Screen stuck at MI logo screen - Xiaomi Redmi Note 5 / 5 Plus Questions & Answers

PLEASE HELP
My redmi note 5 (vince) was earlier on havoc os rom . Then i decided to install miui again through fastboot. I started installing using fastboot method but it said mismatching of image and device ....so i searched for this issue on xda
Someone already suggested to omit two lines that included“getvar” and try flashing again. I did the same. It flashed but didn't rebooted. Not even started. I took it to service center ....they opened it and when they came back with the phone....it was showing it's mi logo and was not going further..
So for now my phone is showing mi logo and is not going further ...please suggest something.

Flash using xiaomi flasher
Just download latest fastboot Rom for your device
and keep in your pc..then install xiaomi flasher tool in pc
Then connect your phone to pc via usb in fastboot mode and flash then given rom ...thats it...

anantrishabh said:
Just download latest fastboot Rom for your device
and keep in your pc..then install xiaomi flasher tool in pc
Then connect your phone to pc via usb in fastboot mode and flash then given rom ...thats it...
Click to expand...
Click to collapse
It isn't working brother, already tried
Is there any other method

If still it stuck on mi logo ( after flashing with the correct fastboot rom using xiaomi flasher) or you may also try another custom rom if doesn't work,then this may be a fault of screen ,you needs to contact service center again for this issue...

No issue of screen
Anyways thanks for giving time .?

tarund1 said:
PLEASE HELP
My redmi note 5 (vince) was earlier on havoc os rom . Then i decided to install miui again through fastboot. I started installing using fastboot method but it said mismatching of image and device ....so i searched for this issue on xda
Someone already suggested to omit two lines that included“getvar” and try flashing again. I did the same. It flashed but didn't rebooted. Not even started. I took it to service center ....they opened it and when they came back with the phone....it was showing it's mi logo and was not going further..
So for now my phone is showing mi logo and is not going further ...please suggest something.
Click to expand...
Click to collapse
Can you get in the recovery?

marios239 said:
Can you get in the recovery?
Click to expand...
Click to collapse
No...phone enters only in fastboot mode...nothing else

Same issue here.. Stock in mi logo, no recovery, only fastboot... But can't flash fastboot rom it always error, in edl mo, cant read hello packet... Please help us.

Related

Device is shutting down after mi logo

Hi all I'm new to this forum. I'm using a Xiaomi Redmi Note 3(SD) for about two years. I had rooted the device by official method and was using Lineage OS 14.1 almost 1.5 years . Yesterday I went through a xda thread which saying miui rom for rooted Redmi Note 3. I flashed that ROM and after that my device is not staring. When I'm powering the device it is vibrating and showing mi logo and then turning off. I'm not able to go to TWRP by volume up and power key as it is shutting down after switch on. But I'm able to go fastboot mode by volume down and power key combo. And also the notification led is blinking red when I'm charging the device. I've tried to flash TWRP recovery via fastboot but it's saying "failed remote device is locked" Tried to flash miui fastboot ROM via Miflash tool but it also failing with same remote device locked statement.
Now my question is that does my device got bricked? Will I be able to bring it back to working state? Anyone please help :crying:
linuxuser02 said:
Hi all I'm new to this forum. I'm using a Xiaomi Redmi Note 3(SD) for about two years. I had rooted the device by official method and was using Lineage OS 14.1 almost 1.5 years . Yesterday I went through a xda thread which saying miui rom for rooted Redmi Note 3. I flashed that ROM and after that my device is not staring. When I'm powering the device it is vibrating and showing mi logo and then turning off. I'm not able to go to TWRP by volume up and power key as it is shutting down after switch on. But I'm able to go fastboot mode by volume down and power key combo. And also the notification led is blinking red when I'm charging the device. I've tried to flash TWRP recovery via fastboot but it's saying "failed remote device is locked" Tried to flash miui fastboot ROM via Miflash tool but it also failing with same remote device locked statement.
Now my question is that does my device got bricked? Will I be able to bring it back to working state? Anyone please help :crying:
Click to expand...
Click to collapse
Your device's bootloader got locked as a result of flashing MIUI. Just unlock it again using official Mi Unlock tool and flash TWRP.
jayaram95 said:
Your device's bootloader got locked as a result of flashing MIUI. Just unlock it again using official Mi Unlock tool and flash TWRP.
Click to expand...
Click to collapse
Thanks for replying. But when I'm trying to flashing using MIflash tool it's saying remote device locked. And MI tool is also not recognising the device as USB debugging is not turned on. What to do next?
linuxuser02 said:
Thanks for replying. But when I'm trying to flashing using MIflash tool it's saying remote device locked. And MI tool is also not recognising the device as USB debugging is not turned on. What to do next?
Click to expand...
Click to collapse
Miflash won't work with fastboot mode if your device's bootloader is locked. You'll have to go to EDL mode and then flash using Miflash.
jayaram95 said:
Miflash won't work with fastboot mode if your device's bootloader is locked. You'll have to go to EDL mode and then flash using Miflash.
Click to expand...
Click to collapse
Thanks man. It worked like charm. But still I can't understand how this device got locked even after flashing a pre-rooted ROM with lazy flasher. Anyway thank you again :good:
linuxuser02 said:
Thanks man. It worked like charm. But still I can't understand how this device got locked even after flashing a pre-rooted ROM with lazy flasher. Anyway thank you again :good:
Click to expand...
Click to collapse
Sometimes the emmc.appsboot file in MIUI ROMs messes up this way. I always remove that file from the ROM zip before flashing just to be on the safer side, while flashing MIUI ROMs through TWRP. And, always make sure USB debugging is turned ON, as it helps during such situations.
any solution to this? mine shut off after showing mi.com logo.. flashing in edl mode with official rom still the same.. please help
Oreol said:
any solution to this? mine shut off after showing mi.com logo.. flashing in edl mode with official rom still the same.. please help
Click to expand...
Click to collapse
i have same problem , did you fix i?
linuxuser02 said:
Thanks man. It worked like charm. But still I can't understand how this device got locked even after flashing a pre-rooted ROM with lazy flasher. Anyway thank you again :good:
Click to expand...
Click to collapse
What is EDL mode. how to flash using edl mode ?
jayaram95 said:
Miflash won't work with fastboot mode if your device's bootloader is locked. You'll have to go to EDL mode and then flash using Miflash.
Click to expand...
Click to collapse
What is EDL mode ?
how to flash using edl mode ?

Bootloop again and again after flashing RN5 via edl mode or test point method.

After updating my redmi note 5 it works normal for one day and after that i restart my phone and it turns to bootloop .It start shows mi logo and then again starts .The whole continuous till battery is dead
My phone bootloader is locked so try to install twrp via unofficial method that is replacing original recovery.img to twrp(renaming it to recovery.img).But nothing happens after flashing when i go to recovery mode the whole screen truns balck and phone connected to pc via 900E port.
I am trying to recover it but nothing happens
This problem happens in past but i recover it because in that time twrp is install and the only thing is to mount some partition(not in memory which partition).
but this time no twrp plz help plz....
thanks in advance.
If you can get into Fastboot download fastboot Rom for your model and install with MiFlash.
Sent from my Nokia 7 plus using Tapatalk
Stransky said:
If you can get into Fastboot download fastboot Rom for your model and install with MiFlash.
Sent from my Nokia 7 plus using Tapatalk
Click to expand...
Click to collapse
I get in fastboot mode but my phone bootloader is locked . I have flash my phone via test point method to its base ver rom but problem exist till now:crying:.
Anyone plz give the way to install twrp on this bricked phone and after that i can handel it.

Phone bricked and stuck in EDL, won't start after successful flash in MiFlash Tool.

Hello guys, I'm new around here.
This happened the day before yesterday, I had RRemix 6.1 installed on my phone, all of a sudden, mid use, most of the apps stopped responding and nothing was working, so I shut the phone down. Then when I tried to turn on the phone, it wouldn't get past the RRemix loading screen. I waited for a while, then I tried getting into TWRP recovery. In that, the TWRP logo would come then it would suddenly switch to loading the RRemix.
As the RRemix wouldn't open up, I tried flashing MIUI10 global beta through the fastboot method using MiFlash Tool, the flash wouldn't complete so I flashed it manually using fastboot commands through CMD. Then the phone just switched off completely, the display doesn't show a single thing. After a while, randomly, while it was connected to my PC, the red LED started blinking and in Device Manager the device was detected as "Qualcomm HS-USB QDLoader 9008". I searched around and found that this was supposed to be EDL mode.
So, I fired up MiFlash Tool again and tried flashing MIUI10 Global Beta onto it, it returned a message that the flash was successful. The phone is supposed to automatically boot up after the flash according to Xiaomi, but my phone didn't. Now what can I do ? I tried flashing the MIUI9 Stable release too, but even that didn't work.
Thanks a lot.
thereelaman said:
Hello guys, I'm new around here.
This happened the day before yesterday, I had RRemix 6.1 installed on my phone, all of a sudden, mid use, most of the apps stopped responding and nothing was working, so I shut the phone down. Then when I tried to turn on the phone, it wouldn't get past the RRemix loading screen. I waited for a while, then I tried getting into TWRP recovery. In that, the TWRP logo would come then it would suddenly switch to loading the RRemix.
As the RRemix wouldn't open up, I tried flashing MIUI10 global beta through the fastboot method using MiFlash Tool, the flash wouldn't complete so I flashed it manually using fastboot commands through CMD. Then the phone just switched off completely, the display doesn't show a single thing. After a while, randomly, while it was connected to my PC, the red LED started blinking and in Device Manager the device was detected as "Qualcomm HS-USB QDLoader 9008". I searched around and found that this was supposed to be EDL mode.
So, I fired up MiFlash Tool again and tried flashing MIUI10 Global Beta onto it, it returned a message that the flash was successful. The phone is supposed to automatically boot up after the flash according to Xiaomi, but my phone didn't. Now what can I do ? I tried flashing the MIUI9 Stable release too, but even that didn't work.
Thanks a lot.
Click to expand...
Click to collapse
Buy a new one or wait till miui 10 release
yohen_auroville said:
Buy a new one or wait till miui 10 release
Click to expand...
Click to collapse
i.e. I should buy a new phone ?
thereelaman said:
Hello guys, I'm new around here.
This happened the day before yesterday, I had RRemix 6.1 installed on my phone, all of a sudden, mid use, most of the apps stopped responding and nothing was working, so I shut the phone down. Then when I tried to turn on the phone, it wouldn't get past the RRemix loading screen. I waited for a while, then I tried getting into TWRP recovery. In that, the TWRP logo would come then it would suddenly switch to loading the RRemix.
As the RRemix wouldn't open up, I tried flashing MIUI10 global beta through the fastboot method using MiFlash Tool, the flash wouldn't complete so I flashed it manually using fastboot commands through CMD. Then the phone just switched off completely, the display doesn't show a single thing. After a while, randomly, while it was connected to my PC, the red LED started blinking and in Device Manager the device was detected as "Qualcomm HS-USB QDLoader 9008". I searched around and found that this was supposed to be EDL mode.
So, I fired up MiFlash Tool again and tried flashing MIUI10 Global Beta onto it, it returned a message that the flash was successful. The phone is supposed to automatically boot up after the flash according to Xiaomi, but my phone didn't. Now what can I do ? I tried flashing the MIUI9 Stable release too, but even that didn't work.
Thanks a lot.
Click to expand...
Click to collapse
Try flash an older stable rom from miui and hope one boots so u can use phone or flash again to another rom. Download a few different ROMs try them all maybe one is bound to boot up
Test point Only then you can recover your phone.
Gabitozero said:
Test point Only then you can recover your phone.
Click to expand...
Click to collapse
I don't exactly understand what you mean, if I got it into EDL, what's the point of Test Point method, and I don't really understand what the Test point method does.
It will be real helpful of you to explain that to me..
Thanks.
Test point are two point in the mother board.
If you communicate the two points with a wire the phone enters in bootloader mode and you can flash the rom again.
(google test point redmi note 4 and you will get a full imaged guide)
Only for snapdragon version.
I did it succesfully one year ago.
magnus48 said:
Test point are two point in the mother board.
If you communicate the two points with a wire the phone enters in bootloader mode and you can flash the rom again.
(google test point redmi note 4 and you will get a full imaged guide)
Only for snapdragon version.
I did it succesfully one year ago.
Click to expand...
Click to collapse
I did try that, but my phone already shows up as the "Qualcomm HS-USB QDLoader 9008" so it didn't really make any difference, the flashing was successful and the phone still didn't start.. Is there anything else that I can try ?
Install miui 9 with flashtool and it should be fine,
https://sourceforge.net/projects/firmware-global-mido/
Tell me if it worked :good:
BK said:
Install miui 9 with flashtool and it should be fine,
https://sourceforge.net/projects/firmware-global-mido/
Tell me if it worked :good:
Click to expand...
Click to collapse
When I downloaded that, WinRar showed a message that the file was corrupt.
And how do I flash this Firmware using Mi Flash Tool?
Thanks.
Try
Did you try to flesh recovery through ADB?
Alfonso13 said:
Did you try to flesh recovery through ADB?
Click to expand...
Click to collapse
My ADB was turned off, and my device won't turn on, how am I supposed to try that?
Thanks..
Do you try this?
https://forum.xda-developers.com/redmi-note-4/how-to/guide-how-to-edl-flashing-redmi-note-4-t3795831
Alfonso13 said:
https://forum.xda-developers.com/redmi-note-4/how-to/guide-how-to-edl-flashing-redmi-note-4-t3795831
Click to expand...
Click to collapse
That method only works if I could access fastboot, sadly I can't..
same issue i got some days before i removed the back case and remove the battery connection and flashed miui 10 beta without battery connect from mi flash tool i got my same issue but the benefit is fastboot file is recovered after that i flashed orange fox r7 then format all data then install miui10 from orange fox after that phone is booted successfully but persist issue is there (cant receive calls, notification bar not available) but after that i download the miui10 from miui updater (setting-About Phone-System Update-Download Updates) after download the rom flashed from updater reboot the device and success! try this method may be it will works for you also
wont turn on
hey, did u resolve ur problem here? i have redmi 4 prime and stuck in edl mode now.
and samae as your problem here, always success but my phone wont to turn on again, i try every solution in this forum and other. the result still same til now, 3 days already and still same. please help me, before my mom kill me cause this phone wont turn on.
sorry for bad english
hi everyone, so i am having an issue with my xiaomi mi a1. I rooted the device in order to install the pixel 3 g-cam, yesterday i tried to unroote it and to lock its bootloader but as i was doing this, the system was destroyed. i flashed the device and got it working, the my GF tried unrooting it from magisk app and i dont kow what happened it appeared th co command symbol. I flashed it again and everything was normal util the mi screen appeared and then the android one logo show. the next thing that happended was the advise of corruption, the mi screen and android logo. again and again so on so forth. i've flashed the device, several times and nothing changes. i've locked and unlocked the bootloader, and nothing. I even tried stock recovery options but resuts in the same. what esle can I
do ?
I may be late but something like this happened to me as well.
I got my phone bricked and because I was in school the phone was stuck on booting screen for a long time. When I got back the phone's battery was dead. I put it on the charger and it wasn't doing anything, all of a sudden it starts to blink red light (sign it's in edl mode) I don't quite remember if I got into the fastboot and then flashed miui 9 beta with a pc through the miui application idk what it's called and after the installation was over it worked. It could be a problem with not being in the right mode (as I said previously it's either edl or fastboot) or it could be because of a problem with that miui version
Maybe Anti-Roll back problem?

Help please.

Hello to all ,
I need help for my phone.. I'm using Xiaomi Redmi note 5 .
The story is I already unlock the bootloader , install pixel experience rom in it, and used for months now. But something happen with the update cuz of the error 7 thing on the twrp
So I try to find a solution and find how to fix it by using some tools that you edit and delete the "assert" thing which they call it.
BUT.. that thing won't change anything but yes it fix the error 7 on twrp and you can flash the update rom but once you reboot it stuck on mi logo.
I try everything and my phone end up on the logo .
So , I try to used the fastboot thing and what happen is..
After I try the method "fastboot' and miflashtool , my phone how do I said this.?? It's becoming unnatural.
It goes on .. but the bootloader is lock . Buuttt my phone is still on the custom rom which the latest update of the pixel firmware. My twrp is gone too.
But still I can use my phone like usual.
Can anybody tell me what happen and is it possible to flash to global rom and get back to miui ?
And is it possible to unlock bootloader again ?
Are you on miui or pixel experience?
how is your phone on custom rom when you flashed miui through miflash tool?
Sir Try Mi-flash-unlock to unlock your phone.Boot your phone into Fastboot and try to unclock it.Then You need to download Redmi 5 plus MIUI 10.2.1 fastboot (.tgz) file.Extract that file in Pc. Download Mi flash tool and install in pc.Place the extracted file in desktop.Open that file and copy that location (it's like Desktop/user/....) then boot your phone into Fastboot then connect your phone into pc.Then refresh in MI flash tool.It will show device like (056873).Then see the bottom right of the MI flash tool choose Clear all.Then click flash button.wait for some time.Finally it will show completed or some error do not panic .wait for some time your phone will boot and finally go to the system

Mi A3 stuck with EDL mode when flashing the Pixel experience

i try to flash pixel experience, the developer guide to flash firmware+vender zip after flashing the ROM zip, as per the guide I flash the ROM ZIP and firmware zip, after flashing the firmware, mobile rebooted and nothing to show in display. so i try to force boot in to recovery. the screen nothing to show. so i try to boot on fastboot. still nothing to show in mobile screen even the fastboot logo. i connect my mobile to computer, and i noticed the HS-USB QDLoader 9008 driver was installed. so guess it was in EDL mode, then try to flash the stock ROM using MI flash tool And get the error " cannot receive hello pocket." "object reference not set to an instance of an object " so i try to flash using QFIL , still not get any improvement, so kindly guide any possible to unbrick my phone.
Hey there I'm kinda having the same problem, any progress on your end ? I waited a few days for the battery to die and then connected to MiFlash but it keeps asking for an EDL authorized account, which is apparently a rarity. Exploring other options such as bypassing EDL authorization, long shot but what could be worse eh ...
freeze1994 said:
Exploring other options such as bypassing EDL authorization, long shot but what could be worse eh ...
Click to expand...
Click to collapse
Could you solve the problem? I have the same problem. Did you find information or a method to bypass EDL authentication?
Anandkrish40 said:
i try to flash pixel experience, the developer guide to flash firmware+vender zip after flashing the ROM zip, as per the guide I flash the ROM ZIP and firmware zip, after flashing the firmware, mobile rebooted and nothing to show in display. so i try to force boot in to recovery. the screen nothing to show. so i try to boot on fastboot. still nothing to show in mobile screen even the fastboot logo. i connect my mobile to computer, and i noticed the HS-USB QDLoader 9008 driver was installed. so guess it was in EDL mode, then try to flash the stock ROM using MI flash tool And get the error " cannot receive hello pocket." "object reference not set to an instance of an object " so i try to flash using QFIL , still not get any improvement, so kindly guide any possible to unbrick my phone.
Click to expand...
Click to collapse
got any solution? same thing happened to me too, help please
help I have the same error, any solution?
Syden! said:
help I have the same error, any solution?
Click to expand...
Click to collapse
What version of mi flash are you using? If it is the one from 2017 then it will not work as it isn't compatible with EDL.
Update miflash to latest or at least 2018 version to use EDL mode

Categories

Resources