Dear DEV, my Lenovo A6000 Dead to chase into device manager computer port and COM 9006 and 24 states Lokl hard disk appeared about 11 Computer format due Security region on computer repeatedly asks you to format is not. Qfil to flash the flasher download fail switch to edl () download fail switch to edl fail system exception: firehose is having trouble such as fail. 'i am very upset right to some measure,a assist me soon sir,please.
I have a Lenovo A6000 and after a first attempt of re-flashing to factory firmware i got an error of unable to connect now my phone is unable to startup when i try to reboot i get a long vibration and that's i PLS HELP
Dev Manager ORT HS-USB Diagnostics 9006
This is an error tha i get it now every time i try o re-flash
//**
Download Fail:System.Exception: Failed to Switch to Emergency Download mode
at QC.QMSLPhone.Phone.QPHONEMS_SwitchToEDL()
at QC.SwDownloadDLL.SwDownload.SwitchToEDL()
Download Fail:Switch To EDL FailSystem.Exception: FireHose Fail
at QC.SwDownloadDLL.SwDownload.SwitchToEDL()
at QFIL.Tech.DownloadTech.SwitchToEDL()
Finish Download
**//
Is here a way o take the phone out of Emergency Download Mode?
I really need a Qualcomm Twicker advice out of options !
Hi all,
I found VIVO Y51 testpoint and successfully revive my friend's dead phone due to corrupted bootloader (in pursuit of trying to unlock it .. lesson learned *sigh*). So, I would like to share my findings so that it would help others reviving their phone.
You need:
- QPST firmware for your Y51 eg: Y51_PD1510F_EX_A (google it pls)
- open your phone and disconnect battery
- open QPST (make sure you already install the 9008 driver)
- IMPORTANT! make sure you select the file with no_qcn so that it won't erase your imei for download eg: rawprogram_unsparse_no_qcn_PD1510F_EX.xml (I tried other xml and it erased the imei, luckily I have backup the qcn before the bootloader went corrupted)
- connect usb and short the testpoint (refer to attachment)
- when QPST detected port 9008, connect the battery, press download and wait till finish.
- after flashing is complete, disconnect and reconnect the battery. Assemble the phone and boot it normally.
Sorry for unable to write a full step-by-step right now because it is already late at my place (4am).
Thank you
Thank you
I also bricked my y51 and got it replaced it at service center,
But i've figured out how to unlock its bootloader
First we have to upgrade to PDF1510 2.6.7 lollipop 5.1.1 version
then follow the steps in this thread
need help
Hello SIr,
Tried it with my hard bricked vivo y51l. but got the below error. pl help.
Start Download
Program Path:\android\Vivo_Y51_PD1510F_EX_A_1.16.2_LA.BR.1.2.1-01210-8x16.0_msm8939\Firmware\prog_emmc_firehose_8916.mbn
COM Port number:20
Sahara Connecting ...
Sahara Version:2
Start Sending Programmer
Sending Programmer Finished
Switch To FireHose
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Ack Raw Data:False
Skip Write:False
Always Validate:False
Use Verbose:False
COM Port number:20
Sending NOP
NOP: Fail Code: 9
Unable to send FireHose NOP, Device is not in Firehose mode !
Download Fail:System.Exception: Failed to send Firehose NOP to the phone.
at QC.QMSLPhone.Phone.QPHONEMS_FireHoseNOP()
at QC.SwDownloadDLL.SwDownload.FireHoseDownloadImage(Boolean bResetPhone, List`1 rawprogramFilesList, List`1 patchFilesList, Single& fImageSizeInMB, Single& fThroughput)
Download Fail:FireHose Fail FireHose Fail
Finish Download
It's a common port error
SIDD2506 said:
Hello SIr,
Tried it with my hard bricked vivo y51l. but got the below error. pl help.
Start Download
Program Path:\android\Vivo_Y51_PD1510F_EX_A_1.16.2_LA.BR.1.2.1-01210-8x16.0_msm8939\Firmware\prog_emmc_firehose_8916.mbn
COM Port number:20
Sahara Connecting ...
Sahara Version:2
Start Sending Programmer
Sending Programmer Finished
Switch To FireHose
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Ack Raw Data:False
Skip Write:False
Always Validate:False
Use Verbose:False
COM Port number:20
Sending NOP
NOP: Fail Code: 9
Unable to send FireHose NOP, Device is not in Firehose mode !
Download Fail:System.Exception: Failed to send Firehose NOP to the phone.
at QC.QMSLPhone.Phone.QPHONEMS_FireHoseNOP()
at QC.SwDownloadDLL.SwDownload.FireHoseDownloadImage(Boolean bResetPhone, List`1 rawprogramFilesList, List`1 patchFilesList, Single& fImageSizeInMB, Single& fThroughput)
Download Fail:FireHose Fail FireHose Fail
Finish Download
Click to expand...
Click to collapse
This happened to me, it's just a port problem.
chamge port it will work.
Will this work on hard bricked vivo y55l? Plss I need help, I tried to flash it but i got errors too. It wont start again after I unplugged it, its dead... I broked it, its my cousin phone... Plss help
my z5 is hard bricked when try to updat manually to android 9 firmware
i can enter to recovery but got some erros when flashing
device when power on appears lenovo logo and the screen goes black, after a while appears qualcom crashdump screen--
i can enter fastboot and EDL MODE..
I try many qfil versions..i got 3 firmwares for phone..and always get firehose error or sahara , or cant connect to service programmer..
any solution or phone is dead?
g8x only enters EDL mode. All partitions are gone.
When extracting rawprogram.xml, [!] "Error: extraneous data found IN version" is displayed and extraction fails.
teach me how to ubrick
Hello. I am having the same problem. Did you unbrik your phone?? If yes please tell me solutions thank you
Are you able to enter download mode or does it fastboot loop?
something happened in qfil and now I just go into edl mode that's it the computer doesn't even recognize the phone in anything other than qfil so if anybody has any tips on this I'd love to hear it
bro u all fkd up the partition table...so have to re write...or u can enter 9008 mode by shorting the pins in the motherboard.......for creating a partition table there is some video in YT ig