Related
Hi,
I can't get out of the bootloop of my Honor 7. Here below the history:
1) Unlock bootloader: Success
2) Install TWRP: Success
3) Install SuperSU 2.65: Fail
From this point i tried to recover from a new original rom with Multi-tool, but still bootloop. I also wipe all caches but still same issues. I don't know what to do as i have the feeling i tried everything already.
If someones could help me it would be nice. I still have access to bootloader (volume - & power) and I sometimes get access to TWRP but screen freezes, i can't go into any of the settings.
Thanks for your support!
Download full rom 121 if you are in LP or 320/330 if you are in MM.
Put the rom .app file into dload folder in the SDcard
Flash stock recovery,flash the rigth rom with vol+,+,vol-,+,pwr, the flashing will start automatly.
Upgrade to 180 or 330.
The files:
http://www.modaco.com/forums/topic/...ck-rom-images-updated-1st-april-2016-plk-l01/
Flamenawer said:
Download full rom 121 if you are in LP or 320/330 if you are in MM.
Put the rom .app file into dload folder in the SDcard
Flash stock recovery,flash the rigth rom with vol+,+,vol-,+,pwr, the flashing will start automatly.
Upgrade to 180 or 330.
The files:
http://www.modaco.com/forums/topic/...ck-rom-images-updated-1st-april-2016-plk-l01/
Click to expand...
Click to collapse
That won't work sadly, PLK-L01 is totally different than PLK-TL01H in terms of software.
The updates is also named differently compared to the European version, in the EU (and elsewere?) it's 180, 320, 330 etc. but on the PLK-TL01H it's 6.3.16, 6.4.1 etc.
Hi,
indeed Flamenaver the link you post is for PLK-L01 only.
Can i use one of these firmware instead which are original ones for PLK-TL01H?
http://emui.huawei.com/cn/plugin.php?id=hwdownload&mod=detail&mid=170
How does this VOL UP + VOL DOWN + Power works exactly? Do I need the press the 3 together until i see the upgrade starting or do I relesea as soon as I see HONOR Welcome Screen ?
Because it is not working if i keep the 3 pressed until something happens, because then it is restarting and restarting for ever.
On the other side, just pressing 3 for 10 seconds and couple of seconds after it powers on doesn't work neither.
Thanks for the support.
Tabithalos said:
That won't work sadly, PLK-L01 is totally different than PLK-TL01H in terms of software.
The updates is also named differently compared to the European version, in the EU (and elsewere?) it's 180, 320, 330 etc. but on the PLK-TL01H it's 6.3.16, 6.4.1 etc.
Click to expand...
Click to collapse
Try to install LP or MM full rom (no ota o zip roms),from stock recovery, with the standard process for your phone, is a universal unbrick procedure for soft_bricked phones.
I can't get access to stock recovery. I can reinstall Stock recovery from Honor Multi Tools but i can't get in it.
If i keep vol+ & Power or Vol+, Vol- & Power pressed i get onl the honor welcome screen bootloop, nothing else
Hi, I got into this mode in the end. Is this the Force update mode?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It was not easy to get in. Keep you informed in a couple of seconds what the results are.
Thanks
Tried twice already and always stuck at 90%...
sebastien_be said:
Tried twice already and always stuck at 90%...
Click to expand...
Click to collapse
If it's stuck at 90% it's not working, believe me, I've had the same problem, I tried to update SuperSU and it bricked. Had to factory reset it and update the phone to the newest version which currently is 6.4.1, THEN go through the process of installing TWRP, SuperSU etc.
If you can't get the updates via the "Updater" option in the options, try to manually downgrade/upgrade it and see if it appears. You have to do some fancy google-translate to chinese to find the update packages on chinese forums.
Why U don't try the Honor 7 Multitool and the huawei update extractor combo???
That must be work!
Hi,
this is the latest status: https://youtu.be/QsPOg4lKkSc
I'm already using Multi-Tools and extracted a PLK-TL01H stock rom. I then used the unbrick option in multi-tools and restores this stock rom. But even though it starts fine, i can enter my pin code but when the language screens comes in, it makes a weird noise and reboots.
I then went into TWRP which works fine and could wipe cache and wipe dalvik cache. But I'm still stuck with welcome crash.
Any idea what to do? As reminder:
1) Bootloader is unlocked
2) Bootloader screen works fine (fastboot works but adb doesn't)
3) TWRP screen also works fine.
Thank you!
Did you try with an older or an other stock rom?
Yes I tried these two versions;
PLK-TL01H-C01B201
PLK-UL-TL-CL_EMUI3.1_Android5.1_5.12.1
Actually this version: PLK-TL01H-C01B201 works fine but only without sim card and SD card. If one of these is inside then i get automated reboot after entering pin code. But if i reboot without these two, then the phone works fine (i can get access to wifi, menu, and so on...).
WEIRD!
Hi,
My Honor 7 is still bricked and i can't get out of it. I tried to unbrick by flashing the following files from a stock rom:
fastboot flash boot .\Unbrick\BOOT.img
fastboot flash cust .\Unbrick\CUST.img
fastboot flash recovery .\Unbrick\RECOVERY.img
fastboot flash system .\Unbrick\SYSTEM.img
The flash of these 4 files works fine. I then get the welcome screen where i can choose the language, HiCloud settings and so on. As long as i do not get out of the flight mode it seems to be stable. But when i enter the pin code of my simcard (amongst others), then i get a crash and reboot.
So i have the feeling that there are still some conflicts. In the stock rom there are many other IMG files. Shouldn't I also flash them? I have the following IMG files: 3RDMODEM, CACHE, CRC, CURVER, DTIMAGE, EFI, FASTBOOT, MODEM, etc etc.
I have the feeling that if i flash them all, then it might work fine. But all files do not have a specific partition, so i don't know how to flash them.
Thanks for the support!
sebastien_be said:
Hi,
My Honor 7 is still bricked and i can't get out of it. I tried to unbrick by flashing the following files from a stock rom:
fastboot flash boot .\Unbrick\BOOT.img
fastboot flash cust .\Unbrick\CUST.img
fastboot flash recovery .\Unbrick\RECOVERY.img
fastboot flash system .\Unbrick\SYSTEM.img
The flash of these 4 files works fine. I then get the welcome screen where i can choose the language, HiCloud settings and so on. As long as i do not get out of the flight mode it seems to be stable. But when i enter the pin code of my simcard (amongst others), then i get a crash and reboot.
So i have the feeling that there are still some conflicts. In the stock rom there are many other IMG files. Shouldn't I also flash them? I have the following IMG files: 3RDMODEM, CACHE, CRC, CURVER, DTIMAGE, EFI, FASTBOOT, MODEM, etc etc.
I have the feeling that if i flash them all, then it might work fine. But all files do not have a specific partition, so i don't know how to flash them.
Thanks for the support!
Click to expand...
Click to collapse
The main problem that you were on MM version (6.3.16-DEV edition of ROM, no official update) of ROM and you're trying to flash Lollipop (B201, 5.12.1). It means that your problems are probably caused by this. Try to flash 5.12.16 then OTA update to 6.1.1 (using WiFi if possible) and then rollback from Emui 4 to Emui 3.1 if you want use Emui 3.1 and Lollipop. it's up to you. It's possible that your will be able to use SIM card when you would update to 6.1.1 (MM)
Sent from PLK-TL01H
SOLVED!
Thank you Lucki_X and Inside!Out ! Indeed i was trying to flash with Android 5.0 while i was already on Android 6.
Consequently I used the unbrick option from Multi-tools by using this version PLK-TL01H_EMUI4.0_Android6.0_6.2.1(B634).zip
Now everything works fine. Can anyone tell me how to install SuperSU? Because it is due to installation of SuperSU through TWRP that it caused the crash. I installed SuperSU 2.65 BETA.
How to do and which version to install to avoid bootloop?
Thanks very much,
Sebastien.
Hi All,
any idea why i now only have 3,87GB available as internal storage?
sebastien_be said:
Hi All,
any idea why i now only have 3,87GB available as internal storage?
Click to expand...
Click to collapse
Probably because you have multiple ghost systems as a result of previous still in memory. Factory reset will help.
Thank you! This is also solved now (Factory reset in TWRP + Calvik & Cache Wipes)!
Last question: Any advice on how to install SuperSU? Because by trying to install 2.65 BETA it caused the bootloop earlier.
Is there any version to propose instead of another one?
Thanks,
To answer my question: There is only the v2.62 that is working with Honor7 ! I Tried 2.49 and 2.65 both creates startup bootloop. Hopefully this time i got a full backup made in TWRP, was pretty easy to comeback to a working version.
i have a similiar brick as you. Flashed from B201 to B352 via the OTA. Had a boodloop, tried to erase cache and factory reset.
Tried to unbrick my phone with multi tool (first with the B201 udpate.app - now with B634 update.app). Now i'm in a bootloop again. What can I do?
EDIT: I'm in the ROM now, but can't enable my SIM card and WIFI is also not working
What can i do?
Hye everyone. I started a new thread name "Huawei Mate 10 Lite Stock Firmware Backup".
In previous days i wiped all my partitions like System,Boot,Cust,Product etc through TWRP Recovery unfortunately.
Beside this Huawei didn't release stock firmware of my device so my device didn't boot anymore and whenever i enter in the recovery mode it shows up a message on the top "no OS installed". Here i stucked badly because i had not made any backup of boot, system, product vendor etc so i took my friend's device which is also Huawei Mate 10 Lite, i unlocked its bootloader and flash TWRP Recovery and make a backup of whole OS and restore it in my device and my device successfully booted.
I also post link of backup folder of version RNE-L21C185B131.
https://drive.google.com/open?id=16soc6NiVwoV0nwlxwlSHBn6zP1-iAGbp
Also post link of TWRP Recovery Mate 10 Lite Edition which has all features enable,,,,,,,,see screenshots in attachment.
https://drive.google.com/open?id=1pOmDFqhjCOU_myrD_s5-jgrWZF7pg8nb
Now , here is the guide how to restore backup files from other phone.
1. Download the "Stock Firmware backup.zip" from given link
2. Download TWRP Recovery Mate 10 lite Edition from this link if you have not flash that one (Reply on thread if you didn't know how to flash TWRP Recovery.)
3. Now put that files extract from ZIP into external sdcard in TWRP/BACKUPS/"Your phone's Serial number"/Stock backup
4. Now insert sd card and enter into TWRP Recovery.
5. If you didn't know serial number of your phone just past it in your sdcard directory.
6. Then Go to 'Mount' section and tick all the options then go back and open 'Restore' tab and tick following option BOOT, CUST IMAGE, PRODUCT IMAGE, VENDOR IMAGE, VERSION and SYSTEM. and go ahead.
7. Wait sometime, as restoring takes couple of minutes then Reboot your Device and it is booted successfully.
Enjoy....!
Hit Thanks if its Helpful.
Hi, my friend, I have an RNE-L03, which I brick, I managed to rescue it by installing the Rom from King Mezi, but I want to go back to the original firmware, you think I can use your backup on my device?
where is screen short bro
Huawei mate 10 lite rne-l21
Same problem plzz help me...
Twrp fomate all now booting problem
plzzz call me 03008605386
Hamidmirza said:
Hye everyone. I started a new thread name "Huawei Mate 10 Lite Stock Firmware Backup".
In previous days i wiped all my partitions like System,Boot,Cust,Product etc through TWRP Recovery unfortunately.
Beside this Huawei didn't release stock firmware of my device so my device didn't boot anymore and whenever i enter in the recovery mode it shows up a message on the top "no OS installed". Here i stucked badly because i had not made any backup of boot, system, product vendor etc so i took my friend's device which is also Huawei Mate 10 Lite, i unlocked its bootloader and flash TWRP Recovery and make a backup of whole OS and restore it in my device and my device successfully booted.
I also post link of backup folder of version RNE-L21C185B131.
https://drive.google.com/open?id=16soc6NiVwoV0nwlxwlSHBn6zP1-iAGbp
Also post link of TWRP Recovery Mate 10 Lite Edition which has all features enable,,,,,,,,see screenshots in attachment.
https://drive.google.com/open?id=1pOmDFqhjCOU_myrD_s5-jgrWZF7pg8nb
Now , here is the guide how to restore backup files from other phone.
1. Download the "Stock Firmware backup.zip" from given link
2. Download TWRP Recovery Mate 10 lite Edition from this link if you have not flash that one (Reply on thread if you didn't know how to flash TWRP Recovery.)
3. Now put that files extract from ZIP into external sdcard in TWRP/BACKUPS/"Your phone's Serial number"/Stock backup
4. Now insert sd card and enter into TWRP Recovery.
5. If you didn't know serial number of your phone just past it in your sdcard directory.
6. Then Go to 'Mount' section and tick all the options then go back and open 'Restore' tab and tick following option BOOT, CUST IMAGE, PRODUCT IMAGE, VENDOR IMAGE, VERSION and SYSTEM. and go ahead.
7. Wait sometime, as restoring takes couple of minutes then Reboot your Device and it is booted successfully.
Enjoy....!
Hit Thanks if its Helpful.
Click to expand...
Click to collapse
Bravo Bravo Bravo Hamidmirza and thanks
Software contains root
how can we unroot it,thank's
thxxxxxxxxxxxxx brooooooooooooooooooo
Can this be done without twrp installed + unlocked bootloader?
KURTALANLI said:
Software contains root
how can we unroot it,thank's
Click to expand...
Click to collapse
By doing factory data reset
t1ps said:
Can this be done without twrp installed + unlocked bootloader?
Click to expand...
Click to collapse
No bro, it cant b done without twrp.
What is condition of your phone?
I mean whats your problem with your mate 10 lite.
Peligrito2010 said:
Hi, my friend, I have an RNE-L03, which I brick, I managed to rescue it by installing the Rom from King Mezi, but I want to go back to the original firmware, you think I can use your backup on my device?
Click to expand...
Click to collapse
No, this backup is only for RNE-L21 models
Veecy1986 said:
Huawei mate 10 lite rne-l21
Same problem plzz help me...
Twrp fomate all now booting problem
Click to expand...
Click to collapse
Restore given backup folder in the thread.
hi bro
hello bro when i want to restore the backup the phone say unable to wipe product after that stop the recovery
please help bro
this is the image of restoring
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@Hamidmirza
thanks for your good contribution, I need the data partition to be able to work in RNE-L21C185, see it a browser has to be root for this
route: data / hw_init
copy it to a folder and upload it to a server to download it
Hamidmirza said:
No bro, it cant b done without twrp.
What is condition of your phone?
I mean whats your problem with your mate 10 lite.
Click to expand...
Click to collapse
So i tried relocking my mate 10 lite, but on the factory reset stage it sits at 99% for hours. I tried turning it off and on again, the factory reset went all fine but when i try to boot into the system it only boots into Erecovery.
t1ps said:
So i tried relocking my mate 10 lite, but on the factory reset stage it sits at 99% for hours. I tried turning it off and on again, the factory reset went all fine but when i try to boot into the system it only boots into Erecovery.
Click to expand...
Click to collapse
Did you factory reset your phone using stock recovery or twrp recovery?
Hamidmirza said:
Did you factory reset your phone using stock recovery or twrp recovery?
Click to expand...
Click to collapse
Before relocking, i flashed the stock recovery, so yes
t1ps said:
Before relocking, i flashed the stock recovery, so yes
Click to expand...
Click to collapse
I think you are very newest on the forum.
Relocking of bootloader is not possible even by using different softwares, it only can be relock by Huawei itself.
t1ps said:
Before relocking, i flashed the stock recovery, so yes
Click to expand...
Click to collapse
If your phone is in warranty, send back to company, they lock your phone's bootloader and install stock firmware
How to Install TWRP:
Note: that version is UNOFFICIAL TWRP-3.3.0-0524
.Pre-Requirements
ADB means Android Debug Bridge, and it is software that you should always do have installed on your PC.
Pre-Requisite 1
Make sure that you have the drivers for your phone installed on your PC.
If not, you can download and install them from here https://devsjournal.com/usb-drivers-...d-devices.html
Pre-Requisite 2
You must also install: Minimal ADB & Fastboot, you can download the software
from here https://devsjournal.com/download-min...boot-tool.html
Pre-Requisite 3
Your device needs this with unlocked bootloader
if it is not unlocked do the tutorial to unlock HERE
Pre-Requisite 4
Make sure you have enabled 'USB Debugging' and OEM Unlocking on your device
Settings -> Advanced settings -> Developer Options
PAY ATTENTION: If you do not see the Developer Options menu you need to do this:
Settings -> Device Info -> tap 6 or 7 times on the 'ZUI version' entry
A pop-up should appear, telling you 'now you are a developer'
------------------------------------------------
1) Download TWRP: recovery-TWRP-3.3.0-0524-LENOVO_Z5PRO_GT-CN-wzsx150.img
2) After getting the TWRP file put it in the same ADB folder
3) Now start the phone in bootlader by doing this:
Connect the phone to the PC
Start the Minimal ADB & Fastboot program from the PC
On the PC screen, type:
adb reboot bootloader
(A request may appear on the phone screen with permission of USB debugging, accept it)
The phone will now restart in Bootloader mode.
4) Now that you are in bootloader mode, from the PC, from the screen
Minimal ADB and Fastboot type:
fastboot flash recovery recovery-TWRP-3.3.0-0524-LENOVO_Z5PRO_GT-CN-wzsx150.img
Sending 'recovery' (98304 KB) OKAY [ 5.970s]
Writing 'recovery' OKAY [ 0.539s]
Done !
---------
.How to Install Root Magisk:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Done !
Credits:
Maker: wzsx150
Developer Team: LR.Team
Is there any issues related to this recovery?
firemax13 said:
Is there any issues related to this recovery?
Click to expand...
Click to collapse
I had no problem with this recovery
My device was unlocked by vendor. I'm unable to boot into twrp to root my device. The flashing is successful but it will only boot in a simple recovery where I can only install an "update.zip".
Have tried this https://forum.xda-developers.com/z5...-guide-lenovo-z5-pro-gt-t3915945#post81055547 but the problem remains.
Hope anyone can help. I need to root my device. Thanks
BlueIce84 said:
My device was unlocked by vendor. I'm unable to boot into twrp to root my device. The flashing is successful but it will only boot in a simple recovery where I can only install an "update.zip".
Have tried this https://forum.xda-developers.com/z5...-guide-lenovo-z5-pro-gt-t3915945#post81055547 but the problem remains.
Hope anyone can help. I need to root my device. Thanks
Click to expand...
Click to collapse
Have the same scenario as you but I haven't done the tutorial yet as I read your post and I got concerned. Have you fix you issue? Is it safe to do this tutorial?
No solution so far. No twrp and no root
Now I have flashed the original rom with ZUI 10. Works well and updated to ZUI 11.
luigi0824 said:
Have the same scenario as you but I haven't done the tutorial yet as I read your post and I got concerned. Have you fix you issue? Is it safe to do this tutorial?
Click to expand...
Click to collapse
I've read somewhere that you need to flash vbmeta.img if verified boot is enabled, however I couldn't find the correct img to flash anywhere. Maybe if we ask someone that has the phone already rooted.
Can anyone post wzsx150's newest TWRP 3.3.1 from October 4? It's in this thread but the download link is for registered users only. I can't sign up for a Club Lenovo account.
BlueIce84 said:
No solution so far. No twrp and no root
Now I have flashed the original rom with ZUI 10. Works well and updated to ZUI 11.
Click to expand...
Click to collapse
What method would you follow to install the stock rom, like you, it comes with the bootloader unlocked by the seller and I don't know how to flash stock rom
Use this guide:
https://forum.xda-developers.com/z5-pro-gt/how-to/guide-unbrick-guide-lenovo-z5-pro-gt-t3915945
carlshark said:
Can anyone post wzsx150's newest TWRP 3.3.1 from October 4? It's in this thread but the download link is for registered users only. I can't sign up for a Club Lenovo account.
Click to expand...
Click to collapse
I gave up on clublenovo. They require SMS authentication to post so even when you log in you can't post and download. TWRP 3.3.1 is also available from 4PDA. That's what I used.
I was able to flash the TWRP 3.3.1 but i cant root nor i cant flash anything as the folders inside the sdcard directory is showing in weird names
luigi0824 said:
I was able to flash the TWRP 3.3.1 but i cant root nor i cant flash anything as the folders inside the sdcard directory is showing in weird names
Click to expand...
Click to collapse
You need to decrypt the internal storage.
normally this is done by entering to ping code to unlock the phone in TWRP on start up.
thorvall said:
You need to decrypt the internal storage.
normally this is done by entering to ping code to unlock the phone in TWRP on start up.
Click to expand...
Click to collapse
Will I lose any data if I decrypt my phone? And where do I find that pin code?
luigi0824 said:
Will I lose any data if I decrypt my phone? And where do I find that pin code?
Click to expand...
Click to collapse
Its the pin code you use to open the phone.
And enabling does not remove data, but it does give twrp read/write permission
Is it possible to implement support for OTA updates through TWRP?
BlueIce84 said:
My device was unlocked by vendor. I'm unable to boot into twrp to root my device. The flashing is successful but it will only boot in a simple recovery where I can only install an "update.zip".
Have tried this https://forum.xda-developers.com/z5...-guide-lenovo-z5-pro-gt-t3915945#post81055547 but the problem remains.
Hope anyone can help. I need to root my device. Thanks
Click to expand...
Click to collapse
i had the same issue and discover a solution
1) you have to manually go to your phone after you finish the flash below. DO NOT cmd fastboot reboot as it will flash stock
recovery
a) fastboot flash recovery twrp.img ( i rename the tweak recovery file to twrp.img)
b) http://4pda.ru/forum/index.php?showtopic=973179&st=0
(tweak recovery version 3.31)
2) after flash quickly go to your phone fastboot mode ( reminder again: do not tyoe fastboot reboot after flash successful appear in cmd)
3) manually select recovery , select english then select reboot and TWRP will appear
issues
1) i cannot manually tweak recovery via phone ( power +volume down ) as stock recovery will appear again.
A) so you need to go your PC to redo flash recovery again
B) i did a back up and redo PC flassh recovery again and mine files are stored successful
c) there is no install root in TWRP
D) about backup...
.best to back up via OTA-USB. pixel GCI crash ( QUALCOMM CRASH DUMP MODE ) my phone and my restore
file was missing as TWRP rename the restore file. spent one hour it so decide to do stock rom
current
a) I have not flash any rom yet and my original ANTUTU benchmark hovers around 300000 to 350000 based on vendor custom global rom
b) my phone model is 8gb 128gb android version 9 and lenovo version 11.0.084
c) updatess and NFC not supported
d) i opt not too root
e) bootloader still unlock
REQUEST...
would appreciate a ROM recommendation
a) have anyone flash a rom (not china stock rom) wirh an antutu beachmark abve 400000 ?
from a novice... after 2 weeks i can finally flash tweak recovery from the phonE.
about flashing stock rom..
i opt for stock rom and my antutu hovers around 409000 to 418000. from LENOVO app centre you can install play store
butterx2341 said:
i had the same issue and discover a solution
1) you have to manually go to your phone after you finish the flash below. DO NOT cmd fastboot reboot as it will flash stock
recovery
a) fastboot flash recovery twrp.img ( i rename the tweak recovery file to twrp.img)
b) http://4pda.ru/forum/index.php?showtopic=973179&st=0
(tweak recovery version 3.31)
2) after flash quickly go to your phone fastboot mode ( reminder again: do not tyoe fastboot reboot after flash successful appear in cmd)
3) manually select recovery , select english then select reboot and TWRP will appear
issues
1) i cannot manually tweak recovery via phone ( power +volume down ) as stock recovery will appear again.
A) so you need to go your PC to redo flash recovery again
B) i did a back up and redo PC flassh recovery again and mine files are stored successful
c) there is no install root in TWRP
D) about backup...
.best to back up via OTA-USB. pixel GCI crash ( QUALCOMM CRASH DUMP MODE ) my phone and my restore
file was missing as TWRP rename the restore file. spent one hour it so decide to do stock rom
current
a) I have not flash any rom yet and my original ANTUTU benchmark hovers around 300000 to 350000 based on vendor custom global rom
b) my phone model is 8gb 128gb android version 9 and lenovo version 11.0.084
c) updatess and NFC not supported
d) i opt not too root
e) bootloader still unlock
REQUEST...
would appreciate a ROM recommendation
a) have anyone flash a rom (not china stock rom) wirh an antutu beachmark abve 400000 ?
from a novice... after 2 weeks i can finally flash tweak recovery from the phonE.
about flashing stock rom..
i opt for stock rom and my antutu hovers around 409000 to 418000. from LENOVO app centre you can install play store
Click to expand...
Click to collapse
If you boot your ZUI system, your twrp will be overwritten by a stock recovery.
However if you flash magisk, your twrp won't be overwritten anymore. If you want to preserve your twrp after rebooting on ZUI, you need to flash magisk.
whatever I do.. the twrp wont be installed (let alone the root/magisk). ADB does say the twrp is flashed... but it will always boot to or the bootloader.. or the system (not the lenovo recovery or twrp recovery). Quiet frustrating... what can I do? Want this boy rooted!
Edit: done. The twrp linked in the tutorial is not correct use this one: https://drive.google.com/file/d/13mt0RLmT83BHSUBpH-J7EhaeZQ-MPYUu/view
That worked!
I want to unlock my bootloader but the site where you request the image file for unlocking it wont accept my IMEI1.. any idea guys?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
We are not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you.
WORKING:
Decryption userdata with eu roms
Screen brightness settings
Correct screenshot color
MTP
ADB
Vibration
Sideload
To flash the TwrpDownload the recovery and copy to adb folder
Open terminal
Code:
fastboot flash recovery nameofrecovery.img
fastboot boot nameofrecovery.img
or
fastboot reboot with vol + to boot
Source Codehttps://github.com/geoanto555/android_device_xiaomi_gauguin
https://github.com/TeamWin/android_bootable_recovery
Prebuilt Stock Kernel
Thanks to TeamWin Recovery Project
all testers and developers
Thanks to Μιχάλης (chariPower) for the information(sideload)
Download Link-stwrp_gauguin_3.5.A10_05-01-2021
twrp_gauguin_3.5.A10_07-02-2021 fixed sideload and mtp
twrp_gauguin_3.5.A10_18-02-2021 fixed backup data error 255 (/data/extm)
twrp_gauguin_3.5.A10_05-03-2021 Fixed Mtp after format data & reboot recovery. (if the MTP does not open, try reboot in twrp again)
twrp_gauguin_3.5.1.A10_30-03-2021 fixed fastbootd
it’s first time i am using xiaomi phone. my device is RMN9P5G and waiting for unlocked. can i flash your recovery and install the latest stable EU rom in mifirm.net: V12.0.8.0.QJSCNXM immediately after unlock success？i’m worry a bit because some members report that internal, user data be encrypted and cannot access..
kien_vip said:
it’s first time i am using xiaomi phone. my device is RMN9P5G and waiting for unlocked. can i flash your recovery and install the latest stable EU rom in mifirm.net: V12.0.8.0.QJSCNXM immediately after unlock success？i’m worry a bit because some members report that internal, user data be encrypted and cannot access..
Click to expand...
Click to collapse
From my experience, the recovery cannot decrypt the stock ROMs, you have to flash a custom ROM (Arrow and Lineage are the only 2 right now), or flash a xiaomi EU ROM.
Copy the rom to sdcard or usb otg.
Format data
Reboot recovery
Flash rom.
With xiaomi eu decryption works...
Decryption on stock rom works if I hotboot TWRP (fastboot boot twrp.img). If I flash it, TWRP doesn't prompt me for a password when started and keeps data encrypted.
Hi there, thank you for the TWRP. Is there any chance to decrypt also user 999 for the Dual apps on the .eu ROMs?
not for now. I will upload new version soon
ilyachelsea said:
Is there any chance to decrypt also user 999 for the Dual apps on the .eu ROMs?
Click to expand...
Click to collapse
twrp_gauguin_MI10TL-RN9P5G_MI10I_3.5.A10_18-02-2021_BL-L
Fixed backup userdata (error 255 for data/extm)
User 999 can be decrypted only with default password ( without pattern-pin-pass) for now.
Thank you, but my password is PIN, anyway the recent twrp can't decrypt user 999. It is the message in red: "Failed decrypt user 999"
Only without pin,pass,pattern can be decrypted user999
It's a pity. I intend to back up also user 999 to keep my dual banking apps with the access data. If I first remove the PIN, and backup user 999 with the TWRP, after restore I will have to set up access again. This kills the benefit of the decryption and makes backup of 999 useless.
Thank you anyway and I hope, NO PIN is the temporary requirement of this version.
Hello everybody! Last week I unlocked the bootloader of my gauguin and initially I tried the official TWRP Recovery released by TWRP official page but it didn't work correctly and I couldn't flash zips, so I tried this beta version released by geoanto555 and it worked smoothly, I flashed zips and I had root permissions... But last night the smartphone had the battery low and it turned off, when I connected it to the charger it automatically reboot in fastboot and I can only enter in recovery mode. Sorry but I'm new in the modding world and I don't know what to do.. First brick.. What I did wrong? Anybody can help me? Is there anything I can do or I have to buy a new phone? Thanks to who will answer . Good evening.
devedel said:
Hello everybody! Last week I unlocked the bootloader of my gauguin and initially I tried the official TWRP Recovery released by TWRP official page but it didn't work correctly and I couldn't flash zips, so I tried this beta version released by geoanto555 and it worked smoothly, I flashed zips and I had root permissions... But last night the smartphone had the battery low and it turned off, when I connected it to the charger it automatically reboot in fastboot and I can only enter in recovery mode. Sorry but I'm new in the modding world and I don't know what to do.. First brick.. What I did wrong? Anybody can help me? Is there anything I can do or I have to buy a new phone? Thanks to who will answer . Good evening.
Click to expand...
Click to collapse
If you have access to the recovery, or fastboot, you can flash the original firmware with fastboot, but watch out, for some reason, when i flash the original rom from Windows using fastboot, it crashes, but with Linux it just works
AnibalSP said:
If you have access to the recovery, or fastboot, you can flash the original firmware with fastboot, but watch out, for some reason, when i flash the original rom from Windows using fastboot, it crashes, but with Linux it just works
Click to expand...
Click to collapse
In my device the rom is still the original. Do I have to do it anyway? What can happen if I try to flash a custom rom? If I only do the factory reset will I lose also TWRP?
AnibalSP said:
If you have access to the recovery, or fastboot, you can flash the original firmware with fastboot, but watch out, for some reason, when i flash the original rom from Windows using fastboot, it crashes, but with Linux it just works
Click to expand...
Click to collapse
I'm trying to do this with XiaoMiTool v2.. Thanks
devedel said:
In my device the rom is still the original. Do I have to do it anyway? What can happen if I try to flash a custom rom? If I only do the factory reset will I lose also TWRP?
Click to expand...
Click to collapse
If you can boot to android, or boot to TWRP / Orangefox, you don't need to flash again miui stock
If you flash a second rom, the worst thing that can happen, is that the rom may not work, but you wipe the internal memory (dalvik cache and data) and it should be running again
If you loose twrp for some reason, you can flash it again with xiaomitoolv2, or with fastboot
I'd recommend to you to try rooting, installing roms and similars things in an old phone if you don't are confident / know what are you doing, you will learn a lot in a few days of tinkering.
Anyone know what I need? I can't finish the installation of a official xiaomi rom to unbrick my device
devedel said:
View attachment 5257349
Anyone know what I need? I can't finish the installation of a official xiaomi rom to unbrick my device
Click to expand...
Click to collapse
Hi,
Download the official stock rom
Dont use XiaoMiToolV2, instead use MiFlash (official tool). Works for me every time. Then connect your phone in fastboot and flash all, I use the clean all and lock option which relocks my bootloader but you could just clean all and leave the bootloader unlocked. Then you can start again
fizzy900 said:
Hi,
Download the official stock rom
Dont use XiaoMiToolV2, instead use MiFlash (official tool). Works for me every time. Then connect your phone in fastboot and flash all, I use the clean all and lock option which relocks my bootloader but you could just clean all and leave the bootloader unlocked. Then you can start again
Click to expand...
Click to collapse
Hi, thanks for your advice.
Do you think it can works if usb debugging is off? I'm afraid I've disabled it the night the phone bricked.
I did wrong too many things but was my first try, tomorrow I'll buy a new Mi 10t lite and I'll try again, using more precautions.
Thank you all anyway, good evening.
devedel said:
Hi, thanks for your advice.
Do you think it can works if usb debugging is off? I'm afraid I've disabled it the night the phone bricked.
I did wrong too many things but was my first try, tomorrow I'll buy a new Mi 10t lite and I'll try again, using more precautions.
Thank you all anyway, good evening.
Click to expand...
Click to collapse
Enabled debugging is needed for adb when the system is running. For fastboot it does not matter.
Hello people!
Im glad to present the first 100% functional TWRP for our smartwatches
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WARNING: YOU NEED YOUR OWN DIY CABLE FOR IT
For install:
- Download attached file...
• rover = Ticwatch Pro 3 LTE
• rubyfish = Ticwatch Pro 3 GPS
- Put device on fastboot mode (press and hold both buttons on the side until fastboot appears)
- fastboot flash recovery "DEVICE"_recovery.img
If you dont wipe anything (system, vendor ...) The stock recovery back when u reboot to SYSTEM (Therefore you will always have the recovery stock)
- Reboot to recovery and play with it!
Bugs:
- NO DECRYPTION (for now no way for it... If any know how Fix please tell)
- No appear all on backup menú (only, system, boot, cache and internal memory, no know why)
*fixed thanks to @xSylla
CHANGELOG:
2021-10-02:
- Changed kernel to Compiled from @theOriginalSuperl2
- Reworked all device Tree
- Fixed Encryption
- Now can backup all partitions
2021-10-01:
- Initial version with no decryption
SOURCE CODE: https://github.com/ONE-WearOS/device_mobvoi_rubyfish and https://github.com/ONE-WearOS/device_mobvoi_rover
Versión: android-9.0
STATUS: STABLE
Thanks:
@Encoh
@theOriginalSuperl2
@Atarii
@xSylla
Images:
BadWolfYe said:
Hello people!
Im glad to present the first 90% functional TWRP for our smartwatches
Click to expand...
Click to collapse
Damn, that was quick bro. Been watching this develop for the last 2 days and BAM, here it is. I should have my cable this weekend or Monday. Once i get it rearranged and connecting to my TWP3, i will be available to help if any is needed.
Thanks for the update!
_Sherrif said:
Damn, that was quick bro. Been watching this develop for the last 2 days and BAM, here it is. I should have my cable this weekend or Monday. Once i get it rearranged and connecting to my TWP3, i will be available to help if any is needed.
Thanks for the update!
Click to expand...
Click to collapse
hahahahaha, we've been testing for a long time, but it wasn't until encoh facilitated the dump that I contacted him to see how he did ... and as a result of that we were able to advance much more ...yesterday we already had a semi-functional twrp (it did not mount anything xD)what I don't think I will achieve is decrypting ... I've been with that all day with no results
Glad to see this! Thank you guys and ladies for your efforts!
Waiting for 100% TRWP, international rom, and full guide for rover
Soon i update with 100% functional TWRP
Today or tomorrow
Post Updated!!!!!
100%? sure?
Good job man
Thanks a lot
I gotta get a new cable.
is working!! and i try flash the ota update.zip test
because my watch is dev.keys rom but i dont know why
Need a little help folks.
Not sure if i am doing something wrong, but i cannot get TWRP to load/boot on my TWP3 (GPS). Here was my steps. I am attaching a copy of my console if it helps.
1. Fastboot unlocked bootloader "fastboot oem unlock". TWP3 is now unlocked.
2. After the watch formats and restarts, i reconnect the DIY cable and ran this command "adb reboot bootloader" the watch reboots to bootloader/fastboot mode.
3. Once the watch gets to the bootloader menu, I then flash the ruby fish TWRP img with this command "fastboot flash recovery rubyfish_recovery.img" Console shows it writes the recovery OK.
4. After the rubyfish_recovery.img has flashed i run this command "fastboot reboot recovery" and it brings me back to bootloader/fastboot mode. I have even flashed the rubyfish_recovery and toggled on the watch to recovery and selected and it brings me back to bootloader/fastboot.
Any guidance would be appreciated with flashing TWRP.
Also, the comment in the OP
If you dont wipe anything (system, vendor ...) The stock recovery back when u reboot to SYSTEM (Therefore you will always have the recovery stock)
Click to expand...
Click to collapse
I read this as, TWRP will not stay unless you wipe system, vendor and ???. Once i finally get TWRP to boot do i need to wipe anything specific to keep TWRP other than system and vendor? A little confused on this one. Sorry for this newb question.
Thanks
_Sherrif said:
Need a little help folks.
Not sure if i am doing something wrong, but i cannot get TWRP to load/boot on my TWP3 (GPS). Here was my steps. I am attaching a copy of my console if it helps.
1. Fastboot unlocked bootloader "fastboot oem unlock". TWP3 is now unlocked.
2. After the watch formats and restarts, i reconnect the DIY cable and ran this command "adb reboot bootloader" the watch reboots to bootloader/fastboot mode.
3. Once the watch gets to the bootloader menu, I then flash the ruby fish TWRP img with this command "fastboot flash recovery rubyfish_recovery.img" Console shows it writes the recovery OK.
4. After the rubyfish_recovery.img has flashed i run this command "fastboot reboot recovery" and it brings me back to bootloader/fastboot mode. I have even flashed the rubyfish_recovery and toggled on the watch to recovery and selected and it brings me back to bootloader/fastboot.
Any guidance would be appreciated with flashing TWRP.
Also, the comment in the OP
I read this as, TWRP will not stay unless you wipe system, vendor and ???. Once i finally get TWRP to boot do i need to wipe anything specific to keep TWRP other than system and vendor? A little confused on this one. Sorry for this newb question.
Thanks
Click to expand...
Click to collapse
For enter to recovery use bootloader menú. No commands.
When u see "recovery Mode" enter on It
No wipe nothing because actually no exist ROM for recover It (working on it)
When u reboot to SYSTEM the custom recovery no work. Because system patch the custom recovery to stock.
Got it. Tried to reboot to recovery from bootloader menu, but i may have borked it. Will try again.
.
Thank you!
great job! We hope you breakthrou this with good results
Hello everyone. Hope you are all healthy ... I have a Ticwatch 3 pro GPS and would like to root with twrp and then play a custom Rom on it. Root rights are important to uninstall unnecessary apps
I've been researching here in the forum for 2 days. How can I unlock the bootloader without the cable. Is there a good guide for a beginner that explains everything from bootloader to custom installation? Would be very grateful to you. First of all, I really took the time to find what I was looking for here.
kamalski said:
Hello everyone. Hope you are all healthy ... I have a Ticwatch 3 pro GPS and would like to root with twrp and then play a custom Rom on it. Root rights are important to uninstall unnecessary apps
I've been researching here in the forum for 2 days. How can I unlock the bootloader without the cable. Is there a good guide for a beginner that explains everything from bootloader to custom installation? Would be very grateful to you. First of all, I really took the time to find what I was looking for here.
Click to expand...
Click to collapse
First of all, there is no way to unlock bootloader without a cable
So there are no other way to get root and unlock the boatloader of the ticwatch pro 3
Don't understand why you have to make things so difficult. Life with Covid is hard enough. Why doesn't anyone help them .... Don't deny that. Is it too much to ask to say yes there is an alternative to rooting or not. My apologies for the inconvenience when I ask. If it only works with cable then I would be happy to receive instructions
kamalski said:
So there are no other way to get root and unlock the boatloader of the ticwatch pro 3
Click to expand...
Click to collapse
Like said in the opening post, you can unlock bootloader, but only with do-it-yourself cable, like modified TicWatch S/E cable. Consult this guide:
https://www.reddit.com/r/WearOS/comments/p3oj8i
Once you manage to unlock bootloader, you can try to follow this instructions: Post in thread 'TicWatch Pro 3 development' https://forum.xda-developers.com/t/ticwatch-pro-3-development.4312327/post-86176943
Of course, all you do is on your own responsibility
PS. Remember that rooting the watch can compromise OTA updates. Personally I did not root my watch
Tip Top. Schukran Katir Said. Thank you very much for this answer I will buy a cable on ebay and do this. Good bless you and your family and push covid away