Huawei Mate 10 Lite (RNE-L21C185B131) Stock Firmware Backup - Huawei Mate 10 Questions & Answers

Hye everyone. I started a new thread name "Huawei Mate 10 Lite Stock Firmware Backup".
In previous days i wiped all my partitions like System,Boot,Cust,Product etc through TWRP Recovery unfortunately.
Beside this Huawei didn't release stock firmware of my device so my device didn't boot anymore and whenever i enter in the recovery mode it shows up a message on the top "no OS installed". Here i stucked badly because i had not made any backup of boot, system, product vendor etc so i took my friend's device which is also Huawei Mate 10 Lite, i unlocked its bootloader and flash TWRP Recovery and make a backup of whole OS and restore it in my device and my device successfully booted.
I also post link of backup folder of version RNE-L21C185B131.
https://drive.google.com/open?id=16soc6NiVwoV0nwlxwlSHBn6zP1-iAGbp
Also post link of TWRP Recovery Mate 10 Lite Edition which has all features enable,,,,,,,,see screenshots in attachment.
https://drive.google.com/open?id=1pOmDFqhjCOU_myrD_s5-jgrWZF7pg8nb
Now , here is the guide how to restore backup files from other phone.
1. Download the "Stock Firmware backup.zip" from given link
2. Download TWRP Recovery Mate 10 lite Edition from this link if you have not flash that one (Reply on thread if you didn't know how to flash TWRP Recovery.)
3. Now put that files extract from ZIP into external sdcard in TWRP/BACKUPS/"Your phone's Serial number"/Stock backup
4. Now insert sd card and enter into TWRP Recovery.
5. If you didn't know serial number of your phone just past it in your sdcard directory.
6. Then Go to 'Mount' section and tick all the options then go back and open 'Restore' tab and tick following option BOOT, CUST IMAGE, PRODUCT IMAGE, VENDOR IMAGE, VERSION and SYSTEM. and go ahead.
7. Wait sometime, as restoring takes couple of minutes then Reboot your Device and it is booted successfully.
Enjoy....!
Hit Thanks if its Helpful.

Hi, my friend, I have an RNE-L03, which I brick, I managed to rescue it by installing the Rom from King Mezi, but I want to go back to the original firmware, you think I can use your backup on my device?

where is screen short bro

Huawei mate 10 lite rne-l21
Same problem plzz help me...
Twrp fomate all now booting problem

plzzz call me 03008605386

Hamidmirza said:
Hye everyone. I started a new thread name "Huawei Mate 10 Lite Stock Firmware Backup".
In previous days i wiped all my partitions like System,Boot,Cust,Product etc through TWRP Recovery unfortunately.
Beside this Huawei didn't release stock firmware of my device so my device didn't boot anymore and whenever i enter in the recovery mode it shows up a message on the top "no OS installed". Here i stucked badly because i had not made any backup of boot, system, product vendor etc so i took my friend's device which is also Huawei Mate 10 Lite, i unlocked its bootloader and flash TWRP Recovery and make a backup of whole OS and restore it in my device and my device successfully booted.
I also post link of backup folder of version RNE-L21C185B131.
https://drive.google.com/open?id=16soc6NiVwoV0nwlxwlSHBn6zP1-iAGbp
Also post link of TWRP Recovery Mate 10 Lite Edition which has all features enable,,,,,,,,see screenshots in attachment.
https://drive.google.com/open?id=1pOmDFqhjCOU_myrD_s5-jgrWZF7pg8nb
Now , here is the guide how to restore backup files from other phone.
1. Download the "Stock Firmware backup.zip" from given link
2. Download TWRP Recovery Mate 10 lite Edition from this link if you have not flash that one (Reply on thread if you didn't know how to flash TWRP Recovery.)
3. Now put that files extract from ZIP into external sdcard in TWRP/BACKUPS/"Your phone's Serial number"/Stock backup
4. Now insert sd card and enter into TWRP Recovery.
5. If you didn't know serial number of your phone just past it in your sdcard directory.
6. Then Go to 'Mount' section and tick all the options then go back and open 'Restore' tab and tick following option BOOT, CUST IMAGE, PRODUCT IMAGE, VENDOR IMAGE, VERSION and SYSTEM. and go ahead.
7. Wait sometime, as restoring takes couple of minutes then Reboot your Device and it is booted successfully.
Enjoy....!
Hit Thanks if its Helpful.
Click to expand...
Click to collapse
Bravo Bravo Bravo Hamidmirza and thanks

Software contains root
how can we unroot it,thank's

thxxxxxxxxxxxxx brooooooooooooooooooo

Can this be done without twrp installed + unlocked bootloader?

KURTALANLI said:
Software contains root
how can we unroot it,thank's
Click to expand...
Click to collapse
By doing factory data reset

t1ps said:
Can this be done without twrp installed + unlocked bootloader?
Click to expand...
Click to collapse
No bro, it cant b done without twrp.
What is condition of your phone?
I mean whats your problem with your mate 10 lite.

Peligrito2010 said:
Hi, my friend, I have an RNE-L03, which I brick, I managed to rescue it by installing the Rom from King Mezi, but I want to go back to the original firmware, you think I can use your backup on my device?
Click to expand...
Click to collapse
No, this backup is only for RNE-L21 models

Veecy1986 said:
Huawei mate 10 lite rne-l21
Same problem plzz help me...
Twrp fomate all now booting problem
Click to expand...
Click to collapse
Restore given backup folder in the thread.

hi bro
hello bro when i want to restore the backup the phone say unable to wipe product after that stop the recovery
please help bro
this is the image of restoring
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

@Hamidmirza
thanks for your good contribution, I need the data partition to be able to work in RNE-L21C185, see it a browser has to be root for this
route: data / hw_init
copy it to a folder and upload it to a server to download it

Hamidmirza said:
No bro, it cant b done without twrp.
What is condition of your phone?
I mean whats your problem with your mate 10 lite.
Click to expand...
Click to collapse
So i tried relocking my mate 10 lite, but on the factory reset stage it sits at 99% for hours. I tried turning it off and on again, the factory reset went all fine but when i try to boot into the system it only boots into Erecovery.

t1ps said:
So i tried relocking my mate 10 lite, but on the factory reset stage it sits at 99% for hours. I tried turning it off and on again, the factory reset went all fine but when i try to boot into the system it only boots into Erecovery.
Click to expand...
Click to collapse
Did you factory reset your phone using stock recovery or twrp recovery?

Hamidmirza said:
Did you factory reset your phone using stock recovery or twrp recovery?
Click to expand...
Click to collapse
Before relocking, i flashed the stock recovery, so yes

t1ps said:
Before relocking, i flashed the stock recovery, so yes
Click to expand...
Click to collapse
I think you are very newest on the forum.
Relocking of bootloader is not possible even by using different softwares, it only can be relock by Huawei itself.

t1ps said:
Before relocking, i flashed the stock recovery, so yes
Click to expand...
Click to collapse
If your phone is in warranty, send back to company, they lock your phone's bootloader and install stock firmware

Related

Bricked Honor 7 (PLK-TL01H)

Hi,
I can't get out of the bootloop of my Honor 7. Here below the history:
1) Unlock bootloader: Success
2) Install TWRP: Success
3) Install SuperSU 2.65: Fail
From this point i tried to recover from a new original rom with Multi-tool, but still bootloop. I also wipe all caches but still same issues. I don't know what to do as i have the feeling i tried everything already.
If someones could help me it would be nice. I still have access to bootloader (volume - & power) and I sometimes get access to TWRP but screen freezes, i can't go into any of the settings.
Thanks for your support!
Download full rom 121 if you are in LP or 320/330 if you are in MM.
Put the rom .app file into dload folder in the SDcard
Flash stock recovery,flash the rigth rom with vol+,+,vol-,+,pwr, the flashing will start automatly.
Upgrade to 180 or 330.
The files:
http://www.modaco.com/forums/topic/...ck-rom-images-updated-1st-april-2016-plk-l01/
Flamenawer said:
Download full rom 121 if you are in LP or 320/330 if you are in MM.
Put the rom .app file into dload folder in the SDcard
Flash stock recovery,flash the rigth rom with vol+,+,vol-,+,pwr, the flashing will start automatly.
Upgrade to 180 or 330.
The files:
http://www.modaco.com/forums/topic/...ck-rom-images-updated-1st-april-2016-plk-l01/
Click to expand...
Click to collapse
That won't work sadly, PLK-L01 is totally different than PLK-TL01H in terms of software.
The updates is also named differently compared to the European version, in the EU (and elsewere?) it's 180, 320, 330 etc. but on the PLK-TL01H it's 6.3.16, 6.4.1 etc.
Hi,
indeed Flamenaver the link you post is for PLK-L01 only.
Can i use one of these firmware instead which are original ones for PLK-TL01H?
http://emui.huawei.com/cn/plugin.php?id=hwdownload&mod=detail&mid=170
How does this VOL UP + VOL DOWN + Power works exactly? Do I need the press the 3 together until i see the upgrade starting or do I relesea as soon as I see HONOR Welcome Screen ?
Because it is not working if i keep the 3 pressed until something happens, because then it is restarting and restarting for ever.
On the other side, just pressing 3 for 10 seconds and couple of seconds after it powers on doesn't work neither.
Thanks for the support.
Tabithalos said:
That won't work sadly, PLK-L01 is totally different than PLK-TL01H in terms of software.
The updates is also named differently compared to the European version, in the EU (and elsewere?) it's 180, 320, 330 etc. but on the PLK-TL01H it's 6.3.16, 6.4.1 etc.
Click to expand...
Click to collapse
Try to install LP or MM full rom (no ota o zip roms),from stock recovery, with the standard process for your phone, is a universal unbrick procedure for soft_bricked phones.
I can't get access to stock recovery. I can reinstall Stock recovery from Honor Multi Tools but i can't get in it.
If i keep vol+ & Power or Vol+, Vol- & Power pressed i get onl the honor welcome screen bootloop, nothing else
Hi, I got into this mode in the end. Is this the Force update mode?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It was not easy to get in. Keep you informed in a couple of seconds what the results are.
Thanks
Tried twice already and always stuck at 90%...
sebastien_be said:
Tried twice already and always stuck at 90%...
Click to expand...
Click to collapse
If it's stuck at 90% it's not working, believe me, I've had the same problem, I tried to update SuperSU and it bricked. Had to factory reset it and update the phone to the newest version which currently is 6.4.1, THEN go through the process of installing TWRP, SuperSU etc.
If you can't get the updates via the "Updater" option in the options, try to manually downgrade/upgrade it and see if it appears. You have to do some fancy google-translate to chinese to find the update packages on chinese forums.
Why U don't try the Honor 7 Multitool and the huawei update extractor combo???
That must be work!
Hi,
this is the latest status: https://youtu.be/QsPOg4lKkSc
I'm already using Multi-Tools and extracted a PLK-TL01H stock rom. I then used the unbrick option in multi-tools and restores this stock rom. But even though it starts fine, i can enter my pin code but when the language screens comes in, it makes a weird noise and reboots.
I then went into TWRP which works fine and could wipe cache and wipe dalvik cache. But I'm still stuck with welcome crash.
Any idea what to do? As reminder:
1) Bootloader is unlocked
2) Bootloader screen works fine (fastboot works but adb doesn't)
3) TWRP screen also works fine.
Thank you!
Did you try with an older or an other stock rom?
Yes I tried these two versions;
PLK-TL01H-C01B201
PLK-UL-TL-CL_EMUI3.1_Android5.1_5.12.1
Actually this version: PLK-TL01H-C01B201 works fine but only without sim card and SD card. If one of these is inside then i get automated reboot after entering pin code. But if i reboot without these two, then the phone works fine (i can get access to wifi, menu, and so on...).
WEIRD!
Hi,
My Honor 7 is still bricked and i can't get out of it. I tried to unbrick by flashing the following files from a stock rom:
fastboot flash boot .\Unbrick\BOOT.img
fastboot flash cust .\Unbrick\CUST.img
fastboot flash recovery .\Unbrick\RECOVERY.img
fastboot flash system .\Unbrick\SYSTEM.img
The flash of these 4 files works fine. I then get the welcome screen where i can choose the language, HiCloud settings and so on. As long as i do not get out of the flight mode it seems to be stable. But when i enter the pin code of my simcard (amongst others), then i get a crash and reboot.
So i have the feeling that there are still some conflicts. In the stock rom there are many other IMG files. Shouldn't I also flash them? I have the following IMG files: 3RDMODEM, CACHE, CRC, CURVER, DTIMAGE, EFI, FASTBOOT, MODEM, etc etc.
I have the feeling that if i flash them all, then it might work fine. But all files do not have a specific partition, so i don't know how to flash them.
Thanks for the support!
sebastien_be said:
Hi,
My Honor 7 is still bricked and i can't get out of it. I tried to unbrick by flashing the following files from a stock rom:
fastboot flash boot .\Unbrick\BOOT.img
fastboot flash cust .\Unbrick\CUST.img
fastboot flash recovery .\Unbrick\RECOVERY.img
fastboot flash system .\Unbrick\SYSTEM.img
The flash of these 4 files works fine. I then get the welcome screen where i can choose the language, HiCloud settings and so on. As long as i do not get out of the flight mode it seems to be stable. But when i enter the pin code of my simcard (amongst others), then i get a crash and reboot.
So i have the feeling that there are still some conflicts. In the stock rom there are many other IMG files. Shouldn't I also flash them? I have the following IMG files: 3RDMODEM, CACHE, CRC, CURVER, DTIMAGE, EFI, FASTBOOT, MODEM, etc etc.
I have the feeling that if i flash them all, then it might work fine. But all files do not have a specific partition, so i don't know how to flash them.
Thanks for the support!
Click to expand...
Click to collapse
The main problem that you were on MM version (6.3.16-DEV edition of ROM, no official update) of ROM and you're trying to flash Lollipop (B201, 5.12.1). It means that your problems are probably caused by this. Try to flash 5.12.16 then OTA update to 6.1.1 (using WiFi if possible) and then rollback from Emui 4 to Emui 3.1 if you want use Emui 3.1 and Lollipop. it's up to you. It's possible that your will be able to use SIM card when you would update to 6.1.1 (MM)
Sent from PLK-TL01H
SOLVED!
Thank you Lucki_X and Inside!Out ! Indeed i was trying to flash with Android 5.0 while i was already on Android 6.
Consequently I used the unbrick option from Multi-tools by using this version PLK-TL01H_EMUI4.0_Android6.0_6.2.1(B634).zip
Now everything works fine. Can anyone tell me how to install SuperSU? Because it is due to installation of SuperSU through TWRP that it caused the crash. I installed SuperSU 2.65 BETA.
How to do and which version to install to avoid bootloop?
Thanks very much,
Sebastien.
Hi All,
any idea why i now only have 3,87GB available as internal storage?
sebastien_be said:
Hi All,
any idea why i now only have 3,87GB available as internal storage?
Click to expand...
Click to collapse
Probably because you have multiple ghost systems as a result of previous still in memory. Factory reset will help.
Thank you! This is also solved now (Factory reset in TWRP + Calvik & Cache Wipes)!
Last question: Any advice on how to install SuperSU? Because by trying to install 2.65 BETA it caused the bootloop earlier.
Is there any version to propose instead of another one?
Thanks,
To answer my question: There is only the v2.62 that is working with Honor7 ! I Tried 2.49 and 2.65 both creates startup bootloop. Hopefully this time i got a full backup made in TWRP, was pretty easy to comeback to a working version.
i have a similiar brick as you. Flashed from B201 to B352 via the OTA. Had a boodloop, tried to erase cache and factory reset.
Tried to unbrick my phone with multi tool (first with the B201 udpate.app - now with B634 update.app). Now i'm in a bootloop again. What can I do?
EDIT: I'm in the ROM now, but can't enable my SIM card and WIFI is also not working
What can i do?

Issue with getting back to stock

I was on Marshmallow beta for L22. Then i decided give Resurrection Remix rom a try. I installed it. But then by mistake i restored stock back up of 130 (Lollipop). Also i don;t have the back up of marshmallow beta now.
Now, whenever i try to flash 150 (Lollipop) version from fastboot (boot, recovery, system) the phone boots, but it doesn't display any fingerprint option or the model number is not displayed under settings.
I have even tried putting dload folder inside sd card. When i reboot to install it, the installation starts, but aborts immediately without any error. Then it displays just a shutdown device button. Can someone please help me get rid of this problem.
mani0608 said:
I was on Marshmallow beta for L22. Then i decided give Resurrection Remix rom a try. I installed it. But then by mistake i restored stock back up of 130 (Lollipop). Also i don;t have the back up of marshmallow beta now.
Now, whenever i try to flash 150 (Lollipop) version from fastboot (boot, recovery, system) the phone boots, but it doesn't display any fingerprint option or the model number is not displayed under settings.
I have even tried putting dload folder inside sd card. When i reboot to install it, the installation starts, but aborts immediately without any error. Then it displays just a shutdown device button. Can someone please help me get rid of this problem.
Click to expand...
Click to collapse
Did you try this >> http://forum.xda-developers.com/honor-5x/how-to/l22-captured-t3362123
Flash stock recovery first
clsA said:
Did you try this >> http://forum.xda-developers.com/honor-5x/how-to/l22-captured-t3362123
Flash stock recovery first
Click to expand...
Click to collapse
I will try that and post the updates. Thanks for sharing it.
clsA said:
Did you try this >> http://forum.xda-developers.com/honor-5x/how-to/l22-captured-t3362123
Flash stock recovery first
Click to expand...
Click to collapse
Dude that doesn't work
mani0608 said:
Dude that doesn't work
Click to expand...
Click to collapse
do you have stock recovery ?
did you factory reset from stock recovery ?
is your sdcard fat32 and the file in the dload folder
did you reboot with power + volume up + volume down ?
clsA said:
do you have stock recovery ?
did you factory reset from stock recovery ?
is your sdcard fat32 and the file in the dload folder
did you reboot with power + volume up + volume down ?
Click to expand...
Click to collapse
Yes i have stock recovery. I did factory reset and i even tried fastboot erase system and flash everything again (System, Boot, Recovery etc). But nothing worked.
The dload folder is in internal storage. I tried power + volume up + volume down with update.app but the installation aborted. I am going to post a screenshot of my settings > about device screen now. Looks like something is corrupted.
mani0608 said:
Yes i have stock recovery. I did factory reset and i even tried fastboot erase system and flash everything again (System, Boot, Recovery etc). But nothing worked.
The dload folder is in internal storage. I tried power + volume up + volume down with update.app but the installation aborted. I am going to post a screenshot of my settings > about device screen now. Looks like something is corrupted.
Click to expand...
Click to collapse
one of these files should work
http://forum.xda-developers.com/honor-5x/how-to/stock-roms-links-t3387899
clsA said:
one of these files should work
http://forum.xda-developers.com/honor-5x/how-to/stock-roms-links-t3387899
Click to expand...
Click to collapse
I have the same stock zip files (150) download from HiHonor. It is what i was trying to flash initially. I have an unlocked bootloader. But still it doesn't work for some reason.
mani0608 said:
I have the same stock zip files (150) download from HiHonor. It is what i was trying to flash initially. I have an unlocked bootloader. But still it doesn't work for some reason.
Click to expand...
Click to collapse
try the b130 first then the b150
be sure the stock recovery matches the version your flashing
mani0608 said:
I have the same stock zip files (150) download from HiHonor. It is what i was trying to flash initially. I have an unlocked bootloader. But still it doesn't work for some reason.
Click to expand...
Click to collapse
This is what my about phone screen now looks like. My phone just boots but it looks like a complete dummy OS like nothing was loaded properly.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is how the home screen looks after boot
clsA said:
try the b130 first then the b150
be sure the stock recovery matches the version your flashing
Click to expand...
Click to collapse
I tried this bro. But when i press (Vol down + vol up + power button) it does to the recovery for installing but stops at 0%. I waited the whole night. But it didn't progress.
mani0608 said:
I tried this bro. But when i press (Vol down + vol up + power button) it does to the recovery for installing but stops at 0%. I waited the whole night. But it didn't progress.
Click to expand...
Click to collapse
well that stinks, only thing else you can do is ask for a TWRP backup from KIW-L22 B150 and include everything in the new TWRP
and restore all the partitions except oeminfo (that one contains your phones serial number)
maybe @gopinaidu77 can post one for you.
clsA said:
well that stinks, only thing else you can do is ask for a TWRP backup from KIW-L22 B150 and include everything in the new TWRP
and restore all the partitions except oeminfo (that one contains your phones serial number)
maybe @gopinaidu77 can post one for you.
Click to expand...
Click to collapse
Its going to stink more...
I already have a TWRP backup of 130 which was shared by @gopinaidu77. I even tried that and it doesn't help. I am at work now. I will try everything again after reaching home and keep you posted.
clsA said:
well that stinks, only thing else you can do is ask for a TWRP backup from KIW-L22 B150 and include everything in the new TWRP
and restore all the partitions except oeminfo (that one contains your phones serial number)
maybe @gopinaidu77 can post one for you.
Click to expand...
Click to collapse
My total internal memory shows only 10GB and free is 9.5 GB. That's ridiculous.
I couldn't fix it. So i am currently using RR Rom. Its really good. Thank you @clsA for the inputs.

Bricked KIW-L21?

Hi guys
I have some trouble with my KIW-L21, I am sorry that I can't say for sure how I ended up in this situation since it is long time ago and i can't really remember... and i just now devided to see if I could fix this phone or not since it has just been lying around.
Phone is unlocked and I had rooted ROM and TWRP installed on it.
Searched forum for many fixes without good result.
Diagnosis:
When I boot phone it is just standing with the Honor boot screen until battery runs out.
I can access bootloader
The only recovery I can access seems to be some sort of "huawei E-recovery"
Fixes tried.
I have tried the follow fixes without any good result.
*Flashing TWRP and recover from a downloaded backup
For some strange reason, even though fastboot says successfull flash when i flash TWRP, I keep coming back to this Huawei recovery. hence i can't recovery from downloaded backup (or install any ROM for that matter)
*UPDATE.APP in dload folder on SDcard
When I try this option it seems to start the update/installation, but after a second or so some text flash on the screen (too fast to read) and i get message that the update failed.
*Recover via HIsuite
I enter bootloader/fastboot mode and HIsuits system recovery function. But as soon as i press RECOVER i get an error message.
*Reset via Huawei e-recovery
When I enter this Huawei recovery i get the option to install and recovery via wifi, but just as the other functions it says that the process failed and i am back to square one.
*Install "stuff" via fastboot
Saw this guide for flashing the UPDATE..APP via fastboot, but it says "Command not allowed" when flashing CUST.img
Don't know if I am stupid and missing the obvious solution here? But I have tried basically every guide on this forum without success. So any help possible would be greatly appreciated.
I am well aware that some of these functions requires the Huawei recovery and not TWRP, so I have flashed this recovery also. But since adb/fastboot says "SUCESS" when i flash TWRP but it still doesn't show up I have no clue if the Huawei recovery I am flashing is really flashed or not.
Champman said:
Hi guys
I have some trouble with my KIW-L21, I am sorry that I can't say for sure how I ended up in this situation since it is long time ago and i can't really remember... and i just now devided to see if I could fix this phone or not since it has just been lying around.
Phone is unlocked and I had rooted ROM and TWRP installed on it.
Searched forum for many fixes without good result.
Diagnosis:
When I boot phone it is just standing with the Honor boot screen until battery runs out.
I can access bootloader
The only recovery I can access seems to be some sort of "huawei E-recovery"
Fixes tried.
I have tried the follow fixes without any good result.
*Flashing TWRP and recover from a downloaded backup
For some strange reason, even though fastboot says successfull flash when i flash TWRP, I keep coming back to this Huawei recovery. hence i can't recovery from downloaded backup (or install any ROM for that matter)
*UPDATE.APP in dload folder on SDcard
When I try this option it seems to start the update/installation, but after a second or so some text flash on the screen (too fast to read) and i get message that the update failed.
*Recover via HIsuite
I enter bootloader/fastboot mode and HIsuits system recovery function. But as soon as i press RECOVER i get an error message.
*Reset via Huawei e-recovery
When I enter this Huawei recovery i get the option to install and recovery via wifi, but just as the other functions it says that the process failed and i am back to square one.
*Install "stuff" via fastboot
Saw this guide for flashing the UPDATE..APP via fastboot, but it says "Command not allowed" when flashing CUST.img
Don't know if I am stupid and missing the obvious solution here? But I have tried basically every guide on this forum without success. So any help possible would be greatly appreciated.
I am well aware that some of these functions requires the Huawei recovery and not TWRP, so I have flashed this recovery also. But since adb/fastboot says "SUCESS" when i flash TWRP but it still doesn't show up I have no clue if the Huawei recovery I am flashing is really flashed or not.
Click to expand...
Click to collapse
Try fastboot boot recovery.img
While twrp=recovery.img
If you use the newer versions of Twrp you can
Install/image and choose cust,system,data,tz ...etc
Sent from my SM-N930F using Tapatalk
Sweet!
Thanks for pointing out something so obvious
I can now access TWRP atleast.
Will try to see what I can do now. This atleast opens a whole new world of options! :good:
You are in the same position as i was. Download that file extract it and put the update.app file on your SDcard in a folder named dload. Boot your device with (volume down + power) until the process starts. You will return to stock B140 from there you can do what ever you want. Only works if you are from West Europe.
Download: http://www.hihonor.com/nl/support/details/?DOC_ID=84203
yeah, KIW-L21 is not the full model number, it could be KIW-L21C432, KIW-L21C185, and maybe other as well, so be careful, and always mention your full model number.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Champman said:
Hi guys
I have some trouble with my KIW-L21, I am sorry that I can't say for sure how I ended up in this situation since it is long time ago and i can't really remember... and i just now devided to see if I could fix this phone or not since it has just been lying around.
Phone is unlocked and I had rooted ROM and TWRP installed on it.
Searched forum for many fixes without good result.
Diagnosis:
When I boot phone it is just standing with the Honor boot screen until battery runs out.
I can access bootloader
The only recovery I can access seems to be some sort of "huawei E-recovery"
Fixes tried.
I have tried the follow fixes without any good result.
*Flashing TWRP and recover from a downloaded backup
For some strange reason, even though fastboot says successfull flash when i flash TWRP, I keep coming back to this Huawei recovery. hence i can't recovery from downloaded backup (or install any ROM for that matter)
*UPDATE.APP in dload folder on SDcard
When I try this option it seems to start the update/installation, but after a second or so some text flash on the screen (too fast to read) and i get message that the update failed.
*Recover via HIsuite
I enter bootloader/fastboot mode and HIsuits system recovery function. But as soon as i press RECOVER i get an error message.
*Reset via Huawei e-recovery
When I enter this Huawei recovery i get the option to install and recovery via wifi, but just as the other functions it says that the process failed and i am back to square one.
*Install "stuff" via fastboot
Saw this guide for flashing the UPDATE..APP via fastboot, but it says "Command not allowed" when flashing CUST.img
Don't know if I am stupid and missing the obvious solution here? But I have tried basically every guide on this forum without success. So any help possible would be greatly appreciated.
I am well aware that some of these functions requires the Huawei recovery and not TWRP, so I have flashed this recovery also. But since adb/fastboot says "SUCESS" when i flash TWRP but it still doesn't show up I have no clue if the Huawei recovery I am flashing is really flashed or not.
Click to expand...
Click to collapse
I had this same error too. what worked for me was: fastboot boot recovery [Your recovery name here.img] it temporarily loads the recovery you want to load without installing it or any hassle.
Cheers:good:
Edit: i just saw this was already a answer. Sorry
Follow what demiam posted and you're good to go

[Root images] Boot 10.2.24.0 & 10.2.9.0 & 10.2.26.0

Version 10.2.26.0
Version 10.2.24.0 ------------ > Stock/Root
Version 10.2.9.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
T4Ump said:
Version 10.2.24.0 - Link
Click to expand...
Click to collapse
so what do we do with this? fastboot it? is it like a full rom with magisk, rooted? cheers
vtec303 said:
so what do we do with this? fastboot it? is it like a full rom with magisk, rooted? cheers
Click to expand...
Click to collapse
Fastboot flash boot.img
It's only magisk for 10.2.24
You can create your own if you want, it's just 30s faster
Code:
fastboot flash boot boot.img
Thank you so much for posting this. I'd been trying for 2 days with twrp and magisk (19.1 and 19.2) and could never get past the recovery bootloop on my Mi 9.
Are you on global stable?
I am having boot loop too.
So far I haven't seen any root for 10.2.9.0
Does anyone have boot.img V10.2.9.0.PFAMIXM? I wanna try root, but only need that file
xxx
T4Ump said:
xxx
Click to expand...
Click to collapse
Hi, thanks for the patched one. Do you still have the stock one? My phone stuck at recovery mode
Edited: nvm. I'll download the fastboot ROM. Thank you anyway.
realm9thfeb said:
Are you on global stable?
I am having boot loop too.
So far I haven't seen any root for 10.2.9.0
Click to expand...
Click to collapse
I don't get it, what are you trying to achieve? Keep encryption and have root access?
Right now i'm on 10.2.9.0 running perfectly fine with root (magisk 19.1) but no encryption.
PriPhaze said:
I don't get it, what are you trying to achieve? Keep encryption and have root access?
Right now i'm on 10.2.9.0 running perfectly fine with root (magisk 19.1) but no encryption.
Click to expand...
Click to collapse
Hi, could you tell me how you root your phone? I installed magisk manager, chose boot.img then got magisk_patched.img. I flashed it via fastboot flash boot magisk_patched.img but I got stuck at stock recovery after rebooting. Did I miss any step?
syreg said:
Hi, could you tell me how you root your phone? I installed magisk manager, chose boot.img then got magisk_patched.img. I flashed it via fastboot flash boot magisk_patched.img but I got stuck at stock recovery after rebooting. Did I miss any step?
Click to expand...
Click to collapse
What i did was:
-Flash Stock Global ROM with Xiaomi Flash making sure to set the bat as clean all and NOT clean and lock!
-Once done it will automatically boot , and when it does simply reboot and hold down vol to go to the fastboot
-Flash Recovery img using minimal adb and fastboot
-Type "Fastboot reboot" and hold vol up to go to twrp
-In TWRP FORMAT data to get ride off encryption and reboot into recovery
-Again in TWRP now u can transfer files to the phone, so i patched "Disable_Dm-Verity_ForceEncrypt" and then patched Magisk 19.1
-That's it.
You can now reboot and it will start the phone configuration as normal but once you configure everything u will see that magisk is there and fully works.
Just one thing tho.... be careful if u will restore titanium back up apps...
Don't get me wrong; they do restore correctly but when you make a backup it becomes corrupted or at least that's what happened to me, so make sure to keep backups PRIOR to using the ROM saved in your PC or something.
EDIT: Maybe u should give a try to this twrp https://forum.xda-developers.com/Mi-9/development/recovery-unofficial-twrp-xiaomi-mi-9-t3905825, just got updated few hrs ago and so far seems it works really good.
syreg said:
Hi, could you tell me how you root your phone? I installed magisk manager, chose boot.img then got magisk_patched.img. I flashed it via fastboot flash boot magisk_patched.img but I got stuck at stock recovery after rebooting. Did I miss any step?
Click to expand...
Click to collapse
I have this problem too, do this steps.
1. Fastboot ROM
2. Update last version
3. Flash magisk_patched.boot
4. Factory reset
Done, you have root.
PriPhaze said:
What i did was:
-Flash Stock Global ROM with Xiaomi Flash making sure to set the bat as clean all and NOT clean and lock!
-Once done it will automatically boot , and when it does simply reboot and hold down vol to go to the fastboot
-Flash Recovery img using minimal adb and fastboot
-Type "Fastboot reboot" and hold vol up to go to twrp
-In TWRP FORMAT data to get ride off encryption and reboot into recovery
-Again in TWRP now u can transfer files to the phone, so i patched "Disable_Dm-Verity_ForceEncrypt" and then patched Magisk 19.1
-That's it.
You can now reboot and it will start the phone configuration as normal but once you configure everything u will see that magisk is there and fully works.
Just one thing tho.... be careful if u will restore titanium back up apps...
Don't get me wrong; they do restore correctly but when you make a backup it becomes corrupted or at least that's what happened to me, so make sure to keep backups PRIOR to using the ROM saved in your PC or something.
EDIT: Maybe u should give a try to this twrp https://forum.xda-developers.com/Mi-9/development/recovery-unofficial-twrp-xiaomi-mi-9-t3905825, just got updated few hrs ago and so far seems it works really good.
Click to expand...
Click to collapse
Thank you. I'll try your steps.
How do you know the titanium backup becomes corrupted?
T4Ump said:
I have this problem too, do this steps.
1. Fastboot ROM
2. Update last version
3. Flash magisk_patched.boot
4. Factory reset
Done, you have root.
Click to expand...
Click to collapse
Factort reset? You mean wipe data while stuck at stock recovery? I did. Somehow my phone rooted. But I realized when I charge my phone while turning off it shows mi logo & unlocked words instead of battery icon, even after I unplug the charger. So I have to press power button to turn it on and charge normally. Do you have this problem?
syreg said:
Thank you. I'll try your steps.
How do you know the titanium backup becomes corrupted?
Click to expand...
Click to collapse
Because once I moved back to revolution OS ( I sawp of ROMs quite often ) I realized that my entire apps restored with titanium were crashing , and the few that actually open correctly didn't hold my data.
They were as if you just download them for the first time from the store.
syreg said:
Thank you. I'll try your steps.
How do you know the titanium backup becomes corrupted?
Factort reset? You mean wipe data while stuck at stock recovery? I did. Somehow my phone rooted. But I realized when I charge my phone while turning off it shows mi logo & unlocked words instead of battery icon, even after I unplug the charger. So I have to press power button to turn it on and charge normally. Do you have this problem?
Click to expand...
Click to collapse
No, i dont have this problem.
Root images updated to 19.2 magisk.
10.9.20 require wipe all data after flash patched image, this is not practical at all.
1. you stuck in this rom unless you want to wipe all data every time there is new rom.
2. Magisk bug existed in the latest global stable rom, notification prompted everytime you open Magisk to install zip, you can only ignore it or installation zip brick the phone.
10.2.26.0 root/stock
Can I use those with locked bootloader ?
Sent from my MI 9 using Tapatalk

[RECOVERY][3.5.A10-TWRP]Unnoficial for (GAUGUIN) Xiaomi Mi10T Lite, Mi10i, Redmi Note 9 Pro 5G (BETA)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
We are not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you.
WORKING:​
Decryption userdata with eu roms
Screen brightness settings
Correct screenshot color
MTP
ADB
Vibration
Sideload
To flash the Twrp​Download the recovery and copy to adb folder
Open terminal
Code:
fastboot flash recovery nameofrecovery.img
fastboot boot nameofrecovery.img
or
fastboot reboot with vol + to boot
Source Code​https://github.com/geoanto555/android_device_xiaomi_gauguin
https://github.com/TeamWin/android_bootable_recovery
Prebuilt Stock Kernel
Thanks to ​TeamWin Recovery Project
all testers and developers
Thanks to Μιχάλης (chariPower) for the information(sideload)
Download Link-s​twrp_gauguin_3.5.A10_05-01-2021
twrp_gauguin_3.5.A10_07-02-2021 fixed sideload and mtp
twrp_gauguin_3.5.A10_18-02-2021 fixed backup data error 255 (/data/extm)
twrp_gauguin_3.5.A10_05-03-2021 Fixed Mtp after format data & reboot recovery. (if the MTP does not open, try reboot in twrp again)
twrp_gauguin_3.5.1.A10_30-03-2021 fixed fastbootd
it’s first time i am using xiaomi phone. my device is RMN9P5G and waiting for unlocked. can i flash your recovery and install the latest stable EU rom in mifirm.net: V12.0.8.0.QJSCNXM immediately after unlock success?i’m worry a bit because some members report that internal, user data be encrypted and cannot access..
kien_vip said:
it’s first time i am using xiaomi phone. my device is RMN9P5G and waiting for unlocked. can i flash your recovery and install the latest stable EU rom in mifirm.net: V12.0.8.0.QJSCNXM immediately after unlock success?i’m worry a bit because some members report that internal, user data be encrypted and cannot access..
Click to expand...
Click to collapse
From my experience, the recovery cannot decrypt the stock ROMs, you have to flash a custom ROM (Arrow and Lineage are the only 2 right now), or flash a xiaomi EU ROM.
Copy the rom to sdcard or usb otg.
Format data
Reboot recovery
Flash rom.
With xiaomi eu decryption works...
Decryption on stock rom works if I hotboot TWRP (fastboot boot twrp.img). If I flash it, TWRP doesn't prompt me for a password when started and keeps data encrypted.
Hi there, thank you for the TWRP. Is there any chance to decrypt also user 999 for the Dual apps on the .eu ROMs?
not for now. I will upload new version soon
ilyachelsea said:
Is there any chance to decrypt also user 999 for the Dual apps on the .eu ROMs?
Click to expand...
Click to collapse
twrp_gauguin_MI10TL-RN9P5G_MI10I_3.5.A10_18-02-2021_BL-L
Fixed backup userdata (error 255 for data/extm)
User 999 can be decrypted only with default password ( without pattern-pin-pass) for now.
Thank you, but my password is PIN, anyway the recent twrp can't decrypt user 999. It is the message in red: "Failed decrypt user 999"
Only without pin,pass,pattern can be decrypted user999
It's a pity. I intend to back up also user 999 to keep my dual banking apps with the access data. If I first remove the PIN, and backup user 999 with the TWRP, after restore I will have to set up access again. This kills the benefit of the decryption and makes backup of 999 useless.
Thank you anyway and I hope, NO PIN is the temporary requirement of this version.
Hello everybody! Last week I unlocked the bootloader of my gauguin and initially I tried the official TWRP Recovery released by TWRP official page but it didn't work correctly and I couldn't flash zips, so I tried this beta version released by geoanto555 and it worked smoothly, I flashed zips and I had root permissions... But last night the smartphone had the battery low and it turned off, when I connected it to the charger it automatically reboot in fastboot and I can only enter in recovery mode. Sorry but I'm new in the modding world and I don't know what to do.. First brick.. What I did wrong? Anybody can help me? Is there anything I can do or I have to buy a new phone? Thanks to who will answer . Good evening.
devedel said:
Hello everybody! Last week I unlocked the bootloader of my gauguin and initially I tried the official TWRP Recovery released by TWRP official page but it didn't work correctly and I couldn't flash zips, so I tried this beta version released by geoanto555 and it worked smoothly, I flashed zips and I had root permissions... But last night the smartphone had the battery low and it turned off, when I connected it to the charger it automatically reboot in fastboot and I can only enter in recovery mode. Sorry but I'm new in the modding world and I don't know what to do.. First brick.. What I did wrong? Anybody can help me? Is there anything I can do or I have to buy a new phone? Thanks to who will answer . Good evening.
Click to expand...
Click to collapse
If you have access to the recovery, or fastboot, you can flash the original firmware with fastboot, but watch out, for some reason, when i flash the original rom from Windows using fastboot, it crashes, but with Linux it just works
AnibalSP said:
If you have access to the recovery, or fastboot, you can flash the original firmware with fastboot, but watch out, for some reason, when i flash the original rom from Windows using fastboot, it crashes, but with Linux it just works
Click to expand...
Click to collapse
In my device the rom is still the original. Do I have to do it anyway? What can happen if I try to flash a custom rom? If I only do the factory reset will I lose also TWRP?
AnibalSP said:
If you have access to the recovery, or fastboot, you can flash the original firmware with fastboot, but watch out, for some reason, when i flash the original rom from Windows using fastboot, it crashes, but with Linux it just works
Click to expand...
Click to collapse
I'm trying to do this with XiaoMiTool v2.. Thanks
devedel said:
In my device the rom is still the original. Do I have to do it anyway? What can happen if I try to flash a custom rom? If I only do the factory reset will I lose also TWRP?
Click to expand...
Click to collapse
If you can boot to android, or boot to TWRP / Orangefox, you don't need to flash again miui stock
If you flash a second rom, the worst thing that can happen, is that the rom may not work, but you wipe the internal memory (dalvik cache and data) and it should be running again
If you loose twrp for some reason, you can flash it again with xiaomitoolv2, or with fastboot
I'd recommend to you to try rooting, installing roms and similars things in an old phone if you don't are confident / know what are you doing, you will learn a lot in a few days of tinkering.
Anyone know what I need? I can't finish the installation of a official xiaomi rom to unbrick my device
devedel said:
View attachment 5257349
Anyone know what I need? I can't finish the installation of a official xiaomi rom to unbrick my device
Click to expand...
Click to collapse
Hi,
Download the official stock rom
Dont use XiaoMiToolV2, instead use MiFlash (official tool). Works for me every time. Then connect your phone in fastboot and flash all, I use the clean all and lock option which relocks my bootloader but you could just clean all and leave the bootloader unlocked. Then you can start again
fizzy900 said:
Hi,
Download the official stock rom
Dont use XiaoMiToolV2, instead use MiFlash (official tool). Works for me every time. Then connect your phone in fastboot and flash all, I use the clean all and lock option which relocks my bootloader but you could just clean all and leave the bootloader unlocked. Then you can start again
Click to expand...
Click to collapse
Hi, thanks for your advice.
Do you think it can works if usb debugging is off? I'm afraid I've disabled it the night the phone bricked.
I did wrong too many things but was my first try, tomorrow I'll buy a new Mi 10t lite and I'll try again, using more precautions.
Thank you all anyway, good evening.
devedel said:
Hi, thanks for your advice.
Do you think it can works if usb debugging is off? I'm afraid I've disabled it the night the phone bricked.
I did wrong too many things but was my first try, tomorrow I'll buy a new Mi 10t lite and I'll try again, using more precautions.
Thank you all anyway, good evening.
Click to expand...
Click to collapse
Enabled debugging is needed for adb when the system is running. For fastboot it does not matter.

Categories

Resources