Hi, i tried to flash CyanogenMod 14.1 official latest nightly (yes i flashed firmware and gapps), but i think something i did something wrong and i bricked my device, because now i can't even turn it on, when i try to do it it doesn't happen anything, just black screen and red led, it just shows for a frame the MI logo, then it turns off.
What can i do?
fvnkh said:
Hi, i tried to flash CyanogenMod 14.1 official latest nightly (yes i flashed firmware and gapps), but i think something i did something wrong and i bricked my device, because now i can't even turn it on, when i try to do it it doesn't happen anything, just black screen and red led, it just shows for a frame the MI logo, then it turns off.
What can i do?
Click to expand...
Click to collapse
Your bootloader is locked. Unlock it by miunlock tool.
Sent from my Redmi Note 3 using XDA Free mobile app
pratikmore said:
Your bootloader is locked. Unlock it by miunlock tool.
Sent from my Redmi Note 3 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks, i will try it, but with MIUnlock Tool i need to request the unlock of my device on the website right?
Yes, so how you flash cm14.1? Without unlock trick? Flash fastboot rom via edl method but your internal storage will wipe and you lose your data.
Sent from my Redmi Note 3 using XDA Free mobile app
http://en.miui.com/thread-235865-1-1.html
This is an unbrick tutorial if you need it.It's very reliable, and I think it should work for you.
If it doesn't, try searching for tutorials for a deep flash cable. kinda like the usb jig for samsung devices.
Force edl with fix in miui forum then flash miui fastboot rom. Unlock start again.
I have his same problem, but i unlocked with Mi Unlock Tool, any clues about that?
I had a similar issue couple days ago when flashing another MIUI rom. The phone wouldn't turn on or enter fastboot mode. When I plug into the computer, it would detect something is plugged in with that windows sound and the phone's LED light flashes RED. At this state, I think phone is in EDL mode but MiFlash doesn't detect anything. When I check my Device Manager, the COM Port would show my device as Qualcomm HS-USB Diagnostics 900E.
If you're getting Qualcomm HS-USB Diagnostics 900E in Device Manager, you are in Diagnostics mode, basically a brick. You can try following this link (http) en.miui. com/thread-274589-1-1.html to fix it.
I unbricked my device, I flashed miui 7.1.8.0 fastboot rom, unlocked the bootloader and then i flash cm 14.1 without any problem.
Thank you guys.
Hello guys, I'm new around here.
This happened the day before yesterday, I had RRemix 6.1 installed on my phone, all of a sudden, mid use, most of the apps stopped responding and nothing was working, so I shut the phone down. Then when I tried to turn on the phone, it wouldn't get past the RRemix loading screen. I waited for a while, then I tried getting into TWRP recovery. In that, the TWRP logo would come then it would suddenly switch to loading the RRemix.
As the RRemix wouldn't open up, I tried flashing MIUI10 global beta through the fastboot method using MiFlash Tool, the flash wouldn't complete so I flashed it manually using fastboot commands through CMD. Then the phone just switched off completely, the display doesn't show a single thing. After a while, randomly, while it was connected to my PC, the red LED started blinking and in Device Manager the device was detected as "Qualcomm HS-USB QDLoader 9008". I searched around and found that this was supposed to be EDL mode.
So, I fired up MiFlash Tool again and tried flashing MIUI10 Global Beta onto it, it returned a message that the flash was successful. The phone is supposed to automatically boot up after the flash according to Xiaomi, but my phone didn't. Now what can I do ? I tried flashing the MIUI9 Stable release too, but even that didn't work.
Thanks a lot.
thereelaman said:
Hello guys, I'm new around here.
This happened the day before yesterday, I had RRemix 6.1 installed on my phone, all of a sudden, mid use, most of the apps stopped responding and nothing was working, so I shut the phone down. Then when I tried to turn on the phone, it wouldn't get past the RRemix loading screen. I waited for a while, then I tried getting into TWRP recovery. In that, the TWRP logo would come then it would suddenly switch to loading the RRemix.
As the RRemix wouldn't open up, I tried flashing MIUI10 global beta through the fastboot method using MiFlash Tool, the flash wouldn't complete so I flashed it manually using fastboot commands through CMD. Then the phone just switched off completely, the display doesn't show a single thing. After a while, randomly, while it was connected to my PC, the red LED started blinking and in Device Manager the device was detected as "Qualcomm HS-USB QDLoader 9008". I searched around and found that this was supposed to be EDL mode.
So, I fired up MiFlash Tool again and tried flashing MIUI10 Global Beta onto it, it returned a message that the flash was successful. The phone is supposed to automatically boot up after the flash according to Xiaomi, but my phone didn't. Now what can I do ? I tried flashing the MIUI9 Stable release too, but even that didn't work.
Thanks a lot.
Click to expand...
Click to collapse
Buy a new one or wait till miui 10 release
yohen_auroville said:
Buy a new one or wait till miui 10 release
Click to expand...
Click to collapse
i.e. I should buy a new phone ?
thereelaman said:
Hello guys, I'm new around here.
This happened the day before yesterday, I had RRemix 6.1 installed on my phone, all of a sudden, mid use, most of the apps stopped responding and nothing was working, so I shut the phone down. Then when I tried to turn on the phone, it wouldn't get past the RRemix loading screen. I waited for a while, then I tried getting into TWRP recovery. In that, the TWRP logo would come then it would suddenly switch to loading the RRemix.
As the RRemix wouldn't open up, I tried flashing MIUI10 global beta through the fastboot method using MiFlash Tool, the flash wouldn't complete so I flashed it manually using fastboot commands through CMD. Then the phone just switched off completely, the display doesn't show a single thing. After a while, randomly, while it was connected to my PC, the red LED started blinking and in Device Manager the device was detected as "Qualcomm HS-USB QDLoader 9008". I searched around and found that this was supposed to be EDL mode.
So, I fired up MiFlash Tool again and tried flashing MIUI10 Global Beta onto it, it returned a message that the flash was successful. The phone is supposed to automatically boot up after the flash according to Xiaomi, but my phone didn't. Now what can I do ? I tried flashing the MIUI9 Stable release too, but even that didn't work.
Thanks a lot.
Click to expand...
Click to collapse
Try flash an older stable rom from miui and hope one boots so u can use phone or flash again to another rom. Download a few different ROMs try them all maybe one is bound to boot up
Test point Only then you can recover your phone.
Gabitozero said:
Test point Only then you can recover your phone.
Click to expand...
Click to collapse
I don't exactly understand what you mean, if I got it into EDL, what's the point of Test Point method, and I don't really understand what the Test point method does.
It will be real helpful of you to explain that to me..
Thanks.
Test point are two point in the mother board.
If you communicate the two points with a wire the phone enters in bootloader mode and you can flash the rom again.
(google test point redmi note 4 and you will get a full imaged guide)
Only for snapdragon version.
I did it succesfully one year ago.
magnus48 said:
Test point are two point in the mother board.
If you communicate the two points with a wire the phone enters in bootloader mode and you can flash the rom again.
(google test point redmi note 4 and you will get a full imaged guide)
Only for snapdragon version.
I did it succesfully one year ago.
Click to expand...
Click to collapse
I did try that, but my phone already shows up as the "Qualcomm HS-USB QDLoader 9008" so it didn't really make any difference, the flashing was successful and the phone still didn't start.. Is there anything else that I can try ?
Install miui 9 with flashtool and it should be fine,
https://sourceforge.net/projects/firmware-global-mido/
Tell me if it worked :good:
BK said:
Install miui 9 with flashtool and it should be fine,
https://sourceforge.net/projects/firmware-global-mido/
Tell me if it worked :good:
Click to expand...
Click to collapse
When I downloaded that, WinRar showed a message that the file was corrupt.
And how do I flash this Firmware using Mi Flash Tool?
Thanks.
Try
Did you try to flesh recovery through ADB?
Alfonso13 said:
Did you try to flesh recovery through ADB?
Click to expand...
Click to collapse
My ADB was turned off, and my device won't turn on, how am I supposed to try that?
Thanks..
Do you try this?
https://forum.xda-developers.com/redmi-note-4/how-to/guide-how-to-edl-flashing-redmi-note-4-t3795831
Alfonso13 said:
https://forum.xda-developers.com/redmi-note-4/how-to/guide-how-to-edl-flashing-redmi-note-4-t3795831
Click to expand...
Click to collapse
That method only works if I could access fastboot, sadly I can't..
same issue i got some days before i removed the back case and remove the battery connection and flashed miui 10 beta without battery connect from mi flash tool i got my same issue but the benefit is fastboot file is recovered after that i flashed orange fox r7 then format all data then install miui10 from orange fox after that phone is booted successfully but persist issue is there (cant receive calls, notification bar not available) but after that i download the miui10 from miui updater (setting-About Phone-System Update-Download Updates) after download the rom flashed from updater reboot the device and success! try this method may be it will works for you also
wont turn on
hey, did u resolve ur problem here? i have redmi 4 prime and stuck in edl mode now.
and samae as your problem here, always success but my phone wont to turn on again, i try every solution in this forum and other. the result still same til now, 3 days already and still same. please help me, before my mom kill me cause this phone wont turn on.
sorry for bad english
hi everyone, so i am having an issue with my xiaomi mi a1. I rooted the device in order to install the pixel 3 g-cam, yesterday i tried to unroote it and to lock its bootloader but as i was doing this, the system was destroyed. i flashed the device and got it working, the my GF tried unrooting it from magisk app and i dont kow what happened it appeared th co command symbol. I flashed it again and everything was normal util the mi screen appeared and then the android one logo show. the next thing that happended was the advise of corruption, the mi screen and android logo. again and again so on so forth. i've flashed the device, several times and nothing changes. i've locked and unlocked the bootloader, and nothing. I even tried stock recovery options but resuts in the same. what esle can I
do ?
I may be late but something like this happened to me as well.
I got my phone bricked and because I was in school the phone was stuck on booting screen for a long time. When I got back the phone's battery was dead. I put it on the charger and it wasn't doing anything, all of a sudden it starts to blink red light (sign it's in edl mode) I don't quite remember if I got into the fastboot and then flashed miui 9 beta with a pc through the miui application idk what it's called and after the installation was over it worked. It could be a problem with not being in the right mode (as I said previously it's either edl or fastboot) or it could be because of a problem with that miui version
Maybe Anti-Roll back problem?
PLEASE HELP
My redmi note 5 (vince) was earlier on havoc os rom . Then i decided to install miui again through fastboot. I started installing using fastboot method but it said mismatching of image and device ....so i searched for this issue on xda
Someone already suggested to omit two lines that included“getvar” and try flashing again. I did the same. It flashed but didn't rebooted. Not even started. I took it to service center ....they opened it and when they came back with the phone....it was showing it's mi logo and was not going further..
So for now my phone is showing mi logo and is not going further ...please suggest something.
Flash using xiaomi flasher
Just download latest fastboot Rom for your device
and keep in your pc..then install xiaomi flasher tool in pc
Then connect your phone to pc via usb in fastboot mode and flash then given rom ...thats it...
anantrishabh said:
Just download latest fastboot Rom for your device
and keep in your pc..then install xiaomi flasher tool in pc
Then connect your phone to pc via usb in fastboot mode and flash then given rom ...thats it...
Click to expand...
Click to collapse
It isn't working brother, already tried
Is there any other method
If still it stuck on mi logo ( after flashing with the correct fastboot rom using xiaomi flasher) or you may also try another custom rom if doesn't work,then this may be a fault of screen ,you needs to contact service center again for this issue...
No issue of screen
Anyways thanks for giving time .?
tarund1 said:
PLEASE HELP
My redmi note 5 (vince) was earlier on havoc os rom . Then i decided to install miui again through fastboot. I started installing using fastboot method but it said mismatching of image and device ....so i searched for this issue on xda
Someone already suggested to omit two lines that included“getvar” and try flashing again. I did the same. It flashed but didn't rebooted. Not even started. I took it to service center ....they opened it and when they came back with the phone....it was showing it's mi logo and was not going further..
So for now my phone is showing mi logo and is not going further ...please suggest something.
Click to expand...
Click to collapse
Can you get in the recovery?
marios239 said:
Can you get in the recovery?
Click to expand...
Click to collapse
No...phone enters only in fastboot mode...nothing else
Same issue here.. Stock in mi logo, no recovery, only fastboot... But can't flash fastboot rom it always error, in edl mo, cant read hello packet... Please help us.
good morning, my xiaomi redmi note 7 lew I did bootloader unlock and install the recovery "twrp", install a custom rom viperos, after it restarted it stayed in the redmi logo, I tried to install other rom via recovey and it doesn't recognize me zip, I managed install the crDroid but it stays in the startup logo, I tried to flash with xiaomi miflash tool and I get the error of flash anti-pass error and I can't get my RN7 back to life, who can help me thank you from now on.
Thank you
hi i have same problem. please help me. my phone is struck in booting