Device- karbonn titanium octane plus, rebrands - nibiru mars one H1, walton primo v1
i will try to be as informative as possible.
I found my phone off in my pocket, tried to turn it on but freezes on boot/logo screen for some seconds and displays some random horizontal lines on over the logo screen like it crashed or something.
also charging logo screen(screen before the charging animation screen appears) shows some lines and reboots again to charging logo screen and do not shows charging animation.
i was using stock ROM , I thought i would flash stock ROM again using TWRP(installed earlier) but recovery is not opening.
So I tried connecting to my laptop.
In the past, I've used SP flash tool to flash recoveries, it worked fine.
drivers are fine.
now it rarely detects "MediaTek preloader usb vcom port" like it should be, but mostly it detects "MTK usb port" which is useless and don't works.
flashing works only when "MediaTek preloader usb vcom port" is detected and don't work when "MTK usb port".
when "MTK usb port" is detected, SP flash tool just detects, doesn't do anything and after some seconds shows error "S_DL_GET_DRAM_SETTING_FAIL" and solution "Please check your image to matches with your phone which is to be downloaded." please do not focus here as device should have detected as "MediaTek preloader usb vcom port".
when it rarely detects "MediaTek preloader usb vcom port", the flashing process starts but strucks in the middle and fails.
drivers installed in laptop are correct .
what should i do now ???
any other tools can i use ?
I think u have to install again drivers and vcom driver.Did u try format and download option in spflash tool??
luvchandu said:
I think u have to install again drivers and vcom driver.Did u try format and download option in spflash tool??
Click to expand...
Click to collapse
yes, tried format+download option
at the time of this main post i got this error
https://drive.google.com/file/d/0B13R3B9-w5DYTXpLS0xoLV8xMW8/view?usp=sharing
i tried today and got this error
https://drive.google.com/open?id=0B13R3B9-w5DYNEUtX05HR3V1OVk
i have installed these drivers
https://drive.google.com/open?id=0B13R3B9-w5DYR0RyN2Y4a0xoUjA
Download rom again and try
luvchandu said:
Download rom again and try
Click to expand...
Click to collapse
ROM is good, theres no problem with it.
did u saw those images ??
problem is phone is not detected as it should be, ot should be detected as MTK vcom or preloader or something other than simple USB port.
Drivers are installed correctly.
it gives different error different times like in previous images i had post.
Bro i have googled the errors and i found that it is compatibility issue.What is your rom version tell me. I will send you the download link.
---------- Post added at 04:04 AM ---------- Previous post was at 04:01 AM ----------
Bro i have googled the errors and i found that it is compatibility issue.What is your mobiles rom version tell me.It is given on the back side of the phone,remove the battery and check. I will send you the download link.
luvchandu said:
Bro i have googled the errors and i found that it is compatibility issue.What is your mobiles rom version tell me.It is given on the back side of the phone,remove the battery and check. I will send you the download link.
Click to expand...
Click to collapse
here is shot of phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thanks, but i have the correct ROM. see
downloaded from https://firmwarefile.com/karbonn-titanium-octane-plus
Related
Hi,
I unlocked the bootloader of my SK17i via the testpoint, now I am trying to install a custom kernel (rage kernel).
It seems that there is no way for the device to go to "fast boot mode" it goes to "flash mode". I really don't know what the is going.
I even tried the "Reboot into fast boot" option, nothing happened..
I installed without any error the drivers.exe file that was into the flash tool (OS: windows XP SP3)
The firmware is 4.0.2.a.0.62, flashtool version: flashtool-0.9.10.1
here is the log of the flash tool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you in advance for any info/help
First of all - Did you install the fastboot driver for your phone?
Also,did you hold down volume up button while connecting your phone to pc?
Also again,is your phone have status Bootloader Unlock Allowed : No?If yes,you can't use fastboot sorry...even without unlocking bootloader,the device with yes status can access fastboot
Sent from my LT28h using xda premium
It seems it was an issue with the USB ports! When I connect the mobile to any USB 1.1 port (its an old Thinkpad, as my main system runs win8x64 and its not easy to install non signed drivers there..) the XP did not pop up the info that found "fastboot device" etc etc. After I used an USB 2.0 PCMCIA card everything went well!
Just to reply to your questions, the Bootloader unlock status is YES, I connected the XMP when I pressed the volume UP (notification LED was Blue) and as I mention I installed all the drivers from the drivers.exe that came with the flashtool. It seems that the device cannot connected to fastboot mode using USB 1.1 ports...
I have the same problem. I am in cm10 now with their extended kernel. But now, when I try to flash any kernel, my phone desn't connect with flashboot mood. It always connect with flash mood. I have installed proper drivers.
So, why this is happening?
Please
Sent from my Xperia Mini Pro using xda premium
xenos11 said:
I have the same problem. I am in cm10 now with their extended kernel. But now, when I try to flash any kernel, my phone desn't connect with flashboot mood. It always connect with flash mood. I have installed proper drivers.
So, why this is happening?
Please
Sent from my Xperia Mini Pro using xda premium
Click to expand...
Click to collapse
Are you connected too on an USB 1.1 port?
update drivers via flashtool...
check list ur device and fastboot mode,install
enjoy...
No, with 2.0 port.
But my problem solved automatically!!!!
Sent from my SK17i using xda premium
sir,
when i connect my phone in fast boot mode the blue led glows,but my system says device does not recognized ....
i tried changing ports , they all work fine with any other devices ,even when my phone is in data storage mode ....
but in fastboot mode it says device does not recognised.....i reintalled all the drivers....also its win 8.1 ....and my phone
runs on cm11 ..... or else if you could suggest any other method for flashing kernel ....
thankyou
Since SLX doesn't detect my SD Card I wanna go back to STOCK but when i try to flash i get this
With SP Tool v3:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
With SP Tool v.5
Drivers installed and working, correct STOCK (8GB),pressed red button, no other USB devices, Antivirus turned off but nothing
Every STOCK version i have found acting same ( S124, S222, S223, S226 )
Now when i turn it on i have message =>TOOL DL image fail !!!!!!!!!!!!!!!!!!!!!!
Did i broke it permanently !!!!!!!!!!!!!!!!!!!!! Pls say i didn't
HELP!!!!!!!!!!
yrakun said:
Now when i turn it on i have message =>TOOL DL image fail !!!!!!!!!!!!!!!!!!!!!!
Did i broke it permanently !!!!!!!!!!!!!!!!!!!!! Pls say i didn't
HELP!!!!!!!!!!
Click to expand...
Click to collapse
Hi. Try to reflash again with FlashTool 3.
This time follow all the steps and when it gives the error close flashtool and reload again. plug the cable on your phone. remove the case of your phone and press the red small button for 20 secconds. now press firmware upgrade and release the button. Tell me what is going on. You could try this steps with flashtool 5 too.
Waiting for reply.
stympy said:
Hi. Try to reflash again with FlashTool 3.
This time follow all the steps and when it gives the error close flashtool and reload again. plug the cable on your phone. remove the case of your phone and press the red small button for 20 seconds. now press firmware upgrade and release the button. Tell me what is going on. You could try this steps with flashtool 5 too.
Waiting for reply.
Click to expand...
Click to collapse
I followed tutorial by every letter
Drivers r installed without any problem
Bouth yours "autoinstall drivers" and with manual"installation trough Device Manager worked normally
DA DL is checked (on SP Tool v.3 and v.5)
When i try with relase button while connected to PC with v.3 i get red 100% bar witch instantly disappear and after 1 minute i got message :
With SP tool v5 i get message "Unrecognized ROM detected"
H
yrakun said:
I followed tutorial by every letter
Drivers r installed without any problem
Bouth yours "autoinstall drivers" and with manual"installation trough Device Manager worked normally
DA DL is checked (on SP Tool v.3 and v.5)
When i try with relase button while connected to PC with v.3 i get red 100% bar witch instantly disappear and after 1 minute i got message :
With SP tool v5 i get message "Unrecognized ROM detected"
Click to expand...
Click to collapse
Hi. Did you tried to flash S136 ROM?
Please describe your phone:
What was the original ROM ?
Post a picture of your phone!
It is made before or after 03.2014?
Did you tried another scatter file to see what is going on ?
Did you tried to flash first the preloader and then after preloader flash, to flash pressing download button your rom?
Sorry for the delay but i installed Windows for every case (to exclude possibility of corrupted Intel USB drivers) and becouse i was pissed off . After installation of Windows i got same problem, but in 203 attempt :silly: i done next:
Pressed red button ( like countless time before), started SP Tool v.3 and loaded STOCK ROM S124 ROW (which i downloaded long time ago ). NOW, while SP Tool checking ROM i connected USB and after release button.
I done this same thing at least for 50 times and i don't know why worked this time
I installed S124 because i wanna install SLXROM, and as far i understood SLXROM doesn't detect SD Card when you flash it over 4.4.x
Anyway i lost minimum 5 hours for this (and lost my Windows during the process )
Stympy tnx for trying to help
Hello,
I bought this product : .aliexpress.com/item/Original-Xiaomi-Redmi-Note-2-TD-TDD-Mobile-Phone-MTK6795-Octa-Core-5-5-1920X1080P-2GB/32463256279.html?spm=2114.01020208.3.1.OUID3w&ws_ab_test=searchweb201556_1_79_78_77_80,searchweb201644_5,searchweb201560_6[/url]
After few days I put developer room via mi PC manager( C: xiaomi/downloads/gucci/rom/5.11 ......) but my sound was not good.
I found on youtube video to root phone cwm or twrp some like that, I bricked my phone soft. After I try via minimal fastboot and put my phone in fastboot mode and put on MI pc manager to flash room but in middle of transfer computer show blue screen and transfer interrupted.
Now my phone turn on show Mi logo and restart, I can not enter in fastboot mode (vol down plus power btn)
I instal vcom driver preloader try 2 computer, every usb port- Sp flash tool not show red line- and after I put out cable show broom error 1013 or 2005 (i have original usb Mi cable and also try other usb cable.
I try to found test points but not have.
Please help me.
Thank in advance.
blagotan said:
Hello,
I bought this product : .aliexpress.com/item/Original-Xiaomi-Redmi-Note-2-TD-TDD-Mobile-Phone-MTK6795-Octa-Core-5-5-1920X1080P-2GB/32463256279.html?spm=2114.01020208.3.1.OUID3w&ws_ab_test=searchweb201556_1_79_78_77_80,searchweb201644_5,searchweb201560_6[/url]
After few days I put developer room via mi PC manager( C: xiaomi/downloads/gucci/rom/5.11 ......) but my sound was not good.
I found on youtube video to root phone cwm or twrp some like that, I bricked my phone soft. After I try via minimal fastboot and put my phone in fastboot mode and put on MI pc manager to flash room but in middle of transfer computer show blue screen and transfer interrupted.
Now my phone turn on show Mi logo and restart, I can not enter in fastboot mode (vol down plus power btn)
I instal vcom driver preloader try 2 computer, every usb port- Sp flash tool not show red line- and after I put out cable show broom error 1013 or 2005 (i have original usb Mi cable and also try other usb cable.
I try to found test points but not have.
Please help me.
Thank in advance.
Click to expand...
Click to collapse
Wrong preloader drivers, I guess.
Have a look at the alcatel drivers posted somewhere, those work for me.
blagotan said:
Hello,
I bought this product : .aliexpress.com/item/Original-Xiaomi-Redmi-Note-2-TD-TDD-Mobile-Phone-MTK6795-Octa-Core-5-5-1920X1080P-2GB/32463256279.html?spm=2114.01020208.3.1.OUID3w&ws_ab_test=searchweb201556_1_79_78_77_80,searchweb201644_5,searchweb201560_6[/url]
After few days I put developer room via mi PC manager( C: xiaomi/downloads/gucci/rom/5.11 ......) but my sound was not good.
I found on youtube video to root phone cwm or twrp some like that, I bricked my phone soft. After I try via minimal fastboot and put my phone in fastboot mode and put on MI pc manager to flash room but in middle of transfer computer show blue screen and transfer interrupted.
Now my phone turn on show Mi logo and restart, I can not enter in fastboot mode (vol down plus power btn)
I instal vcom driver preloader try 2 computer, every usb port- Sp flash tool not show red line- and after I put out cable show broom error 1013 or 2005 (i have original usb Mi cable and also try other usb cable.
I try to found test points but not have.
Please help me.
Thank in advance.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Redmi note 2 rom was hermes not gucci. Miflash can detected your phone? If can, then quit miflash and run windroid and selected redmi note 2. Read post #11 on this thread: http://forum.xda-developers.com/redmi-note-2/help/redmi-note-2-downgrade-upgrade-problem-t3243079. Hope it help.
Sent from my 2014817 using Tapatalk
My phone is now bricked because I tried to flash the stock ROM(4.4.2) to my phone(6.0.1). At the time, I didn't know that you must format the phone before I guess, "downgrading" it. After I searched on google that I should format it, I went to SP Flash Tool to format it, and the phone got formatted. Now, all I need to do is to flash the stock ROM right? So I did flash the stock ROM to my phone, made sure that VCOM drivers are installed, using the latest version of SP Flash Tool. BUT, when I connected the phone to my laptop(through USB), the laptop detected it, when I press the Download button on the SP Flash Tool it's just at 0%. I tried to use the Firmware upgrade but still, stuck at 0%. I tried it on another PC and still, no luck. What do I do??? PLEASE HELP. I have until afternoon to fix it on my own because I'll give it to the local mobile repair shop.
BTW, the phone is still charging as I'm writing this thread
First of all install the drivers to your pc
Then, enable usb debugging in developer options in settings
Then, connect your phone
Now check whether pc recognize your phone if yes
Then, power off your phone
Now find the scatter file in sp flash tool and then click on download button
After it connect your switched off phone to pc with a usb cable
You will see that sp flash tool will recognize your device and start formatting and then downloading....
All this process will takes only 4-5 minutes at most.
shashank_4412 said:
First of all install the drivers to your pc
Then, enable usb debugging in developer options in settings
Then, connect your phone
Now check whether pc recognize your phone if yes
Then, power off your phone
Now find the scatter file in sp flash tool and then click on download button
After it connect your switched off phone to pc with a usb cable
You will see that sp flash tool will recognize your device and start formatting and then downloading....
All this process will takes only 4-5 minutes at most.
Click to expand...
Click to collapse
I can't turn on USB Debugging nor access my phone it is bricked and I can't fix it because SP Flash Tool won't recognize the phone and start
AjTheKid said:
I can't turn on USB Debugging nor access my phone it is bricked and I can't fix it because SP Flash Tool won't recognize the phone and start
Click to expand...
Click to collapse
I fixed mine by connecting the test point
You must open your phone and connect ground (any wire to ground) and find the preloader testpoint
Mine was the second test point near the volume control and power button next to the sim or black cable under the orange plastic covering the connector
I dont have the picture but i can give you an example (not s860 but similar)
WARNING: FOR PEOPLE WHO KNOW WHAT THEY ARE DOING!
BE CAREFUL OR YOUR PHONE WILL BE DEAD!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(not actual photo)
Those are test points, find a wire (any electrical wire) screw it to the screw that's holding the motherboard (for ground) and try each one of the test point, be careful not to connect the wire to vcc,vcharge or any 4.xx pins (if you were checking using a multimeter)
Here's a video for disassembling the phone : https://www.youtube.com/watch?v=Ry37RjmnZRo
And here's for reference : http://forum.gsmhosting.com/vbb/f672/lenovo-a850-dead-boot-how-easy-jtag-1868940/index2.html
http://forum.gsmhosting.com/vbb/f958/a850-lenovo-dead-while-flashing-1888753/
After you find the test point, the phone will be detected by the computer as vcom or something, quickly install the mtk65xx driver (if you haven't install yet) and flash the stock rom using sp flash.
Best of luck.
Hi,
I need to put my device in Emergency Download Mode (EDL) in order to recover the boot and fix the bootloop (fastboot not working).
Where is the test points, or how to figure them out?
See the phone schemas below:
Redmi Note 10 Pro 5G (chopin)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Solved without using EDL test points. see The Solution below.
BIG Thanks goes to @NOSS8 for his help.
ramiro2016 said:
Hi,
I need to put my device in Emergency Download Mode (EDL) in order to recover the boot and fix the bootloop (fastboot not working).
Where is the test points, or how to figure them out?
See the phone schemas below:
Redmi Note 10 Pro 5G (chopin)
Click to expand...
Click to collapse
this phone did not need edl or test point.
https://forum.xda-developers.com/t/...-after-flashing-gsi-rom.4448229/post-86995731
@NOSS8 I've tested this method out. The USB serial device drive shows for about 3 seconds and MTK META UTILITY only detects it when I uninstall the driver for the USB serial device. Then it didn't succeed due to the driver I guess. Look at the result in the following image.
Note:
I'm using Windows 11. For this, I will install Windows 7. I will redo the process. When I finish, I will provide you with the results.
ramiro2016 said:
@NOSS8 I've tested this method out. The USB serial device drive shows for about 3 seconds and MTK META UTILITY only detects it when I uninstall the driver for the USB serial device. Then it didn't succeed due to the driver I guess. Look at the result in the following image.
Note:
I'm using Windows 11. For this, I will install Windows 7. I will redo the process. When I finish, I will provide you with the results.
Click to expand...
Click to collapse
https://xiaomitools.com/sp-flash-tool-en/
there is also this tool (new not tested).
https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
https://gearupwindows.com/how-to-disable-driver-signature-enforcement-on-windows-11-10/
check for program update
@NOSS8 Not working neither in windozs 11 nor in windows 7, I've tested a lot of MediaTek drivers with no luck. Even the new app (Rom2Box) is not detecting the USB serial at all.
Look at the attached images of test I've done.
ramiro2016 said:
@NOSS8 Not working neither in windozs 11 nor in windows 7, I've tested a lot of MediaTek drivers with no luck. Even the new app (Rom2Box) is not detecting the USB serial at all.
Look at the attached images of test I've done.
Click to expand...
Click to collapse
This is not the latest version(V52).
https://mega.nz/file/H0MW3BST#PfzzmSwbncT5aV7A1ZhWztQonLj4CgJLDHbXoRtCu54
Maybe useful
https://www.bypassfrpfiles.com/2021...h_Secure_Boot_Disable_Tool_V52_Latest_Version
BTW: I don't have and would never have a xiaomi Mediatek and therefore never use these tools for Mediatek, that's why I can help you for the links but not for the use of these tools.
If it still doesn't work post the latest log.
Unfortunately, even the latest version v52 doesn't work, but this tool helped me solve the problem.
https://github.com/bkerler/mtkclient (You need to follow the readme document).
I've used the mtk_gui, and after it got connected, I sent my original firmware boot.img that is currently installed on my mobile after renaming it to boot.bin to the device partitions boot_a and boot_b
Rebooting the device got me the original recovery mode and the fastboot mode.
Then I used the MiFlash tool to flash my phone using flash_all.bat
Every thing is working fine know.
BIIIIIIIIIIIG Thanks goes to @NOSS8 for helping me all the way to the solution .