Click to collapse
Yup you can
1- Make factory reset
2- Wipe > Data, Cache, System and Dalivk/ART cache
3- Download and flash D6503_Customized US_1281-9709_23.5.A.0.575_R3D flashable-prerooted-signed from this link: https://drive.google.com/open?id=0B-xW4tRK0miyc1RJWGZXQUZKYjA
4- Reboot
5- [This is an optional step maybe you need for it and maybe not] If you flashed this rom and you stuck in a bootloop or anything didn't work probably then flash this bootloop fix from this link: https://mega.nz/#!AJcwERiQ!FUmk6eS5aoVsFSZ1f4WZIELIt7sckPCj11n0AIdCNzU
6- Done
Mostafa Sherif said:
Yup you can
1- Make factory reset
2- Wipe > Data, Cache, System and Dalivk/ART cache
3- Download and flash D6503_Customized US_1281-9709_23.5.A.0.575_R3D flashable-prerooted-signed from this link: https://drive.google.com/open?id=0B-xW4tRK0miyc1RJWGZXQUZKYjA
4- Reboot
5- [This is an optional step maybe you need for it and maybe not] If you flashed this rom and you stuck in a bootloop or anything didn't work probably then flash this bootloop fix from this link: https://mega.nz/#!AJcwERiQ!FUmk6eS5aoVsFSZ1f4WZIELIt7sckPCj11n0AIdCNzU
6- Done
Click to expand...
Click to collapse
I just love when we get a happy ending lol :silly:
Thank you and keep up the good work.
Rickpg said:
I just love when we get a happy ending lol :silly:
Thank you and keep up the good work.
Click to expand...
Click to collapse
Hahahahahahahahahahaha You are welcome anytime my bro.
Because marshmallow not allow me to enter recovery, according install the ROM comes with preinstalled root and recovery and nothing
ermite666 said:
Because marshmallow not allow me to enter recovery, according install the ROM comes with preinstalled root and recovery and nothing
Click to expand...
Click to collapse
No no bro, you can enter recovery in marshmallow but instead of keep pressing on volume up as in lollipop to enter the recovery, in marshmallow you have to keep pressing on volume down to enter the recovery when you reboot your phone and the sony logo appears
So try and tell me
Related
So trying to fastboot my phone with doomlord Xperiasspeed
I did the command :
Fastboot flash system boot.img
and i changed the name of the xperiasspeed.img to boot.img
Everything said it installed successfully, but now when I press the power button, it vibrates but does not boot.
I can get back into fastboot mode but thats it.
any help or ideas?
thanks
Flashtool.
could you possibly elaborate?
I am downloading the flashtool but what is the purpose and how do you use it?
I'm not an expert but it not sound like bricked device, but rather kernel installation that went wrong.
Just try flashing one more time, or flash your backup. You did a backup aren't you?
Sent from my LT26i using xda premium
brdl04 said:
could you possibly elaborate?
I am downloading the flashtool but what is the purpose and how do you use it?
Click to expand...
Click to collapse
Read the docs, there's a nice guide. You can also try the repair feature in PC Companion, but it might require the system to boot, so not sure.
K900 said:
Read the docs, there's a nice guide. You can also try the repair feature in PC Companion, but it might require the system to boot, so not sure.
Click to expand...
Click to collapse
What docs are you refferring to?
I have downloaded stock LT22_6.0.B.1.654.zip and am wanting to use the flash tool to flash this .img
OK step by step
Your phone could be easily recovered, we can try to do it
1.- have you tried a cold reboot ?? (with the xperia S hold both VOLUME UP key and POWER key during 10 to 15 seconds until device vibrates three times, not sure if it's the same with the P, then press power and check if it boots)
Still stuck??
2.- Download flashtool 0.8.0 and install it from here: http://androxyde.github.com/Flashtool/
-then download the 0.8.6 update and install it too
-then download a STOCK xperia P FTF and put it in the flashtool/firmwares folder (it should be in the root of your har drive, eg.: c:\flashtool\firmwares)
-then, enter flash mode (with the phone off hold VOL DOWN while connecting the USB cable to PC -> the LED will light green) and let your PC install the drivers
-then remove the USB cable, run Flashtool, press the flash button (the thunder icon), select "Flashmode" and click OK, select yourstock firmware for Xperia P and press OK
-When asked, enter flashmode again (flashtool shows an old xperia device, use the proper key combination for your device as stated before) and flash a fresh copy of the stock firmware.
-After flashing is complete, disconnect phone and press power to check if it's all OK.
---------- Post added at 12:37 AM ---------- Previous post was at 12:29 AM ----------
--------------------------------------------------------------------------------------
brdl04 said:
So trying to fastboot my phone with doomlord Xperiasspeed
I did the command :
Fastboot flash *system* boot.img
and i changed the name of the xperiasspeed.img to boot.img
...
Click to expand...
Click to collapse
BEWARE !!
1.- You are very confused my friend, "xperiasspeed" is from krabappel2548, not form doomlord.
2.- The proper commands should be:
To flash a boot image:
Code:
fastboot flash [B]boot[/B] boot.img
To flash a system image:
Code:
fastboot flash [B]system[/B] system.img
I am not sure what did you download from krabappel2548, but it seems you flashed a "boot" image to your phone's "system" image
You are mixing stuff up
Please read this guide before attempting anything again
-------------------------------------------------------------------------------------------------------------------------
Another advice:
Fastboot and Flashtool are different ways to flash.
To flash with flashtool you enter flash mode -> press the VOLUME DOWN key -> LED turns GREEN
To flash with fastboot you enter fastboot mode -> press VOLUME UP key -> LED turns BLUE
.
gtrab said:
OK step by step
Your phone could be easily recovered, we can try to do it
1.- have you tried a cold reboot ?? (with the xperia S hold both VOLUME UP key and POWER key during 10 to 15 seconds until device vibrates three times, not sure if it's the same with the P, then press power and check if it boots)
Still stuck??
2.- Download flashtool 0.8.0 and install it from here: http://androxyde.github.com/Flashtool/
-then download the 0.8.6 update and install it too
-then download a STOCK xperia P FTF and put it in the flashtool/firmwares folder (it should be in the root of your har drive, eg.: c:\flashtool\firmwares)
-then, enter flash mode (with the phone off hold VOL DOWN while connecting the USB cable to PC -> the LED will light green) and let your PC install the drivers
-then remove the USB cable, run Flashtool, press the flash button (the thunder icon), select "Flashmode" and click OK, select yourstock firmware for Xperia P and press OK
-When asked, enter flashmode again (flashtool shows an old xperia device, use the proper key combination for your device as stated before) and flash a fresh copy of the stock firmware.
-After flashing is complete, disconnect phone and press power to check if it's all OK.
---------- Post added at 12:37 AM ---------- Previous post was at 12:29 AM ----------
--------------------------------------------------------------------------------------
BEWARE !!
1.- You are very confused my friend, "xperiasspeed" is from krabappel2548, not form doomlord.
2.- The proper commands should be:
To flash a boot image:
Code:
fastboot flash [B]boot[/B] boot.img
To flash a system image:
Code:
fastboot flash [B]system[/B] system.img
I am not sure what did you download from krabappel2548, but it seems you flashed a "boot" image to your phone's "system" image
You are mixing stuff up
Please read this guide before attempting anything again
-------------------------------------------------------------------------------------------------------------------------
Another advice:
Fastboot and Flashtool are different ways to flash.
To flash with flashtool you enter flash mode -> press the VOLUME DOWN key -> LED turns GREEN
To flash with fastboot you enter fastboot mode -> press VOLUME UP key -> LED turns BLUE
.
Click to expand...
Click to collapse
When I hold down the Volume Down button and connect my Xperia P to flashtool, the notification LED goes green but the window with the old Xperia device doesn't go away and after a while the green LED turns red and the screen shows the charging animation.
I can enter CWM while the device powers up but I can't mount USB storage. My bootloader is locked and I tried to install the .54 small app tweak on my .544 (I didn't think it'd be an issue, but I was wrong! I'm a n00b. Nu H8 Pl0x )
I've also tried using the Sony Update Service but it can't detect my firmware because it can't detect my phone in Flash mode
Someone please help me. I've searched everywhere but couldn't find a solution.
I have the same problem, did you ever get this solved?
Old thread
Eason85 said:
I have the same problem, did you ever get this solved?
Click to expand...
Click to collapse
eswawan said:
Old thread
Click to expand...
Click to collapse
Check these websites. It will help.
If you are still confused about the process, ask again specifically!
http://developer.sonymobile.com/services/flash-tool/use-the-flash-tool-for-xperia-devices/
Hi, I tried to install a custom JB rom on my Sony Xperia U but now I'm in a reboot loop when i connect my device to the computer it connects and disconnects all the time cannot even flash please help thanks.
Are you connecting it off, then holding Vol - to trigger fastboot on USB? Don't do it when it's bootlooping.
Check the following things:
1 you have unlocked bootloader.
2 you have Xperia u fastboot and flashing drivers properly installed.
Reinstall drivers if you aren't sure whether they're properly installed or not
3 you said you're getting bootloop so your device isn't bricked..
4 take out the battery and insert again and press volume down button for flashmode and flash stock ics
5 flash boot.img from kernel zip file in FASTBOOT MODE.. If you're not sure how to do that there's a guide available in forum.. Search for it
6 then reboot to recovery, do wipes, then flash the Rom...
7 reboot twice
8 second reboot takes 10 mins don't freak out its normal
9 enjoy
AD9295 said:
Check the following things:
1 you have unlocked bootloader.
2 you have Xperia u fastboot and flashing drivers properly installed.
Reinstall drivers if you aren't sure whether they're properly installed or not
3 you said you're getting bootloop so your device isn't bricked..
4 take out the battery and insert again and press volume down button for flashmode and flash stock ics
5 flash boot.img from kernel zip file in FASTBOOT MODE.. If you're not sure how to do that there's a guide available in forum.. Search for it
6 then reboot to recovery, do wipes, then flash the Rom...
7 reboot twice
8 second reboot takes 10 mins don't freak out its normal
9 enjoy
Click to expand...
Click to collapse
Thanks!, It worked my device is working normally now .. but I can't really find a guide on how to install the boot.img can you please link me to it ? thanks.
GoldenMikez said:
Thanks!, It worked my device is working normally now .. but I can't really find a guide on how to install the boot.img can you please link me to it ? thanks.
Click to expand...
Click to collapse
the command for fastboot is
fastboot flash boot boot.img
the boot.img file must be in same folder as fastboot
there are two methods :
i recommend second method..
1. using command prompt
procedure - download adb and fastboot drivers.. extract them anywhere in pc.. copy the boot.img file to that extracted folder (i cant find the thread which contains the link for the drivers but u can definitely get it by google-ing it)
press and hold shift and right click..
select open command window here
switch off your phone
hold vol up key on ur phone and connect it to pc.. (blue led will come up)
then pass the command in command prompt as - fastboot flash boot boot.img
or
2 using flashtool
open flashtool
switch off your phone
hold vol up key on ur phone and connect it to pc.. u'll see in the flashtool that - device connected in fastboot mode
then clickon flash button and select fastboot
click on select kernel to flash and select boot.img which u extracted from kernel file..
Do these steps quickly.. fastboot mode automatically shuts down after 15-20 seconds and ur phone will start charging itself..
after flashing jb kernel reboot in recovery and then follow next steps
Enjoyy
reboot loop
im in a bootloop with a phantom kernel and i didnt place the rom in the phone storage, the telephone is rebooting again and again. i can acces to the CWM but i don't know how i can transplant the rom now :crying: thanks
My question is how to get into flashmode when formated system? So please help all I have a problem. Yesterday I just took my XP and turned it into CWM. Then i went into mounts and storage and accidentaly formated the system, then i got scared and rebooted my phone. Now it just boots and hangs on Sony logo. I tried hard reset by holding volume up +power for 10sec until phone vibrates 3 times. Then i tired to go into flashmode but when i connect it to pc green led shows out and after 2 or 3 sec. red light shows out and it just boots again into Sony logo. Please help somebody I just need to get into flashmode and then i can flash .tft with Flashtool. My phone is from O2 carrier (but unlocked all sim cards work) bootloader is locked. Please I really need help . Everybody who 'll help for me i'll say thanks
P.S Sorry for my bad English
First flash a custom rom
your's,
ajeteja.
---------- Post added at 08:16 PM ---------- Previous post was at 08:15 PM ----------
By formatting system.means deleting os u cant get paat the sony logo
your's,
ajeteja.
ajeteja said:
First flash a custom rom
your's,
ajeteja.
---------- Post added at 08:16 PM ---------- Previous post was at 08:15 PM ----------
By formatting system.means deleting os u cant get paat the sony logo
your's,
ajeteja.
Click to expand...
Click to collapse
Yeah I know but when I formated system from CWM I can't get into CWM anymore.
tauriuxx said:
Yeah I know but when I formated system from CWM I can't get into CWM anymore.
Click to expand...
Click to collapse
Install stock ICS using flashtool (in flashmode):
1. Download stock ICS
2. open flashtool
3. click on the ray
4. select flashmode
5. Click on browse to look for the ICS firmware you downloaded
6. Select "flash"
7. When it asks you for it, hold your devices volume down button and connect it to the PC
8. Wait for flash to end
After doing this you will be able to boot into ICS, if you want to access CWM, you'll have to install it again
carlaba2 said:
Install stock ICS using flashtool (in flashmode):
1. Download stock ICS
2. open flashtool
3. click on the ray
4. select flashmode
5. Click on browse to look for the ICS firmware you downloaded
6. Select "flash"
7. When it asks you for it, hold your devices volume down button and connect it to the PC
8. Wait for flash to end
After doing this you will be able to boot into ICS, if you want to access CWM, you'll have to install it again
Click to expand...
Click to collapse
It will be all good if I will be able to get into flashmode. But i Can't get into flash mode. I wrote that when i hold volume down and connect phone to pc green led comes out(computer won't detect it) and after few sec. red led comes out and then phone just boots again into sony logo I have SEUS and PC Companion on my pc but these don't work because computer won't detect my phone.
P.S I've tired this method on Windows 7 and windows xp but they both didn't work
tauriuxx said:
It will be all good if I will be able to get into flashmode. But i Can't get into flash mode. I wrote that when i hold volume down and connect phone to pc green led comes out(computer won't detect it) and after few sec. red led comes out and then phone just boots again into sony logo I have SEUS and PC Companion on my pc but these don't work because computer won't detect my phone.
Click to expand...
Click to collapse
Have you installed drivers correctly? What operative system do you have in your computer?
If you have not, go to C:/flashtool/drivers and intall them (you have to check your device and 2 last options in the installer (fastboot and flashmode)
carlaba2 said:
Have you installed drivers correctly? What operative system do you have in your computer?
If you have not, go to C:/flashtool/drivers and intall them (you have to check your device and 2 last options in the installer (fastboot and flashmode)
Click to expand...
Click to collapse
Yes my drivers are installed correctly, the flashmode worked before when i flashed stock tft. After flashing stock tft i installed a custom rom, then i went into cwm and accidentaly formated the system. I have Windows 7 x64 on my pc.
tauriuxx said:
Yes my drivers are installed correctly, the flashmode worked before when i flashed stock tft. After flashing stock tft i installed a custom rom, then i went into cwm and accidentaly formated the system. I have Windows 7 x64 on my pc.
Click to expand...
Click to collapse
I'm sorry that's all my knowledge for now, hope someone else in here can help you with this. If I were you, I'd try installing flashtool and drivers from scratch on another PC.
carlaba2 said:
I'm sorry that's all my knowledge for now, hope someone else in here can help you with this. If I were you, I'd try installing flashtool and drivers from scratch on another PC.
Click to expand...
Click to collapse
Whatever Anyway thanks for help. I'm going to leave my phone turned on all night so it will totaly discharge and then i will try to charge it and put into flashmode. Maybe this will work. I'll post the results if i'll fix my xp.
Phone is working!
When i tried discharging phone, that didn't help so i gave my phone to my friends dad because he is a good phone technican, and fixer. So what he did? That was akward moment :laugh:
1. When he conected phone to his pc (win xp) the computer detected my phone (my computer wasn't able to detect)
2. Then he just flashed some files. But not with Flashtool. He used program called SE2tools or something like that.
3. The phone booted up and now is working sucessfully
tauriuxx said:
When i tried discharging phone, that didn't help so i gave my phone to my friends dad because he is a good phone technican, and fixer. So what he did? That was akward moment :laugh:
1. When he conected phone to his pc (win xp) the computer detected my phone (my computer wasn't able to detect)
2. Then he just flashed some files. But not with Flashtool. He used program called SE2tools or something like that.
3. The phone booted up and now is working sucessfully
Click to expand...
Click to collapse
I think it was a driver problem after all. Next time if you have this problem again, even if you have already installed the drivers, try uninstalling and installing again... Windows is crazy , especially win8 which I'm hating more everyday lol
carlaba2 said:
Install stock ICS using flashtool (in flashmode):
1. Download stock ICS
2. open flashtool
3. click on the ray
4. select flashmode
5. Click on browse to look for the ICS firmware you downloaded
6. Select "flash"
7. When it asks you for it, hold your devices volume down button and connect it to the PC
8. Wait for flash to end
After doing this you will be able to boot into ICS, if you want to access CWM, you'll have to install it again
Click to expand...
Click to collapse
Hi,
I also committed the same mistake. Experiencing the same issue.
Please give a link to download the Stock ICS rom for Xperia Sola and Flashtool & its driver, so I can try your steps and make my phone work.
Thanks,
Irfan
saeedirfaan said:
Hi,
I also committed the same mistake. Experiencing the same issue.
Please give a link to download the Stock ICS rom for Xperia Sola and Flashtool & its driver, so I can try your steps and make my phone work.
Thanks,
Irfan
Click to expand...
Click to collapse
If you're boot loader is lockes you can use SUS then create the FTF file to flash with flashtool next time you need it.
If it's unlocked, use PCC to repair until the stage it ask you to connect the phonem then build the firmware FTF to flash with flashtool.
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Sola got stuck at Sony Boot Logo
ChikeD said:
If you're boot loader is lockes you can use SUS then create the FTF file to flash with flashtool next time you need it.
If it's unlocked, use PCC to repair until the stage it ask you to connect the phonem then build the firmware FTF to flash with flashtool.
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Click to expand...
Click to collapse
Placed the ROM.zip in sd card and did a full wipe. In my CWM, there is no option to go back, hence rebooted the system to install the ROM after full wipe. My phone got stuck at Sony logo and even unable to access CWM. Please help!
I did the following steps mentioned in the ROM page of XDA to install the custom ROM on my phone.
1. Flash boot.img from .zip via Fastboot ---- LEFT OUT THIS ONLY STEP BY MISTAKE and done the subsequent steps.
2. Enter CWM
3. Make a full wipe:
4. Wipe Data/Factory Reset
5. Wipe Cache
6. Wipe Dalvik Cache
7. format /data (advanced)
8. format /dache (advanced)
9. format /system (advanced)
-Flash ROM. --- YET TO FLASH THE ROM.
I'm unable to access CWM. I can't power off, I can only restart, but getting stuck at Sony logo everytime.
---------- Post added at 06:36 PM ---------- Previous post was at 06:24 PM ----------
ChikeD said:
If you're boot loader is lockes you can use SUS then create the FTF file to flash with flashtool next time you need it.
If it's unlocked, use PCC to repair until the stage it ask you to connect the phonem then build the firmware FTF to flash with flashtool.
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Click to expand...
Click to collapse
Installed Flashtool version 0.9.13.0 - Windows in 'C' drive. In that, installed Xperia Sola, Flashmode, Fastboot mode drivers. Drained all the charge and my phone was switched off. Launched the Flashtool, connected my switched off device to PC through USB holding the Volume Up key, and followed the steps (Click 1 to Click 8) as mentioned in the below link:
http://forum.xda-developers.com/showthread.php?t=1963961
When I did Click 4, I got an error in the Flashtool saying, This action needs a connected device in ADB mode.
When I did Click 5, I got an error in the Flashtool saying, This action can only be done in fastboot mode.
When I hold Volume Up/Down key and connect to PC through USB, only red LED lights up. It is not connecting to Fastboot mode, and neither to Flashmode. Please help!
Thanks.
saeedirfaan said:
Placed the ROM.zip in sd card and did a full wipe. In my CWM, there is no option to go back, hence rebooted the system to install the ROM after full wipe. My phone got stuck at Sony logo and even unable to access CWM. Please help!
I did the following steps mentioned in the ROM page of XDA to install the custom ROM on my phone.
1. Flash boot.img from .zip via Fastboot ---- LEFT OUT THIS ONLY STEP BY MISTAKE and done the subsequent steps.
2. Enter CWM
3. Make a full wipe:
4. Wipe Data/Factory Reset
5. Wipe Cache
6. Wipe Dalvik Cache
7. format /data (advanced)
8. format /dache (advanced)
9. format /system (advanced)
-Flash ROM. --- YET TO FLASH THE ROM.
I'm unable to access CWM. I can't power off, I can only restart, but getting stuck at Sony logo everytime.
---------- Post added at 06:36 PM ---------- Previous post was at 06:24 PM ----------
Installed Flashtool version 0.9.13.0 - Windows in 'C' drive. In that, installed Xperia Sola, Flashmode, Fastboot mode drivers. Drained all the charge and my phone was switched off. Launched the Flashtool, connected my switched off device to PC through USB holding the Volume Up key, and followed the steps (Click 1 to Click 8) as mentioned in the below link:
http://forum.xda-developers.com/showthread.php?t=1963961
When I did Click 4, I got an error in the Flashtool saying, This action needs a connected device in ADB mode.
When I did Click 5, I got an error in the Flashtool saying, This action can only be done in fastboot mode.
When I hold Volume Up/Down key and connect to PC through USB, only red LED lights up. It is not connecting to Fastboot mode, and neither to Flashmode. Please help!
Thanks.
Click to expand...
Click to collapse
Dude your a bit confused.
The only thing you may need flashtoo is first step (Flash boot.img from .zip via Fastboot ) all the rest is done in CWM recovery.
I don't know who told you to drain your baterry, but do not ever flash anything with baterry less than 50 percent, prefferrably fully charged.
Flash stock first, copy the zip to your SD card, then follow steps 1-9+.
For step 1 you need to extract boot.img from the rom zip on your pc.
To enter CWM recovery (after you flashed the boot.img), while device is booting (Sony LOGO) press volume down every second or so untill you are in CWM.
To nevigate in CWM, select - home key or power, move down - volume down or menu key, move up - volume up, exit/return to previous menu - back key or select at the bottom of the menu.
Stuck at Sony logo!
ChikeD said:
Dude your a bit confused.
The only thing you may need flashtoo is first step (Flash boot.img from .zip via Fastboot ) all the rest is done in CWM recovery.
I don't know who told you to drain your baterry, but do not ever flash anything with baterry less than 50 percent, prefferrably fully charged.
Flash stock first, copy the zip to your SD card, then follow steps 1-9+.
For step 1 you need to extract boot.img from the rom zip on your pc.
To enter CWM recovery (after you flashed the boot.img), while device is booting (Sony LOGO) press volume down every second or so untill you are in CWM.
To nevigate in CWM, select - home key or power, move down - volume down or menu key, move up - volume up, exit/return to previous menu - back key or select at the bottom of the menu.
Click to expand...
Click to collapse
No No bro listen, I did a mistake while installing the Custom ROM.
I forgot to flash the boot.img and did full wipe even formatted the system. Rebooted the system without installing the ROM. Now, stuck at Sony Logo. (NOTE: During this I had the battery charged full)
To rectify the above issue, I tried to flash the boot.img through fastboot mode in Flashtool and install the Custom ROM through CWM. To connect to flashtool, the device should be switched off. Now, I cant switch off. I can only restart. Hence, I drained the battery completely and tried to connect to Flashtool. When I hold Volume Up key and connect to PC through USB, only red LED lights up. It is not connecting to Fastboot mode, also when holding Volume Down key and connect to PC through USB, only red LED lights up. It is not connecting to Flashmode.
Please help!
Thanks.
saeedirfaan said:
No No bro listen, I did a mistake while installing the Custom ROM.
I forgot to flash the boot.img and did full wipe even formatted the system. Rebooted the system without installing the ROM. Now, stuck at Sony Logo. (NOTE: During this I had the battery charged full)
To rectify the above issue, I tried to flash the boot.img through fastboot mode in Flashtool and install the Custom ROM through CWM. To connect to flashtool, the device should be switched off. Now, I cant switch off. I can only restart. Hence, I drained the battery completely and tried to connect to Flashtool. When I hold Volume Up key and connect to PC through USB, only red LED lights up. It is not connecting to Fastboot mode, also when holding Volume Down key and connect to PC through USB, only red LED lights up. It is not connecting to Flashmode.
Please help!
Thanks.
Click to expand...
Click to collapse
No you do not need to drain the baterry, nor do you need to shut down the phone.
In the link you have provided it shows you how to boot into fastboot via adb (Click 4).
Recharge your phone and follow the steps given there.
Stuck at Sony logo!
ChikeD said:
No you do not need to drain the baterry, nor do you need to shut down the phone.
In the link you have provided it shows you how to boot into fastboot via adb (Click 4).
Recharge your phone and follow the steps given there.
Click to expand...
Click to collapse
I did the following things:
Set USB Debugging On from Settings - Developer Options.
Connect the phone to the PC. - My Phone is ON, but stuck at Sony Boot Logo
Click 1 - Click the Lightning icon.
Select 2 - Select the Fastboot Mode.
Click 3 - Click Ok.
Click 4 - Select Reboot Into Fastboot Via Adb and wait for the phone to go into fastboot mode. (Blue led). - Gets Error: This action needs a connected device in ADB mode
Click 5 - Select Reboot Into Fastboot Via Fastboot and wait for the phone to go into fastboot mode. (Blue led). - Gets Error: This action can only be done in fastboot mode
Click 6 and 7 - Select the boot.img or kernel.elf or kernel.sin. - Gets Error: This action can only be done in fastboot mode
Click 8 - Reboot phone. After reboot, the phone will be in recovery mode. - Gets Error: This action can only be done in fastboot mode
Please Help!
Irfan
saeedirfaan said:
I did the following things:
Set USB Debugging On from Settings - Developer Options.
Connect the phone to the PC. - My Phone is ON, but stuck at Sony Boot Logo
Click 1 - Click the Lightning icon.
Select 2 - Select the Fastboot Mode.
Click 3 - Click Ok.
Click 4 - Select Reboot Into Fastboot Via Adb and wait for the phone to go into fastboot mode. (Blue led). - Gets Error: This action needs a connected device in ADB mode
Click 5 - Select Reboot Into Fastboot Via Fastboot and wait for the phone to go into fastboot mode. (Blue led). - Gets Error: This action can only be done in fastboot mode
Click 6 and 7 - Select the boot.img or kernel.elf or kernel.sin. - Gets Error: This action can only be done in fastboot mode
Click 8 - Reboot phone. After reboot, the phone will be in recovery mode. - Gets Error: This action can only be done in fastboot mode
Please Help!
Irfan
Click to expand...
Click to collapse
Turn the phone off, no need to drain battery, just press power + volume up until you feel 1 + 3 vibrations, open flashtool and connect in fastboot mode (volume up while connecting USB)
Do you see device connected in fasboot mode in flashtool log?
Did you install fastboot drivers from flashtool?
What is you windows version?
Got it Worked!
ChikeD said:
Turn the phone off, no need to drain battery, just press power + volume up until you feel 1 + 3 vibrations, open flashtool and connect in fastboot mode (volume up while connecting USB)
Do you see device connected in fasboot mode in flashtool log?
Did you install fastboot drivers from flashtool?
What is you windows version?
Click to expand...
Click to collapse
Nothing worked, anyway thanks bro.
I gave the phone to the technician and he made it to work. Now, I have sony xperia sola running 6.1.1.b.1.10 firmware. I am unable to update it to 6.1.1.b.1.54, error displaying as unable to communicate with sony. No Root, No CWM, just an unlocked bootloader.
Now, please tell how to root from here (6.1.1.b.1.10 firmware) and install CWM and flash some new custom ROMs.
Thanks,
Irfan
HELP ! HELP ! HELP !
hard bricked by flashing a miui rom from twrp without deleting the emmc file :crying::crying::crying::crying::crying::crying:
i can only go to fastboot , no recovery , miui logo for 3 seconds
please someone help me !!! :crying::crying:
will the test point work ?
Edit :-
Thank you all , i managed to unbtick using test point .!!
I know enough to tell you that I'd you can get fastboot yo work, its not bricked. Honestly I don't own the device. I own lg g3. And it might be different for this device but you can try pushing recovery from fasyboot mode using your PC. You might wanna google how to tbh and ask around ppl with similar device if possible. Pushing through fastboot/adb is most common so pushing recovery will format recovery partition and install/push new one. That will get you working recovery. (I hope). Happy flashing.
In fastboot check if bootloader is locked by running the device info command... It is not locked you have hopes... Use fastboot to flash fastboot rom package with modified emmc file and modded image...
Its locked
Only way is to do test point method or take it to a service center
#BATMAN# said:
HELP ! HELP ! HELP !
hard bricked by flashing a miui rom from twrp without deleting the emmc file :crying::crying::crying::crying::crying::crying:
i can only go to fastboot , no recovery , miui logo for 3 seconds
please someone help me !!! :crying::crying:
will the test point work ?
Click to expand...
Click to collapse
try 1. this:http://en.miui.com/thread-235865-1-1.html
2. http://en.miui.com/thread-244814-1-1.html
3.http://en.miui.com/forum.php?mod=viewthread&tid=257227&highlight=test%2Bpoint%2Bredmi%2Bnote%2B3
4.http://en.miui.com/thread-245347-1-1.html
Let me know if you have succes!Good luck!
Luiggi79 said:
try 1. this:http://en.miui.com/thread-235865-1-1.html
2. http://en.miui.com/thread-244814-1-1.html
3.http://en.miui.com/forum.php?mod=viewthread&tid=257227&highlight=test%2Bpoint%2Bredmi%2Bnote%2B3
4.http://en.miui.com/thread-245347-1-1.html
Let me know if you have succes!Good luck!
Click to expand...
Click to collapse
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
faced the same problem bro better give it in care if dnt wnt to give it to care just go to( http://en.miui.com/thread-235865-1-1.html ) or try ( http://xiaomitips.com/guide/fix-bricked-redmi-note-3-no-unlock-permission/ ) this if all didnt work go to care bro
#BATMAN# said:
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
Click to expand...
Click to collapse
Steps:
A).On the computer in windows disable driver signature enforcement featrure and turn off any protection like security suites,AV software or firewalls.To disable driver signature enforcement you must open command prompt and type:a)bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS and press enter
b)bcdedit.exe -set TESTSIGNING ON and press enter
c)reboot computer
d) install MI flash after reboot;download it from here :http://en.miui.com/thread-235865-1-1.html
B) On the phone:
1.Hold Vol - and Vol + and plug Usb cable in computer&phone
2.download ADB files from here http://en.miui.com/thread-235865-1-1.html
3.extract files from archive to folder
4. in this folder,where you have extracted adb files press:shift on keyboard and right click on the mouse in the same time and choose "open command window here"
5.in command window type:a)adb devices and press enter
b)adb reboot edl and press enter
Now you are in download mode
6.from device manager install qualcomm driver;it should be seen in other devices section;right click---update driver----navigate to :C/Program files(X86)/XIaomi/Mi flash/Qualcomm/Driver;Note:you need x64 windows computer for this operation
7.start MI flash---right click and run as administrator;browse for rom folder,you need a fastboot rom(the rom need with suffix tgz to be;not zip).Put the tgz archive(rom) in Local Disk C and extract with winrar!!!!!!(use winrar) to folder;rename the created folder to ROM.In MI flash when do browse for folder SELECT ENTIRE FOLDER NOT JUST THE FOLDER IMAGES.OK?
8.in MI Flash window press refresh button from up side;the device should appear on the list
9.in MI Flash windows in the down side of windows tick the litlle circle who say:Flash all
10.Press flash button from up
1.1. Wait until it finish flashing procedure:should appear in the right side from device peration completed succesfully
12.Remove usb cable and press power button on the device;keep the power button pressed until the device give you a vibration,the release it
Luiggi79 said:
Steps:
A).On the computer in windows disable driver signature enforcement featrure and turn off any protection like security suites,AV software or firewalls.To disable driver signature enforcement you must open command prompt and type:a)bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS and press enter
b)bcdedit.exe -set TESTSIGNING ON and press enter
c)reboot computer
d) install MI flash after reboot;download it from here :http://en.miui.com/thread-235865-1-1.html
B) On the phone:
1.Hold Vol - and Vol + and plug Usb cable in computer&phone
2.download ADB files from here http://en.miui.com/thread-235865-1-1.html
3.extract files from archive to folder
4. in this folder,where you have extracted adb files press:shift on keyboard and right click on the mouse in the same time and choose "open command window here"
5.in command window type:a)adb devices and press enter
b)adb reboot edl and press enter
Now you are in download mode
6.from device manager install qualcomm driver;it should be seen in other devices section;right click---update driver----navigate to :C/Program files(X86)/XIaomi/Mi flash/Qualcomm/Driver;Note:you need x64 windows computer for this operation
7.start MI flash---right click and run as administrator;browse for rom folder,you need a fastboot rom(the rom need with suffix tgz to be;not zip).Put the tgz archive(rom) in Local Disk C and extract with winrar!!!!!!(use winrar) to folder;rename the created folder to ROM.In MI flash when do browse for folder SELECT ENTIRE FOLDER NOT JUST THE FOLDER IMAGES.OK?
8.in MI Flash window press refresh button from up side;the device should appear on the list
9.in MI Flash windows in the down side of windows tick the litlle circle who say:Flash all
10.Press flash button from up
1.1. Wait until it finish flashing procedure:should appear in the right side from device peration completed succesfully
12.Remove usb cable and press power button on the device;keep the power button pressed until the device give you a vibration,the release it
Click to expand...
Click to collapse
im trying now! hopefully it will work :good::good:
#BATMAN# said:
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
Click to expand...
Click to collapse
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Stuck at mi logo
Device unlocked
bootloader unlocked
twrp working
how to get rid of this
fylim said:
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Click to expand...
Click to collapse
me too , im still searching for a solution ......:crying::crying::crying::crying::crying:
the only solution i found was the test point but im trying to fix it without opening my phone
i you find anything please let me know !!!!!!!!!!!!!!!!
avrrv3689 said:
Device unlocked
bootloader unlocked
twrp working
how to get rid of this
Click to expand...
Click to collapse
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
#BATMAN# said:
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
Click to expand...
Click to collapse
finlly got out of it
thanxx
can u suggest a procedure to unlock bootloader and root the device and twrp without bricking or bootloop
avrrv3689 said:
finlly got out of it
thanxx
can u suggest a procedure to unlock bootloader and root the device and twrp without bricking or bootloop
Click to expand...
Click to collapse
Read these carefully #DO AT YOUR OWN RISK#
http://forum.xda-developers.com/redmi-note-3/how-to/unlock-instruction-unlock-bootloader-t3355904
http://forum.xda-developers.com/redmi-note-3/how-to/unlock-bootloader-twrp-root-7-2-3-t3359492
http://forum.xda-developers.com/redmi-note-3/how-to/redmi-note3-prokenzo-guiderom-global-t3341102
:good: hit thanks if i helped you :good:
#BATMAN# said:
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
Click to expand...
Click to collapse
"BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY"
If bootloader is unlocked officially then can we flash any MIUI recovery ROM using TWRP without need of modifying Recovery ROM (deleting bootloader file , patch boot.img) ? can we switch to any MIUI ROM then easily ?
akhil17kr said:
"BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY"
If bootloader is unlocked officially then can we flash any MIUI recovery ROM using TWRP without need of modifying Recovery ROM (deleting bootloader file , patch boot.img) ? can we switch to any MIUI ROM then easily ?
Click to expand...
Click to collapse
Yes i think you can but im not 100% sure :good::good:
#BATMAN# said:
Yes i think you can but im not 100% sure :good::good:
Click to expand...
Click to collapse
Oh Lol , have asked many people but none of them are sure about this .. but i have asked from mi chat they said once bootloader is unlocked you can't lock it back by flashing MIUI roms as it's security feature . SO we can say unofficial method is problem if you like to switch to between ROM's but official one will not create any problems ..still not sure though have to ask who have done through Official method.
fylim said:
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Click to expand...
Click to collapse
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
To enter in download mode see this youtube video:https://www.youtube.com/watch?v=4Fs5n3W1c8U
---------- Post added at 12:10 PM ---------- Previous post was at 12:07 PM ----------
#BATMAN# said:
me too , im still searching for a solution ......:crying::crying::crying::crying::crying:
the only solution i found was the test point but im trying to fix it without opening my phone
i you find anything please let me know !!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here: http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
How to enter in download mode see this youtube video :https://www.youtube.com/watch?v=4Fs5n3W1c8U
Luiggi79 said:
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
To enter in download mode see this youtube video:https://www.youtube.com/watch?v=4Fs5n3W1c8U
---------- Post added at 12:10 PM ---------- Previous post was at 12:07 PM ----------
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here: http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
How to enter in download mode see this youtube video :https://www.youtube.com/watch?v=4Fs5n3W1c8U
Click to expand...
Click to collapse
didn't work for me !:crying::crying:
Good day
Permission to post
I was here to seek help on how to fix my sony xperia Z2
I was flashing my Z2 but accidentally I didn't notice that i click the wrong firmware
and my z2 is not booting. it said that failed to update the new system.
please help me I dont know what to do.
damulag1234 said:
Good day
Permission to post
I was here to seek help on how to fix my sony xperia Z2
I was flashing my Z2 but accidentally I didn't notice that i click the wrong firmware
and my z2 is not booting. it said that failed to update the new system.
please help me I dont know what to do.
Click to expand...
Click to collapse
Hi
Do Flash a New Rom of your Phone with Flashtools v 0.9.18.5
sєňţ ғяom тнe ҡıňɢ ♔ Z2
Sajad Askari said:
Hi
Do Flash a New Rom of your Phone with Flashtools v 0.9.18.5
sєňţ ғяom тнe ҡıňɢ ♔ Z2
Click to expand...
Click to collapse
my z2 is turned off and i cant open it to allow usb debugging sir,
what should I do? i think my z2 got brick
damulag1234 said:
my z2 is turned off and i cant open it to allow usb debugging sir,
what should I do? i think my z2 got brick
Click to expand...
Click to collapse
No problem
Just install Flashtools V 0.9.18.5
And install Your Drivers
And Do flash Your Rom
No need usb Debugging
Are You Can Flash Stock ROM?
sєňţ ғяom тнe ҡıňɢ ♔ Z2
Unless you've messed up the TA partition, our phones are pretty hard to brick. If you hold vol_up then plug in USB to your PC, it should boot into flash mode with a blue LED. That means you can use Flashtool to flash an FTF file to the phone, effectively factory program it.
Si_NZ said:
Unless you've messed up the TA partition, our phones are pretty hard to brick. If you hold vol_up then plug in USB to your PC, it should boot into flash mode with a blue LED. That means you can use Flashtool to flash an FTF file to the phone, effectively factory program it.
Click to expand...
Click to collapse
my z2 is turned off and i already flashed but i used a wrong firmware.
my z2 now is not opening or booting and it say The software update failed
what should i do?
damulag1234 said:
Good day
Permission to post
I was here to seek help on how to fix my sony xperia Z2
I was flashing my Z2 but accidentally I didn't notice that i click the wrong firmware
and my z2 is not booting. it said that failed to update the new system.
please help me I dont know what to do.
Click to expand...
Click to collapse
Hey, don't worry if you do these steps exactly then your phone will boot again normally and you can enter the recovery then flash any rom again and recover your phone from this brick
1- Download and install Minimal ADB and Fastboot from this link: https://www.androidfilehost.com/?fid=24521665358595410
2- Download and install Flashtool drivers from this link: http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4
Skip Step 2 if you already installed Flashtool Drivers that install with Flashtool if you have installed it.
3- Download the latest twrp recovery from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img
4- Move the twrp recovery that you have downloaded in step 3 to this Path C:\Program Files\Minimal ADB and Fastboot
5- Download this kernel from this link: https://drive.google.com/file/d/0Bwn7bAJ-USZjZzg0Q2I2RWlWa1U/view?pref=2&pli=1
6- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
7- put your phone in fastboot mode by this way >> (Power off your phone completely then wait for 10 second then press and hold the volume up then connect your phone to the computer with usb cable while you are pressing and holding the volume up then the led will change it's color to blue.. that is the fastboot mode)
8- Now go to the Minimal ADB and Fastboot folder in that path (C:\Program Files\Minimal ADB and Fastboot) Press shift button from keyboard then press right click form mouse while pressing the shift button you will find an option [Open command window here] Press it.
9- In the command window write this command exactly: fastboot flash recovery twrp-3.0.2-0-sirius.img
10- Then write this command after it: fastboot flash boot boot.img
11- After it flashed successfully reboot your phone by writing this command: fastboot reboot then unplug the usb from the phone
12- when the phone reboot and the sony logo appears keep pressing the volume up and down until the twrp recovery opens
13- Done
Through the recovery flash any custom or stock rom and your phone will boot normally
I wish that i had helped you if you want any thing just ask me and i will answer.
Mostafa Sherif said:
Hey, don't worry if you do these steps exactly then your phone will boot again normally and you can enter the recovery then flash any rom again and recover your phone from this brick
1- Download and install Minimal ADB and Fastboot from this link: https://mega.nz/#!7942XJjI!9gurv7k3P...RTiDPeArhwjXsG XB9c
2- Download and install Flashtool drivers from this link: http://doomlord.xperia-files.com/dow...41LTIwMTQwMzE4
Skip Step 2 if you already installed Flashtool Drivers that install with Flashtool if you have installed it.
3- Download the latest twrp recovery from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img.html
4- Move the twrp recovery that you have downloaded in step 3 to this Path C:\Program Files\Minimal ADB and Fastboot
5- Download this kernel from this link: https://drive.google.com/file/d/0Bwn...ew?usp=sharing
6- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
7- put your phone in fastboot mode by this way >> (Power off your phone completely then wait for 10 second then press and hold the volume up then connect your phone to the computer with usb cable while you are pressing and holding the volume up then the led will change it's color to blue.. that is the fastboot mode)
8- Now go to the Minimal ADB and Fastboot folder in that path (C:\Program Files\Minimal ADB and Fastboot) Press shift button from keyboard then press right click form mouse while pressing the shift button you will find an option [Open command window here] Press it.
9- In the command window write this command exactly: fastboot flash recovery twrp-3.0.2-0-sirius.img
10- Then write this command after it: fastboot flash boot boot.img
11- After it flashed successfully reboot your phone by writing this command: fastboot reboot then unplug the usb from the phone
12- when the phone reboot and the sony logo appears keep pressing the volume up and down until the twrp recovery opens
13- Done
Through the recovery flash any custom or stock rom and your phone will boot normally
I wish that i had helped you if you want any thing just ask me and i will answer.
Click to expand...
Click to collapse
i need the key to download can you provide it for me?
damulag1234 said:
i need the key to download can you provide it for me?
Click to expand...
Click to collapse
Ok, no problem but for which one?!
Mostafa Sherif said:
Ok, no problem but for which one?!
Click to expand...
Click to collapse
sir can you provide me all the needed files? the download links are not working. and the other needs key to be downloaded
damulag1234 said:
sir can you provide me all the needed files? the download links are not working. and the other needs key to be downloaded
Click to expand...
Click to collapse
Sorry for this problem,, but i have edited my post and provided you with a new alternative link (for Minimal ADB and Fastboot) see it again.
and i will check the other links now and if any another link is unavailable i will change it for you.
Mostafa Sherif said:
Ok, no problem but for which one?!
Click to expand...
Click to collapse
1. download link need key
2. download link is not working
3. downloaded
5.download link is not working
damulag1234 said:
1. download link need key
2. download link is not working
3. downloaded
5.download link is not working
Click to expand...
Click to collapse
Check now all the download links again,, it should works now normally
Tell me if there is any another thing
Sorry for that
Mostafa Sherif said:
Check now all the download links again,, it should works now normally
Tell me if there is any another thing
Sorry for that
Click to expand...
Click to collapse
how to use md5 file? do i just need to paste it?
damulag1234 said:
how to use md5 file? do i just need to paste it?
Click to expand...
Click to collapse
Where do you get these files?? i didn't tell you to use any md5 file. and there is no md5 file to use it and if you have found any md5 file just ignore it and continue doing these steps only.
Do the steps as i write it and your phone will boot again successfully
Mostafa Sherif said:
Where do you get these files?? i didn't tell you to use any md5 file. and there is no md5 file to use it and if you have found any md5 file just ignore it.
Do the steps as i write it and your phone will boot again successfully
Click to expand...
Click to collapse
the twrp file is an md5 file sir
damulag1234 said:
the twrp file is an md5 file sir
Click to expand...
Click to collapse
Download the twrp.img from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img
After you download it you will see it's name is twrp-3.0.2-0-sirius.img
Then continue my steps normally and tell me if there is any problem
Mostafa Sherif said:
Hey, don't worry if you do these steps exactly then your phone will boot again normally and you can enter the recovery then flash any rom again and recover your phone from this brick
1- Download and install Minimal ADB and Fastboot from this link: https://www.androidfilehost.com/?fid=24521665358595410
2- Download and install Flashtool drivers from this link: http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4
Skip Step 2 if you already installed Flashtool Drivers that install with Flashtool if you have installed it.
3- Download the latest twrp recovery from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img
4- Move the twrp recovery that you have downloaded in step 3 to this Path C:\Program Files\Minimal ADB and Fastboot
5- Download this kernel from this link: https://drive.google.com/file/d/0Bwn7bAJ-USZjZzg0Q2I2RWlWa1U/view?pref=2&pli=1
6- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
7- put your phone in fastboot mode by this way >> (Power off your phone completely then wait for 10 second then press and hold the volume up then connect your phone to the computer with usb cable while you are pressing and holding the volume up then the led will change it's color to blue.. that is the fastboot mode)
8- Now go to the Minimal ADB and Fastboot folder in that path (C:\Program Files\Minimal ADB and Fastboot) Press shift button from keyboard then press right click form mouse while pressing the shift button you will find an option [Open command window here] Press it.
9- In the command window write this command exactly: fastboot flash recovery twrp-3.0.2-0-sirius.img
10- Then write this command after it: fastboot flash boot boot.img
11- After it flashed successfully reboot your phone by writing this command: fastboot reboot then unplug the usb from the phone
12- when the phone reboot and the sony logo appears keep pressing the volume up and down until the twrp recovery opens
13- Done
Through the recovery flash any custom or stock rom and your phone will boot normally
I wish that i had helped you if you want any thing just ask me and i will answer.
Click to expand...
Click to collapse
sir i cant understand the instruction on number 8 and 9
would you mind explaining it to me? thanks a lot
damulag1234 said:
sir i cant understand the instruction on number 8 and 9
would you mind explaining it to me? thanks a lot
Click to expand...
Click to collapse
No problem In step 8 first: Go to the path i told you in the description then press and hold shift button from keyboard and then press right click with mouse at any empty space in the folder,, a menu will pop up then you will find an option named (Open command window here) select it, then a command window will open.
I wish i had descriped it to you exactly and tell me if you successed to make it
If you do step 8 correctly then continue to step 9.. in step 9, you have to write the commands that i give it to you in the command window that have been opened in step 8.
The commands that i had bold it
Mostafa Sherif said:
No problem In step 8 first: Go to the path i told you in the description then press and hold shift button from keyboard and then press right click with mouse at any empty space in the folder,, a menu will pop up then you will find an option named (Open command window here) select it, then a command window will open.
I wish i had descriped it to you exactly and tell me if you successed to make it
If you do step 8 correctly then continue to step 9.. in step 9, you have to write the commands that i give it to you in the command window that have been opened in step 8.
The commands that i had bold it
Click to expand...
Click to collapse
i followed it what about the number 10? should i put it before i enter the command from number 9?