My display was broken so I had to buy a new display and bought it along with the side frame. It's perfect but there's one problem-- the screw holes are kinda not in perfect size so none of the 16 screws fit in tightly. They are just somehow screwed in, holding the inner back cover with the sideframe. I'm afraid that if the phone falls, the inner back cover might rip off the sideframe and display assembly and totally rip apart damaging the motherboard, etc.
Since the screws aren't holding the phone tightly in place, I wanna take some measures so as to prevent it from ripping off incase of a fall. I applied very little amount of super glue (fewikwik, popular in India) at two places. But I DO NOT want to use super glue further around the frame because it'll become impossible to remove the inner back cover in future.
My question is, is there any sort of "super glue" available that stick things (plastic here) very firmly but can be removed as well when needed? You can say I am looking for something stronger that typical fevicol but less stronger (and not permanent) than super glue (fewikwik).
you're looking for glue on XDA.
-z3r0- said:
you're looking for glue on XDA.
Click to expand...
Click to collapse
It's related to phone repair and I didn't wanna sign up at a new place for asking this.
Related
the lens on my back cover cracked when dropped a while back, and to get a good photo i now have to remove the back cover to get the obstruction off... is there anything i can buy short of a whole new back cover? all i need is a sticky piece of glass like the one that comes on the original cover...
thanks!
Why don't you just take a piece of plastic and work on it with sandpaper? You could even use some cd jewel case. The material is usually fragile but if you make a cut on its surface with a sharp knife it will tend to brake along this line. So it's fairly easy to break it down to a rectangular shape roughly the size of the camera cover and work with sandpaper or a file until you have a proper shape. Putting some sticky paper cut to shape of the cover on the plastic (preferably on both sides) will help in achieving the proper shape and will protect the surface from scratching.
Just look around the hose and be creative - i'm sure you'll be able to find a piece of clear, non-scratched plastic somewhere If you feel that the cd-case plastic will be too soft and will scratch too easily you could apply a piece of screen protector to it. It sure isn't worth buying a new screen protector just for that but if you already have one on your phone you could use a piece of it to protect camera cover and get a new one for the screen
As for attaching the cover to g1 back cover, there are many ways ranging from glues to double-sided sticky tapes. Use whatever you have at your disposal (just stay away from cyanoacrylate adhesive aka super glue - its vapor will ruin the transparent plastic).
a new back cover is cheap, like $6.
Camera Lens
jnagar said:
the lens on my back cover cracked when dropped a while back, and to get a good photo i now have to remove the back cover to get the obstruction off... is there anything i can buy short of a whole new back cover? all i need is a sticky piece of glass like the one that comes on the original cover...
thanks!
Click to expand...
Click to collapse
what is your phone model? Different phones have different camera lens with varied shape. A camera lens can not be just replaced by a plastic stuff as the guy said above and it is a prttey tough thing to shape the plastic. an original camera lens does not much. It may be no more than $1。
Refer to the following thread where a person used a spray on material to create a soft touch battery door for a Nexus S. I wonder if this could be used on the rear cover for protection?
http://forum.xda-developers.com/showthread.php?t=881062
Cool idea. Most hardware stores I've been to have it, but its not always in spray form. I wouldn't mess with the dip stuff (often used for keys, tools, etc.) I might have to pick some up myself. Comes in some different colors as well sometimes.
I've had a key on my keychain that has been dipped and after 3yrs its almost ready to come off completely. Of course, I only used it to tell them apart.
I did it. Edit: Finally got the photos up.
I took the four screws off and removed the back panel. Used four small pieces of painters tape to cover up the screw holes, but actually let the rubber go underneath so the sides of the corners were covered and continuous as much as possible.
I put about five or six coatings on. Only bad part is that you need to wait 30+ minutes between coatings. I let it off gas a little before putting it all back together. It does stink a little, not headache inducing though, at first. After about 12hrs it just smells like rubber and isn't noticeable.
$7.50 or so at Lowe's for a can. I did this and a phone and there is still some left in it I believe.
Like the Nexus post says, it works best if there are few noncontinuous parts of the rubber to get snagged on things. This was part of the reason I removed the case.
No responsibility for messing yours up, etc. etc.
vsc said:
Refer to the following thread where a person used a spray on material to create a soft touch battery door for a Nexus S. I wonder if this could be used on the rear cover for protection?
http://forum.xda-developers.com/showthread.php?t=881062
Click to expand...
Click to collapse
This looks sweet vsc. I like my carbon fiber rear cover, but a soft rubberized grip would definitely be better.
Just added some photos up above. I forgot to add that the back case goes on just as easy as it came off. Buttons still work, and the little door still opens correctly. It *almost* looks like it could have come this way. Its actually thin enough you can still see a slight bump from where the sticker for the serial number is (not in the pictures though, sorry). I think it looks a bit better now than having all those extra words on the back of the case. My case had already started to get rather scratched up even when I was careful.
I'll try to update on durability if it starts to look bad.
One other thing. My corners don't look the greatest because the first time I did it I let it dry with the corner tape on and then had to exacto knife the plastic and tape off once it had dried. I think it would do better if you made nice rounded tape areas, or just bought some rounded stickers or something. But definitely put them on lightly and take them off between each coat so the corners dry without the tape/stickers.
Hello,
Have any one noticed that the Droid RAZR surrounding plastic border, at the back, color gets dim from putting it on your desk or table. It's not very obvious, you wont see it except in strong light, but it's obvious enough to bother me every time I look at my RAZR
I have attached a pic I found online which has the same problem as mine and I highlighted the scratched or the dim parts on the plastic border.
Is there a fix for these scratches?
What were you thinking in, Motorola. Why didn't you choose a stronger material around the phone, I mean you did a great job by choosing gorilla glass to protect the display and Kelvar fabrics on the back, and the coating which protects the internal body parts. Yet you made the material which gets the most damages and is highly vulnerable out of plastic...
If you ever owned an iPod with a stainless steel back you'd know that being plastic or metal won't change the eventual appearance of fine scratches. Glass stays shiny and doesn't scratch as easily, but we all saw the crap people gave Apple for making the back of their phone out of that.
I doubt that the scratches can be removed even if they could be you're just going to get them back by putting the phone on your desk again. If you have to go out of your way to look for it under a strong light, it sounds like you either need a case, a hobby, or both.
There actually is a method for removing scratches:
1. Fine grain abrasive paper
2. Abrasive paste
But that will eliminate the paint on your backplate and you should re-paint it with an acrylic paint (like spray paint).
If you're so brave to do that...well..do it...but consider the idea of taking your RAZR as it is and to not put it directly on your desk but like me, put it on its pouch.
The fact that it's going to be scratched is absolutely normal... it's a phone..!
The coolest thing you can do would be to take out the back plate and sent it to a powdercoater. That's what I would do but I think it will mess up the warranty. it would be so cool though.
Isn't it an excess to powdercoat it?
Hey probably in 1 year you won't have it anymore xD
....But I have to admit it would be cool.
Can't polish and compound fix it?
The ones I use for my car =D
mzaza said:
Hello,
Have any one noticed that the Droid RAZR surrounding plastic border, at the back, color gets dim from putting it on your desk or table. It's not very obvious, you wont see it except in strong light, but it's obvious enough to bother me every time I look at my RAZR
I have attached a pic I found online which has the same problem as mine and I highlighted the scratched or the dim parts on the plastic border.
Is there a fix for these scratches?
What were you thinking in, Motorola. Why didn't you choose a stronger material around the phone, I mean you did a great job by choosing gorilla glass to protect the display and Kelvar fabrics on the back, and the coating which protects the internal body parts. Yet you made the material which gets the most damages and is highly vulnerable out of plastic...
Click to expand...
Click to collapse
I have the same problem with my first Droid Razr. Then returned it to Verizon Wireless because I got the deal from Amazon.
And on second one, I put more care over that plastic bezel and put carefully a slice of transparent tape to cover it.
Though running at the risk of scratching the plastic bezel, I still let it run nakedly because it is the thinnest phone in the world and any cover will blow that title.
Mine scratched in the same places. I used car polish (Meguires Scratch X) to remove them. Just be gentle. I keep mine in my Casemate case now to prevent more.
That! One of the reason I moved from sgs2 because the plasticky body also collect the scratch at the same area (top and bottom). But it turned out razr metal body also can collect scratch... Geezz, i always put in my left pocket together with handkerchief, never ever put any coins or metallic substances near my phone....
And now, while i look closer to my screen, it too has collect two fine scratch line. Small, but i can see it. I think gorilla glass is way overhyped... As i wander around i also found this:
http://forum.xda-developers.com/showthread.php?t=1358493
p.s: can we sue corning? or those guys who hammered their gorilla-glassed phone on you tube with knife?
The title of your thread implies that you already have a fix. You should have it edited.
Otherwise just buy a dang cover/case for the phone or buy little soft towels for every spot you put it down...
Howdy all,
What size double sided tape should I use to stick my Asus TF201 digitizer and LCD back together? I have 3 options, a 1mm, 2mm and 3mm double sided tape. Not sure whats on it now, but if anyone has an idea I'd really appreciate it.
Thanks
Nightpath said:
Howdy all,
What size double sided tape should I use to stick my Asus TF201 digitizer and LCD back together? I have 3 options, a 1mm, 2mm and 3mm double sided tape. Not sure whats on it now, but if anyone has an idea I'd really appreciate it.
Thanks
Click to expand...
Click to collapse
I recommend not using any foam tape at all to stick the digitizer to the LCD. I thought there'd be light leaks if I didn't. There were no light leaks. I used double-sided scotch tape to stick the digizer to the front bezel. It worked very well.
If you *do* use foam tape to stick the LCD to the digitizer, you'll go ape-**** crazy if you notice any fingerprints or particles on the inside of the digizer. Without sticking the two together, you can easily separate the two if you need to.
So double sided scotch tape eh? Whats the difference, just easier to take apart if you have to?
Might be an idea, seems to be more of it around here and waaayyy cheaper
Would this be it (put in b0p 1n0 if it asks for a postal code)? : http://www.staples.ca/ENG/Catalog/c...191,4,6&name=CA_SK_SCOTCH+-+Double-Sided+Tape
here's another, says it's removeable tape so I don't think that's a great idea : http://www.staples.ca/ENG/Catalog/cat_sku.asp?CatIds=3,3191,4,6&webid=33734&affixedcode=WW
Here's mounting tape, would this work too you think? http://www.staples.ca/ENG/Catalog/cat_skuset.asp?CatIds=3,3191,4,6&name=CA_SK_3M+-+Mounting+Tape
And here's a tape of MC Hammer : http://www.youtube.com/watch?v=otCpCn0l4Wo
LOL on the MC Hammer!
On the mounting tape, keep in mind that the Prime's display has two types of mounting tape. The digitizer glass is affixed to the plastic bezel with very thin (and very sticky) double-sided celophane type adhesive. Then, the LCD is affixed with black foam tape (and screws). i used the Scotch tape to stick my digitizer to the bezel. This had the advantage of being very easy to trim with an exacto. I chose not to use any foam tape at all with the LCD and just rely on the screws to hold it in place. I was needlessly worried about light bleed. It did not. It was fine.
By not using foam tape, I had the HUGE advantage of being able to later remove a tiny speck of debris that got sandwiched between the LCD and digitizer. It was very small, but drove me nuts. If I had used foam tape to mount the LCD, the risk of breaking the damned thing again would have been too great to try removing the speck. It'd still be there.
I highly recommend not using any foam tape. At least try without first. You can always add it later if your heart is set on it. I've read other threads where folks ended up breaking the digitizer or LCD when having a foam-tape malfunction (stuck to the wrong spot, wasn't lined up right, etc.).
I don't use cheap tape or scotch tape (3m) as generally it's not sticky enough for most jobs like this.
I highly recommend mammoth tape for this job. https://www.google.co.uk/search?q=m...AW81oG4Bg&sqi=2&ved=0CFoQrQQ&biw=1067&bih=693 don't get the one with the cloth membrane (labeled as Heavy duty double sided tape) as its too thick and very hard to cut, the one you need is labeled "multi purpose double sided tape".
I get it from a builders merchants but you can get it online. I have tried many brands and alternatives but mammoth is the best stuff I have found.
Ultimately folks can do whatever they want and feel comfortable with. I would council any close friends to just go with the double-sided Scotch tape to stick the digitizer glass to the bezel. It's plenty sticky enough and there's enough (around 1m total perimeter) that you get a good stick. BONUS: It's good and cheap.
With as fragile as the digitizer glass is, you really don't want to screw around with ridiculously sticky adhesives. On the likely chance (unless you're a pro) that you don't set the glass in the bezel just right, highly sticky adhesive is going to make repositioning much harder and you may very well break the new glass trying to reposition.
I highly recommend not using any adhesive at all to hold the LCD to the digitizer for the reasons I've already mentioned. You'll really wish you hadn't.
Jgrimoldy said:
Ultimately folks can do whatever they want and feel comfortable with. I would council any close friends to just go with the double-sided Scotch tape to stick the digitizer glass to the bezel. It's plenty sticky enough and there's enough (around 1m total perimeter) that you get a good stick. BONUS: It's good and cheap.
With as fragile as the digitizer glass is, you really don't want to screw around with ridiculously sticky adhesives. On the likely chance (unless you're a pro) that you don't set the glass in the bezel just right, highly sticky adhesive is going to make repositioning much harder and you may very well break the new glass trying to reposition.
I highly recommend not using any adhesive at all to hold the LCD to the digitizer for the reasons I've already mentioned. You'll really wish you hadn't.
Click to expand...
Click to collapse
That's what I was thinking. My LCD was slightly cracked on the edge, but not noticeable. With the 2 sided Scotch tape ($5 here) if it breaks again I can replace it without totally busting the LCD. And if it's sitting in a decent case the screen is going to be reinforced anyway.
Nightpath said:
That's what I was thinking. My LCD was slightly cracked on the edge, but not noticeable. With the 2 sided Scotch tape ($5 here) if it breaks again I can replace it without totally busting the LCD. And if it's sitting in a decent case the screen is going to be reinforced anyway.
Click to expand...
Click to collapse
I'm not sure going without the foam is the right thing in all instances. I'm working on a Casio G'Zone Commando, replacing the digitizer, and noticed that the digitizer will only work accurately if it is elevated slightly more than if it just sits on the frame where the foam tape was at. I can't tell if the digitizer is just wonky or if the slight elevation caused by the foam tape is needed with this phone.
I've only had my v30 for a week and I dropped it in the back glass shattered the worst shatter is in the corner and it's small but it looks pretty deep so I was wondering if it's okay if I filled it witg super glue to try to make my phone waterproof again
use some elastic glue which do not melt plastic or a strong dual side adhesive tape
A 2-part epoxy would fill in the gaps and give you plenty of time to spread it evenly before it sets. Super Glue sets really quickly, isn't flexible and can make a mess.
ED2O9 said:
A 2-part epoxy would fill in the gaps and give you plenty of time to spread it evenly before it sets. Super Glue sets really quickly, isn't flexible and can make a mess.
Click to expand...
Click to collapse
in case you need to open the phone again will you be able to remove the cover if you will use epoxy?
Really, your best option is to just replace the back glass. Kits sell for less than $20 on Ebay and Amazon, and they include the adhesive. The toughest part is of the replacement procedure is not cracking the original glass, but yours is already shattered so that's not a concern. It would look good as new and retain water resistance (assuming you do a good job with the installation).