custom rom noob help needed NUU Z8 - Android Q&A, Help & Troubleshooting

Hello I'm new to this forum and I'd like to ask some questions.
I have one of the most unknown phone on the market I guess, it's a Nuu Z8.
I believe there isn't a single thread about the Nuu Z8. Anyway to my point I was looking for a custom ROM (like CyanogenMod) but of course it doesn't support my phone.
Then I started to ask myself and now you guys, could it be that I can use a CyanogenMod ROM that isn't meant to be for my phone but possibly could work because it is made for the same architecture and stuff? (I found a few ROMS made for my architecture)
further specs:
cpu:
- MediaTek MT6752
- ARM Cortex-A53
- 64bit
- ARMv8-A
- 1700MHz
- 8 cores
GPU:
- ARM Mali-T760 MP2
- 2 cores
- 700MHz
RAM:
- 2GB of LPDDR3 800MHz single channel RAM
storage:
-32GB
DUAL sim and sd card
5.5" screen with 1080x1920 pixels
if more specs are needed you have to google:" NUU Moblie Z8 - Specifications devicespecifications . com
Edit: There also isn't a cwm or twrp custom recovery menu made for my phone but I can flash ROMS and ZIP/OTA files using flashfire.
I believe this also means that when I brick my phone I can't install the default ROM because I don't have an custom recovery menu.
Edit2: I believe I was directed from the XDA assist to this Q&A page do correct me if I'm (again) on the wrong side of the forum

Hello. I same you. I have mobile NUU Z8 32 GB, now can not work. when turn on power, screen only run logo N and then stop. I recovery mode but is not succeed. And I try reboot system but not surefire.
Special this is mobilephone not connect with PC.

Ngo Hieu said:
Hello. I same you. I have mobile NUU Z8 32 GB, now can not work. when turn on power, screen only run logo N and then stop. I recovery mode but is not succeed. And I try reboot system but not surefire.
Special this is mobilephone not connect with PC.
Click to expand...
Click to collapse
I don't have my nuu z8 anymore because i broke it repaired it but i couldn't call anymore anyway you have a boot loop (you probably figured that out) and what you should do is download sp flashtool and a stock rom from needrom.com and look up a tutorial on how to use spflashtools.

nuu z8
Gimly161 said:
Hello I'm new to this forum and I'd like to ask some questions.
I have one of the most unknown phone on the market I guess, it's a Nuu Z8.
I believe there isn't a single thread about the Nuu Z8. Anyway to my point I was looking for a custom ROM (like CyanogenMod) but of course it doesn't support my phone.
Then I started to ask myself and now you guys, could it be that I can use a CyanogenMod ROM that isn't meant to be for my phone but possibly could work because it is made for the same architecture and stuff? (I found a few ROMS made for my architecture)
further specs:
cpu:
- MediaTek MT6752
- ARM Cortex-A53
- 64bit
- ARMv8-A
- 1700MHz
- 8 cores
GPU:
- ARM Mali-T760 MP2
- 2 cores
- 700MHz
RAM:
- 2GB of LPDDR3 800MHz single channel RAM
storage:
-32GB
DUAL sim and sd card
5.5" screen with 1080x1920 pixels
if more specs are needed you have to google:" NUU Moblie Z8 - Specifications devicespecifications . com
Edit: There also isn't a cwm or twrp custom recovery menu made for my phone but I can flash ROMS and ZIP/OTA files using flashfire.
I believe this also means that when I brick my phone I can't install the default ROM because I don't have an custom recovery menu.
Edit2: I believe I was directed from the XDA assist to this Q&A page do correct me if I'm (again) on the wrong side of the forum
Click to expand...
Click to collapse
hi,
i was wondering if you ever found a rom for this phone.
i also have it .. the reason im asking is because i am having a lot of problems with the phone and was hoping a different rom might cure the glitches.
do you have any problems with your phone? mine turns off when the battery gets below 60 "%.
google maps was not reliable on local trips around town. so i am hoping you might be able to help

Related

Flashed a wrong CWM recovery. Stuck on bootloop. CHUWI V7 Tablet

Hello people,
My tablet is supposedly an import from China with the manufacturing name as Chuwi v7 nuclear and rebranded in our country by a company named Milagrow as TabTop 7.16. It has the following specs:
1.2 GHz, ARM Cortex A8
512 DDR3
Dual Mali - 400 MP[/QUOTE]
My problem is that I successfully rooted the tablet. And I haven't touched the firmware yet. Since the stock rom wasn't good enough, I went ahead with attempting to find a suitable CWM (Clockworkmod recovery). Turns I couldn't find a compatible version with my tablet, but I went ahead and tried some others. In this processes I flashed an incorrect CWM, the tablet is now stuck at the android boot logo.
Any pointers on how I could fix this?
Good day
Common guys. I need your help :crying:
Flash Stock..
sabergeek said:
Hello people,
My tablet is supposedly an import from China with the manufacturing name as Chuwi v7 nuclear and rebranded in our country by a company named Milagrow as TabTop 7.16. It has the following specs:
1.2 GHz, ARM Cortex A8
512 DDR3
Dual Mali - 400 MP
Click to expand...
Click to collapse
My problem is that I successfully rooted the tablet. And I haven't touched the firmware yet. Since the stock rom wasn't good enough, I went ahead with attempting to find a suitable CWM (Clockworkmod recovery). Turns I couldn't find a compatible version with my tablet, but I went ahead and tried some others. In this processes I flashed an incorrect CWM, the tablet is now stuck at the android boot logo.
Any pointers on how I could fix this?
Good day [/QUOTE]
I don't know about this tablet but try to find / download stock firmware and install it i thing via odin .. should fix your issue , worked for me on other tablet
I suppose It get solved if PC detects your device .I mean ADB detects.Then try other cwm recovery versions.

[Q] Sansui Etab 801 Cortex A8 Problem

Update: I just got the original firmware sent via customer service.. but do not know if it would work or not.. Just updating..I'm scared cuz the firmware I flashed it with was for a Cortex A9 device.
I have a Sansui Etab 801 Cortex A8 Android Tablet. It got stuck in boot loop and after trying several firmwares which didnt work, kept asking for uImage_recovery, uImage, u-boot-aml-ucl.bin, factory_update_param.aml etc file. After some search I came across a ROM, for Ramos tablet, I used it cuz it has the uImage_recovery, uImage, u-boot-aml-ucl.bin, factory_update_param.aml files etc. When I inserted it into the TF card and did an upgrade, the device would not start up at all. Just some lights on the controls.
When I insert into PC, it recognizes it as M3-chip, I found out about the AML flashing tool..I am stuck at "write data to ram failed" and I guess it is because of usb_spl.bin. Is there a way to create a separate usb_spl.bin for my device or it IS IT THE SAME FOR ALL TABLETS?
If it is the same for all device, thats a problem as I'm just stuck at write data to ram failed.
HELP!
I found out that the firmware I flashed it with was for a Cortex A9 device...
Thanks!
same problem sansui etab 801 vp
curlyjoe123 said:
Update: I just got the original firmware sent via customer service.. but do not know if it would work or not.. Just updating..I'm scared cuz the firmware I flashed it with was for a Cortex A9 device.
I have a Sansui Etab 801 Cortex A8 Android Tablet. It got stuck in boot loop and after trying several firmwares which didnt work, kept asking for uImage_recovery, uImage, u-boot-aml-ucl.bin, factory_update_param.aml etc file. After some search I came across a ROM, for Ramos tablet, I used it cuz it has the uImage_recovery, uImage, u-boot-aml-ucl.bin, factory_update_param.aml files etc. When I inserted it into the TF card and did an upgrade, the device would not start up at all. Just some lights on the controls.
When I insert into PC, it recognizes it as M3-chip, I found out about the AML flashing tool..I am stuck at "write data to ram failed" and I guess it is because of usb_spl.bin. Is there a way to create a separate usb_spl.bin for my device or it IS IT THE SAME FOR ALL TABLETS?
If it is the same for all device, thats a problem as I'm just stuck at write data to ram failed.
HELP!
I found out that the firmware I flashed it with was for a Cortex A9 device...
Thanks!
Click to expand...
Click to collapse
Hi,
I am now facing same problem withmy tablet sansui and I can't find a way to solve it.
Some of my friend recommended to use UBEROID but Iha ve my douts about it.
Did you found a solution?

Need Rom Jlinksz i960 K107 MediaTek MTK6592T Octa Core 1.6 GHz,4gb Ram,32GB, Dual Sim

Need ROM for Jlinksz i960 K107 MediaTek MTK6592T Octa Core 1.6 GHz, 4gb Ram, 32GB, Dual Sim, 10.1", "Android 5.1" "Tablet"
This tablet got stuck on an Android logo. I tried to flash it with what the seller says was the correct firmware but it was not. And now I am stuck with it!!
Connects to SP Flash tool. I have installed the correct drivers. As well as I can connect with SP Flash Tool using Linux also.
Could someone please help me find the correct firmware for this tablet or if anyone has one, could they make a back up, which would be really good as I would know its 100% the correct one.
Thanks in advance.
I've got mine stacked to MEDIATECK LOGO and.........
Skelmy said:
Need ROM for Jlinksz i960 K107 MediaTek MTK6592T Octa Core 1.6 GHz, 4gb Ram, 32GB, Dual Sim, 10.1", "Android 5.1" "Tablet"
This tablet got stuck on an Android logo. I tried to flash it with what the seller says was the correct firmware but it was not. And now I am stuck with it!!
Connects to SP Flash tool. I have installed the correct drivers. As well as I can connect with SP Flash Tool using Linux also.
Could someone please help me find the correct firmware for this tablet or if anyone has one, could they make a back up, which would be really good as I would know its 100% the correct one.
Thanks in advance.
Click to expand...
Click to collapse
Hi! I've got mine stacked to MEDIATEK LOGO!. I try to connect it to my PC (Win 7) but the driver installs but when I connect the tablet with the usb cable it connects at first and disconnects imediately!.. So I CANNOT USE ANY IMAGE PROGRAMME!. What is the steps you did to connect it to your pc?.
Thanks!
Skelmy said:
Need ROM for Jlinksz i960 K107 MediaTek MTK6592T Octa Core 1.6 GHz, 4gb Ram, 32GB, Dual Sim, 10.1", "Android 5.1" "Tablet"
This tablet got stuck on an Android logo. I tried to flash it with what the seller says was the correct firmware but it was not. And now I am stuck with it!!
Connects to SP Flash tool. I have installed the correct drivers. As well as I can connect with SP Flash Tool using Linux also.
Could someone please help me find the correct firmware for this tablet or if anyone has one, could they make a back up, which would be really good as I would know its 100% the correct one.
Thanks in advance.
Click to expand...
Click to collapse
Hey, sorry for the long reply. I haven't been on here in years. I cannot remember now. I sent the tablet back in the end, as he gave me the file to flash to the tablet. I just got my money back, he gave me the file and the instructions on what to do, from the actual manufacturer in China, and this happened. So they are not good.
Currently looking for anything other than M-Rom for a Sony Xperia Z3+ Dual (Z4 in Japan rest of the world Z3+, very odd thing for Sony to do).
Regards

Cherry Mobile Flare S3 Mini Q620 (Philippines local brand smartphone) Issue: Deadboot

I have the device as per the title of this thread says. I've flashed recovery before using fastboot, but this time around, since the device is completely dead, as in it won't boot up, nor show any notification lights (I also tried removing the battery and connecting the charger to see if the logo will appear, but it did not), I don't have any means to connect it to my pc using fastboot. Is there a way that I can "program" a stock rom via pc without the help of fastboot and other recovery? Please enlighten me on this one, I needed some ideas. I've searched that mediatek have spflashtool with the scatter file which is, basically, for most of mediatek devices. I'm hesitant to try that one as this phone is running on a sc8830 spreadtrum chip.
So there, any kind of help are highly appreciated. Thank you XDA more power .
Device specifications
1.3 ghz sc8830 Spreadtrum Series : Cortex A7
Android 4.4 Kitkat
512mb ram
4gb rom

root access mediatek mt6797

hello everyone and thankyou for your help ... i have three mediatek tab910 mt6797 tablets i have tried magix,i have tried kingoroot along with a few others and have had zero luck with gaining root access, as of now im not wanting to instal a custom rom i only would like to gain permanate root access so that i can debloat and adjust core speeds etc . For a 10 core 500gb tab its very laggy ,instances force stop on thete own and so on ,im no pc genious and dont know what else to do so some or any help is most welcomed,
Thank you all for your time ...below is the tab specs any other ifo needed ill be more then happy to post as this has been a on going headach
Manufacture
Stack
Model ID
TAB910
Android Version
10.0
Kernel Version
3.10.72+
Battery Capacity
8500 mAh
SoC (Processor)
Architecture
ARM (armv7l)
SoC Model
MediaTek Helio X20/X23/X25/X27
SoC Family
10x ARM Cortex-A7 @2.30 GHz
Frequency
2300 MHz / Min: 728 MHz - Max: 2300 MHz
Main CPU Cores
10 Cores / 10 Threads
Process
20 nm
CPUID
41.0.7.C07.4
Revision
R0P4
Features
SWP HALF THUMB FASTMULT VFP EDSP THUMBEE NEON VFPV3 TLS VFPV4 IDIVA IDIVT
Bogomips
70.76 MIPS
Display (GPU / LCD)
SoC Manufacturer
ARM
SoC Model
Mali-450 MP
OpenGL Ver.
2.0
LCD Size
10.6 inches / 26.9 cm
LCD Resolution
1200 x 1920 pixels
LCD Definition
213 DPI
Memory
RAM
8096 MB (8 GB)
Flash
488281 MB
Embedded Sensor
Sensor #1
BMA056 3-axis Accelerometer
Sensor #2
BMM056 3-axis Magnetic Field sensor
Sensor #3
BMM056 Orientation sensor
Sensor #4
RPR410 Proximity Sensor
Sensor #5
RPR410 Light Sensor
Hello I got a similar tablet with the same name Mediatek TAB910. however mt6592
I succeeded to root it with kingoroot. then changed kigoroot superuser with su superuser.
I was trying to upgrade android version (cause it was a fake android 12: it was just lollipop 5.1).
When I tried to install TWRP, I think I brick the tab
Now it's not recognized on my laptop, with a boot loop (I guess, since i only hear it popping up and down when linked through usb) Mediatek usb Port (COM XX). Dark screen.
tried several solutions to the resurruction, but none yet working.
Any help would be appreciated, even suggesting to get rid of it.
Update : my android tablet is stuck on android text booting
Update : it works i flashed files found on the net (userdata and cache). Then wiped e-mmc by holding power and volume down (chinese menu).
However am back to lollipop 5.1.
Gonna try to find a solution after taking a break
I'll look at all the numbers on mine and attach a pic later in if every thing corresponds with your maby you can leave some detail on the process you used to gain perm root cause I've tried everything with nobsuccess
I know on these media Tek you need to use spflash tool to create a scatter file before making a custom recovery have you looked into that? I'm not really familiar with the process on a media Tek I've looked onlin e and read a few diff arrivals but Tobe honest I was all but stumpped
I followed the steps on the vid
How to Root every MTK China Phone - Readback With SP-Flash​("
")
I downloaded 3 versions of sp-flash so it worked.
However couldn't get the file (loader.bin) I did it a week after with a russian tool.
And I couldn't root via twrp since i don't have it. I rooted via kingoroot. (i needed to launch the app 3 times before it works).
Now am back to lolipop. If i try to unlock the bootloader, i am stuck in bootloop, and I need to restore a loked bootloader I guess no way to upgrade. Any ideas how to get android 10?
dirk1nowitzki said:
I followed the steps on the vid
How to Root every MTK China Phone - Readback With SP-Flash​("
")
I downloaded 3 versions of sp-flash so it worked.
However couldn't get the file (loader.bin) I did it a week after with a russian tool.
And I couldn't root via twrp since i don't have it. I rooted via kingoroot. (i needed to launch the app 3 times before it works).
Now am back to lolipop. If i try to unlock the bootloader, i am stuck in bootloop, and I need to restore a loked bootloader I guess no way to upgrade. Any ideas how to get android 10?
Click to expand...
Click to collapse
Nope no idea not very tec savy I'm stuck
did you try fill ram memory test?
I uploaded files if that can help you "https://www.needrom.com/download/mt6592-tab910/"
dirk1nowitzki said:
did you try fill ram memory test?
Click to expand...
Click to collapse
I'll take a look at it thank you
dirk1nowitzki i has joined needrom but the system.img is missing..can u upload to provide site..i messed up my tab910 now no firmware..but either still work with SP Tools.

Categories

Resources