Hello.
I bought a Spigen Neo Hybrid case and Anker TPU screen protector.
I installed the screen protector (perfectly, no bubbles) and I was happy and satisfied. That was till I put the case on. The case peeled the screen protector off at the edges leaving for a very ugly look.
So my question is, does anybody know of a glass/TPU screen protector that goes nicely with my case? Preferably one that covers as much of the screen as possible without hindering the case.
Best regards.
I have used Spigen Crystal and Spigen Curved Crystal screen protectors with the Neo Hybrid.
With the regular Crystal, I had no peeling at all (but I didn't like the protector because it scratched easily and had a slight rubbery feel..but no peeling at the sides).
With the Curved Crystal, I had one that got dust underneath that I left on for a week, and no peeling. Besides from the dust, the application was perfect, and had no rubbery feel and looked great. However, I took that one off, and I have tried a couple more Curved Crystal protectors that peeled at the edges a bit, because I did not centre it perfectly.
So if you can get it on perfectly, the Curved Crystal from Spigen (Orange box) might do the trick:
https://www.amazon.ca/Protector-Spigen®-Coverage-Lifetime-Warranty/dp/B01AIWCM8W
If you don't mind a slight rubber feel, this Spigen Crystal (blue package) will do the trick:
https://www.amazon.ca/Protector-Spi...=1465058744&sr=1-6&keywords=spigen+s7+crystal
chriskwarren said:
I have used Spigen Crystal and Spigen Curved Crystal screen protectors with the Neo Hybrid.
With the regular Crystal, I had no peeling at all (but I didn't like the protector because it scratched easily and had a slight rubbery feel..but no peeling at the sides).
With the Curved Crystal, I had one that got dust underneath that I left on for a week, and no peeling. Besides from the dust, the application was perfect, and had no rubbery feel and looked great. However, I took that one off, and I have tried a couple more Curved Crystal protectors that peeled at the edges a bit, because I did not centre it perfectly.
So if you can get it on perfectly, the Curved Crystal from Spigen (Orange box) might do the trick:
https://www.amazon.ca/Protector-Spigen®-Coverage-Lifetime-Warranty/dp/B01AIWCM8W
If you don't mind a slight rubber feel, this Spigen Crystal (blue package) will do the trick:
https://www.amazon.ca/Protector-Spi...=1465058744&sr=1-6&keywords=spigen+s7+crystal
Click to expand...
Click to collapse
Thank you very much. I ordered the Curved Crystal. I was using Anker which is a great screen protector on its own but doesn't go well with the Spigen Neo Hybrid. And I love this case so I'd rather get a screen protector that just fits.
Hi,
Comments on Amazon are not very good for the Spigen screen protection...
I've also a Neo Hybrid case and still looking for a good screen protection...
This one worked for me for both the Spigen Neo Hybrid and the Tudia Ultra Slim cases.
https://www.amazon.com/gp/product/B01DCR1ZR4/ref=od_aui_detailpages01?ie=UTF8&psc=1
Related
I picked up the realook protector, and love it. it covers the screen perfectly (really) and looks and feels like the original glass. problem is the verizon high gloss tpu case i bought for the phone last weekend causes the edges of the protector to lift up when the case is squeezed even slightly.
is anyone using the amzer case with a protector? does this work better?
http://www.amazon.com/gp/product/B00691RJ80/ref=oh_o04_s00_i01_details
tspderek said:
I picked up the realook protector, and love it. it covers the screen perfectly (really) and looks and feels like the original glass. problem is the verizon high gloss tpu case i bought for the phone last weekend causes the edges of the protector to lift up when the case is squeezed even slightly.
is anyone using the amzer case with a protector? does this work better?
http://www.amazon.com/gp/product/B00691RJ80/ref=oh_o04_s00_i01_details
Click to expand...
Click to collapse
This made me lol. This is one of the only reasons I don't use a tpu case on my phones. I know the cheaper ones usually don't wrap as tightly and don't go over the bezel as much, making it so they don't touch the edges of the screen protector. I've never tried that one but from what I remember the Diztronic ones don't mess the protector up.
I recently got my note 3 and need to protect it properly. I got the iloom flexible glass screen protector and have been looking at a few options for a case:
- samsung original flip wallet (expensive!)
- spinge neo hybrid case - which i think i prefer for being sober, slim and seems sturdy
- Feel free to suggest a nice quality case - slim, non obtrusive.
But i have a doubt if the spinge case wont damage the screen protector on the edges. Saw a review of the neo hybrid (i think its the one on the spinge website) and the reviewer's note3 had that screen protector problem, a little damage on the edges because of the case - it lifts the screen protector a bit.
Do any of you have any problems like these with the neo hybrid? I assume it all depends on the screen cover, on how much surface it covers and if it gets tucked below the cover.
Anyway, please feel free to give me your feedback and opinions. They are very welcome.
Thanks
I have the Spigen bounce. Love it. The neo hybrid is nice but the outer plastic can crack if it hits the corner when it falls.
mikemq2003 said:
I have the Spigen bounce. Love it. The neo hybrid is nice but the outer plastic can crack if it hits the corner when it falls.
Click to expand...
Click to collapse
Seems very nice also. I somehow missed it when i was browsing the cases. And do you have a screen protector? Does the case mess with the screen protector?
I do. I have a tempered glass protector with the spigen bounce. No problems with it. It won't mess with film protectors either. This is the case with my protector. Page 64 closer towards the bottom of page.
http://forum.xda-developers.com/showthread.php?t=2441894
Great feedback. Thank you guys. I just ordered my spigen bounce case from amazon and cant wait for it to get here.
Again, thanks for everything.
manifesto42 said:
Great feedback. Thank you guys. I just ordered my spigen bounce case from amazon and cant wait for it to get here.
Again, thanks for everything.
Click to expand...
Click to collapse
Awesome! Enjoy your case. You will love it.
Otterbox defender, punched out the plastic screen protector and installed a mime feather tempered glass screen protector. Doesn't get any better... In my opinion.
Sent from my NOT3
http://www.amazon.com/Caseology-Sam...d=1386577863&sr=8-1&keywords=caseology+note+3
i have the iloome flex screen protector as well with the case above. Fits PERFECTLY! looks good too.
I am looking for one as I have a dbrand skin on my phone (they are great ), most screen protectors are mostly for the whole front part.
Buy a normal screen protector and cut it how you want
I've been looking for one as well, for the same reason. No luck so far. Slickwraps usually include such a screen protector with their orders, but I've no idea how it would perform on our "2.5D" screen. It's also probably not worth ordering a set of skins just for the very average PET film.
danieleporu said:
Buy a normal screen protector and cut it how you want
Click to expand...
Click to collapse
The edges won't stick, you'll get a "halo" effect, dust will get in, etc.
You *could* try something from Skinomi, though. I know their wet-apply protectors stick really well on curved glass (I swore by it back in my HTC One X days). You could either try to cut it down to size, if you have such precise tools, or even just stick the whole thing over your skin, it'll probably be fine. Plus you get protection for your nice skin.
I am in the same boat. I'm getting a skin for mine and want to still be able to protect my screen.
Yesterday I received i-croo full screen protector and I think it's the best protection available today. This type of PET must be combined with proper case like Ringke Slim to avoid peeling on edges.
I-Croo fullscreen protector:
http://www.ebay.com/itm/36152666338...49&var=630914327414&ssPageName=STRK:MEBIDX:IT
Ringke Slim:
http://www.ebay.com/itm/26229847133...49&var=561063631103&ssPageName=STRK:MEBIDX:IT
HERE IS VIDEO HOW IT LOOKS:
https://www.youtube.com/watch?v=8dNkMydF-pM
flax said:
Yesterday I received i-croo full screen protector and I think it's the best protection available today. This type of PET must be combined with proper case like Ringke Slim to avoid peeling on edges.
I-Croo fullscreen protector:
http://www.ebay.com/itm/36152666338...49&var=630914327414&ssPageName=STRK:MEBIDX:IT
Ringke Slim:
http://www.ebay.com/itm/26229847133...49&var=561063631103&ssPageName=STRK:MEBIDX:IT
HERE IS VIDEO HOW IT LOOKS:
https://www.youtube.com/watch?v=8dNkMydF-pM
Click to expand...
Click to collapse
We are looking to cover just the screen though. Not the entire front. We have skins that cover everything on the front but the screen.
Put on a full coverage screen protector.
A wet install one would work the best.
If not a wet install, one like the Spigen Curved Crystal is excellent.
Then apply the front skin directly on top of the protector.
I did this for a while and it worked perfectly with the Spigen Curved Crystal.
The skin actually stuck well to the protector, and the corner cutouts of the protector allow the skin to stick to the screen directly and hold the protector down better.
Here is the amazon link for the Spigen protector, only $8.99 for a 2 pack right now.
http://www.amazon.com/Protector-Spi...2930919&sr=8-4&keywords=spigen+curved+crystal
flax said:
Yesterday I received i-croo full screen protector and I think it's the best protection available today. This type of PET must be combined with proper case like Ringke Slim to avoid peeling on edges.
I-Croo fullscreen protector:
http://www.ebay.com/itm/36152666338...49&var=630914327414&ssPageName=STRK:MEBIDX:IT
Ringke Slim:
http://www.ebay.com/itm/26229847133...49&var=561063631103&ssPageName=STRK:MEBIDX:IT
HERE IS VIDEO HOW IT LOOKS:
https://www.youtube.com/watch?v=8dNkMydF-pM
Click to expand...
Click to collapse
could you please post some photos without the case? thanks
Milimbar said:
Put on a full coverage screen protector.
A wet install one would work the best.
If not a wet install, one like the Spigen Curved Crystal is excellent.
Then apply the front skin directly on top of the protector.
I did this for a while and it worked perfectly with the Spigen Curved Crystal.
The skin actually stuck well to the protector, and the corner cutouts of the protector allow the skin to stick to the screen directly and hold the protector down better.
Here is the amazon link for the Spigen protector, only $8.99 for a 2 pack right now.
http://www.amazon.com/Protector-Spi...TF8&qid=1462908151&sr=8-1&keywords=B01CUQ9Z7A
Click to expand...
Click to collapse
I had considered that. Obviously it would stick to a glass protector, but any experience with applying a skin to a wet apply protector? I only ask because I'm not sure I'm sold on using a glass one on the curved screen. Also, thanks for the link!
dragunbayne said:
I had considered that. Obviously it would stick to a glass protector, but any experience with applying a skin to a wet apply protector? I only ask because I'm not sure I'm sold on using a glass one on the curved screen. Also, thanks for the link!
Click to expand...
Click to collapse
The glass protectors for the S7 Edge are ALL horrible, do not use them.
The Spigen Curved Crystal is a curved PET protector, it actually fits the phones really well.
There was some problems with the initial batch of protectors but that has been fixed and now they are perfect.
Milimbar said:
The glass protectors for the S7 Edge are ALL horrible, do not use them.
The Spigen Curved Crystal is a curved PET protector, it actually fits the phones really well.
There was some problems with the initial batch of protectors but that has been fixed and now they are perfect.
Click to expand...
Click to collapse
I wonder if I could stick the skin over one of those. I'm thinking with a hair dryer it might be possible.
dragunbayne said:
I wonder if I could stick the skin over one of those. I'm thinking with a hair dryer it might be possible.
Click to expand...
Click to collapse
Over the Spigen protector?
That is exactly what I was saying to do, it works perfectly.
I have the Metropolis and Plasma UAG cases and I want to find a good screen protector that doesn't come up at the edges.
Not fussed on tempered glass as the cases are good enough for me, I just want a screen protector to stop any little scratches appearing on the screen from use.
I've tried the Spigen liquid protector and its just a little bit too long, fine on the edges but not in length
I had the same prob with 3 different wet apply protectors.
Only thing i got to work was a full cover TP and had to pull the top and bottom of the case over the glass. Worked very well.
Whitestone dome works on my uag plasma and uag monarch.
Is the included clear case tempered glass screen protector friendly, or does it lift it up from corners? Any recommendations for screen protector? And if that included one is no good, also recommendation for clear case is appreciated.
im using the MOFI full screen tempered glass screen protector with the factory case without issue.... just too bad the MOFi looks like a oild slick in the middle of the screen otherwise it would be perfect
I bought a Spigen case which is, as usual, nice and protective.
For the tempered glass, i bought a Force Glass ($$$) which is really nice to touch without fingers trails, but finally it's ****. Like all the S8/S9 (not dome glass) it's only glued with the edges and not very well, so it'll become dirty fast . And if you look at it under a bright sun you don't see anything.
I don't recommend to buy this "way too expansive" Force glass! I regret it! 2$ glass will do a better job.
Am I not right in thinking this phone comes with a screen protector already on it.? Mine looks like it does, obv don't want to try and take it off in case it is one lol... Came with a clear case too
Cheap tempered glass + clear case (Huawei case)
I used the clear case which came with the phone as for tempered glass I used a cheap (£1.99) from eBay.
The tempered glass covers the screen almost perfect. It isn't edge to edge, but it is wide as the screen.
The glass hasn't got a good oleophobic coating, but is better than the plastic one and has adhesive on entire surface. (i would add a photo but I've got no clue how?
Hi all, is there any spigen neo hybrid alternative for Huawei P20 Pro?
Hi, any issues getting the tempered glass on with the Spigen case? Thanks
RubyRP62 said:
I bought a Spigen case which is, as usual, nice and protective.
For the tempered glass, i bought a Force Glass ($$$) which is really nice to touch without fingers trails, but finally it's ****. Like all the S8/S9 (not dome glass) it's only glued with the edges and not very well, so it'll become dirty fast . And if you look at it under a bright sun you don't see anything.
I don't recommend to buy this "way too expansive" Force glass! I regret it! 2$ glass will do a better job.
Click to expand...
Click to collapse
I've applied Zabra tempered glass (Amazon purchase) without any bubbles but after applying the Huawei clear case, edges came out, disabling my screen touch features.
Highly not recommended to buy this "Zabra full glue 9H tempered glass screen protector"
On of the best tempered glass for P20 PRO is Nillkin the hall series..
I have try Nillkin amazing H (3mm cover real screen leave 2mm at the edges case friendly) Nillkin amazing H+ (2,6mm cover real screen leave 2mm at the edges case friendly best clarity) & Nillkin CP-MAX 3D (3mm Full Cover edge to edge full adhesive full glue)
They are all fit perfect with excellent fit & clarity
No bubbles, no rainbow effect, no halo effect, no dot matrix, no fingerprints
I prefer CP-MAX 3D for full protection with original clear silicone case or ipaky case
I have bought the Spigen tempered glass screen protector and Spigen Ultra Hybrid Crystal Clear case recently
those side adhesive screen protectors suck!!!
whitestone is loca based and because of that full adhesive and it will be released in a week or so on amazon. great feel to the proctector, just like the original screen, no 3d dot matrix, no problems with touch sensitivity, almost no fingerprints and if they are gone with one wipe and so on.
i will get it asap since it's doing fantastic on my note 8 for over 9 months now.
i got the spigen rugged armour and i love it. Feels great in your hands. its like velvety soft. Using this with the stock screen protector, which i feel is sufficient for me
i just wish spigen released the ultra hybrid clear case with a built in kickstand for this phone.
I've never used a protector on my previous phones but opted for the Spigen and think it's great. Had it in five days now, doesn't get too messy from fingerprints and only issue with haloing was my fault, had to take it off a couple times as I want happy with how I put it on. Used it in direct sunlight and was amazed, after one Samsung and two Sony's I can actually read my phone outside"
TheRedIndian said:
I have bought the Spigen tempered glass screen protector and Spigen Ultra Hybrid Crystal Clear case recently
Click to expand...
Click to collapse
I bought the Spigen Slim Armor case ( £15 ) and Spigen Tempered Glass ( about £8 ) and am very happy with both. I moved from Otterbox a few years ago when I couldn't see a decent case that I liked. I've had 4 Spigen cases for various phones so far and have never been let down to date
ESR products for me fits perfectly
It looks like there are not much good options for this phone (compared to my last one), I have ordered the spigen ultra hybrid (transparent) & tempered glass combo.
I'll post photos with the result
Do some regions not get an included case? I just bought this device yesterday in Canada and there was no case with it.
Spigen crystal clear case and Nillkin Amazing H+ for tempered screen. Trust me, this glass protector is the only one I have found to not retain fingerprints and to stick perfectly and evenly on the 20 pro. If you correctly align it with the edges of the screen, there will be no air pocket whatsoever. It's impressive.
Anybody know the brand of this screen protector and where I can get one? I'm most interested because, well, it's full screen and not just adhesive around the edge. But also the guy mentioned it works with the case I'm going to be using ( UAG ) .
https://www.youtube.com/watch?v=FymSOb_3vOs