If anyone wants to follow along, you can read here: http://forum.xda-developers.com/showthread.php?t=3259281
Essentially I'm trying to compile CM 12.1 for the LG G Stylo and it works quite well. Video recording is the last thing not working and I'm just reaching out to see if anyone is familiar with what may be wrong. Here's the relevant lines of the adb logcat:
E/QCamera2HWI( 298): getParameters() mbLowluminanceCondition = 0, mbLowluminanceConditionForVideo = 0, mbBacklightCondition = 0
E/QCamera2HWI( 298): getParameters() Flash is not firing !!!
E/QCameraStateMachine( 298): stateMachine : m_state [2], evt [8]
E/QCameraStateMachine( 298): stateMachine : m_state [2], evt [13]
E/QCameraStateMachine( 298): stateMachine : m_state [2], evt [13]
I/ExtendedUtils( 298): Invalid HFR rate specified : 0
I/ExtendedUtils( 298): Invalid HSR rate specified : 0
W/ExtendedUtils( 298): Invalid HFR rate specified
D/MediaCodecSource( 298): bitrate:12000000, samplerate:0, channels:0
I/OMX-VENC( 298): Component_init : OMX.qcom.video.encoder.avc : return = 0x0
E/OMX-VENC( 298): set_parameter: metamode is valid for input port only
W/OMXNodeInstance( 298): [77:qcom.encoder.avc] component does not support metadata mode; using fallback
E/ACodec ( 298): [OMX.qcom.video.encoder.avc] storeMetaDataInBuffers (output) failed w/ err -1010
W/ACodec ( 298): do not know color format 0x7fa30c04 = 2141391876
W/ACodec ( 298): do not know color format 0x7f000789 = 2130708361
E/ACodec ( 298): [OMX.qcom.video.encoder.avc] does not support color format 39
E/ACodec ( 298): [OMX.qcom.video.encoder.avc] configureCodec returning error -2147483648
E/ACodec ( 298): [OMX.qcom.video.encoder.avc] configureCodec returning error -2147483648
E/ACodec ( 298): signalError(omxError 0x80001001, internalError -2147483648)
E/MediaCodec( 298): Codec reported err 0x80001001, actionCode 0, while in state 3
E/MediaCodec( 298): configure failed with err 0x80001001, resetting...
I/OMX-VENC( 298): Component Deinit
D/mm-camera( 305): cpp_module_handle_stream_crop_event:785 frame id 42 stream_crop.x=0, stream_crop.y=0, stream_crop.dx=1280, stream_crop.dy=720, width 0 height 0 identity=0x20002
I/OMX-VENC( 298): Component_init : OMX.qcom.video.encoder.avc : return = 0x0
I/OMX-VENC( 298): Component Deinit
E/StagefrightRecorder( 298): Failed to create video encoder
D/CameraSource( 298): reset: E
W/CameraClient( 298): attempt to use a locked camera from a different process (old pid 298, new pid 22939)
E/QCameraStateMachine( 298): stateMachine : m_state [2], evt [16]
D/CameraSource( 298): reset: X
E/MediaRecorder(22939): start failed: -2147483648
E/CAM_VideoModule(22939): Could not start media recorder.
E/CAM_VideoModule(22939): java.lang.RuntimeException: start failed.
E/CAM_VideoModule(22939): at android.media.MediaRecorder.start(Native Method)
E/CAM_VideoModule(22939): at com.android.camera.VideoModule$11.onStorageUpdateDone(VideoModule.java:1388)
E/CAM_VideoModule(22939): at com.android.camera.CameraActivity$18.onPostExecute(CameraActivity.java:2164)
E/CAM_VideoModule(22939): at com.android.camera.CameraActivity$18.onPostExecute(CameraActivity.java:2149)
I'm thinking it's really related to this commit being close, but not sure: https://github.com/TeamRegular/android_frameworks_av/commit/d5de1e7b636ba5673a2b20be8685287ff60fb487
Did some Googling.
W/ACodec ( 307): do not know color format 0x7fa30c04 = 2141391876
http://alumnus.caltech.edu/~heirich/styled-6/index.html
COLOR_QCOM_FormatYUV420SemiPlanar32m
W/ACodec ( 307): do not know color format 0x7f000789 = 2130708361
https://lists.freedesktop.org/archiv...er/043721.html
OMX_COLOR_FormatAndroidOpaque
Thoughts?
Related
I am trying to port SEMC Debrand Engine to Galaxy FIt using clean CM7 as base
So far it boots and then bootloops.
Logcat:
Code:
--------- beginning of /dev/log/main
I/cm ( 112): Welcome to Android 2.3.7 / Achotjan's_SEMC-Debrand-engine_v3
I/cm ( 113): _
I/cm ( 114): __ __ _ ___ _ _ __ ___ __ _ _ _ _ __ __))
I/cm ( 115): ((_ \(/'((_( ((\( ((_)((_( (('((\( ((`1( ((_)((_(
I/cm ( 116): )) _))
I/cm ( 117):
I/DEBUG ( 151): debuggerd: Jan 1 2013 02:59:43
--------- beginning of /dev/log/system
I/Vold ( 149): Vold 2.1 (the revenge) firing up
I/Netd ( 150): Netd 1.0 starting
D/Vold ( 149): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 149): Volume sdcard state changing 0 (No-Media) -> 2 (Pending)
D/Vold ( 149): Volume sdcard state changing 2 (Pending) -> 1 (Idle-Unmounted)
D/AndroidRuntime( 153):
D/AndroidRuntime( 153): >>>>>> AndroidRuntime START com.android.internal.os.ZygoteInit <<<<<<
I/AndroidRuntime( 153): Heap size: -Xmx32m
D/AndroidRuntime( 153): CheckJNI is OFF
I/ ( 154): ServiceManager: 0xad50
I/AudioHardwareMSM72XX( 154): get_audpp_filter
I/AudioHardwareMSM72XX( 154): open /system/etc/AudioFilter.csv success.
I/AudioHardwareMSM72XX( 154): EQ flag = 00.
I/AudioHardwareMSM72XX( 154): EQ flag = 00.
I/AudioHardwareMSM72XX( 154): EQ flag = 00.
D/AudioHardwareInterface( 154): setMode(NORMAL)
I/AudioHardwareMSM72XX( 154): Set master volume to 7.
I/QualcommCameraHardware( 154): getCameraInfo: IN
I/QualcommCameraHardware( 154): getCameraInfo: loading libqcamera at 0xb000e0e8
I/QualcommCameraHardware( 154): getCameraInfo: numOfCameras = 1
I/QualcommCameraHardware( 154): Camera sensor 0 info:
I/QualcommCameraHardware( 154): camera_id: 0
I/QualcommCameraHardware( 154): modes_supported: 1
I/QualcommCameraHardware( 154): position: 0
I/QualcommCameraHardware( 154): sensor_mount_angle: 90
V/QualcommCameraHardware( 154): getCameraInfo: dlclose(libqcamera)
I/QualcommCameraHardware( 154): getCameraInfo: OUT
D/AudioFlinger( 154): setParameters(): io 1, keyvalue routing=2, tid 216, calling tid 154
I/AudioFlinger( 154): AudioFlinger's thread 0xcc68 ready to run
I/AudioHardwareMSM72XX( 154): Routing audio to Speakerphone
D/AudioHardwareMSM72XX( 154): doAudioRouteOrMute() device 6, mMode 0, mMicMute 1, mBuiltinMicSelected 0, muted
I/AudioHardwareMSM72XX( 154): Routing audio to Speakerphone
D/AudioHardwareMSM72XX( 154): setVoiceVolume(1.000000)
I/AudioHardwareMSM72XX( 154): Setting in-call volume to 7 (available range is 0 to 7)
I/SamplingProfilerIntegration( 153): Profiler is disabled.
I/Zygote ( 153): Preloading classes...
E/Zygote ( 153): setreuid() failed. errno: 2
D/dalvikvm( 153): GC_EXPLICIT freed 48K, 77% free 239K/1024K, external 0K/0K, paused 4ms
I/bluetooth_ScoSocket.cpp( 153): Entry name = MY-CAR ScoTypes = 0x7f
I/bluetooth_ScoSocket.cpp( 153): Entry name = Motorola HF850 ScoTypes = 0x7
D/szipinf ( 153): Initializing inflate state
D/dalvikvm( 153): GC_FOR_MALLOC freed 2914K, 57% free 2209K/5123K, external 0K/0K, paused 75ms
D/dalvikvm( 153): GC_FOR_MALLOC freed 2634K, 52% free 2485K/5123K, external 0K/0K, paused 68ms
I/Zygote ( 153): ...preloaded 1829 classes in 5841ms.
D/Zygote ( 153): setreuid() error ignored, same uid.
D/dalvikvm( 153): GC_EXPLICIT freed 887K, 48% free 2685K/5123K, external 0K/0K, paused 55ms
I/Zygote ( 153): Preload resources disabled, skipped.
D/dalvikvm( 153): GC_EXPLICIT freed 25K, 49% free 2660K/5123K, external 0K/0K, paused 45ms
D/dalvikvm( 153): GC_EXPLICIT freed <1K, 49% free 2660K/5123K, external 0K/0K, paused 44ms
D/dalvikvm( 153): GC_EXPLICIT freed <1K, 49% free 2660K/5123K, external 0K/0K, paused 44ms
I/dalvikvm( 153): System server process 254 has been created
I/Zygote ( 153): Accepting command socket connections
I/sysproc ( 254): Entered system_init()
I/sysproc ( 254): ServiceManager: 0xbed50
I/SurfaceFlinger( 254): SurfaceFlinger is starting
I/SurfaceFlinger( 254): dithering enabled
I/SurfaceFlinger( 254): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
E/SurfaceFlinger( 254): Couldn't open /sys/power/wait_for_fb_sleep or /sys/power/wait_for_fb_wake
I/msm7k.gralloc( 254): using (fd=27)
I/msm7k.gralloc( 254): id = msmfb30_30001
I/msm7k.gralloc( 254): xres = 240 px
I/msm7k.gralloc( 254): yres = 320 px
I/msm7k.gralloc( 254): xres_virtual = 240 px
I/msm7k.gralloc( 254): yres_virtual = 640 px
I/msm7k.gralloc( 254): bpp = 32
I/msm7k.gralloc( 254): r = 24:8
I/msm7k.gralloc( 254): g = 16:8
I/msm7k.gralloc( 254): b = 8:8
I/msm7k.gralloc( 254): width = 38 mm (160.421051 dpi)
I/msm7k.gralloc( 254): height = 51 mm (159.372543 dpi)
I/msm7k.gralloc( 254): refresh rate = 1.34 Hz
D/libEGL ( 254): loaded /system/lib/egl/libGLES_android.so
D/libEGL ( 254): loaded /system/lib/egl/libEGL_adreno200.so
D/libEGL ( 254): loaded /system/lib/egl/libGLESv1_CM_adreno200.so
D/libEGL ( 254): loaded /system/lib/egl/libGLESv2_adreno200.so
E/libEGL ( 254): eglSetSwapRectangleANDROID:1909 error 3008 (EGL_BAD_DISPLAY)
I/SurfaceFlinger( 254): EGL informations:
I/SurfaceFlinger( 254): # of configs : 35
I/SurfaceFlinger( 254): vendor : Android
I/SurfaceFlinger( 254): version : 1.4 Android META-EGL
I/SurfaceFlinger( 254): extensions: EGL_KHR_image EGL_KHR_image_base EGL_KHR_image_pixmap EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_ANDROID_image_native_buffer EGL_ANDROID_swap_rectangle EGL_ANDROID_get_render_buffer
I/SurfaceFlinger( 254): Client API: OpenGL ES
I/SurfaceFlinger( 254): EGLSurface: 8-8-8-8, config=0x3
I/SurfaceFlinger( 254): OpenGL informations:
I/SurfaceFlinger( 254): vendor : Qualcomm
I/SurfaceFlinger( 254): renderer : Adreno (TM) 200
I/SurfaceFlinger( 254): version : OpenGL ES-CM 1.1
I/SurfaceFlinger( 254): extensions: GL_AMD_compressed_ATC_texture GL_AMD_performance_monitor GL_APPLE_texture_2D_limited_npot GL_EXT_texture_filter_anisotropic GL_EXT_texture_format_BGRA8888 GL_EXT_texture_type_2_10_10_10_REV GL_OES_blend_equation_separate GL_OES_blend_func_separate GL_OES_blend_subtract GL_OES_compressed_ETC1_RGB8_texture GL_OES_compressed_paletted_texture GL_OES_depth_texture GL_OES_draw_texture GL_OES_EGL_image GL_OES_EGL_image_external GL_OES_framebuffer_object GL_OES_matrix_palette GL_OES_packed_depth_stencil GL_OES_point_size_array GL_OES_point_sprite GL_OES_read_format GL_OES_rgb8_rgba8 GL_OES_stencil_wrap GL_OES_texture_cube_map GL_OES_texture_env_crossbar GL_OES_texture_float GL_OES_texture_half_float GL_OES_texture_half_float_linear GL_OES_texture_npot GL_OES_texture_mirrored_repeat GL_QCOM_binning_control GL_QCOM_extended_get GL_QCOM_tiled_rendering GL_AMD_compressed_3DC_texture
I/SurfaceFlinger( 254): GL_MAX_TEXTURE_SIZE = 4096
I/SurfaceFlinger( 254): GL_MAX_VIEWPORT_DIMS = 4096
I/SurfaceFlinger( 254): flags = 00000000
D/SensorService( 254): nuSensorService starting...
E/bdaddr ( 271): Error reading /data/.nvmac_bt.info (unexpected size 18)
E/SensorHAL( 254): __poll_init
E/SensorHAL( 254): +__poll_activate: handle=0 enabled=0
E/SensorHAL( 254): +__poll_activate: handle=1 enabled=0
E/SensorHAL( 254): +__poll_activate: handle=2 enabled=0
E/SensorHAL( 254): +__poll_activate: handle=3 enabled=0
I/SensorService( 254): BMA220
I/SensorService( 254): MMC314X
I/SensorService( 254): Mag & Acc Combo Orientation Sensor
I/SensorService( 254): TAOS
I/sysproc ( 254): System server: starting Android runtime.
I/sysproc ( 254): System server: starting Android services.
I/SystemServer( 254): Entered the Android system server!
D/SensorService( 254): nuSensorService thread starting...
I/sysproc ( 254): System server: entering thread pool.
I/SystemServer( 254): Entropy Service
I/SystemServer( 254): Power Manager
I/SystemServer( 254): Activity Manager
I/ActivityManager( 254): Memory class: 32
D/libEGL ( 270): loaded /system/lib/egl/libGLES_android.so
D/libEGL ( 270): loaded /system/lib/egl/libEGL_adreno200.so
W/UsageStats( 254): Usage stats version changed; dropping
D/libEGL ( 270): loaded /system/lib/egl/libGLESv1_CM_adreno200.so
D/libEGL ( 270): loaded /system/lib/egl/libGLESv2_adreno200.so
E/SurfaceFlinger( 254): eglSwapBuffers: EGL error 0x3008 (EGL_BAD_DISPLAY)
W/zipro ( 270): Unable to open zip '/data/local/bootanimation.zip': No such file or directory
HELP ME PLEASE!
PS. Full logcat http://pastebin.com/wxcMd6Nz
Thanx in Advance!
Logcat shows lot of Sony Ericsson specific libraries and files are missing and because of the dependency, it's throwing error and restarting framework again and again. Why are you trying to use something Sony Ericsson on a Samsung phone?
ivoidwarranty said:
Logcat shows lot of Sony Ericsson specific libraries and files are missing and because of the dependency, it's throwing error and restarting framework again and again. Why are you trying to use something Sony Ericsson on a Samsung phone?
Click to expand...
Click to collapse
Here it is running on Galaxy Y:
http://forum.xda-developers.com/showthread.php?t=1979146
and
Here is original thread (It is CM7, modded to run SE files)
http://forum.xda-developers.com/showthread.php?t=1504633
Somehow last night my phone (Galaxy S4 running AOSP 4.4.2) crashed and now it wont reboot. It just sticks on the screen with the four colours animation for ever. I tried deleting the Cache, and Davilik Cache but it has not fixed the problem .. after this is went through the Upgrading Android process for all the apps but then stuck on "Starting Apps" .. so pretty clearly some application is starting and has a problem and so my phone wont boot .. but is there anyway of finding out which application it is?? Im aware I can wipe data and start again but would like to solve the problem without this if its possible. I also tried re-flashing my ROM but it didnt help.
Thanks for any help in advance.
If it helps anybody help me, I plugged my phone into usb while it is stuck in the bootloop and ran
adb logcat *:E .. here is the result
--------- beginning of /dev/log/system
--------- beginning of /dev/log/main
E/DataRouter( 198): USB Interface is open with 0x9
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 1 of 10
E/macloader( 210): CID info file will be created!!!
E/wcnss_service( 221): CAL file not found
E/wcnss_service( 221): Failed to open wcnss device : No such file or directory
E/mm-camera( 211): qcamsvr_start: old_mode = 3f
E/INSTHK ( 249): Checked...
E/PPDaemon( 217): Failed to open the config file!
E/PPDaemon( 217): Panel type: 8
E/rmt_storage( 223): Remote storage service is not supported on mdm target
E/AT_Distributor( 212): Failed to init ATD
E/mm-camera( 211): qcamsvr_load_gesture_lib Error opening gesture library
E/mm-camera( 211): Cannot init Gesture library
E/mm-camera( 211): camera_plugin_create_func: handle = 0xb6c10008, client_open_fn = 0xb6c0d565, destroy_fn = 0xb6c0db99
E/QC-time-services( 220): Daemon:genoff_boot_tod_init: Unable to set TOD at boot up
E/QC-time-services( 220): Daemon: Unable to set TOD at boot up
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/Diag_Lib( 195): Diag_LSM_Init: Failed to open handle to diag driver, error = 13
E/QCNEA ( 214): CnE Standard Version 4.01
E/QCNEA ( 214): CnE Pro Version 1.01
E/QCNEA ( 214): Cne WQE Version 0.1
E/QCNEA ( 214): Cne NSRM Version 1.01
E/Sensorhubs( 207): couldn't find 'ssp_context' input device
E/Sensorhubs( 207): SSPContext: open sensorhub device failed(-1)
E/PRDrmPlugIn( 202): PRDrmPlugin:RDrmPlugin
E/PRDrmPlugInImp( 202): PRDRMPluginAPI::create
E/PRDrmPlugInImp( 202): PRDRMPluginAPI::SetEventHandler
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 2 of 10
E/PRDrmPlugIn( 202): PRDrmPlugin:nGetSupportInfo, uniqueId = 0
E/Sensorhubs( 207): couldn't find 'gesture_sensor' input device
E/MediaPlayerFactory( 203): calling dlopen on FACTORY_LIB
E/MediaPlayerFactory( 203): calling dlsym on pFactoryLib for FACTORY_CREATE_FN
E/MediaPlayerFactory( 203): registering DASH Player factory...
E/QualcommCamera( 203): Qint android::get_number_of_cameras(): E
E/alsa_mixer( 203): Control open failed
E/ ( 203): [ACDB RTC]->rtc init done!->result [0]
E/Diag_Lib( 203): actp_diag_init: call diag init function with B50181DD
E/ ( 203): [ACDB ACPH]->actp diag init done!
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 74
E/ACDB-LOADER( 203): done with conversion, anc config size is 74
E/AndroidRuntime( 201): cannot open customer xml file
E/AndroidRuntime( 201): /system/csc/customer.xml can't open file
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 3 of 10
E/ICD ( 194): There is no file or permission.
E/BootAnimation( 613): Could not open '/sys/devices/w1_bus_master1/w1_master_check_id'
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 4 of 10
E/EmojiFactory_jni( 201): Failed to load libemoji.so: dlopen failed: library "libemoji.so" not found
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 5 of 10
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 6 of 10
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 7 of 10
E/Sensors ( 768): getName gyro_sensor name file open error.
E/GyroSensor( 768): GyroSensor : getName of gyro_sensor failed.
E/TemperatureHumiditySensor( 768): Failed to open send_accuracy sysfs
E/Sensors ( 768): sensors__get_sensors_list gyro_sensor name file open error.
E/MagneticSensor( 768): enable, 122, data_fd = -1
E/GyroSensor( 768): enable, 148, data_fd = -1
E/TemperatureHumiditySensor( 768): enable, 216, data_fd = -1
E/TemperatureHumiditySensor( 768): enable, 216, data_fd = -1
E/Sensors ( 768): sensors__get_sensors_list gyro_sensor name file open error.
E/Sensors ( 768): sensors__get_sensors_list gyro_sensor name file open error.
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 8 of 10
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 9 of 10
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 10 of 10
E/kickstart-qcks( 226): '/dev/mdm' was not found
E/kickstart-qcks( 226): ERROR: Can't bring MDM9K out of reset
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_mixer( 203): Control open failed
E/ ( 203): csd_client_service_init: Invalid rx device 0, setting to handset
E/ ( 203): csd_client_service_init: Invalid tx device 0, setting to handset
E/alsa_ucm( 203): Invalid current verb value: Inactive - -1
E/alsa_ucm( 203): No valid device Speaker found
E/alsa_ucm( 203): Control device not initialized
E/alsa_ucm( 203): Control device not initialized
E/alsa_pcm( 203): cannot open device '/dev/snd/pcmC0D0p', errno 2
E/ALSADevice( 203): open: Failed to initialize ALSA device 'hw:0,0'
E/AudioHardwareALSA( 203): Device open failed
E/QMI_FW ( 203): xport_open: socket creation failed - 1
E/AudioPolicyManagerBase( 203): Not output found for attached devices 00000003
E/AudioPolicyManagerBase( 203): Failed to open primary output
E/AudioPolicyManagerBase( 203): getDeviceForStrategy() speaker device not found for STRATEGY_SONIFICATION
E/AudioPolicyManagerBase( 203): getDeviceForStrategy() speaker device not found for STRATEGY_SONIFICATION
E/Audio_Control_CSC( 203): /system/csc/sales_code.dat ==> cannot open file
E/AudioPolicyService( 203): couldn't init_check the audio policy (No such device)
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init:retry count exceeds limitQMI init failed continuing withoutserver
E/QC-time-services( 220): Daemon: QMI init failed, QMI calls inactive
E/QC-time-services( 220): Daemon: Time-services: Waiting to acceptconnection
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=0
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=18
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=37
E/QMI_FW ( 203): open_lookup_sock_fd: Lookup sock fd creation failed
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=0
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=18
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=37
E/SensorHubManager( 768): JNI: sensorhubs_get_next_module: getSensorHubList: count= 2
E/SensorHubManager( 768): JNI: sensorhubs_get_next_module: getSensorHubList: count= 2
E/SensorHubManager( 768): JNI: sensorhubs_enabledisable: delay= 0
E/EventHub( 768): could not get driver version for /dev/input/mice, Not a typewriter
E/ConnectivityService( 768): Error in networkAttributes - ignoring attempt to define type 17
E/ConnectivityService( 768): Ignoring protectedNetwork 14
E/MobileDataStateTracker( 768): default: Ignoring feature request because could not acquire PhoneService
E/MobileDataStateTracker( 768): default: Could not enable APN type "default"
F/SystemServer( 768): BOOT FAILURE Creating Connectivity Engine Service
F/SystemServer( 768): java.lang.ClassNotFoundException: Didn't find class "com.quicinc.cne.CNE" on path: DexPathList[[],nativeLibraryDirectories=[/vendor/lib, /system/lib]]
F/SystemServer( 768): at dalvik.system.BaseDexClassLoader.findClass(BaseDexClassLoader.java:56)
F/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:497)
F/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:457)
F/SystemServer( 768): at com.android.server.ServerThread.initAndLoop(SystemServer.java:572)
F/SystemServer( 768): at com.android.server.SystemServer.main(SystemServer.java:1263)
F/SystemServer( 768): at java.lang.reflect.Method.invokeNative(Native Method)
F/SystemServer( 768): at java.lang.reflect.Method.invoke(Method.java:515)
F/SystemServer( 768): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:1264)
F/SystemServer( 768): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:1080)
F/SystemServer( 768): at dalvik.system.NativeStart.main(Native Method)
E/SystemServer( 768): Failed to load CNE class
E/SystemServer( 768): java.lang.ClassNotFoundException: Didn't find class "com.quicinc.cne.CNE" on path: DexPathList[[],nativeLibraryDirectories=[/vendor/lib, /system/lib]]
E/SystemServer( 768): at dalvik.system.BaseDexClassLoader.findClass(BaseDexClassLoader.java:56)
E/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:497)
E/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:457)
E/SystemServer( 768): at com.android.server.ServerThread.initAndLoop(SystemServer.java:572)
E/SystemServer( 768): at com.android.server.SystemServer.main(SystemServer.java:1263)
E/SystemServer( 768): at java.lang.reflect.Method.invokeNative(Native Method)
E/SystemServer( 768): at java.lang.reflect.Method.invoke(Method.java:515)
E/SystemServer( 768): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:1264)
E/SystemServer( 768): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:1080)
E/SystemServer( 768): at dalvik.system.NativeStart.main(Native Method)
E/wpa_supplicant( 1981): wpa_driver_nl80211_driver_cmd: failed to issue private commands
E/WifiStateMachine( 768): Unexpected BatchedScanResults :null
E/wpa_supplicant( 1981): wpa_driver_nl80211_driver_cmd: failed to issue private commands
E/ActivityManager( 768): Attempt to launch receivers of broadcast intent Intent { act=android.net.ConnectivityService.action.PKT_CNT_SAMPLE_INTERVAL_ELAPSED flg=0x4 (has extras) } before boot completion
Hello
I'm porting cm10 to lg L32
and i'm stuck on constant bootanimation
you can find attached 10second of logcat as txt
you can find attached 60second of logcat as zip
you can find attached adb bugreport as zip
at the bottom
generally the problem is :
Code:
E/mediaserver(23948): Error Loading libmpqstobinder
E/mediaserver(23948): Error: Cannot load library: load_library[1093]: Library 'libmpqstobinder.so' not found
E/GestureDeviceService(23948): Could not load gesture HAL module
E/dalvikvm(24068): ERROR: couldn't find native method
E/dalvikvm(24068): Requested: Llibcore/io/Posix;.socketpair:(IIILjava/io/FileDescriptor;Ljava/io/FileDescriptor;)V
E/JNIHelp (24068): RegisterNatives failed for 'libcore/io/Posix', aborting
F/libc (24068): Fatal signal 11 (SIGSEGV) at 0xdeadbaad (code=1), thread 24068 (zygote)
I/DEBUG ( 146): *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
I/DEBUG ( 146): Build fingerprint: 'lge/vee3e_open_esa/vee3e:4.1.2/JZO54K/E42510g-ESA-XX.1390632685:user/release-keys'
I/DEBUG ( 146): pid: 24068, tid: 24068, name: zygote >>> zygote <<<
I/DEBUG ( 146): signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr deadbaad
I/DEBUG ( 146): r0 00000027 r1 deadbaad r2 00000000 r3 00000000
I/DEBUG ( 146): r4 00000000 r5 bead537c r6 411c3155 r7 00000056
I/DEBUG ( 146): r8 4085be88 r9 408334ad sl 00000007 fp 400f1db4
I/DEBUG ( 146): ip 4074afe0 sp bead5378 lr 40113259 pc 40113282 cpsr 60000030
I/DEBUG ( 146): d0 74726f6261202c27 d1 6c69616620736576
I/DEBUG ( 146): d2 726f747069726367 d3 692f6176616a4c69
I/DEBUG ( 146): d4 000000004d8336f6 d5 000000044134aed8
I/DEBUG ( 146): d6 000100020003001e d7 40019b984d773ad8
I/DEBUG ( 146): d8 0000000000000000 d9 0000000000000000
I/DEBUG ( 146): d10 0000000000000000 d11 0000000000000000
I/DEBUG ( 146): d12 0000000000000000 d13 0000000000000000
I/DEBUG ( 146): d14 0000000000000000 d15 0000000000000000
I/DEBUG ( 146): d16 4d749c4100000931 d17 000000004d5f2760
I/DEBUG ( 146): d18 0000000000000000 d19 000000004d833700
I/DEBUG ( 146): d20 000000044134aed8 d21 000100000002001f
I/DEBUG ( 146): d22 40019b984d775d74 d23 4d74b2b100000f35
I/DEBUG ( 146): d24 0000000000000000 d25 0000000000000000
I/DEBUG ( 146): d26 0000000000000000 d27 0000000000000000
I/DEBUG ( 146): d28 0000000000000000 d29 0000000000000000
I/DEBUG ( 146): d30 0000000000000000 d31 0000000000000000
I/DEBUG ( 146): scr 00000010
I/DEBUG ( 146):
I/DEBUG ( 146): backtrace:
I/DEBUG ( 146): #00 pc 00018282 /system/lib/libc.so
I/DEBUG ( 146): #01 pc 0000dc04 /system/lib/libc.so (abort+4)
I/DEBUG ( 146): #02 pc 00000955 /system/lib/libnativehelper.so (jniRegisterNativeMethods+72)
I/DEBUG ( 146): #03 pc 0000d5a3 /system/lib/libjavacore.so (JNI_OnLoad+246)
I/DEBUG ( 146): #04 pc 0005016d /system/lib/libdvm.so (dvmLoadNativeCode(char const*, Object*, char**)+284)
I/DEBUG ( 146): #05 pc 00046f73 /system/lib/libdvm.so
I/DEBUG ( 146): #06 pc 000487b1 /system/lib/libdvm.so (dvmStartup(int, char const* const*, bool, _JNIEnv*)+5796)
I/DEBUG ( 146): #07 pc 0004e6e9 /system/lib/libdvm.so (JNI_CreateJavaVM+544)
I/DEBUG ( 146): #08 pc 00049ddd /system/lib/libandroid_runtime.so (android::AndroidRuntime::startVm(_JavaVM**, _JNIEnv**)+1188)
I/DEBUG ( 146): #09 pc 0004a1bf /system/lib/libandroid_runtime.so (android::AndroidRuntime::start(char const*, char const*)+154)
I/DEBUG ( 146): #10 pc 00000e0b /system/bin/app_process
I/DEBUG ( 146):
I/DEBUG ( 146): stack:
I/DEBUG ( 146): bead5338 400f1e70
I/DEBUG ( 146): bead533c 4134fc60 /dev/ashmem/dalvik-heap (deleted)
I/DEBUG ( 146): bead5340 4c55df48 /dev/ashmem/dalvik-LinearAlloc (deleted)
I/DEBUG ( 146): bead5344 4c55cd50 /dev/ashmem/dalvik-LinearAlloc (deleted)
I/DEBUG ( 146): bead5348 4c55cc38 /dev/ashmem/dalvik-LinearAlloc (deleted)
I/DEBUG ( 146): bead534c 00000007
I/DEBUG ( 146): bead5350 4134fc60 /dev/ashmem/dalvik-heap (deleted)
I/DEBUG ( 146): bead5354 40856465 /system/lib/libjavacore.so
I/DEBUG ( 146): bead5358 bead537c [stack]
I/DEBUG ( 146): bead535c 40856465 /system/lib/libjavacore.so
I/DEBUG ( 146): bead5360 40857138 /system/lib/libjavacore.so
I/DEBUG ( 146): bead5364 411beee1 /system/lib/libdvm.so
I/DEBUG ( 146): bead5368 ffffffff
I/DEBUG ( 146): bead536c 411c324f /system/lib/libdvm.so
I/DEBUG ( 146): bead5370 df0027ad
I/DEBUG ( 146): bead5374 00000000
I/DEBUG ( 146): #00 bead5378 bead5394 [stack]
I/DEBUG ( 146): bead537c fffffbdf
I/DEBUG ( 146): bead5380 4134fc60 /dev/ashmem/dalvik-heap (deleted)
I/DEBUG ( 146): bead5384 40296d80
I/DEBUG ( 146): bead5388 408566b6 /system/lib/libjavacore.so
I/DEBUG ( 146): bead538c 40cfd6a3 /system/lib/libcrypto.so
I/DEBUG ( 146): bead5390 40296d80
I/DEBUG ( 146): bead5394 40296d80
I/DEBUG ( 146): bead5398 408566b6 /system/lib/libjavacore.so
I/DEBUG ( 146): bead539c 40108c08 /system/lib/libc.so (__pthread_clone)
I/DEBUG ( 146): #01 bead53a0 40cfd6a3 /system/lib/libcrypto.so
I/DEBUG ( 146): bead53a4 40748959 /system/lib/libnativehelper.so (jniRegisterNativeMethods+76)
I/DEBUG ( 146): #02 bead53a8 40296d80
I/DEBUG ( 146): bead53ac 21b00001
I/DEBUG ( 146): bead53b0 40296d80
I/DEBUG ( 146): bead53b4 00000000
I/DEBUG ( 146): bead53b8 00000000
I/DEBUG ( 146): bead53bc bead5424 [stack]
I/DEBUG ( 146): bead53c0 00000000
I/DEBUG ( 146): bead53c4 408335a7 /system/lib/libjavacore.so (JNI_OnLoad+250)
I/DEBUG ( 146):
I/DEBUG ( 146): memory near r5:
I/DEBUG ( 146): bead535c 40856465 40857138 411beee1 ffffffff [email protected]@...A....
I/DEBUG ( 146): bead536c 411c324f df0027ad 00000000 bead5394 O2.A.'.......S..
I/DEBUG ( 146): bead537c fffffbdf 4134fc60 40296d80 408566b6 ....`.4A.m)@[email protected]
I/DEBUG ( 146): bead538c 40cfd6a3 40296d80 40296d80 408566b6 [email protected])@.m)@[email protected]
I/DEBUG ( 146): bead539c 40108c08 40cfd6a3 40748959 40296d80 [email protected]@[email protected])@
I/DEBUG ( 146):
I/DEBUG ( 146): memory near r6:
I/DEBUG ( 146): 411c3134 43f8e8bd be83f019 00058b8e fffffe34 ...C........4...
I/DEBUG ( 146): 411c3144 fffffe30 00056bee fffffe6c fffffd0f 0....k..l.......
I/DEBUG ( 146): 411c3154 4ff0e92d b0854605 a803460c 46174629 -..O.F...F..)F.F
I/DEBUG ( 146): 411c3164 f7fb469b 4621fe91 f04f9803 f7fc0800 .F....!F..O.....
I/DEBUG ( 146): 411c3174 4604fe43 e897e063 f1ba0460 d05b0f00 C..Fc...`.....[.
I/DEBUG ( 146):
HERE I REMOVED A LITTLE SO IT FITS IN MESSAGE ;)
I/DEBUG ( 146):
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_FORMAT_QCELP
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_FORMAT_EVRC
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_FORMAT_EVRCB
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_FORMAT_EVRCWB
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_OUT_EARPIECE
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_OUT_SPEAKER
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_OUT_WIRED_HEADSET
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_OUT_WIRED_HEADPHONE
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_OUT_ALL_SCO
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_OUTPUT_FLAG_DIRECT
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_OUTPUT_FLAG_VOIP_RX
V/AudioPolicyManagerBase(24072): loadOutput() adding output mSupportedDevices 007f, mFlags 4001
V/AudioPolicyManagerBase(24072): loadHwModule() loading output lpa
V/AudioPolicyManagerBase(24072): loadSamplingRates() adding rate 8000
V/AudioPolicyManagerBase(24072): loadSamplingRates() adding rate 11025
V/AudioPolicyManagerBase(24072): loadSamplingRates() adding rate 12000
V/AudioPolicyManagerBase(24072): loadSamplingRates() adding rate 16000
V/AudioPolicyManagerBase(24072): loadSamplingRates() adding rate 22050
V/AudioPolicyManagerBase(24072): loadSamplingRates() adding rate 24000
V/AudioPolicyManagerBase(24072): loadSamplingRates() adding rate 32000
V/AudioPolicyManagerBase(24072): loadSamplingRates() adding rate 44100
V/AudioPolicyManagerBase(24072): loadSamplingRates() adding rate 48000
V/AudioPolicyManagerBase(24072): loadOutChannels() AUDIO_CHANNEL_OUT_STEREO
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_CHANNEL_OUT_STEREO
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_CHANNEL_OUT_MONO
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_FORMAT_PCM_16_BIT
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_OUT_SPEAKER
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_OUT_EARPIECE
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_OUT_WIRED_HEADSET
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_OUT_WIRED_HEADPHONE
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_OUT_ALL_SCO
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_OUT_AUX_DIGITAL
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_OUTPUT_FLAG_DIRECT
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_OUTPUT_FLAG_LPA
V/AudioPolicyManagerBase(24072): loadOutput() adding output mSupportedDevices 047f, mFlags 1001
V/AudioPolicyManagerBase(24072): loadHwModule() loading input primary
V/AudioPolicyManagerBase(24072): loadSamplingRates() adding rate 8000
V/AudioPolicyManagerBase(24072): loadSamplingRates() adding rate 11025
V/AudioPolicyManagerBase(24072): loadSamplingRates() adding rate 12000
V/AudioPolicyManagerBase(24072): loadSamplingRates() adding rate 16000
V/AudioPolicyManagerBase(24072): loadSamplingRates() adding rate 22050
V/AudioPolicyManagerBase(24072): loadSamplingRates() adding rate 24000
V/AudioPolicyManagerBase(24072): loadSamplingRates() adding rate 32000
V/AudioPolicyManagerBase(24072): loadSamplingRates() adding rate 44100
V/AudioPolicyManagerBase(24072): loadSamplingRates() adding rate 48000
V/AudioPolicyManagerBase(24072): loadInChannels() AUDIO_CHANNEL_IN_MONO
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_CHANNEL_IN_MONO
V/AudioPolicyManagerBase(24072): loadInChannels() adding channelMask 0010
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_CHANNEL_IN_STEREO
V/AudioPolicyManagerBase(24072): loadInChannels() adding channelMask 000c
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_CHANNEL_IN_VOICE_CALL_MONO
V/AudioPolicyManagerBase(24072): loadInChannels() adding channelMask c010
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_CHANNEL_IN_VOICE_DNLINK_MONO
V/AudioPolicyManagerBase(24072): loadInChannels() adding channelMask 8010
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_CHANNEL_IN_VOICE_UPLINK_MONO
V/AudioPolicyManagerBase(24072): loadInChannels() adding channelMask 4010
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_FORMAT_PCM_16_BIT
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_FORMAT_AMR_NB
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_FORMAT_EVRC
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_FORMAT_QCELP
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_IN_BUILTIN_MIC
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_IN_WIRED_HEADSET
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_IN_WIRED_HEADSET_VR
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_IN_BUILTIN_MIC_VR
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET_VR
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_IN_VOICE_CALL
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_IN_HEADPHONE_VR
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_IN_BACK_MIC
V/AudioPolicyManagerBase(24072): loadInput() adding input mSupportedDevices 5fe00000
V/AudioPolicyManagerBase(24072): loadHwModule() loading input voipin
V/AudioPolicyManagerBase(24072): loadSamplingRates() adding rate 8000
V/AudioPolicyManagerBase(24072): loadSamplingRates() adding rate 16000
V/AudioPolicyManagerBase(24072): loadInChannels() AUDIO_CHANNEL_IN_MONO
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_CHANNEL_IN_MONO
V/AudioPolicyManagerBase(24072): loadInChannels() adding channelMask 0010
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_FORMAT_PCM_16_BIT
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_FORMAT_AMR_NB
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_FORMAT_AMR_WB
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_FORMAT_QCELP
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_FORMAT_EVRC
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_FORMAT_EVRCB
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_FORMAT_EVRCWB
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_IN_COMMUNICATION
V/AudioPolicyManagerBase(24072): loadInput() adding input mSupportedDevices 100000
V/AudioPolicyManagerBase(24072): loadHwModules() loading module a2dp
V/AudioPolicyManagerBase(24072): loadHwModule() loading output primary
V/AudioPolicyManagerBase(24072): loadSamplingRates() adding rate 48000
V/AudioPolicyManagerBase(24072): loadOutChannels() AUDIO_CHANNEL_OUT_STEREO
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_CHANNEL_OUT_STEREO
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_FORMAT_PCM_16_BIT
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_OUT_ALL_A2DP
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_OUTPUT_FLAG_PRIMARY
V/AudioPolicyManagerBase(24072): loadOutput() adding output mSupportedDevices 0380, mFlags 0002
V/AudioPolicyManagerBase(24072): loadHwModules() loading module usb
V/AudioPolicyManagerBase(24072): loadHwModule() loading output usb_accessory
V/AudioPolicyManagerBase(24072): loadSamplingRates() adding rate 44100
V/AudioPolicyManagerBase(24072): loadOutChannels() AUDIO_CHANNEL_OUT_STEREO
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_CHANNEL_OUT_STEREO
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_FORMAT_PCM_16_BIT
V/AudioPolicyManagerBase(24072): stringToEnum() found AUDIO_DEVICE_OUT_USB_ACCESSORY
V/AudioPolicyManagerBase(24072): loadOutput() adding output mSupportedDevices 2000, mFlags 0000
I/AudioPolicyManagerBase(24072): loadAudioPolicyConfig() loaded /system/etc/audio_policy.conf
V/AudioHardwareMSM76XXA(24072): constructed (0 SND endpoints)
V/AudioHardwareMSM76XXA(24072): cnt = 0 ept->name = NONE ept->id = 0
V/AudioHardwareMSM76XXA(24072): cnt = 1 ept->name = HANDSET_SPKR ept->id = 1
V/AudioHardwareMSM76XXA(24072): cnt = 2 ept->name = HANDSET_MIC ept->id = 2
V/AudioHardwareMSM76XXA(24072): cnt = 3 ept->name = HEADSET_MIC ept->id = 3
V/AudioHardwareMSM76XXA(24072): cnt = 4 ept->name = HEADSET_SPKR_MONO ept->id = 4
V/AudioHardwareMSM76XXA(24072): cnt = 5 ept->name = HEADSET_SPKR_STEREO ept->id = 5
V/AudioHardwareMSM76XXA(24072): cnt = 6 ept->name = SPEAKER_PHONE_MIC ept->id = 6
V/AudioHardwareMSM76XXA(24072): cnt = 7 ept->name = SPEAKER_PHONE_MONO ept->id = 7
V/AudioHardwareMSM76XXA(24072): cnt = 8 ept->name = BT_SCO_MIC_NREC ept->id = 8
V/AudioHardwareMSM76XXA(24072): cnt = 9 ept->name = BT_SCO_MIC ept->id = 9
V/AudioHardwareMSM76XXA(24072): cnt = 10 ept->name = BT_SCO_SPKR ept->id = 10
V/AudioHardwareMSM76XXA(24072): cnt = 11 ept->name = BT_A2DP_SPKR ept->id = 11
V/AudioHardwareMSM76XXA(24072): cnt = 12 ept->name = TTY_HEADSET_MIC ept->id = 12
V/AudioHardwareMSM76XXA(24072): cnt = 13 ept->name = TTY_HEADSET_SPKR ept->id = 13
V/AudioHardwareMSM76XXA(24072): cnt = 14 ept->name = LB_HANDSET_MIC ept->id = 14
V/AudioHardwareMSM76XXA(24072): cnt = 15 ept->name = LB_HANDSET_SPKR ept->id = 15
V/AudioHardwareMSM76XXA(24072): cnt = 16 ept->name = LB_HEADSET_MIC ept->id = 16
V/AudioHardwareMSM76XXA(24072): cnt = 17 ept->name = LB_HEADSET_SPKR ept->id = 17
V/AudioHardwareMSM76XXA(24072): cnt = 18 ept->name = LB_SPKRPHONE_MIC ept->id = 20
V/AudioHardwareMSM76XXA(24072): cnt = 19 ept->name = LB_SPKRPHONE_SPKR ept->id = 21
V/AudioHardwareMSM76XXA(24072): cnt = 20 ept->name = HEADSET_STEREO_PLUS_SPKR_MONO_RX ept->id = 19
V/AudioHardwareMSM76XXA(24072): cnt = 21 ept->name = SPEAKER_PHONE_SPKR_MEDIA ept->id = 22
V/AudioHardwareMSM76XXA(24072): cnt = 22 ept->name = SPEAKER_PHONE_MIC_MEDIA ept->id = 23
V/AudioHardwareMSM76XXA(24072): cnt = 23 ept->name = LP_FM_HEADSET_SPKR_STEREO_RX ept->id = 25
V/AudioHardwareMSM76XXA(24072): cnt = 24 ept->name = I2S_RX ept->id = 32
V/AudioHardwareMSM76XXA(24072): cnt = 25 ept->name = HANDSET_VR_MIC ept->id = 27
V/AudioHardwareMSM76XXA(24072): cnt = 26 ept->name = HEADSET_VR_MIC ept->id = 29
V/AudioHardwareMSM76XXA(24072): cnt = 27 ept->name = BT_VR_MIC ept->id = 55
V/AudioHardwareMSM76XXA(24072): cnt = 28 ept->name = SPEAKER_PHONE_MIC_ENDFIRE ept->id = 45
V/AudioHardwareMSM76XXA(24072): cnt = 29 ept->name = HANDSET_MIC_ENDFIRE ept->id = 46
V/AudioHardwareMSM76XXA(24072): cnt = 30 ept->name = I2S_TX ept->id = 48
V/AudioHardwareMSM76XXA(24072): cnt = 31 ept->name = HEADSET_STEREO_LB_PLUS_HEADSET_SPKR_STEREO_RX ept->id = 51
V/AudioHardwareMSM76XXA(24072): cnt = 32 ept->name = SPEAKER_MONO_LB_PLUS_SPEAKER_MONO_RX ept->id = 54
V/AudioHardwareMSM76XXA(24072): cnt = 33 ept->name = LP_FM_HEADSET_SPKR_STEREO_PLUS_HEADSET_SPKR_STEREO_RX ept->id = 57
V/AudioHardwareMSM76XXA(24072): cnt = 34 ept->name = FM_DIGITAL_HEADSET_SPKR_STEREO ept->id = 65
V/AudioHardwareMSM76XXA(24072): cnt = 35 ept->name = FM_DIGITAL_SPEAKER_PHONE_MONO ept->id = 67
V/AudioHardwareMSM76XXA(24072): cnt = 36 ept->name = FM_DIGITAL_SPEAKER_PHONE_MIC ept->id = 68
V/AudioHardwareMSM76XXA(24072): cnt = 37 ept->name = FM_DIGITAL_BT_A2DP_SPKR ept->id = 69
V/AudioHardwareMSM76XXA(24072): cnt = 38 ept->name = MAX ept->id = 80
E/ (24072): libaudcal: acph_init() - Allocated memory for acph_main_buffer!!
V/AudioHardwareMSM76XXA(24072): Fluence feature Disabled
D/AudioHardwareMSM76XXA(24072): openOutputStream: devices = 2 format = 1 channels = 3 sampleRate = 44100 flags 2
D/AudioHardwareMSM76XXA(24072): SampleRate 48k
D/AudioHardwareMSM76XXA(24072): SampleRate 48k
E/AudioHardwareMSM76XXA(24072): AudioStreamOutMSM72xx: Setting up correct values
D/AudioHardwareMSM76XXA(24072): SampleRate 48k
V/AudioHardwareMSM76XXA(24072): AudioStreamOutMSM72xx::getParameters() voip_flag=
D/AudioHardwareMSM76XXA(24072): Bufsize 5248
D/AudioHardwareMSM76XXA(24072): Bufsize 5248
D/AudioHardwareMSM76XXA(24072): SampleRate 48k
D/AudioHardwareMSM76XXA(24072): Bufsize 5248
D/AudioHardwareMSM76XXA(24072): SampleRate 48k
D/AudioHardwareMSM76XXA(24072): Bufsize 5248
D/AudioHardwareMSM76XXA(24072): SampleRate 48k
V/AudioSystem(24072): ioConfigChanged() event 0
V/AudioSystem(24072): ioConfigChanged() new output samplingRate 48000, format 1 channels 3 frameCount 1312 latency 54
W/SRS_Proc(24072): SRS: QDSP hook registered.
W/SRS_Proc(24072): SRS: QDSP hook registered.
I/AudioHardwareMSM76XXA(24072): Set master volume to 7.
D/AudioHardwareMSM76XXA(24072): rpc_snd_set_volume(1, 2, 0, 7)
W/SRS_ProcWS(24072): SRS_Processing - SourceOutAdd - No Available Slot for 0x41f9b008
D/AudioHardwareMSM76XXA(24072): rpc_snd_set_volume(7, 6, 0, 7)
W/AudioFlinger(24072): Thread AudioOut_2 cannot connect to the power manager service
D/AudioHardwareMSM76XXA(24072): rpc_snd_set_volume(10, 9, 0, 7)
D/AudioHardwareMSM76XXA(24072): rpc_snd_set_volume(5, 3, 0, 7)
D/AudioHardwareMSM76XXA(24072): rpc_snd_set_volume(1, 46, 0, 7)
D/AudioHardwareMSM76XXA(24072): rpc_snd_set_volume(7, 45, 0, 7)
D/AudioHardwareMSM76XXA(24072): rpc_snd_set_volume(13, 12, 0, 1)
D/AudioHardwareMSM76XXA(24072): rpc_snd_set_volume(13, 2, 0, 1)
V/AudioPolicyManagerBase(24072): setOutputDevice() output 2 device 0002 delayMs 0
V/AudioPolicyManagerBase(24072): setOutputDevice() prevDevice 0002
V/AudioPolicyManagerBase(24072): setStreamMute() unmuting non muted stream!
V/AudioPolicyManagerBase(24072): setStreamMute() unmuting non muted stream!
V/AudioPolicyManagerBase(24072): setStreamMute() unmuting non muted stream!
V/AudioPolicyManagerBase(24072): setStreamMute() unmuting non muted stream!
V/AudioPolicyManagerBase(24072): setStreamMute() unmuting non muted stream!
V/AudioPolicyManagerBase(24072): setStreamMute() unmuting non muted stream!
V/AudioPolicyManagerBase(24072): setStreamMute() unmuting non muted stream!
V/AudioPolicyManagerBase(24072): setStreamMute() unmuting non muted stream!
V/AudioPolicyManagerBase(24072): setStreamMute() unmuting non muted stream!
V/AudioPolicyManagerBase(24072): setOutputDevice() changing device
W/AudioFlinger(24072): Thread AudioOut_2 cannot connect to the power manager service
V/AudioHardwareMSM76XXA(24072): AudioStreamOutMSM72xx::setParameters() routing=2
V/AudioHardwareMSM76XXA(24072): set output routing 2
I/AudioHardwareMSM76XXA(24072): Routing audio to Speakerphone
E/AudioHardwareMSM76XXA(24072): [LGE] Final outputDevices 2 new:0 mCur:ffffffff
W/AudioHardwareMSM76XXA(24072): rpc_snd_set_device(0, 1, 1)
V/AudioHardwareMSM76XXA(24072): In SPEAKER
W/AudioHardwareMSM76XXA(24072): rpc_snd_set_device(22, 23, 1, 1)
D/AudioPolicyManagerBase(24072): applyStreamVolumes() for output 2 and device 2
D/AudioPolicyManagerBase(24072): getDeviceForVolume device : 2
D/AudioPolicyManagerBase(24072): getVolumeIndex device : 2, curIndex : 4
D/AudioPolicyManagerBase(24072): computeVolume stream = 0, index = 4, output = 2, device = 2
D/AudioPolicyManagerBase(24072): getDeviceForVolume device : 2
D/AudioPolicyManagerBase(24072): volIndexToAmpl result = volume = 0.167881
D/AudioPolicyManagerBase(24072): return volume = 0.167881
D/AudioHardwareMSM76XXA(24072): setVoiceVolume(0.571429)
E/AudioHardwareMSM76XXA(24072): Setting in-call volume to 3 (available range is 1 to 7)
D/AudioHardwareMSM76XXA(24072): rpc_snd_set_volume(22, 23, 0, 4)
D/AudioPolicyManagerBase(24072): getDeviceForVolume device : 2
D/AudioPolicyManagerBase(24072): getVolumeIndex device : 2, curIndex : 4
D/AudioPolicyManagerBase(24072): computeVolume stream = 1, index = 4, output = 2, device = 2
D/AudioPolicyManagerBase(24072): getDeviceForVolume device : 2
D/AudioPolicyManagerBase(24072): volIndexToAmpl result = volume = 0.208057
D/AudioPolicyManagerBase(24072): return volume = 0.208057
D/AudioPolicyManagerBase(24072): getDeviceForVolume device : 2
D/AudioPolicyManagerBase(24072): getVolumeIndex device : 2, curIndex : 4
D/AudioPolicyManagerBase(24072): computeVolume stream = 2, index = 4, output = 2, device = 2
D/AudioPolicyManagerBase(24072): getDeviceForVolume device : 2
D/AudioPolicyManagerBase(24072): volIndexToAmpl result = volume = 0.226465
D/AudioPolicyManagerBase(24072): return volume = 0.226465
D/AudioPolicyManagerBase(24072): getDeviceForVolume device : 2
D/AudioPolicyManagerBase(24072): getVolumeIndex device : 2, curIndex : 4
D/AudioPolicyManagerBase(24072): computeVolume stream = 3, index = 4, output = 2, device = 2
D/AudioPolicyManagerBase(24072): getDeviceForVolume device : 2
D/AudioPolicyManagerBase(24072): volIndexToAmpl result = volume = 0.231074
D/AudioPolicyManagerBase(24072): return volume = 0.231074
D/AudioPolicyManagerBase(24072): getDeviceForVolume device : 2
D/AudioPolicyManagerBase(24072): getVolumeIndex device : 2, curIndex : 4
D/AudioPolicyManagerBase(24072): computeVolume stream = 4, index = 4, output = 2, device = 2
D/AudioPolicyManagerBase(24072): getDeviceForVolume device : 2
D/AudioPolicyManagerBase(24072): volIndexToAmpl result = volume = 0.231074
D/AudioPolicyManagerBase(24072): return volume = 0.231074
D/AudioPolicyManagerBase(24072): getDeviceForVolume device : 2
D/AudioPolicyManagerBase(24072): getVolumeIndex device : 2, curIndex : 4
D/AudioPolicyManagerBase(24072): computeVolume stream = 5, index = 4, output = 2, device = 2
D/AudioPolicyManagerBase(24072): getDeviceForVolume device : 2
D/AudioPolicyManagerBase(24072): volIndexToAmpl result = volume = 0.226465
D/AudioPolicyManagerBase(24072): return volume = 0.226465
D/AudioPolicyManagerBase(24072): getDeviceForVolume device : 2
D/AudioPolicyManagerBase(24072): getVolumeIndex device : 2, curIndex : 4
V/AudioPolicyManagerBase(24072): checkAndSetVolume() cannot set stream 6 volume with force use = 0 for comm
D/AudioPolicyManagerBase(24072): getDeviceForVolume device : 2
D/AudioPolicyManagerBase(24072): getVolumeIndex device : 2, curIndex : 4
D/AudioPolicyManagerBase(24072): computeVolume stream = 7, index = 4, output = 2, device = 2
D/AudioPolicyManagerBase(24072): getDeviceForVolume device : 2
D/AudioPolicyManagerBase(24072): volIndexToAmpl result = volume = 0.208057
D/AudioPolicyManagerBase(24072): return volume = 0.208057
D/AudioPolicyManagerBase(24072): getDeviceForVolume device : 2
D/AudioPolicyManagerBase(24072): getVolumeIndex device : 2, curIndex : 4
D/AudioPolicyManagerBase(24072): computeVolume stream = 8, index = 4, output = 2, device = 2
D/AudioPolicyManagerBase(24072): getDeviceForVolume device : 2
D/AudioPolicyManagerBase(24072): volIndexToAmpl result = volume = 0.208057
D/AudioPolicyManagerBase(24072): return volume = 0.208057
D/AudioPolicyManagerBase(24072): getDeviceForVolume device : 2
D/AudioPolicyManagerBase(24072): getVolumeIndex device : 2, curIndex : 4
D/AudioPolicyManagerBase(24072): computeVolume stream = 9, index = 4, output = 2, device = 2
D/AudioPolicyManagerBase(24072): getDeviceForVolume device : 2
D/AudioPolicyManagerBase(24072): volIndexToAmpl result = volume = 0.231074
D/AudioPolicyManagerBase(24072): return volume = 0.231074
D/AudioPolicyManagerBase(24072): getDeviceForVolume device : 2
D/AudioPolicyManagerBase(24072): getVolumeIndex device : 2, curIndex : 4
D/AudioPolicyManagerBase(24072): computeVolume stream = 10, index = 4, output = 2, device = 2
D/AudioPolicyManagerBase(24072): getDeviceForVolume device : 2
D/AudioPolicyManagerBase(24072): volIndexToAmpl result = volume = 0.231074
D/AudioPolicyManagerBase(24072): return volume = 0.231074
V/AudioPolicyManagerBase(24072): setSystemProperty() property ro.camera.sound.forced, value 0
V/AudioPolicyManagerBase(24072): ENFORCED_AUDIBLE can be muted
E/BandwidthController(24073): runIptablesCmd(): failed /system/bin/iptables -t raw -N bw_raw_PREROUTING res=256
E/mediaserver(24072): Error Loading libmpqstobinder
E/mediaserver(24072): Error: Cannot load library: load_library[1093]: Library 'libmpqstobinder.so' not found
E/GestureDeviceService(24072): Could not load gesture HAL module
Error: Cannot load library: load_library[1093]: Library 'libmpqstobinder.so' not found ..
PLEASE NOTE : the file does not exsist in stock rom or base rom or the cm that i'm trying to port
Anybody ?
bump ?
IGGYVIP said:
bump ?
Click to expand...
Click to collapse
- It started to happen to me after i changed /system/build.prop permissions.
- The error comes from /system/bin/mediaserver https://github.com/gp-b2g/frameworks_base/blob/master/media/mediaserver/main_mediaserver.cpp
is related to tv things.
- /system/build.prop with size 0 or everything commented, or deleted does not work.
- proper /system/build.prop with permissions set to 777 or similar causes the error lib.
- proper /system/build.prop with permissions set to 000 does not cause the lib error and phone boots and the build.prop values are set fine.
- what causes it or why it does work or does not work with build.prop with changed permissions, i dont ****ing know.
weird.
Hello, here is my problem,
I have always ported the miui rom to my thl w200 device.
in the latest builds, after porting it to my phone I get stuck at bootlogo.
I did a logcat but cant really find what causes this.
someone can look at it and help me?
--------- beginning of /dev/log/main
I/Resize ( 86): The size of data already meet the request.
I/Resize ( 86): Partition has been resized,so nothing to do!
D/ADB_SERVICES( 158): install_listener('tcp:5037','*smartsocket*')
D/ADB_SERVICES( 158): adb_main(): pre init_jdwp()
D/ADB_SERVICES( 158): adb_main(): post init_jdwp()
D/ADB_SERVICES( 158): Event loop starting
D/ADB_SERVICES( 158): transport: 0xf67520 init'ing for usb_handle 0xf67498 (sn='')
I/ADB_SERVICES( 158): transport: usb
D/ADB_SERVICES( 158): transport: (null) registered
D/ADB_SERVICES( 158): transport: (null) (16,17) starting
W/ADB_SERVICES( 158): (null): starting transport input thread, reading from fd 17
W/ADB_SERVICES( 158): (null): starting transport output thread on fd 17, SYNC online (2)
D/ADB_SERVICES( 158): recv: SYNC 00000001 00000002 0000
W/ADB_SERVICES( 158): (null): transport SYNC online
E/ccci_mdinit(0)( 121): md_init ver:1.00
E/ccci_mdinit(0)( 120): md_init ver:1.00
I/6620_launcher( 117): open device node succeed.(Node:/dev/stpwmt, fd:3)
I/6620_launcher( 117): keypersist.mtk.wcn.combo.chipid)-value0x6628),chipId:0x6628
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): chiId:0x6628
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): set chipId(0x6628) to HIF-SDIO module
I/6620_launcher( 117): Info:key:mt6620.defAnt value:mt6620_ant_m3.cfg
I/6620_launcher( 117): Info:key:mt6628.defAnt value:mt6628_ant_m1.cfg
I/6620_launcher( 117): NULL is returned, eighter EOF or error maybe found
I/6620_launcher( 117): close /system/etc/firmware/WMT.cfg succeed
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): STP Mode is not set, fetching default mode...
I/6620_launcher( 117): chipId(0x6628), default Mode(1), strlen(gWmtCfgName)(39), wmtCfgFile(/system/etc/firmware//mt6628_ant_m1.cfg)
I/6620_launcher( 117): HifConfig:0x0001, wmtCfgFile:/system/etc/firmware//mt6628_ant_m1.cfg
I/6620_launcher( 117): keyro.build.type)-valueuser)
I/6620_launcher( 117): MCU patch folder path: /system/etc/firmware/
I/6620_launcher( 117): Common Interface: UART mode
I/6620_launcher( 117): MCU patch folder path: /system/etc/firmware/
I/6620_launcher( 117): Common Interface: UART mode
I/6620_launcher( 117): uart name ttyMT2
D/MsensorDaemon( 151): Msensor deamon statr!!!!!!!!!!!!
D/MsensorDaemon( 151): msensor demon start process detect demon name = memsicd3416x
D/MsensorDaemon( 151):
D/MsensorDaemon( 151): msensor demon start process detect demon prop = init.svc.memsicd3416x
D/MsensorDaemon( 151):
D/MsensorDaemon( 151): start_msensor_demon
D/MsensorDaemon( 151): HAVE_LIBC_SYSTEM_PROPERTIES
E/MsensorDaemon( 151): [99] ''
D/permission_check( 145): permission check ver:0.01
D/permission_check( 145): Empty, not decrypt!
D/permission_check( 145): change_md_nvram_attr++
--------- beginning of /dev/log/system
E/POAD ( 155): boot_mode = 0
E/POAD ( 155): update boot reason = 0
D/permission_check( 145): new_ver file exist!!!
D/permission_check( 145): change_md_nvram_attr--0
I/stp_dump( 143): ==>main
I/stp_dump( 143): stp_dump_ctrl_iface_trace_logger_sendto_fd succeed
E/stp_dump( 143): [STP_DBG] family id = 19
I/stp_dump( 143): sending dummy command
I/stp_dump( 143): set sock number to 9
I/stp_dump( 143): addr.sun_path:stp_DIR=/data/misc/stp_dump GROUP=stp
I/stp_dump( 143): Using existing control interface directory.
E/stp_dump( 143): mkdir (/data/misc/stp_dump) succeed
I/stp_dump( 143): ctrl_interface_group=1000 (from group name 'stp')
I/stp_dump( 143): chown (/data/misc/stp_dump) succeed
I/stp_dump( 143): CTRL: chmod[/data/misc/stp_dump] succeed
E/stp_dump( 143): ctrl_iface bind(PF_UNIX) failed: Address already in use
E/stp_dump( 143): ctrl_iface exists, but does not allow connections - assuming it was leftover from forced program termination
D/stp_dump( 143): Successfully replaced leftover ctrl_iface socket '/data/misc/stp_dump/stpd'
I/stp_dump( 143): set sock number to 10
I/stp_dump( 143): stp_dump_ctrl_iface_init succeed.
I/stp_dump( 143): ==>main222
I/busybox ( 114): run-parts: /system/etc/init.d: No such file or directory
D/wlanLoader( 144): checkSupport 0x6628
D/wlanLoader( 144): Match 0x6628
D/wlanLoader( 144): Get the correct chip version mt6628
D/wlanLoader( 144): Get chip Version mt6628.
D/wlanLoader( 144): DRIVER_MODULE_PATH is /system/lib/modules/wlan_mt6628.ko
D/MsensorDaemon( 151): HAVE_LIBC_SYSTEM_PROPERTIES
D/MsensorDaemon( 151): memsicd3416x running
D/MsensorDaemon( 151): Msensor deamon2 statr!!!!!!!!!!!!
D/MsensorDaemon( 151): open demon attr err = No such file or directory
E/stp_dump( 143): table == NULL || table->table == NULL
E/stp_dump( 143): table == NULL || table->table == NULL
D/wlanLoader( 144): Success to insmod the /system/lib/modules/wlan_mt6628.ko
I/thermal_repeater( 154): START+++++++++ 154
I/thermal_repeater( 154): Success to write 154 to /proc/wmt_tm/tm_pid
I/thermal_repeater( 154): Fail to chmod ffffffff
I/thermal_repeater( 154): Enter infinite loop
I/AEE/AED ( 122): Built Jan 30 2013 19:35:15
D/AEE/AED ( 122): ChangeAEEWorkMode: 3
I/AEE/AED ( 122): AED config
I/AEE/AED ( 122): mode '3'
I/AEE/AED ( 122): exp level '1
I/AEE/AED ( 122): dal enable '0'
I/AEE/AED ( 122): db count '20'
I/AEE/AED ( 122): db storage '1'
I/AEE/AED ( 122): SMP Info => 1
I/MobileLogD( 123): [void change_permission()] set mobile_log_d is in root user, adjust caps for its thread
I/MobileLogD( 123): mobilelog start after boot, mode:0
D/MobileLogD/cache( 123): init cache configure items....
D/MobileLogD/cache( 123): value of ro.build.type:user.
I/installd( 140): installd firing up
D/PQ ( 130): PQ init start...
D/PQ ( 130): PQ test...
I/ ( 137): ServiceManager: 0x41661698
D/PQ ( 130): PQ init end !
E/AEE/LIBAEE( 122): Can't remove file /sdcard/mtklog/aee_exp/temp: No such file or directory
E/AEE/LIBAEE( 122): Can't remove file /data/aee_exp/temp: No such file or directory
V/AEE/AED ( 122): ETB buffer length = 512
I/AEE/AED ( 122): wdt_status = 2, fiq_step=0
I/AEE/AED ( 122): reboot_reason = 0
V/AEE/AED ( 122): ETM start
D/installd( 140): LBE is enabled, starting...
D/NVRAM ( 152): NvRAMAgent created
E/NVRAM ( 152): Haman, serviceManager work well
D/NVRAM ( 152): NvRAMAgent Service is now ready
I/DPFD ( 149): [DPFD] main start ...
I/DPFD ( 149): [DPFD] set priority to RR:268435540
I/DPFD ( 149): [int adjustPriority()] set dpfd is in root user, adjust caps for its thread
D/DPFD ( 149): [DPFD] Wait Request.....
I/DMAgent ( 147): DMAgent created
I/DMAgent ( 147): [DMAgent]register OK.
D/DMAgent ( 147): DMAgent Service is now ready
D/MobileLogD( 123): write "mobilelog start after boot, mode:0" to mblog
E/installd( 140): Failed to load liblbesec.so
I/installd( 140): add service shelld success!
W/installd( 140): service start entry 'shelld', flag :0
W/installd( 140): starting 'shelld'
E/ccci_fsd(0)( 118): md_fsd Ver:v1.00
I/Hald ( 133): Hald 1.1011 starting
D/ccci_fsd(1)( 118): /dev/ccci_fs is opend(600).
D/ccci_fsd(1)( 118): Check OTP...
D/Hald ( 133): Create ResetManager
D/Hald ( 133): Size of initial message: 6
D/Hald ( 133): [MTK_WIFI] family id = 20
D/Hald ( 133): Reset Manager Prepare Dummy command
D/Hald ( 133): Reset Manager Send Command for binding
D/Hald ( 133): Start ResetManager
E/ccci_fsd(0)( 119): md_fsd Ver:v1.00
E/ccci_fsd(2)( 119): /dev/ccci2_fs is not enabled(2).
D/MobileLogD/cache( 123): config autostart=0 same as current value
D/MobileLogD/cache( 123): config logpath=/mnt/sdcard same as current value
D/MobileLogD/cache( 123): config logsize=300 same as current value
D/MobileLogD/cache( 123): config AndroidLog=1 same as current value
D/MobileLogD/cache( 123): config KernelLog=1 same as current value
D/MobileLogD/cache( 123): config BTLog=1 same as current value
D/MobileLogD/cache( 123): config BTLog=1 same as current value
E/MobileLogD/cache( 123): cant get true log path through property
E/MobileLogD/cache( 123): true path is /mnt/sdcard
D/MobileLogD( 123): create local socket server success
D/Vold ( 116): Check whether nvram restore ready!
D/NVRAM ( 128): g_i4CFG_File_Count: 25
D/NVRAM ( 128): NVM_Init Max Lid: 43
D/NVRAM ( 128): Total nvram Lid number is 43
I/Netd ( 125): Netd 1.0 starting
W/InterfaceController( 125): Warning (Cannot load library: load_library(linker.cpp:745): library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library
D/agps ( 142): [agps] WARNING: [Main] mtk_agpsd is running ver=0.46
D/agps ( 142): [agps] WARNING: [Main] mkdir failure for /data/agps_supl/log reason=[File exists]
D/MtkAgpsNative( 142): SuplRawLog.bEnable:0
D/MtkAgpsNative( 142): SuplRawLog.szPath:/sdcard
D/MtkAgpsNative( 142): SuplRawLog.szFile:agps_raw.log
D/MtkAgpsNative( 142): SuplSslLog.bEnable:0
D/MtkAgpsNative( 142): SuplSslLog.szPath:/sdcard
D/MtkAgpsNative( 142): SuplSslLog.szFile:agps_ssl.log
I/MtkAgpsNative( 142): Enter up_int_init
I/MtkAgpsNative( 142): Enter mtk_agps_up_init
D/MtkAgpsNative( 142): FS_CreateDir: /data/agps_supl
W/MtkAgpsNative( 142): -> errno(EEXIST) => dir already exists
D/MtkAgpsNative( 142): ############ mtk_agps_up_init --> agps_disable_enalbe_times = 1 ############
Click to expand...
Click to collapse
Hi Guys
So I tried to port a MIUI V5 4.4.2 ROM to my device and after rebooting after flashing it everytime, I get an unresponisve black screen but device is detected by adb so I can easily boot into recovery. Recovery.log is perfectly clear though no problems during flashing. But this logcat goes way overy my head. Can you guys please help me Don't ignore this thread as I have trying the port since a month and litreally tried all guides, videos, tut's, google etc but didn't end up on a satisfactory guide. No guide could solve the problme. Asked many porting devs still no answer. So lets begin with basic info.
I have XOLO HIVE 8x-1000 MT6592 with 2 GB Ram ( rest specs can be found here - XOLO 8x-1000 Specifications ) and the rom I am trying to port is ELephone P9 ported ROM, MIUI V5 for Elephone P9 which is really same as my device except NFC and CPU clocking as it's 1.7 Ghz and mine is 1.4 Ghz, here specs forELEPHONE P9.
So I assume you must have looked specs of both devices which prove that they are identical in most aspects and I also hope you took a proper look at the ROM I am trying to port as I provided the link. So I asked every person I could from a noob to a dev who can help me but no answer and even no guide on how to port MIUI KK V5 for MTK devices. My logcat is in first post. Please do have a look and reply to it.
EDIT : I am using Windows 7 Ultimate as OS and WinRAR to port and Notepad++ set in UNIX mode to edit all my stuff like updater-script etc and also added logcat.txt if you want to have a look later at offline mode. Please help me. :'(
Here is my logcat now : Part 1
D/libEGL ( 784): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 784): loaded /system/lib/egl/libGLESv1_CM_mali.so
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
D/libEGL ( 784): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 784): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/[MALI][Gralloc]( 784): dlopen libsec_mem.so fail
I/gralloc ( 784): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 784): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 784): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 784): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 784): ro_dpi: 320.000000
I/[MALI][Gralloc]( 784): using (fd=19)
I/[MALI][Gralloc]( 784): id = mtkfb
I/[MALI][Gralloc]( 784): xres = 720 px
I/[MALI][Gralloc]( 784): yres = 1280 px
I/[MALI][Gralloc]( 784): xres_virtual = 720 px
I/[MALI][Gralloc]( 784): yres_virtual = 3840 px
I/[MALI][Gralloc]( 784): bpp = 32
I/[MALI][Gralloc]( 784): r = 16:8
I/[MALI][Gralloc]( 784): g = 8:8
I/[MALI][Gralloc]( 784): b = 0:8
I/[MALI][Gralloc]( 784): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 784): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 784): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 784): init_framebuffer va: 0xb561c000 mva: 0xfeb00000
E/M4U_L ( 784): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 784): [DPY] Display Information:
I/hwcomposer( 784): [DPY] # fo devices : 1
I/hwcomposer( 784): [DPY] -----------------------------
I/hwcomposer( 784): [DPY] Device id : 0
I/hwcomposer( 784): [DPY] Width : 720
I/hwcomposer( 784): [DPY] Height : 1280
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/hwcomposer( 784): [DPY] xdpi : 320.000000
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/hwcomposer( 784): [DPY] ydpi : 320.000000
I/hwcomposer( 784): [DPY] vsync : 1
I/hwcomposer( 784): [DPY] refresh : 16507097
I/hwcomposer( 784): [DPY] connected : 1
I/hwcomposer( 784): [DPY] subtype : 0
W/hwcomposer( 784): [EVENT] HW VSync State(1)
W/hwcomposer( 784): [EVENT] Start to listen uevent, addr.nl_pid(784)
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 784): Using composer version 1.2
I/hwcomposer( 784): [HWC] getConfigs Display(0)
I/hwcomposer( 784): [HWC] getAttributes Display(0)
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/hwcomposer( 784): [HWC] getConfigs Display(1)
I/hwcomposer( 784): [HWC] getAttributes Display(1)
E/hwcomposer( 784): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 784): no suitable EGLConfig found, trying a simpler query
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 784): no suitable EGLConfig found, giving up
F/libc ( 784): Fatal signal 6 (SIGABRT) at 0x00000310 (code=-6), thread 784
(surfaceflinger)
F/libc ( 784): Unable to open connection to debuggerd: Connection refused
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): Netd 1.0 starting
W/InterfaceController( 820): Warning (dlopen failed: library "/system/lib/libne
tcmdiface.so" not found) while opening the net interface command library
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/SurfaceFlinger( 821): [int main(int, char**)] set surfaceflinger is in root u
ser, adjust caps for its thread
I/SurfaceFlinger( 821): SurfaceFlinger is starting
I/SurfaceFlinger( 821): SurfaceFlinger's main thread ready to run. Initializing
graphics H/W...
D/libEGL ( 821): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 821): loaded /system/lib/egl/libGLESv1_CM_mali.so
D/libEGL ( 821): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 821): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/[MALI][Gralloc]( 821): dlopen libsec_mem.so fail
I/gralloc ( 821): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 821): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 821): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 821): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 821): ro_dpi: 320.000000
I/[MALI][Gralloc]( 821): using (fd=19)
I/[MALI][Gralloc]( 821): id = mtkfb
I/[MALI][Gralloc]( 821): xres = 720 px
I/[MALI][Gralloc]( 821): yres = 1280 px
I/[MALI][Gralloc]( 821): xres_virtual = 720 px
I/[MALI][Gralloc]( 821): yres_virtual = 3840 px
I/[MALI][Gralloc]( 821): bpp = 32
I/[MALI][Gralloc]( 821): r = 16:8
I/[MALI][Gralloc]( 821): g = 8:8
I/[MALI][Gralloc]( 821): b = 0:8
I/[MALI][Gralloc]( 821): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 821): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 821): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 821): init_framebuffer va: 0xb5565000 mva: 0xfeb00000
E/M4U_L ( 821): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 821): [DPY] Display Information:
I/hwcomposer( 821): [DPY] # fo devices : 1
I/hwcomposer( 821): [DPY] -----------------------------
I/hwcomposer( 821): [DPY] Device id : 0
I/hwcomposer( 821): [DPY] Width : 720
I/hwcomposer( 821): [DPY] Height : 1280
I/hwcomposer( 821): [DPY] xdpi : 320.000000
I/hwcomposer( 821): [DPY] ydpi : 320.000000
I/hwcomposer( 821): [DPY] vsync : 1
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/hwcomposer( 821): [DPY] refresh : 16507097
I/hwcomposer( 821): [DPY] connected : 1
I/hwcomposer( 821): [DPY] subtype : 0
W/hwcomposer( 821): [EVENT] HW VSync State(1)
W/hwcomposer( 821): [EVENT] Start to listen uevent, addr.nl_pid(821)
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 821): Using composer version 1.2
I/hwcomposer( 821): [HWC] getConfigs Display(0)
I/hwcomposer( 821): [HWC] getAttributes Display(0)
I/hwcomposer( 821): [HWC] getConfigs Display(1)
I/hwcomposer( 821): [HWC] getAttributes Display(1)
E/hwcomposer( 821): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 821): no suitable EGLConfig found, trying a simpler query
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 821): no suitable EGLConfig found, giving up
F/libc ( 821): Fatal signal 6 (SIGABRT) at 0x00000335 (code=-6), thread 821
(surfaceflinger)
F/libc ( 821): Unable to open connection to debuggerd: Connection refused
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/sn ( 191): Retry 5
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Check all possible paths
I/Netd ( 858): Netd 1.0 starting
W/InterfaceController( 858): Warning (dlopen failed: library "/system/lib/libne
tcmdiface.so" not found) while opening the net interface command library
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/ADB_SERVICES( 198): adb fdevent_process list (12) (18)
D/ADB_SERVICES( 198): adb socket read list (18)
D/ADB_SERVICES( 198): read_data=11945
D/ADB_SERVICES( 198): max_read_time=0.000080 max_send_time=0.000063
D/ADB_SERVICES( 198): adb local_socket_ready list (18)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/SurfaceFlinger( 859): [int main(int, char**)] set surfaceflinger is in root u
ser, adjust caps for its thread
I/SurfaceFlinger( 859): SurfaceFlinger is starting
I/SurfaceFlinger( 859): SurfaceFlinger's main thread ready to run. Initializing
graphics H/W...
D/libEGL ( 859): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 859): loaded /system/lib/egl/libGLESv1_CM_mali.so
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/libEGL ( 859): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 859): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/[MALI][Gralloc]( 859): dlopen libsec_mem.so fail
I/gralloc ( 859): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 859): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 859): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 859): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 859): ro_dpi: 320.000000
I/[MALI][Gralloc]( 859): using (fd=19)
I/[MALI][Gralloc]( 859): id = mtkfb
I/[MALI][Gralloc]( 859): xres = 720 px
I/[MALI][Gralloc]( 859): yres = 1280 px
I/[MALI][Gralloc]( 859): xres_virtual = 720 px
I/[MALI][Gralloc]( 859): yres_virtual = 3840 px
I/[MALI][Gralloc]( 859): bpp = 32
I/[MALI][Gralloc]( 859): r = 16:8
I/[MALI][Gralloc]( 859): g = 8:8
I/[MALI][Gralloc]( 859): b = 0:8
I/[MALI][Gralloc]( 859): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 859): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 859): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 859): init_framebuffer va: 0xb55c4000 mva: 0xfeb00000
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
Logcat Part 2
E/M4U_L ( 859): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 859): [DPY] Display Information:
I/hwcomposer( 859): [DPY] # fo devices : 1
I/hwcomposer( 859): [DPY] -----------------------------
I/hwcomposer( 859): [DPY] Device id : 0
I/hwcomposer( 859): [DPY] Width : 720
I/hwcomposer( 859): [DPY] Height : 1280
I/hwcomposer( 859): [DPY] xdpi : 320.000000
I/hwcomposer( 859): [DPY] ydpi : 320.000000
I/hwcomposer( 859): [DPY] vsync : 1
I/hwcomposer( 859): [DPY] refresh : 16507097
I/hwcomposer( 859): [DPY] connected : 1
I/hwcomposer( 859): [DPY] subtype : 0
W/hwcomposer( 859): [EVENT] HW VSync State(1)
W/hwcomposer( 859): [EVENT] Start to listen uevent, addr.nl_pid(859)
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 859): Using composer version 1.2
I/hwcomposer( 859): [HWC] getConfigs Display(0)
I/hwcomposer( 859): [HWC] getAttributes Display(0)
I/hwcomposer( 859): [HWC] getConfigs Display(1)
I/hwcomposer( 859): [HWC] getAttributes Display(1)
E/hwcomposer( 859): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 859): no suitable EGLConfig found, trying a simpler query
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 859): no suitable EGLConfig found, giving up
F/libc ( 859): Fatal signal 6 (SIGABRT) at 0x0000035b (code=-6), thread 859
(surfaceflinger)
F/libc ( 859): Unable to open connection to debuggerd: Connection refused
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/iptables( 858): iptables: Chain already exists.
I/iptables( 858): iptables terminated by exit(1)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
E/Netd ( 858): exec() res=0, status=256 for /system/bin/iptables -t filter -
N firewall
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/ip6tables( 858): ip6tables: Chain already exists.
I/ip6tables( 858): ip6tables terminated by exit(1)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
E/Netd ( 858): exec() res=0, status=256 for /system/bin/ip6tables -t filter
-N firewall
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/libEGL ( 784): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 784): loaded /system/lib/egl/libGLESv1_CM_mali.so
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
D/libEGL ( 784): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 784): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/[MALI][Gralloc]( 784): dlopen libsec_mem.so fail
I/gralloc ( 784): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 784): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 784): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 784): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 784): ro_dpi: 320.000000
I/[MALI][Gralloc]( 784): using (fd=19)
I/[MALI][Gralloc]( 784): id = mtkfb
I/[MALI][Gralloc]( 784): xres = 720 px
I/[MALI][Gralloc]( 784): yres = 1280 px
I/[MALI][Gralloc]( 784): xres_virtual = 720 px
I/[MALI][Gralloc]( 784): yres_virtual = 3840 px
I/[MALI][Gralloc]( 784): bpp = 32
I/[MALI][Gralloc]( 784): r = 16:8
I/[MALI][Gralloc]( 784): g = 8:8
I/[MALI][Gralloc]( 784): b = 0:8
I/[MALI][Gralloc]( 784): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 784): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 784): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 784): init_framebuffer va: 0xb561c000 mva: 0xfeb00000
E/M4U_L ( 784): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 784): [DPY] Display Information:
I/hwcomposer( 784): [DPY] # fo devices : 1
I/hwcomposer( 784): [DPY] -----------------------------
I/hwcomposer( 784): [DPY] Device id : 0
I/hwcomposer( 784): [DPY] Width : 720
I/hwcomposer( 784): [DPY] Height : 1280
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/hwcomposer( 784): [DPY] xdpi : 320.000000
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/hwcomposer( 784): [DPY] ydpi : 320.000000
I/hwcomposer( 784): [DPY] vsync : 1
I/hwcomposer( 784): [DPY] refresh : 16507097
I/hwcomposer( 784): [DPY] connected : 1
I/hwcomposer( 784): [DPY] subtype : 0
W/hwcomposer( 784): [EVENT] HW VSync State(1)
W/hwcomposer( 784): [EVENT] Start to listen uevent, addr.nl_pid(784)
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 784): Using composer version 1.2
I/hwcomposer( 784): [HWC] getConfigs Display(0)
I/hwcomposer( 784): [HWC] getAttributes Display(0)
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/hwcomposer( 784): [HWC] getConfigs Display(1)
I/hwcomposer( 784): [HWC] getAttributes Display(1)
E/hwcomposer( 784): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 784): no suitable EGLConfig found, trying a simpler query
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 784): no suitable EGLConfig found, giving up
F/libc ( 784): Fatal signal 6 (SIGABRT) at 0x00000310 (code=-6), thread 784
(surfaceflinger)
F/libc ( 784): Unable to open connection to debuggerd: Connection refused
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): Netd 1.0 starting
W/InterfaceController( 820): Warning (dlopen failed: library "/system/lib/libne
tcmdiface.so" not found) while opening the net interface command library
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/SurfaceFlinger( 821): [int main(int, char**)] set surfaceflinger is in root u
ser, adjust caps for its thread
I/SurfaceFlinger( 821): SurfaceFlinger is starting
I/SurfaceFlinger( 821): SurfaceFlinger's main thread ready to run. Initializing
graphics H/W...
D/libEGL ( 821): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 821): loaded /system/lib/egl/libGLESv1_CM_mali.so
D/libEGL ( 821): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 821): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/[MALI][Gralloc]( 821): dlopen libsec_mem.so fail
I/gralloc ( 821): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 821): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 821): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 821): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 821): ro_dpi: 320.000000
I/[MALI][Gralloc]( 821): using (fd=19)
I/[MALI][Gralloc]( 821): id = mtkfb
I/[MALI][Gralloc]( 821): xres = 720 px
I/[MALI][Gralloc]( 821): yres = 1280 px
I/[MALI][Gralloc]( 821): xres_virtual = 720 px
I/[MALI][Gralloc]( 821): yres_virtual = 3840 px
I/[MALI][Gralloc]( 821): bpp = 32
I/[MALI][Gralloc]( 821): r = 16:8
I/[MALI][Gralloc]( 821): g = 8:8
I/[MALI][Gralloc]( 821): b = 0:8
I/[MALI][Gralloc]( 821): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 821): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 821): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 821): init_framebuffer va: 0xb5565000 mva: 0xfeb00000
E/M4U_L ( 821): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 821): [DPY] Display Information:
I/hwcomposer( 821): [DPY] # fo devices : 1
I/hwcomposer( 821): [DPY] -----------------------------
I/hwcomposer( 821): [DPY] Device id : 0
I/hwcomposer( 821): [DPY] Width : 720
I/hwcomposer( 821): [DPY] Height : 1280
I/hwcomposer( 821): [DPY] xdpi : 320.000000
I/hwcomposer( 821): [DPY] ydpi : 320.000000
I/hwcomposer( 821): [DPY] vsync : 1
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/hwcomposer( 821): [DPY] refresh : 16507097
I/hwcomposer( 821): [DPY] connected : 1
I/hwcomposer( 821): [DPY] subtype : 0
W/hwcomposer( 821): [EVENT] HW VSync State(1)
W/hwcomposer( 821): [EVENT] Start to listen uevent, addr.nl_pid(821)
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 821): Using composer version 1.2
I/hwcomposer( 821): [HWC] getConfigs Display(0)
I/hwcomposer( 821): [HWC] getAttributes Display(0)
I/hwcomposer( 821): [HWC] getConfigs Display(1)
I/hwcomposer( 821): [HWC] getAttributes Display(1)
E/hwcomposer( 821): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 821): no suitable EGLConfig found, trying a simpler query
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 821): no suitable EGLConfig found, giving up
F/libc ( 821): Fatal signal 6 (SIGABRT) at 0x00000335 (code=-6), thread 821
(surfaceflinger)
F/libc ( 821): Unable to open connection to debuggerd: Connection refused
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/sn ( 191): Retry 5
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Check all possible paths
I/Netd ( 858): Netd 1.0 starting
W/InterfaceController( 858): Warning (dlopen failed: library "/system/lib/libne
tcmdiface.so" not found) while opening the net interface command library
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/ADB_SERVICES( 198): adb fdevent_process list (12) (18)
D/ADB_SERVICES( 198): adb socket read list (18)
D/ADB_SERVICES( 198): read_data=11945
D/ADB_SERVICES( 198): max_read_time=0.000080 max_send_time=0.000063
D/ADB_SERVICES( 198): adb local_socket_ready list (18)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/SurfaceFlinger( 859): [int main(int, char**)] set surfaceflinger is in root u
ser, adjust caps for its thread
I/SurfaceFlinger( 859): SurfaceFlinger is starting
I/SurfaceFlinger( 859): SurfaceFlinger's main thread ready to run. Initializing
graphics H/W...
D/libEGL ( 859): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 859): loaded /system/lib/egl/libGLESv1_CM_mali.so
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/libEGL ( 859): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 859): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/[MALI][Gralloc]( 859): dlopen libsec_mem.so fail
I/gralloc ( 859): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 859): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 859): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 859): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 859): ro_dpi: 320.000000
I/[MALI][Gralloc]( 859): using (fd=19)
I/[MALI][Gralloc]( 859): id = mtkfb
I/[MALI][Gralloc]( 859): xres = 720 px
I/[MALI][Gralloc]( 859): yres = 1280 px
I/[MALI][Gralloc]( 859): xres_virtual = 720 px
I/[MALI][Gralloc]( 859): yres_virtual = 3840 px
I/[MALI][Gralloc]( 859): bpp = 32
I/[MALI][Gralloc]( 859): r = 16:8
I/[MALI][Gralloc]( 859): g = 8:8
I/[MALI][Gralloc]( 859): b = 0:8
I/[MALI][Gralloc]( 859): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 859): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 859): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 859): init_framebuffer va: 0xb55c4000 mva: 0xfeb00000
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
E/M4U_L ( 859): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 859): [DPY] Display Information:
I/hwcomposer( 859): [DPY] # fo devices : 1
I/hwcomposer( 859): [DPY] -----------------------------
I/hwcomposer( 859): [DPY] Device id : 0
I/hwcomposer( 859): [DPY] Width : 720
I/hwcomposer( 859): [DPY] Height : 1280
I/hwcomposer( 859): [DPY] xdpi : 320.000000
I/hwcomposer( 859): [DPY] ydpi : 320.000000
I/hwcomposer( 859): [DPY] vsync : 1
I/hwcomposer( 859): [DPY] refresh : 16507097
I/hwcomposer( 859): [DPY] connected : 1
I/hwcomposer( 859): [DPY] subtype : 0
W/hwcomposer( 859): [EVENT] HW VSync State(1)
W/hwcomposer( 859): [EVENT] Start to listen uevent, addr.nl_pid(859)
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 859): Using composer version 1.2
I/hwcomposer( 859): [HWC] getConfigs Display(0)
I/hwcomposer( 859): [HWC] getAttributes Display(0)
I/hwcomposer( 859): [HWC] getConfigs Display(1)
I/hwcomposer( 859): [HWC] getAttributes Display(1)
E/hwcomposer( 859): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 859): no suitable EGLConfig found, trying a simpler query
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 859): no suitable EGLConfig found, giving up
F/libc ( 859): Fatal signal 6 (SIGABRT) at 0x0000035b (code=-6), thread 859
(surfaceflinger)
F/libc ( 859): Unable to open connection to debuggerd: Connection refused
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/iptables( 858): iptables: Chain already exists.
I/iptables( 858): iptables terminated by exit(1)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
E/Netd ( 858): exec() res=0, status=256 for /system/bin/iptables -t filter -
N firewall
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/ip6tables( 858): ip6tables: Chain already exists.
I/ip6tables( 858): ip6tables terminated by exit(1)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
E/Netd ( 858): exec() res=0, status=256 for /system/bin/ip6tables -t filter
-N firewall
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
[/SIZE][/B]
Now please help me! As I am clueless where to begin or where to end! :crying::silly:
Fixed it
Moderator please close this thread
Sent from my bobobibi
Tech N You said:
Fixed it
Moderator please close this thread
Click to expand...
Click to collapse
How did you fix it?
Bormental said:
How did you fix it?
Click to expand...
Click to collapse
LIBEGL errors are gpu ones.
I replaced libmali.so and it worked
Sent from 8x-1000 Using XXX ROM (Xceptional XPERIA Xperiance)
Tech N You said:
LIBEGL errors are gpu ones.
I replaced libmali.so and it worked
Click to expand...
Click to collapse
it works. Thank you!
Bormental said:
it works. Thank you!
Click to expand...
Click to collapse
Glad I helped you
Sent from 8x-1000 Using XXX ROM (Xceptional XPERIA Xperiance)