How do you guys mount the USB port in your car or did any of you guy bought an adapter to mount flush on the dash? If you have done anything custom or where do you mount it, can you please post some pics?
llaugerm said:
How do you guys mount the USB port in your car or did any of you guy bought an adapter to mount flush on the dash? If you have done anything custom or where do you mount it, can you please post some pics?
Click to expand...
Click to collapse
I was never able to get USB stick working with both front nor back USB ports. I think I read somewhere around that you may need additional USB hub with power supply (as power in USB ports is weak). Didn't bother to try as I have two SD card slots so I use them for file storage.
I would also like to know if anybody uses USB.
llaugerm said:
How do you guys mount the USB port in your car or did any of you guy bought an adapter to mount flush on the dash? If you have done anything custom or where do you mount it, can you please post some pics?
Click to expand...
Click to collapse
I bought one of these to extend the two usb sockets on the back of my unit. Underneath the centre armrest in the E46 BMW there is an oddments tray. I drilled a hole and secured the USB sockets at the back of the tray facing forwards.
https://www.amazon.co.uk/Truck-Dashboard-Flush-Female-Extension/dp/B00XJDP12W
USB sticks, keyboards, 3g dongles, game controllers - all seem to work fine with it. Ordered a USB ethernet adapter to try that out to save having to download tomtom maps through my wireless connection (some distance between the hub and the car).
Related
Hi together,
ive asked me if it is possible to use an adapter for 1x micro usb (plug) -> 2x micro usb (jack).
Could the phone handle 2 USB devices at the same time?
Maybe then it is possible to use the HDMI output and the USB host parallel?
For example to use an TV as screen and an HDD as the source for a movie.
This would be nice.
Thanks in advance.
macc
When the connector is used for HDMI I doubt it can be used as USB at the same time, I'n sorry.
Maybe in a few months cyanogenmod provides a hack, if there will be an dual adapter soon.
We will see. Thank you.
macc
The hardware needs to allow this if it'd become possible. You need a really smart USB dongle that knows how to split the HDMI output from the USB output.
Sounds a little too difficult to ever happen.
Hmm thats right. I think i still dream xD
But thank you.
Sent from my GT-I9100 using Tapatalk
it is not possible. because as stated on this forum many times before, the type of usb connection is determined by the resistor between pin 4 and 5 of the micro usb connector. the strength can tell the phone, that there is either a charger, a pc connection, car kit, jig, usb otg or mhl connection present.
and i believe, this is an important thing to keep in mind for so many things:
for instance, why the original car kit triggers car mode and generic car charging cables don't or why not just any micro usb male to usb a female will work as a otg cable or why flashing should be done with the original usb cable...
so if you were to buy or build a micro usb hub, since it has no resistor in the very plug that connects to the phone, it cannot be used for anything but charging and quite frankly, i wouldn't connect more than one charger to the phone.
however, if you want to use your phone for presentations or watching movies and still be able to use it, get a bluetooth keyboard and mouse or a bluetooth presenter or do it the other way around and use a usb input device and transfer your media using allshare. everything else is physically impossible, so neither CM nor XDA can do anything about it. the only device that can do what you want is the new motorola. it has a separate micro usb and micro hdmi port and a docking station, so you can use it as a full notebook.
Thats obvious. Thank you.
macc
hi:
i think i will try to get hptp from ebay.
i see that it doesnt have usb for flash drive..
assuming that if connected to a dongle, it will read/write to flash drives,
which adapter should i search for.. mini male (for tp) > usb (flashdrive)?
thanx
I have read a thread on the usb host mode for the TP (can't remember which of the 8 forums I am on) that the micro usb port WILL support host mode BUT you will need a "Y" cable to provide power at the same time. Do a search for "host mode " on the TP forums and check it out. I have not attempted it so far as I have not found the correct "Y" cable mentioned in the thread.
Sent from my Touchpad using Tapatalk
You can find infos here :
green said:
There is fully functional USB Host support, you don't even need to do any SW modification, everything is supported out of the box with one caveat, you need external power.
Support for keyboard, mice, harddrives and cameras is fully built in the default WebOS software.
I guess HP planned to sell their own USB attachments, iPad-style.
The only thing you need is USB OTG cable. Like this: http://www.ebay.com/itm/New-micro-U...781644?pt=PDA_Accessories&hash=item19c7d49acc
Basically just search for "USB OTG cable" on ebay, costs about $3. And USB Y-cable. The only two things you need are OTG microUSB cable and USB Y cable to provide external power.
I am still looking into possibility of self-powered usb host mode, with all the support HP built in for it it almost sounds like a given there must be a way to enable it one way or another. Unfortunately chipset documentation is almost nonexistent.
Click to expand...
Click to collapse
well i got hptp today..
the ebay link USB OTG cable for was great..
the y cable search was confusing:: i do not know which kind to look for plus.. i dont see how to use this thing.. how does it get power.. i spose the USB OTG cable plugs into one of the "y" but im lost really...
i appreciate all responses..
thanx
What i've bought:
OTG: http://www.ebay.com/itm/Micro-USB-O...070399?pt=PDA_Accessories&hash=item3f0e501abf
USB Female to Female: http://www.ebay.com/itm/280732594049?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Y cable: http://www.ebay.com/itm/120626863147?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
External battery with USB: http://www.dealextreme.com/p/2400ma...a-cable-for-htc-desire-g5-samsung-i9000-57905
What i've got: unusable pile of crap. The whole system can power up a mouse or gamepad, or external HDD (which is need to be powered from wall socket in addition to TP) but it's much worse with anything else: 16gb flash stick - lights up, but not enough power to read data, USB card reader don't even lights up. And situation with powering from PC USB (instead of ext. battery) is the same.
Anyway, even if the whole system would work, i doubt that you would take all those cables with you wherever you go, so it's useless.
i watched the russian vid..
hassle w/ capital H
little to zero hope of this gonna ever work
thanx for replies
Thanks to a recent video by reverendkjr on Youtube, we now have a confirmed USB OTG method for CM9.
http://www.youtube.com/watch?v=Nc7tlPwFQpg
This has lots of potential and since I did not see much talk about it here, I decided to create a thread with what you need to buy listed in reverendkjr's video and what works. I would recommend only buying from Amazon Fulfilled sellers as they are backed by Amazon's return policy. All 3 items only cost a little over $10.
OTG Cable:
http://www.amazon.com/gp/product/B005QX7KYU
USB Y Cable:
http://www.amazon.com/gp/product/B0041CFFBM
2AA Battery Powered Portable USB Power Supply:
http://www.amazon.com/gp/product/B003M9Z5F6
(Added September 7th)
OTG Cable With Female MicroUSB (Allows you to use any microUSB charger as the power supply)
http://www.ebay.com/itm/130740524313?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
OTG Cable With Male Full Size USB (Allows you to use any power supply with regular USB port)
http://www.ebay.com/itm/Micro-USB-H...i9100-S3-i9300-i9220-i9250-XOOM-/140825132367
You can use whatever source of USB power you want including a wall charger, but I bought the 2AA battery powered supply above and can confirm it works.
Compatibility List:
-Multiple USB devices will work if you use a USB hub. A non-powered one works fine for me since you will already have a separate power source.
-USB keyboards and mice work fine including all basic functions like scroll wheel on the mouse, num and caps lock on the keyboard.
-FAT32 formatted flash drives will mount by default under "/mnt/usbdisk".
(Added September 7th)
-If you want to mount NTFS drives or multiple flash drives, download Drive Mount. This software will mount drives under "/mnt/sda1", "/mnt/sdb1", etc. I can confirm it works for multiple drives and NTFS/FAT32. It was removed from Google Play so the apk has been posted. If anybody has had success with other NTFS mounting software please post your results.
(Added April 6th)
-I tried a Rosewill USB SATA/IDE externally powered hard drive reader and was able to mount a 400GB SATA 3.5" HDD using Drive Mount. Just to see what would happen I tried a SATA DVD drive but Android doesn't recognize it and probably doesn't even support the CD/DVD file system.
(Added April 7th)
-USB card readers will work, but I've had mixed results.
USB Device Info:
If you want to diagnose items and see some info about what the Touchpad is detecting, download USB Device Info free from Google Play. Everything shows up under the Linux tab. This shows some useful info about devices including current draw, device identification, etc. I tested it with a USB hub and a few flash drives and it successfully showed entries for the hub and the flash drives. It wont tell you if Android has drivers for the device, but merely IDs the device(s) confirming the connection if working.
(Added Dec 9th)
A plugged in USB OTG adapter will show up as "Qualcomm On-Chip EHCI Host Controller" under the Linux tab regardless of whether or not power is present. This is a good way to see if you have a working OTG adapter.
Flash Drive Unmounting Issues:
Flash drives are called an SD Card when mounted. There is no option to unmount a flash drive unless you use Drive Mount, so if you notice SD card removal error messages they are referring to your flash drive and not the Touchpad's internal memory partition that is mounted as /sdcard.
When a flash drive is removed or powered off without being unmounted, its common to get a "android.process.media" force close, just tap OK.
Charging:
You will not be able to charge via micro USB while using OTG even if your power source has enough current. You can charge via the Touchstone just fine. Knowing this, you can set up a really nice docking station by using the Touchstone as a stand/charger and then using the microUSB slot for peripherals like a USB keyboard and mouse connected to a hub with spare ports for flash drives, etc.
(Added September 7th)
Insufficient Available Bus Power Fix:
If you get this error, I haven't yet, some users have had success using this app posted on Rootzwiki.
I didn't feel like buying anything and already had some things laying around so I modified an Adafruit MintyBoost to accept a device via usb, add power, and continue on down the line...
Really all I did was solder a usb cable onto the female USB port on the MintyBoost, drill a hole on the other side of the tin and feed it out. The card reader conveniently fits inside of the mint tin so it's a pretty compact package.
The only down side I've noticed is that it also charges the TouchPad (the batteries will die quicker) and continues to send power to the card reader after the OTG cable has been unplugged from the TouchPad.
Excuse the crappy pic. I really don't feel like taking a better one.
I could never get the OTG cable to charge the Touchpad, I always thought when the Touchpad sensed OTG (grounding on pin 4) it refused to take power. You can disconnect the +5v Vcc to the Touchpad (red wire) on your OTG cable and OTG devices will still work.
spunker88 said:
I could never get the OTG cable to charge the Touchpad, I always thought when the Touchpad sensed OTG (grounding on pin 4) it refused to take power. You can disconnect the +5v Vcc to the Touchpad (red wire) on your OTG cable and OTG devices will still work.
Click to expand...
Click to collapse
I came to the same conclusion some days ago ,touch pad can't be charged using org cable,needs a regular micro USB cable and the barrel AC charger.I did many tests but having otg devices working and really charge at the same time its not possible,it seems like charging but its not.
Today I accidentally found this http://direct.sanwa.co.jp/ItemPage/400-GADR002W that by first look it could be awesome...
Edit:a mini review in english http://www.gadget.pdamu.com/2012/03...r-dock-station-for-android-smartphone-tablet/
says that it can be also powered be micro usb charger....
Bummer. Tried linking my phone evo3d, but no luck.
Sent from my PG86100 using XDA
wolfgr said:
Today I accidentally found this http://direct.sanwa.co.jp/ItemPage/400-GADR002W that by first look it could be awesome...
Edit:a mini review in english http://www.gadget.pdamu.com/2012/03...r-dock-station-for-android-smartphone-tablet/
says that it can be also powered be micro usb charger....
Click to expand...
Click to collapse
If its provides its own 5v power it would likely work, but I don't really see anywhere for an external power connection and it looks too small to house a battery.
spunker88 said:
You can disconnect the +5v Vcc to the Touchpad (red wire) on your OTG cable and OTG devices will still work.
Click to expand...
Click to collapse
For whatever reason, when I tried that the card reader wouldn't initialize. Once I connected the +5v from the OTG it'd light right up...
After it lit up I could disconnect the +5v and it'd stop the "charging" notification on the touchpad and keep working.
spunker88 said:
If its provides its own 5v power it would likely work, but I don't really see anywhere for an external power connection and it looks too small to house a battery.
Click to expand...
Click to collapse
it has the regular usb port to connect otg device plus a micro usb female to connect. our ac charger
wolfgr said:
it has the regular usb port to connect otg device plus a micro usb female to connect. our ac charger
Click to expand...
Click to collapse
Then it should work fine as the Touchpad uses a standard OTG pinout, it just doesn't provide power so if it has a way to provide power to devices than I see no reason why it wouldn't work.
quick question that i didn't see answered above :S can i use the otg cable adapter without another power source (like can touchpad power it?)? Saw it asked above but didn't see anyone saying that the power source is required :S
kind of want to plug a usb flash drive into touchpad so I can type documents when I'm on the go and switch to computer. don't want to carry another power source either :S
eyeb said:
quick question that i didn't see answered above :S can i use the otg cable adapter without another power source (like can touchpad power it?)? Saw it asked above but didn't see anyone saying that the power source is required :S
kind of want to plug a usb flash drive into touchpad so I can type documents when I'm on the go and switch to computer. don't want to carry another power source either :S
Click to expand...
Click to collapse
No, the Touchpad doesn't provide any power for OTG devices which is why you need to supply it power. The cheap USB charger I linked to in the original post will work fine for a portable power supply if you don't want to build something yourself.
And it also appears you can't just plug the other USB into the wall?
Sent from my PG86100 using XDA
can someone get a group buy going for these???
spunker88 said:
If its provides its own 5v power it would likely work, but I don't really see anywhere for an external power connection and it looks too small to house a battery.
Click to expand...
Click to collapse
This would be fantastic... but i dont speak Japanese!!
mrtomaso said:
And it also appears you can't just plug the other USB into the wall?
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
So, we can't just plug it into a wall for power? I have to buy a battery powered unit or use a powered hub?
Sent from my cm_tenderloin using XDA
Nice and cheap and the best part it works.
USB Hub works...sort of.
I tried this with a cheap USB hub I bought. I had bought it for my laptop and made sure it had it's own power supply to keep the load off my laptop, so I thought it would be perfect for this. Nice try though.
Turns out it needs 5V from the host to activate as well as the additional external power supply. Just fired it up with my TouchPad connected via a Y-Cable and my Laptop providing the 5V to fire it up. Works like a charm.
As yet to find out if it works with my travel charger providing the 5V and no external power supply plugged in, and how many devices I can hook up. It's got 7 ports so I suppose the supply might be useful then, but do I really need to hook up that many devices? Otherwise...pointless. Back to the drawing board I go.
wolfgr said:
Today I accidentally found this http://direct.sanwa.co.jp/ItemPage/400-GADR002W that by first look it could be awesome...
Edit:a mini review in english http://www.gadget.pdamu.com/2012/03...r-dock-station-for-android-smartphone-tablet/
says that it can be also powered be micro usb charger....
Click to expand...
Click to collapse
This would be really handy and it's a much more elegant solution than a y cable and external power source.
Too bad it seems like we won't be able to get one easily.
Am i missing something here or can i use my 3.5" external HDD (with a power supply) to provide power to my External so i dont have to plug the cable into a USB hub?
mafu6 said:
Am i missing something here or can i use my 3.5" external HDD (with a power supply) to provide power to my External so i dont have to plug the cable into a USB hub?
Click to expand...
Click to collapse
You should, I did this on my Touchpad running CM7. Haven't tried since going to CM9.
Sent from my Nexus S using xda premium
Hello
Can someone tell me the exact type of USB connector is on the Samsung Galaxy View. Then manual only says
it's a USB connector V2.
I've ordered the device but have not received it yet. But trying to determine if the connector is USB v2 or micro USB connector?
Want to plug in an ethernet adapter.
Thanks in advance
JRS
The port is micro-USB (not to be confused with mini-USB). Although most stores don't mention it, most reviews do. The Gizmodo review even has a close-up picture: https://gizmodo.com/samsung-galaxy-view-review-i-love-this-magical-slab-of-1740835366
i would recommend grabbing a micro usb "cable" OTA adapter - you can utilize it for all usb storage, upgrades, etc, etc.... they make a hard snap in adapter but use caution on them as for as easy as they snap in , they also snap out breaking your port with it. The cable adapters are way more flexible and with the tablet being so large in the first place it really doesn't make a difference if it's dangling on the side.
I tried to hook up a game controller via the OTG adapter and it appears to not send any power out from it. Even with a USB thumb drive and other USB C adapters, nothing seems to work. Has anyone else noticed this? You can transfer data via the cable just fine, but I find it strange it doesn't send any power through the plug.
Have you tried connecting it the other way round?
tomixnscale89 said:
I tried to hook up a game controller via the OTG adapter and it appears to not send any power out from it. Even with a USB thumb drive and other USB C adapters, nothing seems to work. Has anyone else noticed this? You can transfer data via the cable just fine, but I find it strange it doesn't send any power through the plug.
Click to expand...
Click to collapse
I noticed the same thing. I believe it's because once it comes out the other side with the 5-pin adapter, it is then reduced to the old micro-usb specification, which uses 5 wires. True USB-C connection has like 20 or 24 pins. I was able to get a couple very basic OTG of things to work, like a mouse and a thumb drive. BUT HERE IS THE CATCH - The mag connector has 5 pins, reduced from 20-some on the C connection.. so true USB-C connection is no longer possible once you get on the other side of the connector. So the trick is to NOT use a USB-C OTG when it's in the case with magnetic adapter. You must use a Micro USB OTG with a Micro-to-C adapter attached to that. Even so, not everything worked just by sticking on the Micro-to-C adapter.. Mouse and a thumb drive worked, but my ethernet adapter and VGA/HML/HDMI adapters did not. Out of the case, I can use my USB-C to HDMI cable to display on my TV. But same cord does not work with the magnetic adapter with the case. It is simply not possible because the reduction of contact pins from phone to case to magnet.. One more thing to consider, if you're trying to do anything other than charging, make sure the magnet is on the right way.. there's a little logo it should be in the front.
If I can come across a spare or broken Dual Screen case, I'd be curious to take it apart and see if it would be possible to rig it up with a better plug for the case.. find which wires go to the workings of the DS and leave them intact, but then try to replace the magnetic pins with a female C plug that has all the contacts intact still..
Seymour_Asses said:
I noticed the same thing. I believe it's because once it comes out the other side with the 5-pin adapter, it is then reduced to the old micro-usb specification, which uses 5 wires. True USB-C connection has like 20 or 24 pins. I was able to get a couple very basic OTG of things to work, like a mouse and a thumb drive. BUT HERE IS THE CATCH - The mag connector has 5 pins, reduced from 20-some on the C connection.. so true USB-C connection is no longer possible once you get on the other side of the connector. So the trick is to NOT use a USB-C OTG when it's in the case with magnetic adapter. You must use a Micro USB OTG with a Micro-to-C adapter attached to that. Even so, not everything worked just by sticking on the Micro-to-C adapter.. Mouse and a thumb drive worked, but my ethernet adapter and VGA/HML/HDMI adapters did not. Out of the case, I can use my USB-C to HDMI cable to display on my TV. But same cord does not work with the magnetic adapter with the case. It is simply not possible because the reduction of contact pins from phone to case to magnet.. One more thing to consider, if you're trying to do anything other than charging, make sure the magnet is on the right way.. there's a little logo it should be in the front.
If I can come across a spare or broken Dual Screen case, I'd be curious to take it apart and see if it would be possible to rig it up with a better plug for the case.. find which wires go to the workings of the DS and leave them intact, but then try to replace the magnetic pins with a female C plug that has all the contacts intact still..
Click to expand...
Click to collapse
Thank you @Seymour_Asses ! I saw here https://twitter.com/konic0s/status/1202966945693220865 that LG G8X supports USB-C to HDMI adapters but I didn't know if it also worked with the Dual Screen case but now I know it doesn't, thanks for the information, very helpful ! :good:
BTW I think that when you connect the Dual Screen case to the G8X it uses the dedicated USB-C high speed pins of the G8X for video-out so these pins are not available anymore for other HDMI out, I'm not sure about it and don't have any proofs but it seems you are right about not enough pins on the mag connector.
If i remember correctly, the manual states that most USB-C functions wont work though the dual screen case. I think there was some speculation that its due to most of that bandwidth being used for the second screen.
Quite simple: the Mag USB-C adapter is for charging only. It drives me mad as i have a professional USB-C headphone that I use for conferencing.
But I understand the reason: when in dual screen, the USB-C data connection is in use dor the second screen, enabling the USB-C connection beyond that requires a hub to be built in the case "before" the DS connection (so it wont work building it in the dongle itself).
I wish LG went with a Pogo connector on the bottom or on the side to activate the DS case. This would have made the chin slimmer and freed up the USB-C port.
Anyway, it is what it is now, and i will not trade my LG G8x DS for anything at the moment... Until maybe that Surface Duo phone for which I might need to sell a vital organ ?