i try to flash pixel experience, the developer guide to flash firmware+vender zip after flashing the ROM zip, as per the guide I flash the ROM ZIP and firmware zip, after flashing the firmware, mobile rebooted and nothing to show in display. so i try to force boot in to recovery. the screen nothing to show. so i try to boot on fastboot. still nothing to show in mobile screen even the fastboot logo. i connect my mobile to computer, and i noticed the HS-USB QDLoader 9008 driver was installed. so guess it was in EDL mode, then try to flash the stock ROM using MI flash tool And get the error " cannot receive hello pocket." "object reference not set to an instance of an object " so i try to flash using QFIL , still not get any improvement, so kindly guide any possible to unbrick my phone.
Hey there I'm kinda having the same problem, any progress on your end ? I waited a few days for the battery to die and then connected to MiFlash but it keeps asking for an EDL authorized account, which is apparently a rarity. Exploring other options such as bypassing EDL authorization, long shot but what could be worse eh ...
freeze1994 said:
Exploring other options such as bypassing EDL authorization, long shot but what could be worse eh ...
Click to expand...
Click to collapse
Could you solve the problem? I have the same problem. Did you find information or a method to bypass EDL authentication?
Anandkrish40 said:
i try to flash pixel experience, the developer guide to flash firmware+vender zip after flashing the ROM zip, as per the guide I flash the ROM ZIP and firmware zip, after flashing the firmware, mobile rebooted and nothing to show in display. so i try to force boot in to recovery. the screen nothing to show. so i try to boot on fastboot. still nothing to show in mobile screen even the fastboot logo. i connect my mobile to computer, and i noticed the HS-USB QDLoader 9008 driver was installed. so guess it was in EDL mode, then try to flash the stock ROM using MI flash tool And get the error " cannot receive hello pocket." "object reference not set to an instance of an object " so i try to flash using QFIL , still not get any improvement, so kindly guide any possible to unbrick my phone.
Click to expand...
Click to collapse
got any solution? same thing happened to me too, help please
help I have the same error, any solution?
Syden! said:
help I have the same error, any solution?
Click to expand...
Click to collapse
What version of mi flash are you using? If it is the one from 2017 then it will not work as it isn't compatible with EDL.
Update miflash to latest or at least 2018 version to use EDL mode
Related
Hi everyone,
I have Xiaomi Redmi Note 4, and when I using him, hes gone. Nothing work, no fastboot, no twrp, only Red led when i charge battery.
And i want to flash miui global in MiFlash and... I have error PING TARGET VIA FIREHOSE.
Guys please help me, I tried in 6 miui globals, china, any MiFlash version(Beta,2014,2015,2016) and dont work
Have a nice day.
P.S I have Qualcomm HS-USB QDLoader 9008 (COM3)
Try to flash in edl mode... For this you have an authorized mi account
I got same issue some time before just remove the battery connector after that connect the phone with pc (WITHOUT BATTERY CONNECT) flash again using miflash tool
ismail.ahmed84 said:
I got same issue some time before just remove the battery connector after that connect the phone with pc (WITHOUT BATTERY CONNECT) flash again using miflash tool
Click to expand...
Click to collapse
I tried IT and dont work
anil5462 said:
Try to flash in edl mode... For this you have an authorized mi account
Click to expand...
Click to collapse
I flashed on edl and dont work
i experienced same issue before and nobody in XDA cant fix this (or wont bother to reply,, idk)
try test point method. if it doesn't work, i'm afraid that you have broken hardware. you have to replace it
anil5462 said:
Try to flash in edl mode... For this you have an authorized mi account
Click to expand...
Click to collapse
rs168 said:
i experienced same issue before and nobody in XDA cant fix this (or wont bother to reply,, idk)
try test point method. if it doesn't work, i'm afraid that you have broken hardware. you have to replace it
Click to expand...
Click to collapse
I tried testpoint and always have error writing on Device in miflash
Snajper322 said:
I tried testpoint and always have error writing on Device in miflash
Click to expand...
Click to collapse
okay .. too bad you should replace your device, or you can find a good mechanic to replace some broken parts. it usually works
did you drop it?
or it happened during installing rom or something?
How does it happened please tell us.
Charge it overnight
Hold the power button 20-30 seconds the next day
Boot the device in fast boot mode by holding volume down+power button. Then go to MiFlash and flash fastboot redmi note 4 rom in edl mode(Unlock bootloader by running the last script file and then proceed to do the following steps). Download stock fastboot rom for redmi note 4 from official mi website(Note: The stock fastboot rom is different from stock recovery rom). While flashing the rom, below you have the option to choose three modes, click clean all and lock. Flash this rom and you're device will be working in no time. Make sure your device has adequate battery
PLEASE HELP
My redmi note 5 (vince) was earlier on havoc os rom . Then i decided to install miui again through fastboot. I started installing using fastboot method but it said mismatching of image and device ....so i searched for this issue on xda
Someone already suggested to omit two lines that included“getvar” and try flashing again. I did the same. It flashed but didn't rebooted. Not even started. I took it to service center ....they opened it and when they came back with the phone....it was showing it's mi logo and was not going further..
So for now my phone is showing mi logo and is not going further ...please suggest something.
Flash using xiaomi flasher
Just download latest fastboot Rom for your device
and keep in your pc..then install xiaomi flasher tool in pc
Then connect your phone to pc via usb in fastboot mode and flash then given rom ...thats it...
anantrishabh said:
Just download latest fastboot Rom for your device
and keep in your pc..then install xiaomi flasher tool in pc
Then connect your phone to pc via usb in fastboot mode and flash then given rom ...thats it...
Click to expand...
Click to collapse
It isn't working brother, already tried
Is there any other method
If still it stuck on mi logo ( after flashing with the correct fastboot rom using xiaomi flasher) or you may also try another custom rom if doesn't work,then this may be a fault of screen ,you needs to contact service center again for this issue...
No issue of screen
Anyways thanks for giving time .?
tarund1 said:
PLEASE HELP
My redmi note 5 (vince) was earlier on havoc os rom . Then i decided to install miui again through fastboot. I started installing using fastboot method but it said mismatching of image and device ....so i searched for this issue on xda
Someone already suggested to omit two lines that included“getvar” and try flashing again. I did the same. It flashed but didn't rebooted. Not even started. I took it to service center ....they opened it and when they came back with the phone....it was showing it's mi logo and was not going further..
So for now my phone is showing mi logo and is not going further ...please suggest something.
Click to expand...
Click to collapse
Can you get in the recovery?
marios239 said:
Can you get in the recovery?
Click to expand...
Click to collapse
No...phone enters only in fastboot mode...nothing else
Same issue here.. Stock in mi logo, no recovery, only fastboot... But can't flash fastboot rom it always error, in edl mo, cant read hello packet... Please help us.
Success is disgusted by some people, and will not share any files for free in the future.
Your Post Very Helpful For Us ,
I Am Test This File Then Post Result , Thanks For This File Provide !!!
johnny886 said:
In China, this Phone is called Nubia Play, and the Global version is called Redmagic 5G Lite,
but the mobile phone model is NX651J. Generally speaking, the two are only the difference in ROM.
This is the edl firmware of Nubia Play,CN version.which can repair your phone in edl mode.
All the files are from the official package without any modification!
How to do?
1.Open XiaoMiFlash.exe in the MiFlash folder
2.Click the select button to select the images in this firmware
3.The phone enters edl mode and connects to the computer with a usb cable
（If your phone is in edl mode (9008 mode) for a long time, you must long press the
power button volume + and volume-keys to force the phone to power off, and then re-enter edl mode）
4.Click Loading and see the COMxx that appears, indicating that your phone is connected. Then click Flash
5.Then just wait, prompting flash done！sucess! It means that the flashing has been completed,
long press the power button to restart the phone!
When you see the green notification light next to the front camera light up,
you can release the power button.
Good luck！Enjoy it！！！
Download link：
https://mega.nz/file/eNkVSA6T#2yN_JHtOxB_K4NHVTF3qT_asMMFtnEKBQ6sQ8b-y2nU
Click to expand...
Click to collapse
Only spanish?
GSM KING MAKER said:
Your Post Very Helpful For Us ,
I Am Test This File Then Post Result , Thanks For This File Provide !!!
Click to expand...
Click to collapse
Is global rom? Only spanish?
thequellu said:
Is global rom? Only spanish?
Click to expand...
Click to collapse
Its Not Global Rom , Only Chinese Firmware !
Why do I use scarlet letter when I use flash
The brick tool has worked on a few occasions ,thank you for that but now I need more help or suggestions, when playing between the Spain ROM and China version I lost the baseband and IMEI.Then I thought,locking the bootloader back would help obviously it did not work. Now even though I flashed the unbrick tool though miflasher edl mode I am stuck with a blank screen after the Nubia logo and port Qualcomm 900e in Windows device manager.
Tried already via recovery to flash an update China version or Spain version they flashed fine however still same scenario after Nubia logo.
Not sure what my options are.
Does this work for updating or just brick?
DargorDG said:
Does this work for updating or just brick?
Click to expand...
Click to collapse
It does work to fix the update errors and then use the OTA or USB Otg method
@johnny886
Thank you for the tool.Just wondering if there is a version for Android 11 as i updated to 3.16 android 11 firmware via the usb and now I get your device is corrupt.
Obviously my problem dates back to unlocking and then relocking the bootloader which somehow bricked the phone. Even though before relocking the tool worked once the bootloader was locked the phone wasn't able to boot into system but I was not getting the device is corrupt.
I am hoping for a way to unlock the bootloader or to be able to get back into the system to tick the option in the developer settings hence I am keeping my hope for an updated unbrick tool.
I donwload the file and uncompress it, when select the folder with XiaoMiFlash is shows "could't find flash script".
There are no flash_all.bat file on folder
any help, where is that file?
(mega interrupt the download process)
@ecatombe1234
In my case said the same with regards the script but had flashed fine once started.
Just be careful if you have the bootloader unlocked do not lock it again with the fastboot flash lock.
Thanks for you, really soon, response.
Yes, I try, put phone in edl mode, refresh, flash, and recive [... COM8]:ERROR_UNSUPPORTED_TYPE 0
@ecatombe1234
Usually this is down to the drivers used for Qualcomm Edl mode. Have you installed them ?
Is the EDL mode phone recognized in the device manager as Qualcomm??
Yes, I have correct drivers, I restored the phone last year, but not now.
Xiaomi tool detects phone in bootloader and in edl mode.
Windows detect phone in edl mode as: Qualcomm HS-USB QDLoader 9008 (COM8).
I tried with QFiL too, but I am not sure the config to work qith this, because it detect mobile in edl mode.
Any way, Xiaomi tool has very few config options, I can's understand the "could't find flash script", can any one give us ligth about this error?
It was xiaomi flash tool version, I tried a lot, finally this one works, it is the only one that works with corrupted android 11 version.
Download Xiaomi Flash Tool- v20210226
Mi Flash tool is meant for all Qualcomm powered Xiaomi and Redmi phones on which you can flash MIUI Fastboot ROMs. It works over the Fastboot connection to erase and…
droidfilehost.com
That will work to my dead boot nubia paly 5g?
@ecatombe1234
Thank you for the version even though this version got me a bit further in a Chinese testing menu still couldn't boot into system .
Must be something to do with the relocking of the bootloader.
Helo guys.. How can I downgrade from android 11 back to android 10 on this device? I recently updated my software but It is not stable yet. Certain apps for example PUBG mobile keep crashing whenever I try to launch it.
Mitchpop said:
@ecatombe1234
Thank you for the version even though this version got me a bit further in a Chinese testing menu still couldn't boot into system .
Must be something to do with the relocking of the bootloader.
Click to expand...
Click to collapse
I've been following your discussion on this thread and had the same problem after ota update to 3.16.
I also had initially difficulty flashing with MiFlash but finally it worked.
I immediately pressed the flash after entering EDL mode
My phone flashed and entered the Chinese mode. I then went to bootloader by hard pressing the power button and Vol down key.
In bootloader I entered recovery which allowed me to update using OTG. I used a flash with USB C and loaded the phone with NX651J v 22 and my phone is back to the previous settings.
My Mi A3 was hard bricked and unbricked it using Mi flash tool , again after a few months in got bricked , I unbricked it again but this time I guess I somehow locked the bootloader , Now my device is bricked again , it's not responding not even charging , I set it in edl mode and tried to flash rom using mi flash tool , but this time the mi flash tool is showing me error "write time out , device may be disconnected"
Have you googled the error message "write time out , device may be disconnected"? There are a few suggestions.
bjlabuk said:
Have you googled the error message "write time out , device may be disconnected"? There are a few suggestions.
Click to expand...
Click to collapse
Yes mate , i tried everything searching on Google , can you please help me mate
I haven't experienced your problem. Could the message relate to the EDL connection? I found this link https://www.droidwin.com/unbrick-xiaomi-fix-device-stuck-in-edl-mode-via-qfil-tool/
So (i) when you used Mi Flash Tool did you use 'clean all' or 'clean all and lock'? - that might explain the locked bootloader. (ii) Did you check in Device Manager as per the link I have given? (iii) have you tried the patched firehose file method, as per https://www.droidwin.com/unbrick-mi-a3-fastboot-commands/ ?
Can't suggest anything else other than a repair shop where someone with more experience might be able to sort it.
bjlabuk said:
I haven't experienced your problem. Could the message relate to the EDL connection? I found this link https://www.droidwin.com/unbrick-xiaomi-fix-device-stuck-in-edl-mode-via-qfil-tool/
So (i) when you used Mi Flash Tool did you use 'clean all' or 'clean all and lock'? - that might explain the locked bootloader. (ii) Did you check in Device Manager as per the link I have given? (iii) have you tried the patched firehose file method, as per https://www.droidwin.com/unbrick-mi-a3-fastboot-commands/ ?
Can't suggest anything else other than a repair shop where someone with more experience might be able to sort it.
Click to expand...
Click to collapse
Thanks mate for your assistance , i guess last time i flash the device i mistakenly use " clean all and lock"
The device is in edl mode as the port is recognised in the device manager and yes i tried the patched firehose , got the same error "write time out may be device was disconnected"
Okay, how about trying to get out of EDL mode? https://www.droidwin.com/how-to-exit-edl-mode-in-android/ Can you do that?
If you can get out of EDL mode then try flashing the STOCK ROM using the platform-tools, not Mi Flash Tool! https://www.thecustomdroid.com/xiao...2a11363abaea7ed177f9037d4693fae#comment-33230
You will get the latest fastboot images here https://xiaomifirmwareupdater.com/miui/laurel/
bjlabuk said:
Okay, how about trying to get out of EDL mode? https://www.droidwin.com/how-to-exit-edl-mode-in-android/ Can you do that?
If you can get out of EDL mode then try flashing the STOCK ROM using the platform-tools, not Mi Flash Tool! https://www.thecustomdroid.com/xiao...2a11363abaea7ed177f9037d4693fae#comment-33230
You will get the latest fastboot images here https://xiaomifirmwareupdater.com/miui/laurel/
Click to expand...
Click to collapse
My Device is hardbrick so I guess doing it using platform tools won't work
Pyro556 said:
My Device is hardbrick so I guess doing it using platform tools won't work
Click to expand...
Click to collapse
Okay, if it is stuck in EDL mode the only think I can think of is to try using QFIL but you will need to search for the stock firmware for your device in 'Flat Build format' - see attached link and instructions https://www.droidwin.com/unbrick-xiaomi-fix-device-stuck-in-edl-mode-via-qfil-tool/
I have successfully unbricked a Wileyfox Swift 2 recently using the QFIL method.
I did try the qflash , it shows
download fail firehose fail fhloader fail process fail
Are you using QFIL from within QPST? https://forum.hovatek.com/thread-30141.html
Also download the Engineering ROM from here. It has the firehose file. https://mifirm.net/downloadfile/66
You're leaving it in edl too long. Hold down the power button for a full 30 seconds. Seriously, count. Now, hold vol up and down for the same. Attach the cable. Release volume buttons. Now, you are freshly in edl. It should work. If you go QFIL, you will need to do this in between each patch.
Check out this link on Sahara: https://www.droidwin.com/fix-sahara-fail-qsaharaserver-fail-process-fail-error-qfil-tool/
Also, you mind posting your patched programmer file? Been having trouble with that.
Eliliyah said:
Also, you mind posting your patched programmer file? Been having trouble with that.
Click to expand...
Click to collapse
Who are you asking? Not sure which file you are referring to?
bjlabuk said:
Are you using QFIL from within QPST? https://forum.hovatek.com/thread-30141.html
Also download the Engineering ROM from here. It has the firehose file. https://mifirm.net/downloadfile/66
Click to expand...
Click to collapse
i will try using this rom let's see
After installing some roms I decided to flash the stock rom using Mi flash tool, but the flash tool gave many errors, I tried many times to flash it, and then I decided to reboot the phone in fastboot mode to see if that solved something, but from that moment the phone did not turn on again, and it did not enter fastboot or recovery mode.
After a moment I connected the phone to the pc and saw that a device appeared "Qualcomm HS-USB QDLoader 9008".
Then I looked for solutions on the internet and when I tried some of those solutions, I realized that the flash tool sometimes when I clicked the "flash" button did nothing, when you clicked it again it showed errors, but if you clicked the "flash" button and then the "refresh" button the flashing progress appeared, so I thought that's why my redmi note 10 was hard bricked, because I closed many times the flash tool when it was flashing.
I thank you in advance for any help. Any idea how to fix it?
ajanco said:
After installing some roms I decided to flash the stock rom using Mi flash tool, but the flash tool gave many errors, I tried many times to flash it, and then I decided to reboot the phone in fastboot mode to see if that solved something, but from that moment the phone did not turn on again, and it did not enter fastboot or recovery mode.
After a moment I connected the phone to the pc and saw that a device appeared "Qualcomm HS-USB QDLoader 9008".
Then I looked for solutions on the internet and when I tried some of those solutions, I realized that the flash tool sometimes when I clicked the "flash" button did nothing, when you clicked it again it showed errors, but if you clicked the "flash" button and then the "refresh" button the flashing progress appeared, so I thought that's why my redmi note 10 was hard bricked, because I closed many times the flash tool when it was flashing.
I thank you in advance for any help. Any idea how to fix it?
Click to expand...
Click to collapse
have to get someone with authorized account to fix it using edl flash tool, from next time dont use miflash and just extreact the rom zip and flash it with the bat file.
ajanco said:
After installing some roms I decided to flash the stock rom using Mi flash tool, but the flash tool gave many errors, I tried many times to flash it, and then I decided to reboot the phone in fastboot mode to see if that solved something, but from that moment the phone did not turn on again, and it did not enter fastboot or recovery mode.
After a moment I connected the phone to the pc and saw that a device appeared "Qualcomm HS-USB QDLoader 9008".
Then I looked for solutions on the internet and when I tried some of those solutions, I realized that the flash tool sometimes when I clicked the "flash" button did nothing, when you clicked it again it showed errors, but if you clicked the "flash" button and then the "refresh" button the flashing progress appeared, so I thought that's why my redmi note 10 was hard bricked, because I closed many times the flash tool when it was flashing.
I thank you in advance for any help. Any idea how to fix it?
Click to expand...
Click to collapse
hey
I brought mi phone for my aunt and she is facing similar issues too. If you find any solutions do let me know.
ScarletSkies1234 said:
have to get someone with authorized account to fix it using edl flash tool, from next time dont use miflash and just extreact the rom zip and flash it with the bat file.
Click to expand...
Click to collapse
Yes, today, I have been looking for solutions and I see that paying someone with authorized account is the only way to get my phone back. :C ....I didn't know you could flash without the Mi flash tool, thanks, I will try in the future....
msgranger12 said:
hey
I brought mi phone for my aunt and she is facing similar issues too. If you find any solutions do let me know.
Click to expand...
Click to collapse
Hi, I told you that I fixed my phone with the "Xiaomi Pro Tool" (it's paid but cheap). Good luck!
ajanco said:
Yes, today, I have been looking for solutions and I see that paying someone with authorized account is the only way to get my phone back. :C ....I didn't know you could flash without the Mi flash tool, thanks, I will try in the future....
Click to expand...
Click to collapse
My friend tried to flash fastboot image using official android platform tools from google, build march 2022, it didn't work. Always failed when flashing the super partition. Fortunately, he decided to flash it with mi flash build 2020 (forgot which one), and it succeeded. I didn't believe it at first. Weird indeed. I believe xiaomi put something else to their fastboot binary in the mi flash.
ajanco said:
After installing some roms I decided to flash the stock rom using Mi flash tool, but the flash tool gave many errors, I tried many times to flash it, and then I decided to reboot the phone in fastboot mode to see if that solved something, but from that moment the phone did not turn on again, and it did not enter fastboot or recovery mode.
After a moment I connected the phone to the pc and saw that a device appeared "Qualcomm HS-USB QDLoader 9008".
Then I looked for solutions on the internet and when I tried some of those solutions, I realized that the flash tool sometimes when I clicked the "flash" button did nothing, when you clicked it again it showed errors, but if you clicked the "flash" button and then the "refresh" button the flashing progress appeared, so I thought that's why my redmi note 10 was hard bricked, because I closed many times the flash tool when it was flashing.
I thank you in advance for any help. Any idea how to fix it?
Click to expand...
Click to collapse
Xiaomi Flash tool support EDL flashing too...try this version....and also install the Qualcomm driver.