hey guyz,
okaey let me tell you my honor 4c had twrp recovery image ...i was trying to reset my device and unfortunately it went wrong
and was showing no os installed
at that time it could detect by adb
and i tried to replace twrp img to the stock and all went succesfull
but as i reboot it i am unable to go recovery mode its showing error : recovery img failed and then i tried to back to twrp again but what is happening ??? i am getting stuck the adb could not find my phone (not detecting) mtp driver also not working proprly
check the pictures for more info
please help me
Related
Hi guyz im new 2 xda
I have a serius prob actualy i have karbonn a1(clone of zte n721and also have same hardware and software of huawei pulse mini and huawei u8150) problem is that my device is stucked on boot logo and nothing is working like i tried to go into recovery mode and also in bootloader mode but no luck. also tried from pc with adb and fastboot but it also not worked (whenever i connect my phone to pc it automaticaly detected as adb interface)i also installed usb drivers correctly n still no luck
This happend when i tried to flash recovery n boot image via terminal emulater... when it giving me out of space error i rebooted my cell n this happend.... plz plz plz help me guyz
what exactly did u do ???u tried to flash cwm ?
No i mean i already succesfuly flashed cwm but still i could not go into recovery mode so i thought flashing custom recovery and boot image can solve this problem n then i tried to flash these 2 images via terminal emulater but then i got out of space error while flashing so i rebooted my cell n stucked on boot logo
did u try flashing othr custom rom ?
How can i flash other rom even i cant go into recovery mode
I was upgrading the current Stock rom on my ZTE Nubia Z5s Mini, I went through the recovery mode to load the new rom and got a message saying that the rom installed correctly, I rebooted the device and now its stuck at the MIUI logo or if I try to load the recovery mode I get the Nubia logo just to load back to the miui logo again. I got the rom from the MIUI site its v5.
I've left the phone for over an hour hoping it was just loading up but no change, the phone heats up and even has a charger screen when plugged in.
Anyway to get back into the recovery mode to load the original rom again or any other way of fixing this? help :crying:
I've no idea how to help you with this but I'm bumping the thread because I know how you feel.
Sent from my HUAWEI Y536A1
I'm trying to flush the rom by using adb but with an issue, even thou my device is recognized as Nubia Z5s Mini in device manager it still gives a driver error "these have been installed" and in cmd adb it does not see the device.
Update : Got drivers for install from Clockwordmod website but it will only accept the drivers if I set the phone as a modem in device manager when installing them, still not recognized by adb using CMD.
Solved driver issue and qusb_download issue, ADB drivers are done through all drives in device manager pointing to the Google USB drivers and select adb interface then run CMD from within the Google SDK program folder in platform-tools to read the device.
Now using emmc but need to generate EMMCBLD.HEX & 7x30_msimage.mbn if anyone can help, I can enter adb using recovery mode but blocked from making changes in fastboot mode, currently in download mode which can see a drive H but need the two files to proceed any further.
Hello every one
hope that some one cna help me with this problem
I Have this phone from Rt Project - MIG, i was trying to upload the Rom that i have with the ADB sideload, because since it is not a recognize brand it does not have any recoveries available. And the phone comes with the recovery 3e
When i put my device on the option apply update from ADB
entre de comman ADB sideload (ROMNAME)
it starts loading the rom but excatly when it gets to 68% the phone it seems to restarts a get to the recovery menu and it stops loading the rom
after that i get the message "failed to write data 'protocol fault'
Can someone help me out with that
hi, can you shared the rom, I have the same phone, but I need the rom or u can share the link or webside to download it, thanks
Hi everybody,
hope one of you can help me. cause i have no idea, what else i can do.
my problem is following:
i installed TWRP into my new ZUK Z1 to root it. than i wanted to install the CM nightlies on my phone and so i installed CWN. and than everything went wrong. first i made a backup of my system on CWN. and than i tried to install nightlies ROM and i got a error
"This package is for device: Z1; this device is jfltexx"
E: Error in /data/media/0/roms/cm-12.1-20151113-NIGHTLY-ham.zip
(Satus 7)
Installation aborted
than i thought i should restore my backup. and since than i have only a loop in the boot animation. i cant enter the COS.
even when i try to connect to my phone under windows 7 via adb i have a problem, cause even windows 7 thinks now, that my ZUK Z1 is a samsung (jfltexx is a samsung device)
so i thought i should give it a try in linux. in linux adb find my device but i cant enter fastboot to flash twrp back or the old system recovery.
what can i do now? cause i can enter CWN, i can use adb sideload but also adb push, but nothing else. is there any possiblity to install the twrp via CWN (cause i cant use fastboot).
hope you can help me, cause i need that phone soon
thx and greetings from vienna
Wassup aliens!
So I got this gionee M3 and I rooted it with iRoot and tried to flash recovery in nearly every way possible....... I tried using Flashify, Rashr, TWRP manager..... Nothing worked.
1) On Flashify: I kept selecting Flash recovery but the message I get every time is "Error copying the file, please send me the log file".
2) On Rashr and TWRP Manager: They both say they flashed the file but when I boot into recovery all I see is gray screen with a gionee logo. I also lost my stock recovery this way.
3) On PC: My PC never detects my phone as an adb or VCom device........To check for VCom I tried SP Flash Tools..... didn't detects the device. For Adb I tried Adb devices in command prompt but the devices list is empty.
Some info:
I have USB debug mode enabled.
I have stock 5.0.2 android rom with no recovery just factory safe mode through which I can perform some tasks.
If you need any pics or any info just tell me in the comments.
I hope you guys help me.... Been trying for the last 6 days.
HELP ASAP SOS
Love,
Justin Biebar
Tarun0101 said:
Wassup aliens!
So I got this gionee M3 and I rooted it with iRoot and tried to flash recovery in nearly every way possible....... I tried using Flashify, Rashr, TWRP manager..... Nothing worked.
1) On Flashify: I kept selecting Flash recovery but the message I get every time is "Error copying the file, please send me the log file".
2) On Rashr and TWRP Manager: They both say they flashed the file but when I boot into recovery all I see is gray screen with a gionee logo. I also lost my stock recovery this way.
3) On PC: My PC never detects my phone as an adb or VCom device........To check for VCom I tried SP Flash Tools..... didn't detects the device. For Adb I tried Adb devices in command prompt but the devices list is empty.
Some info:
I have USB debug mode enabled.
I have stock 5.0.2 android rom with no recovery just factory safe mode through which I can perform some tasks.
If you need any pics or any info just tell me in the comments.
I hope you guys help me.... Been trying for the last 6 days.
HELP ASAP SOS
Love,
Justin Biebar
Click to expand...
Click to collapse
Hey i have the same problem. Can you suggest me something regarding this.
A very big question
Hello! I have an argentine copy of the M3, called Hyundai Ultra Energy, same processor, same storage, camera quality, all in the same place. My question is how do I install a custom rom and how do I flash the recovery at first. I use adb commands, but I know that I have to do it with spflash. How is the process? I download the rom, charge the scatter and tilt only in recovery? Would be dangerous? Is more safe to root with King Root?