My g925f is now stuck in an error has occured while updating device software blah blah blah. It said to use smart switch pc to use the emergency software recovery but smart switch says my phone is not supported. Guys please need help asap
@Gbaaqty no no no. I mean I softbricked my phone and now it's stuck in "An error has occurred while updating the device software..." and smart switch says my phone is unsupported
Xianead said:
@Gbaaqty no no no. I mean I softbricked my phone and now it's stuck in "An error has occurred while updating the device software..." and smart switch says my phone is unsupported
Click to expand...
Click to collapse
Try to flash back. Sometimes cable contact issue. Don't worry about download mode. Or is it different than 'software upgrade has encountered an issue'?
Sent from my GT-N7000
Rosli59564 said:
Try to flash back. Sometimes cable contact issue. Don't worry about download mode. Or is it different than 'software upgrade has encountered an issue'?
Sent from my GT-N7000
Click to expand...
Click to collapse
it says exactly "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software
Xianead said:
it says exactly "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software
Click to expand...
Click to collapse
It illustrates a phone conected to pc?. I must have forgot it.
Sent from my GT-N7000
Rosli59564 said:
It illustrates a phone conected to pc?. I must have forgot it.
Sent from my GT-N7000
Click to expand...
Click to collapse
Yeah it was like that. But I somehow got it to download mode now
Xianead said:
Yeah it was like that. But I somehow got it to download mode now
Click to expand...
Click to collapse
Try Booting Into Download mode Then Try To restore
osman34 said:
Try Booting Into Download mode Then Try To restore
Click to expand...
Click to collapse
Yeah I was able to fix it by flashing my region's firmware and pit file. Thanks anyway
Related
Hi,
I recently bought a gs2 however its not working, basically the guy who sold it to me was trying to upgrade it to latest software via xda apparently and now its blocked. it just flashes the screen, black screen, you can see the yellow triangle when i try to put it into recovery or download mode. i have done some research but cant get my head round it. it comes up on kies as pda:lpt/phone:lq6/csc:lpa(xeu) as current firmware version. i have tried using odin to re set it and flash it also however odin wont read it and wont come up yellow , i have removed and re set the drivers still not luck.
i am not very clued up on android as i used to use blackberry.
can anyone please help me on what to do and how to do it?
thank you
kuq-e-zi said:
... when i try to put it into recovery or download mode...
Click to expand...
Click to collapse
What do you me by "try"? Can you enter download mode or not?
fxrb said:
What do you me by "try"? Can you enter download mode or not?
Click to expand...
Click to collapse
He can, because he stated that he tried to reset it via odin...
@OP , take a look at the USB port where you charge the phone... Do you see something wrong with it?...
Sent with a homing pigeon
riro1612 said:
He can, because he stated that he tried to reset it via odin...
@OP , take a look at the USB port where you charge the phone... Do you see something wrong with it?...
Sent with a homing pigeon
Click to expand...
Click to collapse
the usb is ok, it charges the phone, connects to kies as well but not odin. i bought a usb jig as well. when i connect the jig it flashes "downloading" though it hard to see as its flashing non stop however nothing else happens.
kuq-e-zi said:
hard to see as its flashing non stop however nothing else happens.
Click to expand...
Click to collapse
You mean the screen keeps flickering?
I was trying to upgrade to 4.3 through kies (I9300XXUGMK6) on my dutch non-rooted I9300, however when downloading the firmware to my device it was stuck at 4% and rebooted. Now I get the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.". Already tried that but it fails every time. I've also tried flashing the firmware with odin (like posted here: http://forum.xda-developers.com/showthread.php?t=1671969 ) but it also fails everytime.
I've tried to go in recovery mode (Volume up + home + power) but get the same firmware error message. Does anyone know how I can get my phone to work again?
---Fixed---
Used another cable and tried the emergency recovery again, this fixed it and updated it to android 4.3
RMCA said:
I was trying to upgrade to 4.3 through kies (I9300XXUGMK6) on my dutch non-rooted I9300, however when downloading the firmware to my device it was stuck at 4% and rebooted. Now I get the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.". Already tried that but it fails every time. I've also tried flashing the firmware with odin (like posted here: http://forum.xda-developers.com/showthread.php?t=1671969 ) but it also fails everytime.
I've tried to go in recovery mode (Volume up + home + power) but get the same firmware error message. Does anyone know how I can get my phone to work again?
Click to expand...
Click to collapse
Was the process stuck at downloading process or while flashing it? While the firmware is getting downloaded no flashing process is done.. Can you please explain it properly.. Have you tried emergency recovery?
suyash1629 said:
Was the process stuck at downloading process or while flashing it? While the firmware is getting downloaded no flashing process is done.. Can you please explain it properly.. Have you tried emergency recovery?
Click to expand...
Click to collapse
It was stuck while downloading from the pc to my phone, and yes I have tried the emergency recovery but it will not download to my phone.
Update: I have found the solution, it was a faulty cable! That was why it was stuck on downloading. Thanks for asking the right questions!
RMCA said:
It was stuck while downloading from the pc to my phone, and yes I have tried the emergency recovery but it will not download to my phone.
Update: I have found the solution, it was a faulty cable! That was why it was stuck on downloading. Thanks for asking the right questions!
Click to expand...
Click to collapse
What does it exactly say when you flash from ODIN? can you provide any screenshot(showing the errors)?
suyash1629 said:
What does it exactly say when you flash from ODIN? can you provide any screenshot(showing the errors)?
Click to expand...
Click to collapse
Thanks for the help but I have found the problem. It was a faulty cable. I cannot provide any screenshots for future reference because I did not make any. But thanks for your help!
RMCA said:
Thanks for the help but I have found the problem. It was a faulty cable. I cannot provide any screenshots for future reference because I did not make any. But thanks for your help!
Click to expand...
Click to collapse
Anyways, its good to know that the problem was only a faulty cable
So i installed throw Odin, a 925F firmware to an 925X Live demo unit because i thought it will work (wrong thought ). So now whenever i try to turn on the phone, i get a message saying "An error has ocurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software".
When i try using Smart Switch, it says that the Device is not compatible.
Odin does recognizes the phone, but i can not find the correct firmware to flash.
Is there any link that could help me
Thanks!
fausto1124 said:
So i installed throw Odin, a 925F firmware to an 925X Live demo unit because i thought it will work (wrong thought ). So now whenever i try to turn on the phone, i get a message saying "An error has ocurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software".
When i try using Smart Switch, it says that the Device is not compatible.
Odin does recognizes the phone, but i can not find the correct firmware to flash.
Is there any link that could help me
Thanks!
Click to expand...
Click to collapse
i dont think there is solution for live unit
osman34 said:
i dont think there is solution for live unit
Click to expand...
Click to collapse
Live units are not full functional phones, they for example dont have mobile modem etc, also they don't have a real imei code...
Not much to do with them
Verstuurd vanaf mijn SM-G925F met Tapatalk
Take A look on this Thread
http://forum.xda-developers.com/galaxy-s6/general/g920x-master-thread-guides-firmwares-t3267738
Hello, i got a big problem and needed HELP!
Today i got my Note 4...
so i tryed to unlock the bootloader, bad thing did not logg in at the device.
i booted the mobile in fastboot mode and started the official unlock tool.
until 50% it went quite well then i got an error message:
couldn't verify device
current account is differnet from the account info on the device
so i tryed to boot again but was in a bootloop...
i tryed also flashing a new rom (nikel_global_images_7.4.14_20170414.0000.00_6.0_global_b5d5f15e0e.tgz) and again i got an error
"flash boot error"
hope somebody can help
p.s. sorry for my poor english
Following
Did you read this?
dao80 said:
...i tryed also flashing a new rom (nikel_global_images_7.4.14_20170414.0000.00_6.0_global_b5d5f15e0e.tgz) and again i got an error...
Click to expand...
Click to collapse
Are you sure you are using MTK Variant?
akil777 said:
Did you read this?
Are you sure you are using MTK Variant?
Click to expand...
Click to collapse
yes im sure, i tryed this already and still in bootloop
althoug it says download ok
dao80 said:
yes im sure, i tryed this already and still in bootloop
althoug it says download ok
Click to expand...
Click to collapse
Did you use Sp flash tool?, if yes You should tick all except preloader. You will have to wait 5-15mins for the phone to boot up.
akil777 said:
Did you use Sp flash tool?, if yes You should tick all except preloader. You will have to wait 5-15mins for the phone to boot up.
Click to expand...
Click to collapse
yes i used this tool, after rebooting the mi logo is on the screnn for about 7 secounds then the mobile boots again and again...
;(
dao80 said:
yes i used this tool, after rebooting the mi logo is on the screnn for about 7 secounds then the mobile boots again and again...
;(
Click to expand...
Click to collapse
I have never experienced that.. I think you should send it to your mobile repair center.. Be patient,, It might take few days. Don't panic,
akil777 said:
I have never experienced that.. I think you should send it to your mobile repair center.. Be patient,, It might take few days. Don't panic,
Click to expand...
Click to collapse
i m already looking for a mobile repair center here who can repair xiaomi mobiles...
but so fare all numbers i called are not in service anymore or dont repair xiaomi...
dao80 said:
i m already looking for a mobile repair center here who can repair xiaomi mobiles...
but so fare all numbers i called are not in service anymore or dont repair xiaomi...
Click to expand...
Click to collapse
check this http://en.miui.com/thread-491655-1-1.html
You tried putting phone in fast boot mode (volume down then power). Then just flash the stock firmware?
robjbw said:
You tried putting phone in fast boot mode (volume down then power). Then just flash the stock firmware?
Click to expand...
Click to collapse
yes i tried china and global
but only bootloop
but to be on the save side, where to i find a the stock rom (flashable with the miflashtool)?
dao80 said:
yes i tried china and global
but only bootloop
but to be on the save side, where to i find a the stock rom (flashable with the miflashtool)?
Click to expand...
Click to collapse
flash done with mi flash? If got error then try with deep flash cable. see yt tutorials
itsmedRb said:
flash done with mi flash? If got error then try with deep flash cable. see yt tutorials
Click to expand...
Click to collapse
deepflash is also possible for mtk devices?
robjbw said:
You tried putting phone in fast boot mode (volume down then power). Then just flash the stock firmware?
Click to expand...
Click to collapse
tried it again with the mi flash tool i got following error
80x80004005: FAILED (remote: download for partition 'boot' is not allowed
Hey Guys, i soveld the problem...
AND F**K it was a quite easy solution...
i tried so hard was crying and a kind of very desperate...
anyways i aslo wrot a mail to mi and they did not help at all...
they even say i should lock in at the device if im in a bootloop, kinda funny?
anyways so i drained the batterie and nearly about to give up this device....
BUT i give it one last try, plugt it in and booted it... it took a while but after a while i finaly was able to boot the Phone and set it up...
so this threat can be closed...
thank you guys for your help
Hello Every one , mine has Xperia 1 iii bc62 ariginal firmware :61.0.A.11.23 release-keys, when i flashed with lasted firmware 61.1a.11.36 after completed with the newfasher tool i unplug the device press power button but it boot loop several time and show error "Your device is corrupt it cant be trusted and will not boot"
I try with different firmware but get no luck . can some one experient help me with that. thanks
tiinpii said:
Hello Every one , mine has Xperia 1 iii bc62 ariginal firmware :61.0.A.11.23 release-keys, when i flashed with lasted firmware 61.1a.11.36 after completed with the newfasher tool i unplug the device press power button but it boot loop several time and show error "Your device is corrupt it cant be trusted and will not boot"
I try with different firmware but get no luck . can some one experient help me with that. thanks
Click to expand...
Click to collapse
Question: 1. Did you wipe user Data and 2. Did you root it before or after updating?
Ainz_Ooal_Gown said:
Question: 1. Did you wipe user Data and 2. Did you root it before or after updating?
Click to expand...
Click to collapse
Hello, 1 no i didn't
2. I didn't not root it also
tiinpii said:
Hello, 1 no i didn't
2. I didn't not root it also
Click to expand...
Click to collapse
The firmware that you tried to install, is that your "native"?! Is it for XQ-BC62? If yes then why are you trying to update with flashing instead of normal update or xperia companion?!
Also is it for the same country/region as the original? I had the same error when by mistake I downloaded a UK version instead of EEA.
tiinpii said:
大家好，我的有 Xperia 1 iii bc62 原始固件：61.0.A.11.23 释放键，当我用最新的固件 61.1a.11.36 刷新时，在使用 newfasher 工具完成后，我拔下设备，按下电源按钮，但它启动循环几个时间并显示错误“您的设备已损坏，无法信任且无法启动”
我尝试使用不同的固件，但没有成功。有人可以帮助我吗？谢谢
Click to expand...
Click to collapse
你应该没有解锁手机，请刷入原来的固件版本再解锁刷机，我也有类似的问题就是这样解决的。希望能帮助到你
tiinpii said:
Hello Every one , mine has Xperia 1 iii bc62 ariginal firmware :61.0.A.11.23 release-keys, when i flashed with lasted firmware 61.1a.11.36 after completed with the newfasher tool i unplug the device press power button but it boot loop several time and show error "Your device is corrupt it cant be trusted and will not boot"
I try with different firmware but get no luck . can some one experient help me with that. thanks
Click to expand...
Click to collapse
I have just had the same issue using newflasher. I don't believe i made any mistake during the process. Had to do a Xperia Companion Repair to repair. Resulting in a complete loss of data.
defsix said:
I have just had the same issue using newflasher. I don't believe i made any mistake during the process. Had to do a Xperia Companion Repair to repair. Resulting in a complete loss of data.
Click to expand...
Click to collapse
What version of newflaher are you using?
Latest version from end of last year. I actually checked this after it failed
What did you type before you flash like yes and no in the beginning ?
defsix said:
Latest version from end of last year. I actually checked this after it failed
Click to expand...
Click to collapse
99% of all failures I have had when using Newflasher have been caused from poor USB connection. I now have a very specific USB cable that I only use when flashing files to Sony devices. I also close nearly all background programs and disconnect any non essential USB devices.
If you all use newlfasher type all N when it ask for Y or N except for keep userdata thats an Y, thats it, never had an issue with Newflasher on my Xperia 1 iii.
bentree said:
99% of all failures I have had when using Newflasher have been caused from poor USB connection. I now have a very specific USB cable that I only use when flashing files to Sony devices. I also close nearly all background programs and disconnect any non essential USB devices.
Click to expand...
Click to collapse
Yeah, first time I didn't use the Sony Original cable... Lesson learned.
Pandemic said:
What did you type before you flash like yes and no in the beginning ?
Click to expand...
Click to collapse
Sorry, I missed your question. No to all the questions, with reboot at the end
tiinpii said:
大家好，我的有Xperia 1 iii bc62 ariginal固件：61.0.A.11.23释放键，当我使用最新的固件61.1a.11.36刷新时，使用newfasher工具完成后，我拔下设备按电源按钮，但它启动循环几次并显示错误“您的设备已损坏，无法信任，无法启动”
我尝试使用不同的固件，但没有运气.有人可以帮我吗？谢谢
Click to expand...
Click to collapse
一定要解锁BL才能降级，建议网上搜索解锁教程
My Xperia 1 iii have same issue, also it keep showing "Your device is corrupt it cant be trusted and will not boot Your device will be powered off in 5 second"
I've tried all method to put it to recovery mode but failed.
Any one could help?
For my XQ-BC62, I ended up getting the device is corrupt issue after flashing the rom via fastboot instead of via fastbootd. (it's confusing bc you have to use fastboot to unlock the bootloader, not fastbootd). To fix it, Xperia companion software told me to use Emma, so I downloaded that and was able to restore stock firmware to the device.