Hello,
I have tried to root my tablet and I have failed it and now it looks like I have even broken the bootloader, so if I press the power and the volume-up button then nothing happens. When I start the tablet with pressing just the power button, then an automatic restarting loop begins (I see intel logo, asus logo and the broken android logo and after that the tablet restarts and the same happens again). Is there anything what I can do or is my tablet totally broken now?
gyurix said:
Hello,
I have tried to root my tablet and I have failed it and now it looks like I have even broken the bootloader, so if I press the power and the volume-up button then nothing happens. When I start the tablet with pressing just the power button, then an automatic restarting loop begins (I see intel logo, asus logo and the broken android logo and after that the tablet restarts and the same happens again). Is there anything what I can do or is my tablet totally broken now?
Click to expand...
Click to collapse
Please help me, when the android icon appears then I can access adb, but it's just 1-2 second. Can you tell me how can I disable the automatic reboot and use some adb commands to reset the factory ROM? I would really appreciate your help, please answer
Related
I installed CWM initially, but it never rebooted automatically after installing. I rebooted it manually and all hell broke loose. The only way that I can start g tab now is if I use nvflash. Once I got the system working, I tried shutting down and then getting into CWM again, but a no go. It doesn't even start regularly, with just the power button being pressed. Any advice?
It turns out that I am stuck in the APX mode all the time. If I press just the power button, the APX mode comes on. How can I get out of it?
another topic (SOUNDS LIKE SAME PROBLEM)
aboy7 said:
It turns out that I am stuck in the APX mode all the time. If I press just the power button, the APX mode comes on. How can I get out of it?
Click to expand...
Click to collapse
Try this thread I think they have the same issue..
http://forum.xda-developers.com/showthread.php?t=903684
Other wise of course there is always NVFLash
http://viewsonic-gtablet-for-dummies.webs.com/nvflash.htm
Hello everyone.
Searching the forum I couldn't find a similar problem
I have installed the Rom Manager, and installed the CWM recovery Rom manager that is required. When I clicked the Backup Current ROM, that's when my problems started. Tablet reboots, turned on the screen as if it will boot and then shuts down. From that moment have I never managed to get further than the black screen.
I tried to connect tablet to the computer and enter the APX (press and hold, vol- and power button, or vol+ and power button or press and hold BACK and power button), but the computer does not recognize tablet at all. No birds, just nothing, screen just power up, and than shut down...
I even tried opening the tablet and removing the connector from the battery, but that didn't work too...
Has anyone had similar experiences and if anyone has an idea how to fix it?
[Android Tablet Issue] Acer Iconia A1-810 - 1st freezing, 2nd "erasing" screen
Hi,
My tablet Acer Iconia A1-810 (with KitKat version, not rooted) was freezing all the time and I make a normal factory reset from settings. The problem continued to appear and I decided to make a hard factory reset using tablet buttons. After confirm "yes, wipe all data", the tablet start to show a screen with the android logo and saying "erasing...". It's been 3 days now and nothing changes. Not even when I press the reset button and turn on the device that screen appears again.
I've tried to remove (unplug) the battery and plug back in; Tried to get back to recovery mode (power button + volume up) but keeps to show that screen; Any action becomes useless... Nothing works.
Maybe a complete rom flash would do it? But... How to do it if none action on buttons does something?
Any solution?? Thank you for any response!!
genn2 said:
Hi,
My tablet Acer Iconia A1-810 (with KitKat version, not rooted) was freezing all the time and I make a normal factory reset from settings. The problem continued to appear and I decided to make a hard factory reset using tablet buttons. After confirm "yes, wipe all data", the tablet start to show a screen with the android logo and saying "erasing...". It's been 3 days now and nothing changes. Not even when I press the reset button and turn on the device that screen appears again.
I've tried to remove (unplug) the battery and plug back in; Tried to get back to recovery mode (power button + volume up) but keeps to show that screen; Any action becomes useless... Nothing works.
Maybe a complete rom flash would do it? But... How to do it if none action on buttons does something?
Any solution?? Thank you for any response!!
Click to expand...
Click to collapse
I wonder if you were able to find any solution, because i have the same problem. I can get into the recovery mode pressing power + volume up. You have to try when the table is going to reboot; not always work but it load recovery mode sometimes.
HELP! Blue Wave 8 33GT tablet stuck in recovery mode with "No command" message
I got my Blue Wave 8 33GT (not HD+) tablet completely bricked. First of all, I know this is not really a popular device and some of you might not have a single knowledge about this one, but I hope in any way you might help me get this device working again. Thank you in advance!
Some info about this device:
Bluewave's website: Wave 8
Android OS version: 4.4 KitKat
Device processor: Rockchip-based (RK31)
What just happened? It suddenly reboots while I'm playing and gone into recovery mode with an Android and a "No command." message. Now it won't boot the system anymore whenever I reboot, it always going into this recovery mode.
It has no volume buttons, just a reset, a hard back button and power button. Holding down the power and back button goes into the recovery mode directly. Through normal boot, it flashes the Bluewave logo twice then goes into the recovery. While the reset button immediately turn the device off. There's nothing else I can think of that I can do in this case.
My laptop can recognize it as an ADB Device in recovery mode and I think I may be able to flash it via Rockchip BatchTool, but the instructions I've read states that the device should be up and with a USB debugging enabled which I am not currently able to do in recovery mode. Device is rooted and working totally fine until this happened.
Anyone got into this kind of problem and able to go through it? Please, any help is greatly appreciated.
P.S
Just let me know if there are any additional info I could give you.
What about hard reset.
May be this link help: https://drfone.wondershare.com/reset-android/hard-reset-android-without-volume-buttons.html
AutomaticSearches said:
What about hard reset.
May be this link help: https://drfone.wondershare.com/reset-android/hard-reset-android-without-volume-buttons.html
Click to expand...
Click to collapse
Hey! Thanks for your reply and time.
I tried every combination of either of the two keys but there is no such recovery menu showing up, and I am pretty sure that this device doesn't have a built-in recovery for factory reset.
If only I could go to its download mode stuff to be able to flash the firmware...
Humble Potato II said:
Hey! Thanks for your reply and time.
I tried every combination of either of the two keys but there is no such recovery menu showing up, and I am pretty sure that this device doesn't have a built-in recovery for factory reset.
If only I could go to its download mode stuff to be able to flash the firmware...
Click to expand...
Click to collapse
May be this site help: http://bluewave-global.com/wave_8.php#frame4
"Long press the power button to restart the device. If restarting fails, hard reset the tablet by poking the Reset hole using a pin. " it is from FAQ
maybe this could help.
1. Press the power button to get the option menu for
Power off
Reboot
Silence phone option.
2. on that menu you have to hold down that power off option on your touch screen while also holding down the home push button on the side of your tablet.
3. This brings up a screen to reboot into safe mode..(these are the 3 steps the company does not tell you that is why no one gets it to work.
4. HIt yes for safe mode and then hold down your power and home buttons on side of tablet till the dopo Logo appears.
5. Release both buttons and hit the power button one time and then hold only the home button down till a menu option appears.
6. Use the home button to move down to factory reset and press the power button to select. Once it says complete then use the power button to select reboot.
Problem solved. Hope this will help everyone out.
The only way is to remove the battery, attached again the battery then power it on their is no hard reset on blue wave the go to settings factory reset
sm-t870 unlocked/rooted stuck in bootloop
cannot enter recovery or download mode, or even seem to shut the tablet completely off.
any combination of buttons turns the tablet on with the message "bootloader is unlocked press power key to continue"
so holding power+volUP, must be let go to press power which seems to interrupt the button combination
power+volDOWN seems to shut the tablet off for 5 seconds but it automatically turns back on.
having plugged into laptop seems to make no difference.
help!
Hi man, have you fixed this issue? I'm having the exact same problems as yours. I updated my Magisk it just went bootloop.
Thanks!
Plug into PC then Power+Volume Up got me into recovery mode