Hi my device is redmi note 3 snapdragon. i tried installing twrp 3.1.1.1 and then updated it using twrp manager, flashed magisk module. was using lineage os. but when i tried flashing my stock rom using mi flash tool, it is showing as error, and was showing fastboot mode, but when i tried to restart the device the device turned off and only the red notification light is blinking continously.. what was the problem/ Somebody please help me
Hello all,
I have a Xiomi MI 4 and now it is not booting. When i power on , it only shows blinking MI logo. I can't access the recovery mode but i can access the fastboot mode. I tried to flash stock rom via MiFlash app but it shows "flash partition error". I use cmd to unlock bootloader and it shows done! Then i tried to flash recovery and it again shows done. But i can't access the recovery yet. Phone only shows blinking MI logo! Anyone please help me:crying:.....
Hi, today I encountered a serious problem with my xiaomi mi 8. In practice I was installing the oxygen os rom, but without success. So I went to the xda page where the rom linked and installed this zip file: OOS_dipper-reboot-fix. In practice, turning on the device after installing the zip file in question, the xiaomi logo does not appear, but the Oneplus logo, and then the fastboot screen. What should I do?????
I tried to install other roms, but without success, and now when I do the Wipe, it also tells me unable to mount storage!
I don't really know what to do.
Hello guys,
I have a problem with installing and starting TWRP for the Mi 8 Pro Explorer Edition (Codenamed Ursa).
I have the latest version of Miui Global available for my device (MIUI 12.0.1), and I have unlocked the bootloader with the official procedure (successfully).
I followed the guide for MIUI.eu (the same with all devices to tell the truth) to install the latest TWRP available, but when TWRP starts the device remains off. I can get into fastboot or start it normally, but I can't install it despite ADB giving me positive results.I also tried to install older TWRP, but the result is the same, the device does not start the TWRP, remaining off. Anyone have a solution?
Thanks a lot to everyone
Ps. When I unlocked the bootloader I had to enter some registry keys otherwise the annoying bug came out that when connecting the device to the PC it came out of fastboot mode, opening a black page with a white writing at the top left
PPS. I want install MIUI.eu 12.5, So I'm wasting all this time
Does it show any error when you try to run these command?
fastboot flash recovery twrp.img
fastboot boot twrp.img
Click to expand...
Click to collapse
jwhan said:
Does it show any error when you try to run these command?
Click to expand...
Click to collapse
The solution is use the TWRP 3.2.3 CN by wzsx150, and work perfectly. Now I have found the solution...
THX anyway
Hi, I have a semibrick on my X3 Superzoom (Global), and I can't seem to restore the original firmware. When it was working properly, I think the phone was updated to the latest version available in Europe (RMX2081EU_11.A.50), hence Realme UI 1.0.
I do not remember very well what I did, it's been a few weeks since my "screw up", I must have flashed an untrusted firmware, the thing is that when rebooting the screen looks black and goes into a continuous bootloop, but allows to enter fastboot mode with power + Vol down (I know because I can launch fastboot commands). Curiously, when it goes into bootloop you don't see the Realme logo, I discovered that the logo is there but with the screen illumination at minimum, and you can only glimpse a little if you put it under a lamp. Very strange.
Since it can go into fastboot mode I have tried flashing several firmwares for my phone, RMX2086 and none of them repair brik. I have tried always by command line because with MsmDownloadTool I don't have login access and with Realme Flash Tool always shows error "cannot find central directory", I have tried also with QFil and I can't get it to stay stable on the port.
I flash with command line with "fastboot flash" all .img files of super, recovery, boot, boot, dtbo, vbmeta (in that order) but it does nothing. Furthermore, I have tried with several ofp files like for example the following file from realmefirmware.com, which seems to be the last released full version of Realme UI 2.0 (I have tried also with Realme UI 1.0 versions):
RMX2086GDPR_11_C.11_2022011318270168.zip (I decrypt the ofp file inside to extract the .img files.).
Interestingly, I can flash TWRP Recovery (it works, and you see the screen with normal TWRP recovery) and from the recovery I can flash a Custom Recovery like PixelPlusUI. The phone boots (no logo visible) in CustomROM normally, but after a while of use the screen turns off but working ROM.
What should I do? Although I have some flashing experience, I'm pretty much stuck. Can anyone give me any suggestions?
Sorry with making it so long, but I wanted to explain this as best as possible so it is well understood.
When you already upgrades to Android 11, you can not flash custom rom, otherwise it bricks, because all the custom roms required android 10 ROM system, you may downgrade using flash tool (I tried but failed to flash any stock rom using any tool, only able to flash using fastboot commands)
bernarbernuli said:
Hi, I have a semibrick on my X3 Superzoom (Global), and I can't seem to restore the original firmware. When it was working properly, I think the phone was updated to the latest version available in Europe (RMX2081EU_11.A.50), hence Realme UI 1.0.
I do not remember very well what I did, it's been a few weeks since my "screw up", I must have flashed an untrusted firmware, the thing is that when rebooting the screen looks black and goes into a continuous bootloop, but allows to enter fastboot mode with power + Vol down (I know because I can launch fastboot commands). Curiously, when it goes into bootloop you don't see the Realme logo, I discovered that the logo is there but with the screen illumination at minimum, and you can only glimpse a little if you put it under a lamp. Very strange.
Since it can go into fastboot mode I have tried flashing several firmwares for my phone, RMX2086 and none of them repair brik. I have tried always by command line because with MsmDownloadTool I don't have login access and with Realme Flash Tool always shows error "cannot find central directory", I have tried also with QFil and I can't get it to stay stable on the port.
I flash with command line with "fastboot flash" all .img files of super, recovery, boot, boot, dtbo, vbmeta (in that order) but it does nothing. Furthermore, I have tried with several ofp files like for example the following file from realmefirmware.com, which seems to be the last released full version of Realme UI 2.0 (I have tried also with Realme UI 1.0 versions):
RMX2086GDPR_11_C.11_2022011318270168.zip (I decrypt the ofp file inside to extract the .img files.).
Interestingly, I can flash TWRP Recovery (it works, and you see the screen with normal TWRP recovery) and from the recovery I can flash a Custom Recovery like PixelPlusUI. The phone boots (no logo visible) in CustomROM normally, but after a while of use the screen turns off but working ROM.
What should I do? Although I have some flashing experience, I'm pretty much stuck. Can anyone give me any suggestions?
Sorry with making it so long, but I wanted to explain this as best as possible so it is well understood.
Click to expand...
Click to collapse
Have you found solution? I have exactly the same problem!
maskalicz said:
Have you found solution? I have exactly the same problem!
Click to expand...
Click to collapse
It's been over a year since it happened, I didn't find a solution on my own, and since it was still under warranty, I sent it to the official technical service and a couple of weeks later I received it back with the firmware working.