I was on Marshmallow beta for L22. Then i decided give Resurrection Remix rom a try. I installed it. But then by mistake i restored stock back up of 130 (Lollipop). Also i don;t have the back up of marshmallow beta now.
Now, whenever i try to flash 150 (Lollipop) version from fastboot (boot, recovery, system) the phone boots, but it doesn't display any fingerprint option or the model number is not displayed under settings.
I have even tried putting dload folder inside sd card. When i reboot to install it, the installation starts, but aborts immediately without any error. Then it displays just a shutdown device button. Can someone please help me get rid of this problem.
mani0608 said:
I was on Marshmallow beta for L22. Then i decided give Resurrection Remix rom a try. I installed it. But then by mistake i restored stock back up of 130 (Lollipop). Also i don;t have the back up of marshmallow beta now.
Now, whenever i try to flash 150 (Lollipop) version from fastboot (boot, recovery, system) the phone boots, but it doesn't display any fingerprint option or the model number is not displayed under settings.
I have even tried putting dload folder inside sd card. When i reboot to install it, the installation starts, but aborts immediately without any error. Then it displays just a shutdown device button. Can someone please help me get rid of this problem.
Click to expand...
Click to collapse
Did you try this >> http://forum.xda-developers.com/honor-5x/how-to/l22-captured-t3362123
Flash stock recovery first
clsA said:
Did you try this >> http://forum.xda-developers.com/honor-5x/how-to/l22-captured-t3362123
Flash stock recovery first
Click to expand...
Click to collapse
I will try that and post the updates. Thanks for sharing it.
clsA said:
Did you try this >> http://forum.xda-developers.com/honor-5x/how-to/l22-captured-t3362123
Flash stock recovery first
Click to expand...
Click to collapse
Dude that doesn't work
mani0608 said:
Dude that doesn't work
Click to expand...
Click to collapse
do you have stock recovery ?
did you factory reset from stock recovery ?
is your sdcard fat32 and the file in the dload folder
did you reboot with power + volume up + volume down ?
clsA said:
do you have stock recovery ?
did you factory reset from stock recovery ?
is your sdcard fat32 and the file in the dload folder
did you reboot with power + volume up + volume down ?
Click to expand...
Click to collapse
Yes i have stock recovery. I did factory reset and i even tried fastboot erase system and flash everything again (System, Boot, Recovery etc). But nothing worked.
The dload folder is in internal storage. I tried power + volume up + volume down with update.app but the installation aborted. I am going to post a screenshot of my settings > about device screen now. Looks like something is corrupted.
mani0608 said:
Yes i have stock recovery. I did factory reset and i even tried fastboot erase system and flash everything again (System, Boot, Recovery etc). But nothing worked.
The dload folder is in internal storage. I tried power + volume up + volume down with update.app but the installation aborted. I am going to post a screenshot of my settings > about device screen now. Looks like something is corrupted.
Click to expand...
Click to collapse
one of these files should work
http://forum.xda-developers.com/honor-5x/how-to/stock-roms-links-t3387899
clsA said:
one of these files should work
http://forum.xda-developers.com/honor-5x/how-to/stock-roms-links-t3387899
Click to expand...
Click to collapse
I have the same stock zip files (150) download from HiHonor. It is what i was trying to flash initially. I have an unlocked bootloader. But still it doesn't work for some reason.
mani0608 said:
I have the same stock zip files (150) download from HiHonor. It is what i was trying to flash initially. I have an unlocked bootloader. But still it doesn't work for some reason.
Click to expand...
Click to collapse
try the b130 first then the b150
be sure the stock recovery matches the version your flashing
mani0608 said:
I have the same stock zip files (150) download from HiHonor. It is what i was trying to flash initially. I have an unlocked bootloader. But still it doesn't work for some reason.
Click to expand...
Click to collapse
This is what my about phone screen now looks like. My phone just boots but it looks like a complete dummy OS like nothing was loaded properly.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is how the home screen looks after boot
clsA said:
try the b130 first then the b150
be sure the stock recovery matches the version your flashing
Click to expand...
Click to collapse
I tried this bro. But when i press (Vol down + vol up + power button) it does to the recovery for installing but stops at 0%. I waited the whole night. But it didn't progress.
mani0608 said:
I tried this bro. But when i press (Vol down + vol up + power button) it does to the recovery for installing but stops at 0%. I waited the whole night. But it didn't progress.
Click to expand...
Click to collapse
well that stinks, only thing else you can do is ask for a TWRP backup from KIW-L22 B150 and include everything in the new TWRP
and restore all the partitions except oeminfo (that one contains your phones serial number)
maybe @gopinaidu77 can post one for you.
clsA said:
well that stinks, only thing else you can do is ask for a TWRP backup from KIW-L22 B150 and include everything in the new TWRP
and restore all the partitions except oeminfo (that one contains your phones serial number)
maybe @gopinaidu77 can post one for you.
Click to expand...
Click to collapse
Its going to stink more...
I already have a TWRP backup of 130 which was shared by @gopinaidu77. I even tried that and it doesn't help. I am at work now. I will try everything again after reaching home and keep you posted.
clsA said:
well that stinks, only thing else you can do is ask for a TWRP backup from KIW-L22 B150 and include everything in the new TWRP
and restore all the partitions except oeminfo (that one contains your phones serial number)
maybe @gopinaidu77 can post one for you.
Click to expand...
Click to collapse
My total internal memory shows only 10GB and free is 9.5 GB. That's ridiculous.
I couldn't fix it. So i am currently using RR Rom. Its really good. Thank you @clsA for the inputs.
Related
Hi,
I can't get out of the bootloop of my Honor 7. Here below the history:
1) Unlock bootloader: Success
2) Install TWRP: Success
3) Install SuperSU 2.65: Fail
From this point i tried to recover from a new original rom with Multi-tool, but still bootloop. I also wipe all caches but still same issues. I don't know what to do as i have the feeling i tried everything already.
If someones could help me it would be nice. I still have access to bootloader (volume - & power) and I sometimes get access to TWRP but screen freezes, i can't go into any of the settings.
Thanks for your support!
Download full rom 121 if you are in LP or 320/330 if you are in MM.
Put the rom .app file into dload folder in the SDcard
Flash stock recovery,flash the rigth rom with vol+,+,vol-,+,pwr, the flashing will start automatly.
Upgrade to 180 or 330.
The files:
http://www.modaco.com/forums/topic/...ck-rom-images-updated-1st-april-2016-plk-l01/
Flamenawer said:
Download full rom 121 if you are in LP or 320/330 if you are in MM.
Put the rom .app file into dload folder in the SDcard
Flash stock recovery,flash the rigth rom with vol+,+,vol-,+,pwr, the flashing will start automatly.
Upgrade to 180 or 330.
The files:
http://www.modaco.com/forums/topic/...ck-rom-images-updated-1st-april-2016-plk-l01/
Click to expand...
Click to collapse
That won't work sadly, PLK-L01 is totally different than PLK-TL01H in terms of software.
The updates is also named differently compared to the European version, in the EU (and elsewere?) it's 180, 320, 330 etc. but on the PLK-TL01H it's 6.3.16, 6.4.1 etc.
Hi,
indeed Flamenaver the link you post is for PLK-L01 only.
Can i use one of these firmware instead which are original ones for PLK-TL01H?
http://emui.huawei.com/cn/plugin.php?id=hwdownload&mod=detail&mid=170
How does this VOL UP + VOL DOWN + Power works exactly? Do I need the press the 3 together until i see the upgrade starting or do I relesea as soon as I see HONOR Welcome Screen ?
Because it is not working if i keep the 3 pressed until something happens, because then it is restarting and restarting for ever.
On the other side, just pressing 3 for 10 seconds and couple of seconds after it powers on doesn't work neither.
Thanks for the support.
Tabithalos said:
That won't work sadly, PLK-L01 is totally different than PLK-TL01H in terms of software.
The updates is also named differently compared to the European version, in the EU (and elsewere?) it's 180, 320, 330 etc. but on the PLK-TL01H it's 6.3.16, 6.4.1 etc.
Click to expand...
Click to collapse
Try to install LP or MM full rom (no ota o zip roms),from stock recovery, with the standard process for your phone, is a universal unbrick procedure for soft_bricked phones.
I can't get access to stock recovery. I can reinstall Stock recovery from Honor Multi Tools but i can't get in it.
If i keep vol+ & Power or Vol+, Vol- & Power pressed i get onl the honor welcome screen bootloop, nothing else
Hi, I got into this mode in the end. Is this the Force update mode?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It was not easy to get in. Keep you informed in a couple of seconds what the results are.
Thanks
Tried twice already and always stuck at 90%...
sebastien_be said:
Tried twice already and always stuck at 90%...
Click to expand...
Click to collapse
If it's stuck at 90% it's not working, believe me, I've had the same problem, I tried to update SuperSU and it bricked. Had to factory reset it and update the phone to the newest version which currently is 6.4.1, THEN go through the process of installing TWRP, SuperSU etc.
If you can't get the updates via the "Updater" option in the options, try to manually downgrade/upgrade it and see if it appears. You have to do some fancy google-translate to chinese to find the update packages on chinese forums.
Why U don't try the Honor 7 Multitool and the huawei update extractor combo???
That must be work!
Hi,
this is the latest status: https://youtu.be/QsPOg4lKkSc
I'm already using Multi-Tools and extracted a PLK-TL01H stock rom. I then used the unbrick option in multi-tools and restores this stock rom. But even though it starts fine, i can enter my pin code but when the language screens comes in, it makes a weird noise and reboots.
I then went into TWRP which works fine and could wipe cache and wipe dalvik cache. But I'm still stuck with welcome crash.
Any idea what to do? As reminder:
1) Bootloader is unlocked
2) Bootloader screen works fine (fastboot works but adb doesn't)
3) TWRP screen also works fine.
Thank you!
Did you try with an older or an other stock rom?
Yes I tried these two versions;
PLK-TL01H-C01B201
PLK-UL-TL-CL_EMUI3.1_Android5.1_5.12.1
Actually this version: PLK-TL01H-C01B201 works fine but only without sim card and SD card. If one of these is inside then i get automated reboot after entering pin code. But if i reboot without these two, then the phone works fine (i can get access to wifi, menu, and so on...).
WEIRD!
Hi,
My Honor 7 is still bricked and i can't get out of it. I tried to unbrick by flashing the following files from a stock rom:
fastboot flash boot .\Unbrick\BOOT.img
fastboot flash cust .\Unbrick\CUST.img
fastboot flash recovery .\Unbrick\RECOVERY.img
fastboot flash system .\Unbrick\SYSTEM.img
The flash of these 4 files works fine. I then get the welcome screen where i can choose the language, HiCloud settings and so on. As long as i do not get out of the flight mode it seems to be stable. But when i enter the pin code of my simcard (amongst others), then i get a crash and reboot.
So i have the feeling that there are still some conflicts. In the stock rom there are many other IMG files. Shouldn't I also flash them? I have the following IMG files: 3RDMODEM, CACHE, CRC, CURVER, DTIMAGE, EFI, FASTBOOT, MODEM, etc etc.
I have the feeling that if i flash them all, then it might work fine. But all files do not have a specific partition, so i don't know how to flash them.
Thanks for the support!
sebastien_be said:
Hi,
My Honor 7 is still bricked and i can't get out of it. I tried to unbrick by flashing the following files from a stock rom:
fastboot flash boot .\Unbrick\BOOT.img
fastboot flash cust .\Unbrick\CUST.img
fastboot flash recovery .\Unbrick\RECOVERY.img
fastboot flash system .\Unbrick\SYSTEM.img
The flash of these 4 files works fine. I then get the welcome screen where i can choose the language, HiCloud settings and so on. As long as i do not get out of the flight mode it seems to be stable. But when i enter the pin code of my simcard (amongst others), then i get a crash and reboot.
So i have the feeling that there are still some conflicts. In the stock rom there are many other IMG files. Shouldn't I also flash them? I have the following IMG files: 3RDMODEM, CACHE, CRC, CURVER, DTIMAGE, EFI, FASTBOOT, MODEM, etc etc.
I have the feeling that if i flash them all, then it might work fine. But all files do not have a specific partition, so i don't know how to flash them.
Thanks for the support!
Click to expand...
Click to collapse
The main problem that you were on MM version (6.3.16-DEV edition of ROM, no official update) of ROM and you're trying to flash Lollipop (B201, 5.12.1). It means that your problems are probably caused by this. Try to flash 5.12.16 then OTA update to 6.1.1 (using WiFi if possible) and then rollback from Emui 4 to Emui 3.1 if you want use Emui 3.1 and Lollipop. it's up to you. It's possible that your will be able to use SIM card when you would update to 6.1.1 (MM)
Sent from PLK-TL01H
SOLVED!
Thank you Lucki_X and Inside!Out ! Indeed i was trying to flash with Android 5.0 while i was already on Android 6.
Consequently I used the unbrick option from Multi-tools by using this version PLK-TL01H_EMUI4.0_Android6.0_6.2.1(B634).zip
Now everything works fine. Can anyone tell me how to install SuperSU? Because it is due to installation of SuperSU through TWRP that it caused the crash. I installed SuperSU 2.65 BETA.
How to do and which version to install to avoid bootloop?
Thanks very much,
Sebastien.
Hi All,
any idea why i now only have 3,87GB available as internal storage?
sebastien_be said:
Hi All,
any idea why i now only have 3,87GB available as internal storage?
Click to expand...
Click to collapse
Probably because you have multiple ghost systems as a result of previous still in memory. Factory reset will help.
Thank you! This is also solved now (Factory reset in TWRP + Calvik & Cache Wipes)!
Last question: Any advice on how to install SuperSU? Because by trying to install 2.65 BETA it caused the bootloop earlier.
Is there any version to propose instead of another one?
Thanks,
To answer my question: There is only the v2.62 that is working with Honor7 ! I Tried 2.49 and 2.65 both creates startup bootloop. Hopefully this time i got a full backup made in TWRP, was pretty easy to comeback to a working version.
i have a similiar brick as you. Flashed from B201 to B352 via the OTA. Had a boodloop, tried to erase cache and factory reset.
Tried to unbrick my phone with multi tool (first with the B201 udpate.app - now with B634 update.app). Now i'm in a bootloop again. What can I do?
EDIT: I'm in the ROM now, but can't enable my SIM card and WIFI is also not working
What can i do?
Hye everyone. I started a new thread name "Huawei Mate 10 Lite Stock Firmware Backup".
In previous days i wiped all my partitions like System,Boot,Cust,Product etc through TWRP Recovery unfortunately.
Beside this Huawei didn't release stock firmware of my device so my device didn't boot anymore and whenever i enter in the recovery mode it shows up a message on the top "no OS installed". Here i stucked badly because i had not made any backup of boot, system, product vendor etc so i took my friend's device which is also Huawei Mate 10 Lite, i unlocked its bootloader and flash TWRP Recovery and make a backup of whole OS and restore it in my device and my device successfully booted.
I also post link of backup folder of version RNE-L21C185B131.
https://drive.google.com/open?id=16soc6NiVwoV0nwlxwlSHBn6zP1-iAGbp
Also post link of TWRP Recovery Mate 10 Lite Edition which has all features enable,,,,,,,,see screenshots in attachment.
https://drive.google.com/open?id=1pOmDFqhjCOU_myrD_s5-jgrWZF7pg8nb
Now , here is the guide how to restore backup files from other phone.
1. Download the "Stock Firmware backup.zip" from given link
2. Download TWRP Recovery Mate 10 lite Edition from this link if you have not flash that one (Reply on thread if you didn't know how to flash TWRP Recovery.)
3. Now put that files extract from ZIP into external sdcard in TWRP/BACKUPS/"Your phone's Serial number"/Stock backup
4. Now insert sd card and enter into TWRP Recovery.
5. If you didn't know serial number of your phone just past it in your sdcard directory.
6. Then Go to 'Mount' section and tick all the options then go back and open 'Restore' tab and tick following option BOOT, CUST IMAGE, PRODUCT IMAGE, VENDOR IMAGE, VERSION and SYSTEM. and go ahead.
7. Wait sometime, as restoring takes couple of minutes then Reboot your Device and it is booted successfully.
Enjoy....!
Hit Thanks if its Helpful.
Hi, my friend, I have an RNE-L03, which I brick, I managed to rescue it by installing the Rom from King Mezi, but I want to go back to the original firmware, you think I can use your backup on my device?
where is screen short bro
Huawei mate 10 lite rne-l21
Same problem plzz help me...
Twrp fomate all now booting problem
plzzz call me 03008605386
Hamidmirza said:
Hye everyone. I started a new thread name "Huawei Mate 10 Lite Stock Firmware Backup".
In previous days i wiped all my partitions like System,Boot,Cust,Product etc through TWRP Recovery unfortunately.
Beside this Huawei didn't release stock firmware of my device so my device didn't boot anymore and whenever i enter in the recovery mode it shows up a message on the top "no OS installed". Here i stucked badly because i had not made any backup of boot, system, product vendor etc so i took my friend's device which is also Huawei Mate 10 Lite, i unlocked its bootloader and flash TWRP Recovery and make a backup of whole OS and restore it in my device and my device successfully booted.
I also post link of backup folder of version RNE-L21C185B131.
https://drive.google.com/open?id=16soc6NiVwoV0nwlxwlSHBn6zP1-iAGbp
Also post link of TWRP Recovery Mate 10 Lite Edition which has all features enable,,,,,,,,see screenshots in attachment.
https://drive.google.com/open?id=1pOmDFqhjCOU_myrD_s5-jgrWZF7pg8nb
Now , here is the guide how to restore backup files from other phone.
1. Download the "Stock Firmware backup.zip" from given link
2. Download TWRP Recovery Mate 10 lite Edition from this link if you have not flash that one (Reply on thread if you didn't know how to flash TWRP Recovery.)
3. Now put that files extract from ZIP into external sdcard in TWRP/BACKUPS/"Your phone's Serial number"/Stock backup
4. Now insert sd card and enter into TWRP Recovery.
5. If you didn't know serial number of your phone just past it in your sdcard directory.
6. Then Go to 'Mount' section and tick all the options then go back and open 'Restore' tab and tick following option BOOT, CUST IMAGE, PRODUCT IMAGE, VENDOR IMAGE, VERSION and SYSTEM. and go ahead.
7. Wait sometime, as restoring takes couple of minutes then Reboot your Device and it is booted successfully.
Enjoy....!
Hit Thanks if its Helpful.
Click to expand...
Click to collapse
Bravo Bravo Bravo Hamidmirza and thanks
Software contains root
how can we unroot it,thank's
thxxxxxxxxxxxxx brooooooooooooooooooo
Can this be done without twrp installed + unlocked bootloader?
KURTALANLI said:
Software contains root
how can we unroot it,thank's
Click to expand...
Click to collapse
By doing factory data reset
t1ps said:
Can this be done without twrp installed + unlocked bootloader?
Click to expand...
Click to collapse
No bro, it cant b done without twrp.
What is condition of your phone?
I mean whats your problem with your mate 10 lite.
Peligrito2010 said:
Hi, my friend, I have an RNE-L03, which I brick, I managed to rescue it by installing the Rom from King Mezi, but I want to go back to the original firmware, you think I can use your backup on my device?
Click to expand...
Click to collapse
No, this backup is only for RNE-L21 models
Veecy1986 said:
Huawei mate 10 lite rne-l21
Same problem plzz help me...
Twrp fomate all now booting problem
Click to expand...
Click to collapse
Restore given backup folder in the thread.
hi bro
hello bro when i want to restore the backup the phone say unable to wipe product after that stop the recovery
please help bro
this is the image of restoring
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@Hamidmirza
thanks for your good contribution, I need the data partition to be able to work in RNE-L21C185, see it a browser has to be root for this
route: data / hw_init
copy it to a folder and upload it to a server to download it
Hamidmirza said:
No bro, it cant b done without twrp.
What is condition of your phone?
I mean whats your problem with your mate 10 lite.
Click to expand...
Click to collapse
So i tried relocking my mate 10 lite, but on the factory reset stage it sits at 99% for hours. I tried turning it off and on again, the factory reset went all fine but when i try to boot into the system it only boots into Erecovery.
t1ps said:
So i tried relocking my mate 10 lite, but on the factory reset stage it sits at 99% for hours. I tried turning it off and on again, the factory reset went all fine but when i try to boot into the system it only boots into Erecovery.
Click to expand...
Click to collapse
Did you factory reset your phone using stock recovery or twrp recovery?
Hamidmirza said:
Did you factory reset your phone using stock recovery or twrp recovery?
Click to expand...
Click to collapse
Before relocking, i flashed the stock recovery, so yes
t1ps said:
Before relocking, i flashed the stock recovery, so yes
Click to expand...
Click to collapse
I think you are very newest on the forum.
Relocking of bootloader is not possible even by using different softwares, it only can be relock by Huawei itself.
t1ps said:
Before relocking, i flashed the stock recovery, so yes
Click to expand...
Click to collapse
If your phone is in warranty, send back to company, they lock your phone's bootloader and install stock firmware
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official TWRP 3.6.1-* For Galaxy Note8 Exynos​Only for exynos variants - N950F (Single SIM: Europe, Australia); N950FD (Global Dual SIM: Europe, LATAM, Brazil; Australia); N950N (South Korea)
Disclaimer
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this recovery before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Features:
Code:
- built from Pie kernel source
- built from android-9.0 recovery sources
- built in full 64 mode
- fully compatible with Android 8.*/9.0/10.0
Downloads:
https://twrp.me/samsung/samsunggalaxynote8.html
Instructions:
Odin
Download latest Odin zip from downloads.corsicanu.ro/samsung
Download and install Samsung Drivers (if you have them installed you can skip this step)
Go to settings/Developer options and enable OEM unlock (If you don't see developer settings, go into Settings/About phone/Software info and tap "Build number" 10 times to show Developer options menu)
Download TWRP_*.tar
Switch off the phone
Use Bixby Key+Volume Down+Power to enter Download Mode and connect the device to usb
Open Odin and untick autoreboot in "options" tab. Also make sure that your device is detected
Put TWRP_*.tar.md5 file into AP tab
Click Start
When Odin shows "PASS", take your device in hands, disconnect the usb cable and press simultaneously the "Bixby key" + "Vol. Down" + "Power" buttons until the downoad mode disappears
At the precise moment the screen becomes black, immediately release the "Vol.Down" button and press the "Bixby key" + "Vol. UP" + "Power" buttons during 10 to 15sec to forcefully enter TWRP
If it didn`t worked, redo the steps from #1 more careful this time.
TWRP
Download TWRP_*.img, push it into phone storage, choose install image in your current recovery, navigate to downloaded *.img file, select it, select to flash as recovery.
After booting in TWRP download and flash no-verity-opt-encrypt-6.1 zip to disable data partition encryption
If for any reason you fail to install TWRP multiple times/different methods, make sure you check this thread
Sources:
Device tree - https://github.com/TeamWin/android_device_samsung_greatlte
Kernel - https://github.com/corsicanu/android_kernel_samsung_universal8895/tree/android-9.0
Recovery - https://github.com/omnirom/android_bootable_recovery
Credits:
TeamWin, jesec, geiti94, dyneteve, testers, donors and anyone else involved in making this possible
Misc links:
TeamWin official website
Telegram Support Group
Telegram Channel
Bootloaders / modems zips
Latest Magisk stable or canary
FAQ / Further reading
Q: TWRP can't mount data partition, what to do?
A: Make sure you formatted data partition.
Q: Phone is not booting even after 20 minutes
A: Try to reboot. If still not booting, make sure you formatted data partition.
Q: How to format data partition?
A:
Q: Phone is showing only Samsung logo
A: Try to reboot. If still not booting, consider installing an older TWRP build or a more recent firmware.
Q: I get "Failed to mount /preload message", what to do?
A: From wipe menu select Advanced Wipe, select preload partition to be wiped and reboot recovery.
Q: Why do i need to format data partition?
A: Because old rom encrypted your data partition and new rom can't decrypt and use that content / root needs access to data partition to place misc files / phone not booting after flashing root until data partition gets formatted.
No Download. Img file?
corsicanu said:
TWRP
Click to expand...
Click to collapse
Well done mate
Benny100 said:
No Download. Img file?
Click to expand...
Click to collapse
Its directly in the github link
No IMG file
https://github.com/TwrpBuilder/android_device_samsung_greatlte/releases
https://github.com/TwrpBuilder/android_device_samsung_greatlte/tags
Benny100 said:
No IMG file
https://github.com/TwrpBuilder/android_device_samsung_greatlte/releases
https://github.com/TwrpBuilder/android_device_samsung_greatlte/tags
Click to expand...
Click to collapse
Did you tried taping on Assets?
Found and is working Thx!...
I am using a modified twrp without data fix problem. Should i just flash the image file or i have to format data and setup from zero
tabish84 said:
I am using a modified twrp without data fix problem. Should i just flash the image file or i have to format data and setup from zero
Click to expand...
Click to collapse
datafix is for oreo issues where twrp could not properly access internal storage.
format is if you come from stock rom and still have encrypted storage.
Very nice start of the Note 8 Exy journey Bro ?
It is a big pleasure to see U around N8 development!
I am really excited now for the nearest few months and Your 'crazy' ideas which always bring some goodies ?
Thx for Ur efforts and good luck! ?
Works great thank you.
Dev Base August
Sent from my SM-N950F using XDA Labs
After flashing .img (was on 3.2.1.1) I get "Recovery is not seandroid enforcing", only when booting into recovery.
Seems to work fine otherwise.
N950N
Repulsa's ROM.
Is this normal behavior?
Pinan said:
After flashing .img (was on 3.2.1.1) I get "Recovery is not seandroid enforcing", only when booting into recovery.
Seems to work fine otherwise.
N950N
Repulsa's ROM.
Is this normal behavior?
Click to expand...
Click to collapse
im on the same phone and no such issue with new twrp i was on a newer twrp than yours and had formatted and flash dm verty zip initially from stock oreo. dirty flash your rom again just to see. if still no go then follow OP to the T to reflash it correctly.
did you ever flash oreo bootloader? because from what i understand, looks like you were on nougat before and flashed a oreo rom without upgrading fully to stock oreo before hand.
bober10113 said:
1. im on the same phone and no such issue with new twrp i was on a newer twrp than yours and had formatted and flash dm verty zip initially from stock oreo. dirty flash your rom again just to see. if still no go then follow OP to the T to reflash it correctly.
2. did you ever flash oreo bootloader? because from what i understand, looks like you were on nougat before and flashed a oreo rom without upgrading fully to stock oreo before hand.
Click to expand...
Click to collapse
1. I went from stock rom to Repulsa, using SuperSU. No issues.
2. Nougat to Oreo. Could be the issue. I did not update the BL. Don't know if the ROM did. I will check.
Do you happen to have a link to the correct BL?
Thanks for the tips!
Pinan said:
1. I went from stock rom to Repulsa, using SuperSU. No issues.
2. Nougat to Oreo. Could be the issue. I did not update the BL. Don't know if the ROM did. I will check.
Do you happen to have a link to the correct BL?
Thanks for the tips!
Click to expand...
Click to collapse
i could extract it but u can basically get it from unziping stock.(see link below)
since we are on the n950n, I'm almost sure repulsa rom didnt update it because mostly all roms that might include the BL will have mainly the F/DS bootloader, most dont even update it though.
latest BL would be U3. might be a good idea to update cp(modem) while you are at it too, so grab latest stock firmware and extract both from:
https://samsung-firmware.org/model/SM-N950N/
if download is slow, i can provide these 2 files in a few minutes because package is so big just to get them smaller files.
so only put bl and cp in odin and at least you will be on the latest stuff. dont know what is taking so long for BL U4 to arrive for our korean n950ns....
edit
latest bl and cp for N950N only:
https://1drv.ms/f/s!AhXVLDDj8g3AgdYhY8DslnHgCVMMEw
i also put samfirm downloader for future reference, its a fast way to get latest firmware. those hosting websites are so slow sometimes... updato.com is a fast one but firmwares arent always up to date though
bober10113 said:
latest bl and cp for N950N only:
https://1drv.ms/f/s!AhXVLDDj8g3AgdYhY8DslnHgCVMMEw
i also put samfirm downloader for future reference, its a fast way to get latest firmware. those hosting websites are so slow sometimes... updato.com is a fast one but firmwares arent always up to date though
Click to expand...
Click to collapse
Thank you very much. Most kind of you. :good:
Yes. I've used SamFirm before. Faster indeed.
@ bober10113.
All's well after new CP and BL. no more "Recovery is not seandroid enforcing".
Thanks again.
Good job mate :good:
Really glad we have this dev around. Will flash shortly
Version 10.2.26.0
Version 10.2.24.0 ------------ > Stock/Root
Version 10.2.9.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
T4Ump said:
Version 10.2.24.0 - Link
Click to expand...
Click to collapse
so what do we do with this? fastboot it? is it like a full rom with magisk, rooted? cheers
vtec303 said:
so what do we do with this? fastboot it? is it like a full rom with magisk, rooted? cheers
Click to expand...
Click to collapse
Fastboot flash boot.img
It's only magisk for 10.2.24
You can create your own if you want, it's just 30s faster
Code:
fastboot flash boot boot.img
Thank you so much for posting this. I'd been trying for 2 days with twrp and magisk (19.1 and 19.2) and could never get past the recovery bootloop on my Mi 9.
Are you on global stable?
I am having boot loop too.
So far I haven't seen any root for 10.2.9.0
Does anyone have boot.img V10.2.9.0.PFAMIXM? I wanna try root, but only need that file
xxx
T4Ump said:
xxx
Click to expand...
Click to collapse
Hi, thanks for the patched one. Do you still have the stock one? My phone stuck at recovery mode
Edited: nvm. I'll download the fastboot ROM. Thank you anyway.
realm9thfeb said:
Are you on global stable?
I am having boot loop too.
So far I haven't seen any root for 10.2.9.0
Click to expand...
Click to collapse
I don't get it, what are you trying to achieve? Keep encryption and have root access?
Right now i'm on 10.2.9.0 running perfectly fine with root (magisk 19.1) but no encryption.
PriPhaze said:
I don't get it, what are you trying to achieve? Keep encryption and have root access?
Right now i'm on 10.2.9.0 running perfectly fine with root (magisk 19.1) but no encryption.
Click to expand...
Click to collapse
Hi, could you tell me how you root your phone? I installed magisk manager, chose boot.img then got magisk_patched.img. I flashed it via fastboot flash boot magisk_patched.img but I got stuck at stock recovery after rebooting. Did I miss any step?
syreg said:
Hi, could you tell me how you root your phone? I installed magisk manager, chose boot.img then got magisk_patched.img. I flashed it via fastboot flash boot magisk_patched.img but I got stuck at stock recovery after rebooting. Did I miss any step?
Click to expand...
Click to collapse
What i did was:
-Flash Stock Global ROM with Xiaomi Flash making sure to set the bat as clean all and NOT clean and lock!
-Once done it will automatically boot , and when it does simply reboot and hold down vol to go to the fastboot
-Flash Recovery img using minimal adb and fastboot
-Type "Fastboot reboot" and hold vol up to go to twrp
-In TWRP FORMAT data to get ride off encryption and reboot into recovery
-Again in TWRP now u can transfer files to the phone, so i patched "Disable_Dm-Verity_ForceEncrypt" and then patched Magisk 19.1
-That's it.
You can now reboot and it will start the phone configuration as normal but once you configure everything u will see that magisk is there and fully works.
Just one thing tho.... be careful if u will restore titanium back up apps...
Don't get me wrong; they do restore correctly but when you make a backup it becomes corrupted or at least that's what happened to me, so make sure to keep backups PRIOR to using the ROM saved in your PC or something.
EDIT: Maybe u should give a try to this twrp https://forum.xda-developers.com/Mi-9/development/recovery-unofficial-twrp-xiaomi-mi-9-t3905825, just got updated few hrs ago and so far seems it works really good.
syreg said:
Hi, could you tell me how you root your phone? I installed magisk manager, chose boot.img then got magisk_patched.img. I flashed it via fastboot flash boot magisk_patched.img but I got stuck at stock recovery after rebooting. Did I miss any step?
Click to expand...
Click to collapse
I have this problem too, do this steps.
1. Fastboot ROM
2. Update last version
3. Flash magisk_patched.boot
4. Factory reset
Done, you have root.
PriPhaze said:
What i did was:
-Flash Stock Global ROM with Xiaomi Flash making sure to set the bat as clean all and NOT clean and lock!
-Once done it will automatically boot , and when it does simply reboot and hold down vol to go to the fastboot
-Flash Recovery img using minimal adb and fastboot
-Type "Fastboot reboot" and hold vol up to go to twrp
-In TWRP FORMAT data to get ride off encryption and reboot into recovery
-Again in TWRP now u can transfer files to the phone, so i patched "Disable_Dm-Verity_ForceEncrypt" and then patched Magisk 19.1
-That's it.
You can now reboot and it will start the phone configuration as normal but once you configure everything u will see that magisk is there and fully works.
Just one thing tho.... be careful if u will restore titanium back up apps...
Don't get me wrong; they do restore correctly but when you make a backup it becomes corrupted or at least that's what happened to me, so make sure to keep backups PRIOR to using the ROM saved in your PC or something.
EDIT: Maybe u should give a try to this twrp https://forum.xda-developers.com/Mi-9/development/recovery-unofficial-twrp-xiaomi-mi-9-t3905825, just got updated few hrs ago and so far seems it works really good.
Click to expand...
Click to collapse
Thank you. I'll try your steps.
How do you know the titanium backup becomes corrupted?
T4Ump said:
I have this problem too, do this steps.
1. Fastboot ROM
2. Update last version
3. Flash magisk_patched.boot
4. Factory reset
Done, you have root.
Click to expand...
Click to collapse
Factort reset? You mean wipe data while stuck at stock recovery? I did. Somehow my phone rooted. But I realized when I charge my phone while turning off it shows mi logo & unlocked words instead of battery icon, even after I unplug the charger. So I have to press power button to turn it on and charge normally. Do you have this problem?
syreg said:
Thank you. I'll try your steps.
How do you know the titanium backup becomes corrupted?
Click to expand...
Click to collapse
Because once I moved back to revolution OS ( I sawp of ROMs quite often ) I realized that my entire apps restored with titanium were crashing , and the few that actually open correctly didn't hold my data.
They were as if you just download them for the first time from the store.
syreg said:
Thank you. I'll try your steps.
How do you know the titanium backup becomes corrupted?
Factort reset? You mean wipe data while stuck at stock recovery? I did. Somehow my phone rooted. But I realized when I charge my phone while turning off it shows mi logo & unlocked words instead of battery icon, even after I unplug the charger. So I have to press power button to turn it on and charge normally. Do you have this problem?
Click to expand...
Click to collapse
No, i dont have this problem.
Root images updated to 19.2 magisk.
10.9.20 require wipe all data after flash patched image, this is not practical at all.
1. you stuck in this rom unless you want to wipe all data every time there is new rom.
2. Magisk bug existed in the latest global stable rom, notification prompted everytime you open Magisk to install zip, you can only ignore it or installation zip brick the phone.
10.2.26.0 root/stock
Can I use those with locked bootloader ?
Sent from my MI 9 using Tapatalk
Hey guys,
I've been installing customs without issue on my RN10.
Then one stopped booting freezing on the logo and bootloops.
Reinstalled stock with miflash and Redmi bootloops.
Tried customs again and same thing.
Any suggestions or things to try?
Worried the system_root and vendor errors are my problem.
Thanks in advance for any help or tips.
Cheers.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GEoMaNTiK said:
View attachment 5541321
Click to expand...
Click to collapse
Try flashing the super image through recovery.
faced this problem the solution for me was to flash fastboot miui eu rom
SubwayChamp said:
Try flashing the super image through recovery.
Click to expand...
Click to collapse
Tried this and didn't help, thanks for the suggestion
muneeb rizwan said:
faced this problem the solution for me was to flash fastboot miui eu rom
Click to expand...
Click to collapse
Hey there, I've tried flashing via Mi Flash and although it says success, still bootloops on Redmi logo, then eventually to fastboot.
Do you remember which fastboot miui EU rom or have a link ?
I'll try anything at this stage.. think I've killed my first Xiaomi phone.
GEoMaNTiK said:
Tried this and didn't help, thanks for the suggestion
Click to expand...
Click to collapse
Also, you can fix it flashing this ROM xiaomi.eu_multi_HMNote10_V13.0.5.0.SKGMIXM_v13-12-fastboot
SubwayChamp said:
Also, you can fix it flashing this ROM xiaomi.eu_multi_HMNote10_V13.0.5.0.SKGMIXM_v13-12-fastboot
Click to expand...
Click to collapse
Thanks for this, just tried, used the windows_fastboot_first_install_with_data_format.bat and all installed with an OKAY.
No failures or errors during install. Phone bootloops on Redmi and comes back to Mi Recovery screen.
Is there a way with OrangeFox, TWRP and any other tool to fix the file system or help?
Thanks in advance.
GEoMaNTiK said:
Thanks for this, just tried, used the windows_fastboot_first_install_with_data_format.bat and all installed with an OKAY.
No failures or errors during install. Phone bootloops on Redmi and comes back to Mi Recovery screen.
Is there a way with OrangeFox, TWRP and any other tool to fix the file system or help?
Thanks in advance.
Click to expand...
Click to collapse
same with me..but i reset data in recovery ..phone booting normal back
Now I'm getting a failed to mount (block device required) but still not able to get a custom to boot. When I try to reboot, I'm getting a system partition is empty.
Next question I have, do I have to force encryption in Orangefox or turn it off?
Also DM-Verity, should both options be off or on for customs?
GEoMaNTiK said:
Now I'm getting a failed to mount (block device required) but still not able to get a custom to boot. When I try to reboot, I'm getting a system partition is empty.
Next question I have, do I have to force encryption in Orangefox or turn it off?
Also DM-Verity, should both options be off or on for customs?
Click to expand...
Click to collapse
bro im facing the same problem you have... im using rn10sunny twrp will not mount system, and didnt flash custom roms... and if i flash stock rom then it will goes to bootloop... im also in the same condition now.....
can you please contact me on telegram @KAVIKING007 for discuss about the problem.. it will help both we are getting solutions....
GEoMaNTiK said:
Thanks for this, just tried, used the windows_fastboot_first_install_with_data_format.bat and all installed with an OKAY.
No failures or errors during install. Phone bootloops on Redmi and comes back to Mi Recovery screen.
Is there a way with OrangeFox, TWRP and any other tool to fix the file system or help?
Thanks in advance.
Click to expand...
Click to collapse
I assume you are formatting data, no? The long procedure for me was, installing AEX, I couldn't install it with TWRP (in this state), used OFR, boot to the recovery that AEX provides, format data, then boot to system, check that all is ok, enable USB debugging, now go to fastboot and flash the Miui 13.
In other device was fixed just flashing the super image (from the stock ROM) onto the super partition.
Keep the OFR settings as they are.
My theory is that some custom ROMs break the sizes on the super partition and some images are not matching.
Can you please explain about OFR because i couldn't used before....
KAVIYARASU KING said:
Can you please explain about OFR because i couldn't used before....
Click to expand...
Click to collapse
OFR Orange Fox recovery, is available in the forum.
SubwayChamp said:
OFR Orange Fox recovery, is available in the forum.
Click to expand...
Click to collapse
I tried in orangefox also but same problem occurs..... that was system could not mount.... On twrp,OFR the system partition could not be mounted... I tried all the way... But no result
KAVIYARASU KING said:
I tried in orangefox also but same problem occurs..... that was system could not mount.... On twrp,OFR the system partition could not be mounted... I tried all the way... But no result
Click to expand...
Click to collapse
Try, as pointed out in previous posts, format data with AEX recovery, then flash Miui.eu 13 through fastboot.
Also you can try flashing the super image (from the stock ROM through OFR).
And, finally, you can try using Mi Flash tool BUT in EDL mode.
All of these, assuming that you are permanently flashing the custom recovery, not only booting to it.
GEoMaNTiK said:
Thanks for this, just tried, used the windows_fastboot_first_install_with_data_format.bat and all installed with an OKAY.
No failures or errors during install. Phone bootloops on Redmi and comes back to Mi Recovery screen.
Is there a way with OrangeFox, TWRP and any other tool to fix the file system or help?
Thanks in advance.
Click to expand...
Click to collapse
You did not use the correct *.bat file for a complete cleanup. The *.bat you used will leave the original data on your phone even if it is not compatible. If you have a problem and want to install a new clean Miui system, use the flash_all.bat file (in MiFlash this is the "clean all" option)
StaryMuz said:
You did not use the correct *.bat file for a complete cleanup. The *.bat you used will leave the original data on your phone even if it is not compatible. If you have a problem and want to install a new clean Miui system, use the flash_all.bat file (in MiFlash this is the "clean all" option)
Click to expand...
Click to collapse
I had already tried MiFlash before that other rom and it's .bat file.
Just tried this with MiFlash - mojito_global_images_V12.5.2.0.RKGMIXM_20210731.0000.00_11.0_global_ce90f80766.tgz
I selected flash_all.bat. Received a success on completion of flash, used this MiFlash2018-5-28-0 (as I was receiving errors on the new MiFlash versions).
And still my phone bootloops on Redmi. This almost confirms to me this phone is lost now, nothing else I can think of.
However, will wait to see if any other suggestions here.
Thanks everyone for trying to help, much appreciated.
Don't worry yesterday night i get a new solution for these problem..... Almost we will get our device soon..... Today im gonna test few steps and its work i will give the solution dude.... So don't worry....