Phone restarts continuously - Xperia Z2 Q&A, Help & Troubleshooting

Dear devs, I really need your help. After I flashed a pre rooted marshmallow with twrp, it showed android is upgrading as it should. However after completing the upgrade, it reached lockscreen and restarted. It keeps on doing this over and over again, sometimes showing android is upgrading, sometimes not. Other times it reaches lockscreen, other times it doesn't. This continued to happen until my battery died. I cannot turn the phone off, as soon as I connect a charger, it tries to come on. Even when I turn off with power + volume up, it still comes back on without my input. I can't boot into twrp to load my backup, I can't get into flash mode to use flashtool either. I am totally stuck and have run out of ideas. I am not a total noob and have flashed roms before. Hell, I rooted a device with an unlockable boot loader. I also don't think it's a brick or bootloop, because I've fixed a boot loop before. Please guys there's no Sony repair shop in my country so that's not even an option. I am open to any suggestions apart from sending the phone to Sony

This happened with me too. Simply power off your phone from the power off button where the sim card is(small red button press it using a pin or pen) .Then download and ftf of your choice i recommend download android 4.4.2 ftf and flash it as it is simple to root using toolkit and recovery is also easy to install then install existenz mm as its much better than the stock with xperia X features and has the latest twrp recovery. simply follow this guide but download the ftf of android 4.4.2 http://www.xperiablog.net/2015/03/1...peria-lollipop-using-xperifirm-and-flashtool/

Re:
Hariskh said:
This happened with me too. Simply power off your phone from the power off button where the sim card is(small red button press it using a pin or pen) .Then download and ftf of your choice i recommend download android 4.4.2 ftf and flash it as it is simple to root using toolkit and recovery is also easy to install then install existenz mm as its much better than the stock with xperia X features and has the latest twrp recovery. simply follow this guide but download the ftf of android 4.4.2 http://www.xperiablog.net/2015/03/1...peria-lollipop-using-xperifirm-and-flashtool/
Click to expand...
Click to collapse
Tried the red button. Even removed the battery. Phone restarts immediately. Won't give me the time to boost to twrp

Related

[Q] Problem to get root after unlocking bootloader

Dear All,
I have a Sony Xperia U (European).
I used the update service to first competely update the phone to stock 4.0.4 (6.1.1.B.1.54)
Then I did the procedure to get the key and unlock the bootloader. That all worked fine.
Then I tried to do the root of the backup and restore. But I understand that doesn't work anymore.
So I found the following:
1. Flash ics 6.1.1.b.1.10 Kernel
2. Root with flashtools
3. Flash ics 6.1.1.b.1.54 Kernel
I have the drivers installed from the Flashtool folder. And the fastboot mode and flashboot drivers work in order.
After flashing the older kernel with the Flashtool the phone reboots and after that I when it boots everything become distorted and unresponsive.
I can see part of the OS and try to touch and 'something' will happen. But it doesn't seem to be normal.
The only thing I can do then is use the flashtool to relock the bootloader and then the update service to reflash back to stock again.
I have first search the whole subforum and read everything. But I can't seem to fine something about this.
Am I missing something?
The screen does go dark and awful using the older kernel. Just let it take its time to load and u can just about make out the screen to use the root tool. Although.... If you're bootloader unlocked just fastboot an auto rooting kernel
Sent from my Jellybean Xperia S
Ben36 said:
The screen does go dark and awful using the older kernel. Just let it take its time to load and u can just about make out the screen to use the root tool. Although.... If you're bootloader unlocked just fastboot an auto rooting kernel
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
Ah OK. So that is supposed to be like that. Thanks for the tip, I will try an auto rooting kernel, and post my results here.
Try - http://forum.xda-developers.com/showthread.php?p=35725772
Sent from my Jellybean Xperia S
Phone Died?
Well for some reason the phone doesn't turn on anymore.
I thought I 'overdrained' it, so I put it all night long to charge it. But this morning still the same and it won't turn on.
The small red led just right of the camera lits up when I connect the charger so he sees something but what?
Cannot get in flash or fastboot mode. However sometimes I see the phone out of itself turn on the illumination bar (green) for just a few seconds.
The phone itself does nothing. But I'm thinking of a brick, unless someone else has some ideas?
Take these steps...may help
thatrunks said:
Well for some reason the phone doesn't turn on anymore.
I thought I 'overdrained' it, so I put it all night long to charge it. But this morning still the same and it won't turn on.
The small red led just right of the camera lits up when I connect the charger so he sees something but what?
Cannot get in flash or fastboot mode. However sometimes I see the phone out of itself turn on the illumination bar (green) for just a few seconds.
The phone itself does nothing. But I'm thinking of a brick, unless someone else has some ideas?
Click to expand...
Click to collapse
Try this...
1. Take out the battery and sim and leave it for minutes...then take in the sim and then battery.
2. connect the phone to a charger and wait for minimum 25 seconds and see what happenes...if some positive response you get...leave it charging as it is for some time minimum half hour.
[Before doing 3rd step download latest stock firmware 6.1.1.C.1.0 for your phone.(Please be sure for thats a stock original firmware)] - Search It-> [Stock ROM] Firmware 6.1.1.C.1.0 FTF ICS Xperia U - T-Mobile (Croatia)
3. connect your phone with the pc in flashmode and flash this firmware.
4. After flashing Restart the phone and wait for the setup and then you get then the power off button on your mobile screen, power off it.
5. Download TheBrains Recovery - Search it [Its a kernel having CWM Recovery Prerooted]
6. Now connect your phone in fastboot mode [While connecting your phone to pc press and hold Volume Up button]
7. Select a kernel to flash [Kernel that you downloaded just now]
8. After flashing unplug usb and restart your phone, when Sony logo appears and phone vibrates press Volume Up button again and again then you will come to CWM Recovery Menu.
9. Then from recovery wipe cache. and wipe dalvich cache [In advance option]
10. Now restart your phone and wait...and leave it for 5 mins.
11. Now your phone is updated and prerooted safely and smoothly... and yes ready for installing any stock based ROM or Custom ROM[which are based on latest C.1.0 firmware].
Mohitash said:
Try this...
1. Take out the battery and sim and leave it for minutes...then take in the sim and then battery.
2. connect the phone to a charger and wait for minimum 25 seconds and see what happenes...if some positive response you get...leave it charging as it is for some time minimum half hour.
[Before doing 3rd step download latest stock firmware 6.1.1.C.1.0 for your phone.(Please be sure for thats a stock original firmware)] - Search It-> [Stock ROM] Firmware 6.1.1.C.1.0 FTF ICS Xperia U - T-Mobile (Croatia)
3. connect your phone with the pc in flashmode and flash this firmware.
4. After flashing Restart the phone and wait for the setup and then you get then the power off button on your mobile screen, power off it.
5. Download TheBrains Recovery - Search it [Its a kernel having CWM Recovery Prerooted]
6. Now connect your phone in fastboot mode [While connecting your phone to pc press and hold Volume Up button]
7. Select a kernel to flash [Kernel that you downloaded just now]
8. After flashing unplug usb and restart your phone, when Sony logo appears and phone vibrates press Volume Up button again and again then you will come to CWM Recovery Menu.
9. Then from recovery wipe cache. and wipe dalvich cache [In advance option]
10. Now restart your phone and wait...and leave it for 5 mins.
11. Now your phone is updated and prerooted safely and smoothly... and yes ready for installing any stock based ROM or Custom ROM[which are based on latest C.1.0 firmware].
Click to expand...
Click to collapse
Thanks for your input.
Unfortunately I cannot do step 3.
He just will not go into flashmode, tried different cables but that doesn't work. He won't go into fastboot either.
I've taken out the battery and sim for 5 days. Just to be sure . But I'm thinking it's bricked. This has never happened to me before.
I have unlocked and flashed many phones (mostly HTC's and Samsungs), but this is a first with Sony, hmm and first time a brick.
thatrunks said:
Dear All,
I have a Sony Xperia U (European).
I used the update service to first competely update the phone to stock 4.0.4 (6.1.1.B.1.54)
Then I did the procedure to get the key and unlock the bootloader. That all worked fine.
Then I tried to do the root of the backup and restore. But I understand that doesn't work anymore.
So I found the following:
1. Flash ics 6.1.1.b.1.10 Kernel
2. Root with flashtools
3. Flash ics 6.1.1.b.1.54 Kernel
I have the drivers installed from the Flashtool folder. And the fastboot mode and flashboot drivers work in order.
After flashing the older kernel with the Flashtool the phone reboots and after that I when it boots everything become distorted and unresponsive.
I can see part of the OS and try to touch and 'something' will happen. But it doesn't seem to be normal.
The only thing I can do then is use the flashtool to relock the bootloader and then the update service to reflash back to stock again.
I have first search the whole subforum and read everything. But I can't seem to fine something about this.
Am I missing something?
Click to expand...
Click to collapse
I had the same problem while rooting my phone too.
Follow These:
1.Install the latest PC Companion on your computer. It auto updates if you have it installed on your computer.
2.Download the kernels 6.1.b.1.10 and 6.1.b.1.54 and Flashtool. Make sure you have usb debugging on even before you flash the kernels.
3. With the help of flashtool flash your phone on .10 kernel reboot. The launcher might turn black and become unresponsive so enable usb debugging before flashing itself.
4. Start your phone after flashing .10 and connect to your computer.
5.Start Bin4ry v17 or v18. It a cmd file developed by a dev on xda. Just search for it. Rooting via flashtool wont work. Use Bin4ry
6. Press 1 and follow the steps. after the phone finishes rooting it it'll restart and confirm it.
7. Switch off your phone and flash 54 kernel
8. Pretty sure it'll work!
Worked for me! Hope it helped

Bricked Xperia Z tablet

Hey guys,
I've got the xperia z tablet (16gb wifi only)
and I had unlocked it, the other day I saw it finally got an OTA update, so I let it update.
apparently that was a bad idea?, I was stuck with the broken android symbol every time i attempted to start the tablet..
I tried the sony software, the recovery thing it has. That has only made things worse, now the tablet refuses to start whatsoever.
Can anyone point me in the right direction? I'd appreciate it very much.
dempster said:
Hey guys,
I've got the xperia z tablet (16gb wifi only)
and I had unlocked it, the other day I saw it finally got an OTA update, so I let it update.
apparently that was a bad idea?, I was stuck with the broken android symbol every time i attempted to start the tablet..
I tried the sony software, the recovery thing it has. That has only made things worse, now the tablet refuses to start whatsoever.
Can anyone point me in the right direction? I'd appreciate it very much.
Click to expand...
Click to collapse
Tried to flash with fastboot an boot.img from CM or an other AOSP ROM, and then enter recovery...
zeus2602 said:
Tried to flash with fastboot an boot.img from CM or an other AOSP ROM, and then enter recovery...
Click to expand...
Click to collapse
My tablet won't give me so much as an led indicator of it charging.
dempster said:
My tablet won't give me so much as an led indicator of it charging.
Click to expand...
Click to collapse
If your not able to flash with fastboot (connect tablet over usb (push the boot button) an load an image file on the Tablet.
HARD-BRICK!!!
dempster said:
My tablet won't give me so much as an led indicator of it charging.
Click to expand...
Click to collapse
Yould could try and have a look at the following thread:
http://forum.xda-developers.com/showthread.php?t=1849170
Hi
I had the same issues when I flashed the wrong ROM. Nothing worked no power light or anything.
Now I can't remember exactly what I did but I started to press buttons and I'm sure that holing the power button and the vol up for a while made it start again and it displayed an error and then went into flash mode .
As I said I'm not sure which buttons I pressed but I know that I held them in for a while
Try using Flashtool... Im pretty sure you can rcover it by flashing a FTF file.
Z Ultra Z1 hardbrick
http://forum.xda-developers.com/showthread.php?t=2646405 :good:
So there is hope. :highfive:
I think I found the testpin. My sgp311 has started to blink after being dead since November, when I bricked it.
I don't have the device pack though.. Do you have any clue on how to find it? I think I just need the sgp311 SEMC package to resuscitate it now... Hopefully...
Sent from my Galaxy Nexus using Tapatalk 4
get the stock ftf file and flash it using flashtools, I was in a bootloop and it worked
i know its an old post but i have to try
i m in a boot loop and i want to find the Fed file in order to do a fastboot....
Can someone give them??
I test my tablet SGP321 with many ROMs.. I end up going to boot loop... Crashes and stuff but I always recover from it.
The things I do before doing anything insane with my tablet
1. Take backup off apps/data
2. Always enable debugging and Unknown Sources
3. Keep the backup of the ROMs
4. Always have the xperia flashtool on my computer
Here's what you can do..
Press and hold the Power button and the Volume Up button for ten seconds until you see a white light flashing three times. While doing this somewhere around in 5 seconds you'll see white led flashing once, but keep on pressing those buttons till it flashes next three times.
After that your tablet will be turned Off.
You can put your device in flash mode and flash a new ROM from Xperia flash tool.
If you get the error "Unknown sources and USB debugging must me enable for flash mode, then your option can be to flash the ROM from fastboot.
Download a ROM (CyanogenMod or any with custom recovery).
Flash the boot.img via fastboot and reboot your device.
Once done you should see a led lit up while the device is booting (pink/magenta color in case of CyanogenMod).
Press the volume up/down button and you should be able to go to recovery mode.
From here you can recover your device easily
And before you do anything make sure you've charged your device well.
Good luck

[Q] Xperia Pro unable to flash + bricked

Hi everyone,
i bought a second hand Xperia Pro which came wih Lupus Kernel and Ultimate HD rom. Now I wanted to try the stock firmware for comparison but i can't flash it.
I've followed several guides and searched on the forum with no luck. what i've done is basically
- installed flashtool, latest version
- downloaded the stock firmware and put the .tft in the firmware folder
- open the driver installer from the driver folder in flashtool and selecting fastboot, flashmode and xperia pro drivers to install
- click on the flash icon, select the correct firmware, click flash
- when the window with the animation asks for it i press and hold the volume down button and attach the usb cable. I keep pressing the button and the lupus logo appears, then nothing happen and the window with the usb cable animation goes on
i've tried several times and also on different computers... and... to get thing worse, i've just bricked my xperia :s after several attempts, a menu apeared on the display (i have no idea why, i must have done something different from the previous attempts) i think it was called lupus cwm. One of the options was about wiping the phone... i've tried with that one, then he asked me "Root access is missing. Root Device? This cannot be undone" and I choosed yes... not very wise to choose yes or no when you don't know what you are talking aobut, i know
So basically if i try to turn the phone freezes on the lupus logo and i have to pull the battery out. And, no need to say it, nothing has changed when it comes to trying to flash it with flashtool
any help will be much appreciated, i really don't know what else i could try now...
fedcas said:
Hi everyone,
i bought a second hand Xperia Pro which came wih Lupus Kernel and Ultimate HD rom. Now I wanted to try the stock firmware for comparison but i can't flash it.
I've followed several guides and searched on the forum with no luck. what i've done is basically
- installed flashtool, latest version
- downloaded the stock firmware and put the .tft in the firmware folder
- open the driver installer from the driver folder in flashtool and selecting fastboot, flashmode and xperia pro drivers to install
- click on the flash icon, select the correct firmware, click flash
- when the window with the animation asks for it i press and hold the volume down button and attach the usb cable. I keep pressing the button and the lupus logo appears, then nothing happen and the window with the usb cable animation goes on
i've tried several times and also on different computers... and... to get thing worse, i've just bricked my xperia :s after several attempts, a menu apeared on the display (i have no idea why, i must have done something different from the previous attempts) i think it was called lupus cwm. One of the options was about wiping the phone... i've tried with that one, then he asked me "Root access is missing. Root Device? This cannot be undone" and I choosed yes... not very wise to choose yes or no when you don't know what you are talking aobut, i know
So basically if i try to turn the phone freezes on the lupus logo and i have to pull the battery out. And, no need to say it, nothing has changed when it comes to trying to flash it with flashtool
any help will be much appreciated, i really don't know what else i could try now...
Click to expand...
Click to collapse
You did all the steps to flash the stock firmware ftf like it should be done! Please try to take off the battery, wait a few seconds, reinsert it and press and hold volume down while connecting the usb. A green led should light up and it should start flashing
mihahn said:
You did all the steps to flash the stock firmware ftf like it should be done! Please try to take off the battery, wait a few seconds, reinsert it and press and hold volume down while connecting the usb. A green led should light up and it should start flashing
Click to expand...
Click to collapse
thanks for your help. I've tried removing the battery but it's just the same. A blue led, not green, turns on for a couple of seconds on my xperia pro... i've recorded a short video so you can check that i'm doing everything properly...
OUCH i can't insert links :s youtube .com/ watch?v=_hIZMn9HrlA
so you think it's not a problem if i have bricked the phone wiping off the firmware? the flashing procedure should work the same?
MUAHHAHA got it!!! my phone is finally flashed! i was just pressing the wrong button :s even if all the guides specific for xperia pro were saying to pross the volume down button, i had to press the BACK button! and the led did turn on green indeed, as you were saying
just another question: what happened when that CWM menu asked me "Root access is missing. Root Device? This cannot be undone" and I choosed yes? does that mean i rooted the phone? and is it stil rooted or it's been overwritten by the original firmware i have just flashed?
thanks
fedcas said:
MUAHHAHA got it!!! my phone is finally flashed! i was just pressing the wrong button :s even if all the guides specific for xperia pro were saying to pross the volume down button, i had to press the BACK button! and the led did turn on green indeed, as you were saying
just another question: what happened when that CWM menu asked me "Root access is missing. Root Device? This cannot be undone" and I choosed yes? does that mean i rooted the phone? and is it stil rooted or it's been overwritten by the original firmware i have just flashed?
thanks
Click to expand...
Click to collapse
I'm sorry, I forgot the thing about the back button instead of volume down, too
If you have an unlocked bootloader, your phone normally should automatically be rooted when you flash a custom kernel as (nearly) all kernels for our devices include this feature. But as you have flashed the stock firmware now, all was overwritten and you have to flash another custom kernel to get cwm back
ok, thanks a lot

Hardbrick Sony Xperia Tablet Z SGP321

Hello guys.
Hoping on your truly support. Have the problem, which cannot solve by myself.
Was trying to flash boot.img from CWM recovery 6.0.3.0 via fastboot. It flashes succesfully, but after rebooting the tablet it doesnt show any signs of life. Was trying EMMA for solving , Flashtool to change kernel, but when plug it through usb, it haven't launched and PC don't recognize any device connected. When i press Vol+ Vol- Power at the same time LED lights with white 3 times and that all.
Was using rooted Lollipop 5.1.1 with unlocked bootloader.
Is there any possibility to reanimate it or its finished totally.
Regards.
Edit.
Many thnx 2 Alok Bajaj for his solution:
Here's what you can do..
Press and hold the Power button and the Volume Up button for ten seconds until you see a white light flashing three times. While doing this somewhere around in 5 seconds you'll see white led flashing once, but keep on pressing those buttons till it flashes next three times.
After that your tablet will be turned Off.
You can put your device in flash mode and flash a new ROM from Xperia flash tool.
If you get the error "Unknown sources and USB debugging must me enable for flash mode, then your option can be to flash the ROM from fastboot.
Download a ROM (CyanogenMod or any with custom recovery).
Flash the boot.img via fastboot and reboot your device.
Once done you should see a led lit up while the device is booting (pink/magenta color in case of CyanogenMod).
Press the volume up/down button and you should be able to go to recovery mode.
From here you can recover your device easily
And before you do anything make sure you've charged your device well.
Good luck
Cheers mate!
hi,
thanks for the tutorial, I try it but*don`t see the second three blue blinks how long usually*takes to wait for them
Hi there! I think I have hardbricked my tablet (SGP321) too. The thing is, mine won't start, no matter what I press and do. If I press the power button it blinks white and if I press the UP button with it, it blinks three times. After that nothing happens. If I connect a USB to it, it just flickers first red and then green. And thats it.
I tried to flash [7.1] CyanogenMod 14 [POLLUX/POLLUX_WINDY][UNOFFICIAL] by CaHbKaUp and chose the Pollux Version from this thread http://forum.xda-developers.com/xperia-tablet-z/general/rom-cyanogenmod-14-t3496758. I also flashed the recommended GApps.
I whiped the sd-card in recovery (twrp) first and then flashed the new rom and GApps.
I think I chose the wrong version, maybe? I flashed my tablet once and I thought I could do it again, the same way as before. Guess I was wrong.
If there is anything I can do to get this back to work, please respond!
with regards
PsyPax
seems like no one is looking at this thread anymore.
edit: Solution found. forgot to unlock bootloader... ^^;
Hardbrick too
PsyPax said:
seems like no one is looking at this thread anymore.
edit: Solution found. forgot to unlock bootloader... ^^;
Click to expand...
Click to collapse
Just ran into the same problem. So there are stil people looking
Didn't know about the bootloader.
Has Android 5.1.1 Stock rom,
rooted it
installed XZDualrecovery from here:
https://forum.xda-developers.com/showthread.php?t=2261606
Then it showed up twrp and I flashed lineage-14.1-20170417-UNOFFICIAL-pollux.zip
ticked "reboot" and ??? nothing
So what are the steps now to get it running again?
baarbaar said:
So what are the steps now to get it running again?
Click to expand...
Click to collapse
Reflash device with Flashtool.
You can't flash custom ROMs with XZDR recovery.

ZU not responding to anything after installing recovery

Ok guys so I have a Sony Xperia Z Ultra and I decided to install Marshmallow 6.0 on it (which wasn't released for my phone). I downloaded the boot, cache, system and userdata imgs of Marshmallow 6.0 and installed them using fastboot, then I was supposed to boot in recovery mode and wipe the caches and do a reset, before installing the G-apps zip file and completing the entire process. So I tried to start recovery mode which I had previously installed already and it failed, starting in safe mode instead. Then I re-installed the recovery using a batch file in a directory downloaded from NUT's XDA Developers download site, which failed on the first try. So I tried again and it was installed, meaning my phone will automatically reboot into recovery right after it was done. My phone rebooted but my screen remained black and nothing happened. I tried holding down the power button and it vibrated but nothing happened again. I tried holding down the power and volume down button for 30sec and more, tried it with the volume up button too and it didn't work. I tried connecting my phone to the pc but it won't recognize it (of course) and I tried holding the volume up button upon connecting to enter fastboot but that failed as well. Now it's stuck like this and I'm hoping its battery drains out and it powers off. Help.
Update: I went to sleep and now that I've woken up, the screen is still going with the low battery red light. I don't know for how long it will continue, but the problem remains.
Update: Now my pc recognizes it but all adb commands have no effect.
Jissatsu said:
Ok guys so I have a Sony Xperia Z Ultra and I decided to install Marshmallow 6.0 on it (which wasn't released for my phone). I downloaded the boot, cache, system and userdata imgs of Marshmallow 6.0 and installed them using fastboot, then I was supposed to boot in recovery mode and wipe the caches and do a reset, before installing the G-apps zip file and completing the entire process. So I tried to start recovery mode which I had previously installed already and it failed, starting in safe mode instead. Then I re-installed the recovery using a batch file in a directory downloaded from NUT's XDA Developers download site, which failed on the first try. So I tried again and it was installed, meaning my phone will automatically reboot into recovery right after it was done. My phone rebooted but my screen remained black and nothing happened. I tried holding down the power button and it vibrated but nothing happened again. I tried holding down the power and volume down button for 30sec and more, tried it with the volume up button too and it didn't work. I tried connecting my phone to the pc but it won't recognize it (of course) and I tried holding the volume up button upon connecting to enter fastboot but that failed as well. Now it's stuck like this and I'm hoping its battery drains out and it powers off. Help.
Update: I went to sleep and now that I've woken up, the screen is still going with the low battery red light. I don't know for how long it will continue, but the problem remains.
Update: Now my pc recognizes it but all adb commands have no effect.
Click to expand...
Click to collapse
you should give some info... like what rom youre using. also use twrp 3.x with mm
you cant expect help without telling the error messages you get...
you can always power off your phone with holding vol down + power for 30sec
MusterMaxMueller said:
you should give some info... like what rom youre using. also use twrp 3.x with mm
you cant expect help without telling the error messages you get...
you can always power off your phone with holding vol down + power for 30sec
Click to expand...
Click to collapse
YEAH ok here's my issue. NO MATTER WHAT recovery I install (through the app or fastboot) IT DOES NOT WORK. Any earlier version of TWRP, it will boot into, but the screen is unresponsive, while the latest version of TWRP simply acts like it isn't there as the phone never boots into recovery, this has been happening on MM and now it's happening on my latest stock. After the failed MM attempts I've downloaded the latest C6833 stock and everything is fine, but I'd like to be able to install custom roms like everyone else. It took me a day or two to learn how to actually do that, but I still have no idea why NO recovery works for me. My device is rooted, bootloader unlocked, all that crap. I tried many kernel links on your site, especially that main one that the mod posted, but the links are dead. Help.
Jissatsu said:
YEAH ok here's my issue. NO MATTER WHAT recovery I install (through the app or fastboot) IT DOES NOT WORK. Any earlier version of TWRP, it will boot into, but the screen is unresponsive, while the latest version of TWRP simply acts like it isn't there as the phone never boots into recovery, this has been happening on MM and now it's happening on my latest stock. After the failed MM attempts I've downloaded the latest C6833 stock and everything is fine, but I'd like to be able to install custom roms like everyone else. It took me a day or two to learn how to actually do that, but I still have no idea why NO recovery works for me. My device is rooted, bootloader unlocked, all that crap. I tried many kernel links on your site, especially that main one that the mod posted, but the links are dead. Help.
Click to expand...
Click to collapse
there is other way to enter twrp 3.0.2 with new bootloader, power + vol down (instead of up!)
read op of twrp thread and follow instructions carefully and it'll work. also for the twrp i build you must be on a rom which uses sony aosp device tree (like aicp). otherwise i wont guarantee that it will work.
MusterMaxMueller said:
there is other way to enter twrp 3.0.2 with new bootloader, power + vol down (instead of up!)
read op of twrp thread and follow instructions carefully and it'll work. also for the twrp i build you must be on a rom which uses sony aosp device tree (like aicp). otherwise i wont guarantee that it will work.
Click to expand...
Click to collapse
I tried holding the button down like you said, tried rebooting to recovery from TWRP manager itself, with root access granted of course. Nothing. Can you link the post or something? However I don't think anything in it will fix my issue.
Sounds like you flashed a recovery for another model. I had this issue with a ROM awhile back.
Didn't read the walls of text.
I recommend using you flashtool and flashing a stock ftf. Re-root, recovery and flash again.
---------- Post added at 06:16 AM ---------- Previous post was at 06:11 AM ----------
Edit. Read somethings. There are plenty of ROMs on xda do not flash the old way which is part by part. Flash the most recent Sony firmware, and you should be able to flash MM ROMs.
I have copy's of the recovery if needed.
I did flash the latest FTF using the flash tool, but I need a working recovery in order to install the gapps and still no recovery works on my device.
check here
http://forum.xda-developers.com/xpe...2-0-togari-t3452968/post68481255#post68481255

Categories

Resources