guide to install Xposed?
Download xposed-v84-sdk23-arm64.zip and xposed installer 3.0 from
http://forum.xda-developers.com/showthread.php?t=3034811 and follow the instructions there. Works for me. Good Luck!
Sent from my Le X820 using XDA Free mobile app
House.m.d said:
Download xposed-v84-sdk23-arm64.zip and xposed installer 3.0 from
http://forum.xda-developers.com/showthread.php?t=3034811 and follow the instructions there. Works for me. Good Luck!
Sent from my Le X820 using XDA Free mobile app
Click to expand...
Click to collapse
thanks for the reply, I tried to install the version that you reported to me, in fact you install it on the first screen get the following error "application UI system is locked in an unusual way" with two OK CANCEL options, if We press one of the two calls for infinite
can you help me
my current rom "The" _x820-MAX_ROM-5.6.014S-V23_CUOCO92
TWRP 3.02
I don`t know this Rom. I am on latest official release with TWRP 3.0.2. Will test it tomorow
House.m.d said:
I don`t know this Rom. I am on latest official release with TWRP 3.0.2. Will test it tomorow
Click to expand...
Click to collapse
ok thanks, wait for your test
Ok, tested with Clean Installation of Le2_X820-MAX_ROW-5.6.014S-V23_CUOCO92, Open Gapps arm64 pico and SuperSu 2.72
All ok. But after flashing of Xposed System interface error. Seems Xposed wont run on this Rom.
Back to latest official LE_X2_X820-CN-FN-FEXCNFN5601405314S-5.6.014S
Sorry
i have the same problem
hi there! Installed Xposed without any problems on the newest 14S Rom!
I did that because i hoped to find a way to get something like doubletap2wake through that but it seems like there is nothing you can do if the kernel itself doesnt support it from the getgo.
Do you guys know of any more ways to wake up the le max 2 apart from the power button and fingerprint sensor?
Thanks!
Daranus said:
hi there! Installed Xposed without any problems on the newest 14S Rom!
I did that because i hoped to find a way to get something like doubletap2wake through that but it seems like there is nothing you can do if the kernel itself doesnt support it from the getgo.
Do you guys know of any more ways to wake up the le max 2 apart from the power button and fingerprint sensor?
Thanks!
Click to expand...
Click to collapse
Use gravity screen and you can wake it by movement or gestures (wipe over proximity sensor). No more buttons for me...
Socworking in only stock rom?
House.m.d said:
Download xposed-v84-sdk23-arm64.zip and xposed installer 3.0 from
http://forum.xda-developers.com/showthread.php?t=3034811 and follow the instructions there. Works for me. Good Luck!
Sent from my Le X820 using XDA Free mobile app
Click to expand...
Click to collapse
I tried to flash Xposed (TWRP flash) but after i rebooted it says like "system interface not responding", i'm on cuoco's EUI 5.9 but there seems to be no way to install Xposed on cuoco's rom's...
Xposed is working on Cuocos but only special version of 79
Read link below
https://forum.xda-developers.com/le...-debloated-t3395175/post67415598#post67415598
systemless xposed installer
friends.. i flashed systemless xposed installer on my le max 2 and after the reboot i found that my fingerfrint sensor is not working.. i read somewhere "to disable this i need to delete the xposed.img from somewhere in the root directory". but i found no file like this.. now i'm in trouble.. help me if you know anything about this
House.m.d said:
Download xposed-v84-sdk23-arm64.zip and xposed installer 3.0 from
http://forum.xda-developers.com/showthread.php?t=3034811 and follow the instructions there. Works for me. Good Luck!
Click to expand...
Click to collapse
I'm on stock s19 indian ROM. XPOSED worked only until i use SuperSU as root manager. I switched to Magisk and now i can't able to install systemless XPOSED. It stuck on booting screen. I tried this one with Magisk, got it installed properly, safetynet passed with patch, but none of the modules worked.
So what should i do to have working XPOSED?
kavinferrara said:
I'm on stock s19 indian ROM. XPOSED worked only until i use SuperSU as root manager. I switched to Magisk and now i can't able to install systemless XPOSED. It stuck on booting screen. I tried this one with Magisk, got it installed properly, safetynet passed with patch, but none of the modules worked.
So what should i do to have working XPOSED?
Click to expand...
Click to collapse
Sorry, i sold my le max in July 2016. Now i am on Oneplus 5
House.m.d said:
Sorry, i sold my le max in July 2016. Now i am on Oneplus 5
Click to expand...
Click to collapse
Okay
Related
Hi guys, I'm trying to install xposed but using the latest version doesn't seem to work. It successfully installs in recovery but then, once in Android, it says it's not yet compatible. I've seen lot of you have installed and managed to have it working. Could you please tell me which version you used? And how you installed it. Thanks
What ROM are u on?
http://bit.ly/2b6tR8R
Check out this post
Pphish20 said:
What ROM are u on?
Click to expand...
Click to collapse
Rooted stock 10d
[email protected] said:
http://bit.ly/2b6tR8R
Check out this post
Click to expand...
Click to collapse
Thank you. Just a question. Will it be compatible with official systemless version once it's out?
SpH1nX said:
Thank you. Just a question. Will it be compatible with official systemless version once it's out?
Click to expand...
Click to collapse
systemless version is not under official development by rovo89
basically, another dev (topjohnwu) is developing it from official sources
maybe in the future rovo89 will provide some tests builds, but that is simply up to him
so short answer, it might be compatible, but no promises
however, current unofficial version is compatible (if you test), but some xposed modules are not fully developed under systemless root
gwolfu said:
systemless version is not under official development by rovo89
basically, another dev (topjohnwu) is developing it from official sources
maybe in the future rovo89 will provide some tests builds, but that is simply up to him
so short answer, it might be compatible, but no promises
however, current unofficial version is compatible (if you test), but some xposed modules are not fully developed under systemless root
Click to expand...
Click to collapse
rovo89 officially stated that the next version will be systemless
Regarding installer, have I to mandatory use material design version or I can stay with the official one? Is it compatible?
witch version of xposed are you downloading? you are supposed to download "xposed-v86-sdk23-arm64.zip"
danroger said:
witch version of xposed are you downloading? you are supposed to download "xposed-v86-sdk23-arm64.zip"
Click to expand...
Click to collapse
That's the one I'm using. It installs fine with TWRP but once I'm back in android the installer says it's not supported. I don't know if it doesn't see it installed at all
SpH1nX said:
That's the one I'm using. It installs fine with TWRP but once I'm back in android the installer says it's not supported. I don't know if it doesn't see it installed at all
Click to expand...
Click to collapse
use xposed app by DVDandroid
is a material version of the app compiled from official sources, and heck, a lot better and more visual appealing than the original app. also quite good support
original thread: http://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
download link: http://forum.xda-developers.com/devdb/project/dl/?id=19668&task=get
gwolfu said:
use xposed app by DVDandroid
is a material version of the app compiled from official sources, and heck, a lot better and more visual appealing than the original app. also quite good support
original thread: http://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
download link: http://forum.xda-developers.com/devdb/project/dl/?id=19668&task=get
Click to expand...
Click to collapse
Official zip with material design version? Does it work?
SpH1nX said:
Official zip with material design version? Does it work?
Click to expand...
Click to collapse
using it since more then half a year already, so rest assures it's working
check thread I submitted for more info in case of doubts
Everything is linked, Xposed, SuperSU, magisk. It depends on the version you use, in my case I SuperSU 2.76 systemless, magisk, and 86.3 Xposed systemless by topjohnwu, and great time. I leave the link:
http://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
[email protected] said:
Everything is linked, Xposed, SuperSU, magisk. It depends on the version you use, in my case I SuperSU 2.76 systemless, magisk, and 86.3 Xposed systemless by topjohnwu, and great time. I leave the link:
http://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
Click to expand...
Click to collapse
I'm not doubting of you guys, you're here to help me and I appreciate that. It's just that I'd like to remain as official as possible. How can an app with a different UI work where the original, official, does not?
SpH1nX said:
I'm not doubting of you guys, you're here to help me and I appreciate that. It's just that I'd like to remain as official as possible. How can an app with a different UI work where the original, official, does not?
Click to expand...
Click to collapse
Just try it
A friend of mine also ran into some issues like yours on the official app but as with your case he tried the material one and worked wonders
Also if you run the material version you are also as close to stock as possible since this is compiled from official sources but only a few visual changes made to the app
Dont work at mine H850
oOFrAnzOo said:
Dont work at mine H850
Click to expand...
Click to collapse
Could you please tell framework and installer versions?
oOFrAnzOo said:
Dont work at mine H850
Click to expand...
Click to collapse
in xposed app, navigate to official tab, and click install/update button
choose ok and reboot to recovery (TWRP) and let it install and reboot
as soon as reboot is done, xposed should work
gwolfu said:
in xposed app, navigate to official tab, and click install/update button
choose ok and reboot to recovery (TWRP) and let it install and reboot
as soon as reboot is done, xposed should work
Click to expand...
Click to collapse
Done. Get System UI Force Close every Time.
SpH1nX said:
Could you please tell framework and installer versions?
Click to expand...
Click to collapse
Latest Material Installer and Systemless v86.3 and v86.4.
Tried official v86 too
I can confirm that official framework works fine with material design installer. That's the only combination that's working on my G5. Haven't tried systemless version.
Now that the xposed framework has been released (beta) for oreo, is there anyone thats managed to get it working on a mate 10 pro?
Ive tried from within the xposed app to install it (sdk26) and bootloops, tried to flash the zip within flashfire pro (rooted) and bootloops again
Same problem....after installation of xposed framework always bootloops.....
someone else tried?
Same here, never managed to get it working on My Mate 10 Pro
Just got my mate 10 and was excited to load up the xposed beta and gravity box and then saw this
btw, have any of you guys been able to root without getting the disadvantages listed here: https://forum.xda-developers.com/mate-10/how-to/how-to-huawei-mate-10-pro-standard-t3709535/page4 of losing AI, and losing theme functionality? I keep getting bad news about this phone after buying!
shadders said:
Just got my mate 10 and was excited to load up the xposed beta and gravity box and then saw this
btw, have any of you guys been able to root without getting the disadvantages listed here: https://forum.xda-developers.com/mate-10/how-to/how-to-huawei-mate-10-pro-standard-t3709535/page4 of losing AI, and losing theme functionality? I keep getting bad news about this phone after buying!
Click to expand...
Click to collapse
Don't worry mate !
It's true, we still don't have xposed working however you can root with Magisk and you won't loose any feature. You'll need to factory reset to unlock the bootloader tho.
https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
Safe0716 said:
Don't worry mate !
It's true, we still don't have xposed working however you can root with Magisk and you won't loose any feature. You'll need to factory reset to unlock the bootloader tho.
https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
Click to expand...
Click to collapse
Thank you! that makes me feel a bit better about the mate 10 if I can at least get root without sacrificing anything. thank you for the information and the link. I'm having a hard time understanding the instructions in that thread however, and just posted a question there about it. Would appreciate any help in figuring it out!
recently, we have many news for mate 10 (pro). magisk/TWRP, is there any update related to xposed for mate 10(pro)? expecting for this framework to have my device modified further.
Does anybody have news about Mate 10 (Pro) compatible Xposed? Since we got data decrypting twrp now the lack of Xposed is teh last thing holding me from unlocking / rooting my phone. Thanks!
Diddy555 said:
Does anybody have news about Mate 10 (Pro) compatible Xposed? Since we got data decrypting twrp now the lack of Xposed is teh last thing holding me from unlocking / rooting my phone. Thanks!
Click to expand...
Click to collapse
Not work with new twrp and decrypting data
Sent from my BLA-L29 using Tapatalk
still no any updates about Xposed for Mate 10 ?
Bootloop FIXED !!!
The bootloop as been fixed with the Beta 4 avalable here
https://www.dropbox.com/s/bkb7iluiqob8qwa/xposed-v90-sdk26-arm64-beta4-test1.zip?dl=1
No need to factory reset, just flash over the Beta 4 with TRWP and wait 3 minutes after the reboot. VOILA !
Enjoy
Thank you and rovo89.
That's big surprise !!!
I have been using Xposed for a few days but there aren't many modules that work with it in our os.
this is valid for the mate 10 - no pro- right?
nicksimoneau said:
The bootloop as been fixed with the Beta 4 avalable here
https://www.dropbox.com/s/bkb7iluiqob8qwa/xposed-v90-sdk26-arm64-beta4-test1.zip?dl=1
No need to factory reset, just flash over the Beta 4 with TRWP and wait 3 minutes after the reboot. VOILA !
Enjoy
Click to expand...
Click to collapse
This Beta 4 also working with Mate 10 Lite 8.0 Cusrom Rom?
Ok... M10Pro // Aosp 8.1 => xposed works just fine :good:
amazing,
so steps are:
1. https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
2. https://forum.xda-developers.com/showpost.php?p=75407467&postcount=5
anything im missing? any tips? any downsides (features not working anymore etc)?
what xposed modules do you reccomend? what other changes did you make to the software experience?
i hate emui but i like privatespace feature...
pixielott46 said:
amazing,
so steps are:
1. https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
2. https://forum.xda-developers.com/showpost.php?p=75407467&postcount=5
anything im missing? any tips? any downsides (features not working anymore etc)?
what xposed modules do you reccomend? what other changes did you make to the software experience?
i hate emui but i like privatespace feature...
Click to expand...
Click to collapse
Xposed runs atm only at phh treble ROM.
https://forum.xda-developers.com/honor-8-pro/development/rom-t3758564 or use original phh treble feed with v18 system.img for A-only devices (both works fine on my Mate 10 Pro C432)
Flash the system.img via fastboot, clear userdata (factory reset) in stock recovery. (it will delete all user data!)
Flash TWRP recovery via fastboot. Go to adb sideload mode.
Root with magisk zip through adb sideload. Reboot into system. Alternatively you can flash the pre rooted phh image
Then download the latest xposed installer apk and install xposed through recovery mode.
Reboot.
P. S. aosp didn't have a private space feature...
P. P. S. You can install p20 cam via magisk later - works fine for me
I use GravityBox, Lucky Patcher, BubbleUPnP
Xposed successfully installed! I have realised however that the stock sound recorder app stops working after I flash Xposed - the stock sound recorder app force closes as soon as you touch the icon.
Also any applications installed/updated receive an incompatible with system error notification message although they are compatible.
It wouldn't be great if anyone has a fix to the above two problems.
Just reporting bugs ?
Someone should also start an actual official Xposed thread.
nicksimoneau said:
The bootloop as been fixed with the Beta 4 avalable here
https://www.dropbox.com/s/bkb7iluiqob8qwa/xposed-v90-sdk26-arm64-beta4-test1.zip?dl=1
No need to factory reset, just flash over the Beta 4 with TRWP and wait 3 minutes after the reboot. VOILA !
Enjoy
Click to expand...
Click to collapse
wisemanwizz said:
Xposed successfully installed! I have realised however that the stock sound recorder app stops working after I flash Xposed - the stock sound recorder app force closes as soon as you touch the icon.
Also any applications installed/updated receive an incompatible with system error notification message although they are compatible.
It wouldn't be great if anyone has a fix to the above two problems.
Just reporting bugs ?
Someone should also start an actual official Xposed thread.
Click to expand...
Click to collapse
Xposed runs now on stock FW for me too. :victory:
I have exactly the same problem with sound recorder, but other installation procedures working fine.
GravityBox O didn't take any changes at all...
Other modules runs smooth so far (3a, Greenify, etc)
For those interested we can now run XPosed on XZ1
Me myself I have FW 47.1.A.12.34
Install the DRMFix according to post 53 in the [oreo]XZ1-drmfix-root-ricoff. This gives me recovery, root and DRMFix.
Then I downloaded and flashed installed XPosed and the installer from the [OFFICIAL] Xposed for Lollipop/Marshmallow/Nougat/Oreo thread
SDK for OREO 8.0 (which is the version in FW 47.1.A.12.34) is SDK26 and the architecture is Arm64.
I Flashed the XPosed zip, booted phone and installed the XposedInstaller apk. The app then told me the framework was installed but not loaded, so I istalled it once more from the app (direct install, not using recovery). After reboot did everything work as a charm
I used to use Xposed but I can't think of any modules that are worth bothering with the install these days. Can you recommend anything worthwhile bro?
N1ghtr08d said:
I used to use Xposed but I can't think of any modules that are worth bothering with the install these days. Can you recommend anything worthwhile bro?
Click to expand...
Click to collapse
I actually only use a package for greenify and a "Eventlock" module to get my calendar data on the lockscreen
Yeah, that's the problem for me. Xposed used to be about to do so much that Android couldn't but the OS has come so far now that I don't feel the need for it anymore.
Sent from my G8341 using Tapatalk
Yeeea.....bur I just had to check it out when I saw there is a beta version of Xposed for Oreo.
Just because I'm curious
I know, I feel the same way but just didn't see the benefit of it at the time. I used to love Xposed. I actually forgoe certain upgrades because I would lose Xposed in the past. Those days are gone now though.
For all who are intrested:
Gravity Box for Oreo is now released!
I think the best XPosed Modul on the Repository!
pergoteborg said:
For those interested we can now run XPosed on XZ1
Me myself I have FW 47.1.A.12.34
Install the DRMFix according to post 53 in the [oreo]XZ1-drmfix-root-ricoff. This gives me recovery, root and DRMFix.
Then I downloaded and flashed installed XPosed and the installer from the [OFFICIAL] Xposed for Lollipop/Marshmallow/Nougat/Oreo thread
SDK for OREO 8.0 (which is the version in FW 47.1.A.12.34) is SDK26 and the architecture is Arm64.
I Flashed the XPosed zip, booted phone and installed the XposedInstaller apk. The app then told me the framework was installed but not loaded, so I istalled it once more from the app (direct install, not using recovery). After reboot did everything work as a charm
Click to expand...
Click to collapse
I have the same problem with Xposed on FW 47.1.A.12.179 with SDK26 v. 90-beta 3 but workaround doesn't work.
pepe_k said:
I have the same problem with Xposed on FW 47.1.A.12.179 with SDK26 v. 90-beta 3 but workaround doesn't work.
Click to expand...
Click to collapse
Same here... It's sad to see there is nothing to do but waiting
TurkO546 said:
Same here... It's sad to see there is nothing to do but waiting
Click to expand...
Click to collapse
Same problem, on my xperia xz premium .179, xposed doesn't work since .75,
I try for a week...trying all solutions, nothing works, xposed installer tells me that xpoed is installed but doesn't work.
waiting for solutions from @rovo89 :good:
Castiglionais said:
Same problem, on my xperia xz premium .179, xposed doesn't work since .75,
I try for a week...trying all solutions, nothing works, xposed installer tells me that xpoed is installed but doesn't work.
waiting for solutions from @rovo89 :good:
Click to expand...
Click to collapse
Thanks for the report. If you know about a fix when it's available, please share the info.
Castiglionais said:
Same problem, on my xperia xz premium .179, xposed doesn't work since .75,
I try for a week...trying all solutions, nothing works, xposed installer tells me that xpoed is installed but doesn't work.
waiting for solutions from @rovo89 :good:
Click to expand...
Click to collapse
Yes @rovo89 Please help!
I tried to install Beta 2 to my G8341 and the phone booted (.179 firmware)
I tried to install simple modules like "Statusbar Download Progress" and it is activated.
but installing gravitybox caused bootloop
that's weird and good news guys
TurkO546 said:
I tried to install Beta 2 to my G8341 and the phone booted (.179 firmware)
I tried to install simple modules like "statusbar download process" and it is activated.
but installing gravitybox caused bootloop
that's weird and good news guys
Click to expand...
Click to collapse
Yes, very good news. How did you solve bootloop? Did you flash a unistall zip from twrp?
snake218 said:
Yes, very good news. How did you solve bootloop? Did you flash a unistall zip from twrp?
Click to expand...
Click to collapse
1- uninstalled xposed via twrp
2- booted
3- uninstalled the module
4- installed beta 2 again and xposed working now
battery care+ also working
TurkO546 said:
I tried to install Beta 2 to my G8341 and the phone booted (.179 firmware)
I tried to install simple modules like "statusbar download process" and it is activated.
but installing gravitybox caused bootloop
that's weird and good news guys
Click to expand...
Click to collapse
I'll try this tutorial, i'll give feedback later, thanks
i confirm Xposed beta 2 working on fw .179 (G8342 dual)
GravityBox caused bootloops...
monsieurlezard said:
i confirm Xposed beta 2 working on fw .179 (G8342 dual)
GravityBox caused bootloops...
Click to expand...
Click to collapse
Pls gimme a downlaod link of beta 2 can't find it on internet.
pw1nce said:
Pls gimme a downlaod link of beta 2 can't find it on internet.
Click to expand...
Click to collapse
https://dl-xda.xposed.info/framework/sdk26/arm64/
TurkO546 said:
1- uninstalled xposed via twrp
2- booted
3- uninstalled the module
4- installed beta 2 again and xposed working now
battery care+ also working
Click to expand...
Click to collapse
Beta 2 activated but when i install a mod my device going to bootloop
Has anyone gotten Viper4Android working on their Galaxy S9+ yet? If so, on which ROM or OS version?
UPDATE: I've found that this version of ARISE works perfectly on my S9+, here are my working arise_customize.prop settings:
I installed this over a ROM using Magisk, so I made sure to include the core and the magiskcompatibility module first.
I then selected ViPER4Arise 2.5.0.5, and didn't install anything else.
Yes, it is working great on LightROM on my S9+
VICosPhi said:
Yes, it is working great on LightROM on my S9+
Click to expand...
Click to collapse
I see LightROM includes Dolby Atmos, did it also then include v4a or did you flash a specific v4a package?
I flashed the V4A zip file via TWRP that I had downloaded from one of the S8 forums when I had S8 and it worked fine
VICosPhi said:
I flashed the V4A zip file via TWRP that I had downloaded from one of the S8 forums when I had S8 and it worked fine
Click to expand...
Click to collapse
Slick, thanks man! I'll give that a shot, I still have the Arise installer that used for my S8 myself so I'll see if that takes
Sent from my Galaxy S8 using XDA Labs
benmeroff said:
Slick, thanks man! I'll give that a shot, I still have the Arise installer that used for my S8 myself so I'll see if that takes
Sent from my Galaxy S8 using XDA Labs
Click to expand...
Click to collapse
Yes that was it, the ARISE package. It works
Sent from my SM-G965U1 using Tapatalk
Hi
I have good sound with viper ?
I use version for magisk and is not good. Volume is poor
Its possible To give me one link of your viper ?
Thanks
VICosPhi said:
Yes that was it, the ARISE package. It works
Click to expand...
Click to collapse
So I've tried using the ARISE Magnum Opus 20170724 installer I had, but on any stock-based ROM it just bootloops the system. Which one works for you? I can see now I was several ARISE versions behind but would prefer not spend time waiting for my rather sizeable Nandroid to restore between testing versions if at all possible lol...
Sent from my Galaxy S8 using XDA Labs
I haven't tried it on stock yet. Maybe try a custom kernel first then try flashing it.
Sent from my SM-G965U1 using Tapatalk
It would be amazing if we could figure out which version of Viper works on the S9+ and maybe some simple steps..
babyboy3265 said:
It would be amazing if we could figure out which version of Viper works on the S9+ and maybe some simple steps..
Click to expand...
Click to collapse
benmeroff said:
Has anyone gotten Viper4Android working on their Galaxy S9+ yet? If so, on which ROM or OS version?
UPDATE: I've found that this version of ARISE works perfectly on my S9+, here are my working arise_customize.prop settings:
I installed this over a ROM using Magisk, so I made sure to include the core and the magiskcompatibility module first.
I then selected ViPER4Arise 2.5.0.5, and didn't install anything else.
Click to expand...
Click to collapse
Sent from my Galaxy S8 using XDA Labs
benmeroff said:
So I've tried using the ARISE Magnum Opus 20170724 installer I had, but on any stock-based ROM it just bootloops the system. Which one works for you? I can see now I was several ARISE versions behind but would prefer not spend time waiting for my rather sizeable Nandroid to restore between testing versions if at all possible lol...
Sent from my Galaxy S8 using XDA Labs
Click to expand...
Click to collapse
i find flashing (smeejaytee - feelthebeats toolbox) from (ARISE+Deuteronomy+2.94+Modular+AROMA) fixes 9/10 issues faced after the magnum opus installation,
ive been using this method for a while now and not really had any problems, just a long winded process installing it all but havnt found A simpler method yet, hope this helps
Which versions of viper did you install? I have a lg g7 with snapdragon 845th in the magisk modules occur again and again sound problems with the volume. as described by a user here in the thread.
Sony92 said:
Which versions of viper did you install? I have a lg g7 with snapdragon 845th in the magisk modules occur again and again sound problems with the volume. as described by a user here in the thread.
Click to expand...
Click to collapse
I just tried flashing this and made sure to install the FeelTheBeats script that YZFR90 recommended in the Aroma installer, and after rebooting and disabling SELinux within Viper4Android settings (after enabling developer mode) it works perfectly for me on Magisk so far.
YZFR90 said:
i find flashing (smeejaytee - feelthebeats toolbox) from (ARISE+Deuteronomy+2.94+Modular+AROMA) fixes 9/10 issues faced after the magnum opus installation
Click to expand...
Click to collapse
OK thanks. because with the viper modules directly from magisk, i only have problems of sound and volume
install the zhuhang version via magisk
that is all
exocetdj said:
install the zhuhang version via magisk
that is all
Click to expand...
Click to collapse
I have only the problems with the volume and the bad quality.
benmeroff said:
I just tried flashing this and made sure to install the FeelTheBeats script that YZFR90 recommended in the Aroma installer, and after rebooting and disabling SELinux within Viper4Android settings (after enabling developer mode) it works perfectly for me on Magisk so far.
Click to expand...
Click to collapse
its not working.
the viper4arise apk crashes
Sony92 said:
its not working.
the viper4arise apk crashes
Click to expand...
Click to collapse
If you haven't already, I'd make sure any other V4A Magisk modules or APKs are all uninstalled, then try reinstalling just that ZIP.
Sent from my Galaxy S9+ using XDA Labs
Installation fails. ends with error 2xx
It may be that viper is not completely compatible with the snapdragon. I'm really restless. have already tried several versions
This appears to be the last working xposed version for the Note 4 using a 6.0.1 rom and the original version will no longer work with the latest version Magisk. This is that same version in an updated module.
I've only tested this on my SM-N910V running a modified stock rom so there's still some testing to be done but it's working well for me.
All credits belong to @rovo89 @wanam and @topjohnwu
xposed-v87.3-unofficial
xposed installer app for Magisk
Link to original thread
Link
I have Magisk installed correctly and I am on the latest version but when I go to install exposed 87.3 through TWRP or magisk I keep getting the same error message saying I need to be on version 14 or higher but I'm on like a version 18 of magisk any help would be appreciated
RedMan27 said:
I have Magisk installed correctly and I am on the latest version but when I go to install exposed 87.3 through TWRP or magisk I keep getting the same error message saying I need to be on version 14 or higher but I'm on like a version 18 of magisk any help would be appreciated
Click to expand...
Click to collapse
I just uninstalled and then reinstalled just to make sure there wasn't something new that was introduced in 18.1. Everything seems to be ok on my end. Try installing through the magisk manager again and press the <save the log> button at the bottom of the screen. Upload the log here and I'll take a look.
Hi!
Can it work with N910F?
gthomek said:
Hi!
Can it work with N910F?
Click to expand...
Click to collapse
Yeah it should work on all models. As long as you're using a 6.0.1 rom
kevintm78 said:
This appears to be the last working xposed version for the Note 4 using a 6.0.1 rom and the original version will no longer work with the latest version Magisk. This is that same version in an updated module.
I've only tested this on my SM-N910V running a modified stock rom so there's still some testing to be done but it's working well for me.
All credits belong to @rovo89 @wanam and @topjohnwu
xposed-v87.3-unofficial
xposed installer app for Magisk
Link to original thread
Link
Click to expand...
Click to collapse
First Post!
Using this on a 910T running a Stock Deodexed N910TUVU2EQI2 6.0.1 Rom.
Registered just to say thanks @kevintm78!
Jellypowered said:
First Post!
Using this on a 910T running a Stock Deodexed N910TUVU2EQI2 6.0.1 Rom.
Registered just to say thanks @kevintm78!
Click to expand...
Click to collapse
Hey! Welcome to the forum. Thank you for posting whether or not it's working for you. I had seen a few downloads but wasn't sure how it was working out.
link down
Possible to kindly reupload the files? Link for downloading not working.
xposed installer app for Magisk link is not working can u upload it plz also i installed xposed-v87.3-unofficial via magisk and used the XposedInstaller_3.1.5-Magisk.apk from [2019.5.1][Magisk] Systemless Xposed v89.3/v90.2-beta3 (SDK 21-27) and in the xposed installer it says xposed not installed and after some searching i found that /system/xposed.prop file had not been copied so i copied it manual and now in the xposed installer it says "xposed framwork version 87.3 is installed but not active. please check the logs" and in the logs it says "Cannot read log/data/de.robv.android.xposed.installer/log/error.log: open failed: ENOENT (No such file or directory)" what seems to be the problem can anyone help me ?